10150-72B2PC 概述
3M Mini D Ribbon (MDR) Connectors 3M微型D丝带( MDR )连接器
10150-72B2PC 数据手册
通过下载10150-72B2PC数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载3M™ Mini D Ribbon (MDR) Connectors
.050″ Boardmount Through-Hole Right Angle Plug - Shielded
101 Series
• Wiper-on-wiper contact for reliable
repetitive plugging
• Rugged die cast metal case construction
• Screw or ground lock PCB retention
• Normal and reverse “D” interface options for
board to board flexibility
• IEEE 1284C Interface as a 36 contact connector
• Contacts: 20, 26, 36 and 50
• See Regulatory Information Appendix (RIA)
for chemical compliance information
TS-0620-B
Date Modified: November 26, 2007
Sheet 1 of 4
Physical
Insulation Material:
Flammability:
Color:
Glass Reinforced Polyester Body
UL 94V-0
Black
Contact Material:
Plating
Copper Alloy
Underplating:
Wiping Area:
Solder Tail Plating:
Body Material:
Plating
80 μ″ [ 2.0 μm ] Min. Nickel
30 μ″ [ 0.76 μm ] Min. Gold
Gold flash over Nickel (RIA E1 & C1 apply)
Zinc Alloy
Nickel
Ground Lock
Material:
Copper Alloy
Plating:
Tin in combination with Gold flash plated tail
3M Logo and Part Number
Marking:
Electrical
Current Rating:
Insulation Resistance:
Withstanding Voltage:
1 A
8
> 5 × 10 Ω at 500 VDC
500 VRMS for 1 Minute
Environmental
Temperature Rating:
-20°C to +85°C
Process Rating:
Solder Dip Test - 260°C for 10 secs., two times after 100°C max. preheat,
60 sec. max. duration
UL File No.: E68080
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Mini D Ribbon (MDR) Connectors
.050″ Boardmount Through-Hole Right Angle Plug - Shielded
101 Series
Dimensions
Contact
Quantity
A
B
C
D
20
26
36
50
.450 [11.43]
.600 [15.24]
.850 [21.59]
1.200 [30.48]
.71 [18.1]
.87 [22.0]
1.11 [28.3]
1.46 [37.2]
1.081 [27.45]
1.231 [31.26]
1.481 [37.61]
1.831 [46.5]
1.31 [33.3]
1.46 [37.2]
1.71 [43.5]
2.06 [52.4]
.12
[3.0]
2X PCB Lockdown Thread
(see ordering information)
.15
[3.8]
.34
[8.6]
3X .075
[1.91]
.65
[16.5]
.188
[4.79]
.18
[4.8]
.31
[7.9]
.01
[0.3]
Position 1
.33
[8.4]
D
C
.26
[6.6]
.38
[9.7]
.36
[9.1]
2X Panel Thread
(see ordering
information)
.19
[4.8]
.02
[0.5]
.15
[3.8]
15°
.01
Position
[0.2]
.050
[1.27]
Last
Position
A
Optional Ground Lock
2X
B
(see ordering
information)
Normal Type
(see ordering information)
Inch
[m m ]
Tolerance U nless N oted
.0
.00
.000
Reverse Type
(see ordering information)
inch ±.1
±.01 ±.005
[ ] D im ensions for R eference
O nly
Ordering Information
101XX-X2X2PC
Panel/Board Retention Feature
20, 26, 36 pos:
Contact Quantity
1 = M2.5 panel/M2.5 screw lock
B = M2.5 panel/ground lock
50 pos:
4 = 4-40 panel/4-40 screw lock
E = 4-40 panel/ground lock
Mounting Feature
5 = Boardmount Right Angle Normal Type
7 = Boardmount Right Angle Reverse Type
TS-0620-B
Sheet 2 of 4
Use (M2.5 x 8 mm) screws to mount to panel with max. thickness of .079 [2.0].
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Mini D Ribbon (MDR) Connectors
.050″ Boardmount Through-Hole Right Angle Plug - Shielded
101 Series
Recommended Board Layout (Normal Type Plug)
(Plug viewed from connector side; receptacle viewed from bottom side)
Dimensions
B
Contact
Quantity
A
C
20
26
.450 [11.43]
1.081 [27.45]
.93 [23.7]
Boardmount Plug
(Right Angle Normal type)
101XX-52X2
.600 [15.24]
1.231 [31.26]
1.08 [27.5]
Receptacle
(Right Angle type)
102XX-5XXX
36
50
.850 [21.59]
1.481 [37.61]
1.831 [46.50]
1.33 [33.9]
1.200 [30.48]
1.685 [42.80]
.57
[14.5]
For 26 or 50 Position Plug Only
For 20 or 36 Position Plug Only
2X Mounting Holes
(See Note 1)
2X Mounting Holes
(See Note 1)
.35
.35
[9.0]
[9.0]
2X .16
2X 0.16
[4.0]
3X .075
[1.91]
[4.0]
3X .075
[1.91]
2X .20
[5.0]
2X .20
[5.0]
Position 2
Position 3
Position 2
A
B ± .004
A
.050
[1.27]
Position 3
B ± .004
.050
[1.27]
Position 1
Position
∅ .028 ± .003 Typ
[0.71]
Position 1
Position
Position 2
Position 3
Position 2
Position 3
.04
[1.1]
.04
[1.1]
Connecting with
Position 1
Connecting with
Position 1
Connecting with
Row
.19 Max
[4.8]
Connecting with
Position
.19 Max
[4.8]
R .060
[1.52]
.340 ± .004
[ 8.64 ]
C ± .004
B ± .004
Notes:
1. Plated-through PC board mounting Holes for 0.062
[1.57] board thickness:
Grounding Flange (Screw Lock) - ∅ .110 ± .003 [2.79]
(20, 26, 36 pos)
Ground Lock - ∅ .100 ± .003 [2.54]
Grounding Flange (Screw Lock) - ∅ .120 ± .003 [3.05]
(50 pos)
Recommended Panel Cut-Out
(See Notes)
