10214-R20CFB [3M]
3M™ Mini D Ribbon (MDR) Connectors; 3M™微型D丝带( MDR )连接器型号: | 10214-R20CFB |
厂家: | 3M ELECTRONICS |
描述: | 3M™ Mini D Ribbon (MDR) Connectors |
文件: | 总6页 (文件大小:1361K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3M™ Mini D Ribbon (MDR) Connectors
.050” Boardmount Compliant Pin Vertical Receptacle - Shielded
102 Series
•ꢀ Wiper-on-wiper contact for reliable repetitive plugging
•ꢀ Rugged die cast metal case construction
•ꢀ Contacts: 14, 20, 26, 36, 40, 50, 68 and 80
•ꢀ See Regulatory InformationAppendix (RIA) for chemical
compliance information.
Date Modified: November 13, 2008
TS-0961-C
Sheet 1 of 3
Physical
Glass Reinforced Polyester (PBT)
Insulation Material:
Flammability: UL 94V-0
Color: Black
CopperAlloy
Contact Material:
Plating
Underplating: 80 μ” [ 2.0 μm ] Nickel
WipingArea: See Ordering Information
Compliant Tails: See Ordering Information
Body
Material: ZincAlloy
Plating: Nickel
Shroud & Latch Hook
Material: Steel
Plating: Nickel
3M Logo and Part Number
Marking:
Electrical
1A
Current Rating:
Insulation Resistance:
Withstanding Voltage:
> 5 × 108Ω at 500VDC
500VRMS for 1 Minute
Environmental
-20°C to +85°C
Temperature Rating:
UL File No.: E68080
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M™ Mini D Ribbon (MDR) Connectors
.050” Boardmount Compliant Pin Vertical Receptacle - Shielded
102 Series
Dimension
Contact
Quantity
A
B
C
D
E
14
20
26
36
40
50
68
80
.300 [ 7.62 ]
.450 [ 11.43 ]
.600 [ 15.24 ]
.850 [ 21.59 ]
.950 [ 24.13 ]
1.200 [ 30.48 ]
1.650 [ 41.91 ]
1.950 [ 49.53 ]
.93 [ 23.6 ]
1.08 [ 27.45 ]
1.23 [ 31.3 ]
1.48 [ 37.6 ]
1.58 [ 40.2 ]
1.83 [ 46.5 ]
2.28 [ 57.9 ]
2.58 [ 65.6 ]
1.16 [ 29.5 ]
1.31 [ 33.4 ]
1.46 [ 37.2 ]
1.71 [ 43.5 ]
1.81 [ 46.1 ]
2.06 [ 52.4 ]
2.51 [ 63.8 ]
2.81 [ 71.5 ]
.50 [ 12.6 ]
.65 [ 16.4 ]
.80 [ 20.2 ]
1.05 [ 26.6 ]
1.15 [ 29.1 ]
1.40 [ 35.5 ]
1.85 [ 46.9 ]
2.15 [ 54.5 ]
.77 [ 19.5 ]
.92 [ 23.4 ]
1.07 [ 27.2 ]
1.32 [ 33.5 ]
1.42 [ 36.1 ]
1.67 [ 42.4 ]
2.12 [ 53.8 ]
2.42 [ 61.5 ]
.075
[ 1.91 ]
C
B
.075
[ 1.91 ]
A
.050 [ 1.27 ]
.075
[ 1.91 ]
.016
[ 0.40 ]
.23
[ 5.8 ]
.19
[ 4.8 ]
.160
[ 4.00 ]
D
E
.21
[ 5.2 ]
.05
[ 1.3 ]
.05
[ 1.3 ]
.28
[ 7.2 ]
Position 2
Position 1
(2X) Lockstand Thread
see ordering information
below
.36
[ 9.1 ]
.25
[ 6.3 ]
.050
[ 1.27 ]
.18
[ 4.6 ]
Inch
[mm]
Tolerance Unless Noted
Position
Last Position
15°
.0
.00
.000
Inch ±.1 ±.01 ±.005
[ ] Dimensions for
Note:
1. Use mounting screws to PCB when using Junction Shells.
Reference Only
Ordering Information
102XX - R2XX XX
Contact Quantity
Wiping Area Plating
(See Table)
S = 30 μ” [0.76 μm] Min. Gold
FB = 8 μ” [0.2 μm] Min. Gold
with Lubricant
Lockstand Thread
0 = M2.6 (Special order)
1 = M2.5 (Standard)
PCB Press Fit Hole Compatibility
C = Cu/pre-flux PCB holes. Contacts with gold
flash tail plating (App. E1 & C1 apply)
T = Solder plated PCB holes. Contacts with gold
flash tail plating (App. E1 & C1 apply)
Note:
2. Assembly tools: 3M™ Stopper
Block 10991-XX and 3M™
Press Block 10992-XX.