TS-0620-B
Sheet 3 of 4
2. Panel thickness .079 [2.00] Max.
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Mini D Ribbon (MDR) Connectors
.050″ Boardmount Through-Hole Right Angle Plug - Shielded
101 Series
Dimensions
B
Contact
Quantity
A
C
Recommended Board Layout (Reverse Plug)
20
26
.450 [11.43]
1.081 [27.45]
.93 [23.7]
(Plug viewed from Connector side Receptacle viewed from bottom side)
.600 [15.24]
1.231 [31.26]
1.08 [27.5]
Receptacle
(Right Angle type)
102XX-5XXX
Boardmount Plug
(Right Angle Reverse type)
36
50
.850 [21.59]
1.481 [37.61]
1.831 [46.50]
1.33 [33.9]
101XX-72X2
1.200 [30.48]
1.685 [42.80]
.57
[14.5]
For 20 or 36 Position Plug Only
For 26 or 50 Position Plug Only
Connecting with
Position 1
.35
[9.0]
Position 3
Position 2
.35
[9.0]
Connecting with
Position 1
Position 2
Position 3
Connecting with
Row
Connecting with
Row
Row
Row
Position 1
Position 2
Position 3
Position 1
.050
[1.27]
Position 2
Position 3
.050
[1.27]
A
A
B ± .004
2X .20
[5.0]
2X .20
[5.0]
B ± .004
∅ .028 ± .003
[0.71]
∅ .028 ± .003
[0.71]
2X .16
[4.0]
2X .16
[4.0]
.04
[1.1]
.04
[1.1]
2X Mounting Holes
(See Note 1)
.19 Max
[4.8]
2X Mounting Holes
(See Note 1)
.19 Max
[4.8]
3X .075
[1.91]
3X .075
[1.91]
Notes:
1. Plated-through PC board mounting Holes for 0.062
[1.57] board thickness:
Grounding Flange (Screw Lock) - ∅ .110 ± 0.003
[2.8] (20, 26, 36 pos)
Ground Lock - ∅ .100 ± 0.003 [2.6]
Grounding Flange (Screw Lock) - ∅ .120 ± 0.003
[3.0] (50 pos)
R .060
[1.52]
.340 ± .004
[8.64]
C ± .004
B ± .004
Recommended Panel Cut-Out
TS-0620-B
Sheet 4 of 4
2. Panel thickness .079 [2.00] Max.
(See Notes)
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/717/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217B-c
Appendix E5: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under
Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means
that the product or part does not contain any of the following substances in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
RIA-2217B-c
Appendix C3: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3
3M Electronics
Interconnect Products
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
Please recycle. Printed in USA.
© 3M 2007. All rights reserved.
RIA-2217B-c
1-800-225-5373
www.3m.com/interconnects
3M is a trademark of 3M Company.
10150-72B2PC 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
10150-72B2VC | 3M | 3M Mini D Ribbon (MDR) Connectors | 获取价格 | |
10150-72E2PC | 3M | 3M Mini D Ribbon (MDR) Connectors | 获取价格 | |
10150-72E2VC | 3M | 3M Mini D Ribbon (MDR) Connectors | 获取价格 | |
10150-8000EE | 3M | 050, Mini D Ribbon (MDR) Connectors | 获取价格 | |
10150-8100EE | 3M | 050, Mini D Ribbon (MDR) Connectors | 获取价格 | |
10150-900APL | 3M | 50 CONTACT(S), MALE, OTHER D TYPE CONNECTOR, SURFACE MOUNT, PLUG, ROHS COMPLIANT | 获取价格 | |
101502T150BF2B | CDE | CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 150V, 5000uF, CHASSIS MOUNT | 获取价格 | |
101502U050AA2B | CDE | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 75% +Tol, 10% -Tol, 5000uF, Chassis Mount | 获取价格 | |
101503U020AF2B | CDE | CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 20V, 50000uF, CHASSIS MOUNT | 获取价格 | |
101506-000 | ETC | Battery and Connector Probes | 获取价格 |
10150-72B2PC 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6