TS-0961-C
Sheet 2 of 3
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M™ Mini D Ribbon (MDR) Connectors
.050” Boardmount Compliant Pin Vertical Receptacle - Shielded
102 Series
Recommended Board Layout Viewed from Connector Side
Dimension
Contact
Quantity
A
B
Position 3
Position 1
Position 2
20, 36, 40, 68 and 80 position
20
36
40
68
80
.450 [ 11.43 ]
.850 [ 21.59 ]
.950 [ 24.13 ]
.931 [ 23.64 ]
1.481 [ 37.61 ]
1.581 [ 40.15 ]
B ± .004
2x0.112
[ 2.86 ]
Hole size: See note
1.650 [ 41.91 ] 2.281 [ 57.93 ]
1.950 [ 49.53 ] 2.581 [ 65.55 ]
.2
A
[ 5.0 ]
.075 Typ
[ 1.90 ]
2x0.20
[ 5.0 ]
Position
.050 Typ
[ 1.27 ]
2x0.16
[ 4.0 ]
2x0.20
[ 5.0 ]
Last Position
2X ∅ .118 ± .003
[ 3.0 ]
(See Note*)
*Note: Plated-through mounting holes
Dimension
Contact
Quantity
C
D
14
20
26
36
40
50
68
80
.78 [ 20.0 ]
.94 [ 23.9 ]
1.09 [ 27.6 ]
1.33 [ 33.9 ]
1.44 [ 36.5 ]
1.69 [ 42.8 ]
2.13 [ 54.2 ]
2.44 [ 61.9 ]
.93 [ 23.64 ]
1.08 [ 27.45 ]
1.23 [ 31.26 ]
1.48 [ 37.61 ]
1.58 [ 40.15 ]
1.83 [ 46.50 ]
2.28 [ 57.93 ]
2.58 [ 65.55 ]
.340 ± .004
[ 8.64 ]
R .060
[ 1.52 ]
C ± .004
D ± .004
Recommended Panel Cut-Out
Note: Panel thickness .079 [ 2.00 ] Max.
Notes:
14, 26, 50 pos only
1. Listed below are the PCB hole sizes and tolerances recommended for
use with the 3M MDR Compliant Pin Vertical Receptacle. The insertion
force is designed not to exceed 147N (33lbs) per pin
Position 3
B ± .004
2x0.112
[ 2.86 ]
Recommended Hole Size in Millimeters:
Position 1
Position 2
Hole size: See Notes
For Copper plus Pre-Flux Coated PBC Holes
Option 1
.20
[ 5.00 ]
a. Drilled Dia. 0.85 +0/-0.020 mm
b. Finished Dia. 0.68 to 0.79 mm
c. Cu Plating 0.025 mm minimum
Option 2
A
a. Drilled Dia 0.80 +0.025/-0.020 mm
b. Finished Dia 0.68 to 0.78 mm
c. Cu Plating 0.025 mm minimum
.075 Typ
[ 1.90 ]
For Copper and Solder Plated PCB Holes
Option 1
2x0.20
[ 5.0 ]
.050 Typ
[ 1.27 ]
Position
a. Drilled Dia. 0.85 +0.03/-0.03 mm
b. Finished Dia. 0.65 to 0.81 mm
c. Tin Lead Plating 0.015 mm maximum
Option 2
2X ∅ .118 ± .003
[ 3.0 ]
(See Note*)
Last Position
2x0.16
[ 4.0 ]
2x0.20
[ 5.0 ]
a. Drilled Dia0.80 +0.02/-0.02mm
b. Finished Dia0.68 to 0.81mm
c. Cu Plating0.015mm minimum
Contact
Quantity
A
B
2. Board thickness: .095 ± .010 to .125 ± .010
14
26
50
.300 [ 7.62 ]
.931 [ 23.64 ]
1.231 [ 31.26 ]
3. Assembly Tooling:
(See Ordering Information)
.600 [ 15.24 ]
1.200 [ 30.48 ] 1.831 [ 46.50 ]
TS-0961-C
Sheet 3 of 3
*Note: Plated-through mounting holes
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC, as amended by EU Commission Decision 2005/717/EC, as amended by
EU Court of Justice Decision 2008/C 116/04
This product contains decaBDE in the insulating material in excess of the maximum concentration allowed for finished
products subject to EU RoHS that are placed on the EU market after June 30, 2008.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217B-E
Appendix E5: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under
Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the
product or part does not contain any of the following substances in excess of the following maximum concentration values in any
homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated
diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or
polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
RIA-2217B-E
Appendix C3: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or
polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3m.com/interconnects
Please recycle. Printed in USA.
© 3M 2008. All rights reserved.
RIA-2217B-E
3M is a trademark of 3M Company.
相关型号:
©2020 ICPDF网 联系我们和版权申明