151226-2320-TH [3M]
Board Connector, 26 Contact(s), 2 Row(s), Male, Straight, 0.079 inch Pitch, Surface Mount Terminal, Natural Insulator, Receptacle;型号: | 151226-2320-TH |
厂家: | 3M ELECTRONICS |
描述: | Board Connector, 26 Contact(s), 2 Row(s), Male, Straight, 0.079 inch Pitch, Surface Mount Terminal, Natural Insulator, Receptacle |
文件: | 总6页 (文件大小:1925K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3M™ Pin Strip Header
2 mm × 2 mm Solder Tail Straight & Right Angle, Surfacemount Straight
1512 Series
• Industry standard compatible
• High temperature dielectric
• "No lead" wave and reflow solder
compatible
• Unique lengths available
• Maximizes use of PC board space
• Mates with boardmount and wiremount
products
• End stackable feature
• Side stackable feature
• Tape and reel packaging option available
• See Regulatory Information Appendix
for chemical compliance information
Date Modified: February 3, 2007
TS-0808-08
Sheet 1 of 4
Physical
Insulator
Material:
High Temperature Thermoplastic (PCT or LCP)
UL 94V-0
Black
Flammability:
Color:
Contact
Material:
Plating
Copper Alloy
Underplating:
Wiping Area:
Solder Tails:
Marking:
100 µ″ [ 2.54 µm ] Nickel
30 µ″ [ 0.76 µm ] Gold
300 µ″ [ 7.6 µm ] Matte Tin or 200 µ″ Tin-Lead
None
Electrical
Current Rating:
Insulation Resistance:
Withstanding Voltage:
1.5 A
9
> 1 × 10 Ω at 250 VDC
500 VRMS at Sea Level
Environmental
Temperature Rating:
-55°C to +105°C
Maximum 260°C (per J-STD-020C)
1 (per J-STD-020C)
Process Rating:
Moisture Sensitivity Level:
UL File No.: E68080
3
Interconnect Solutions
3M is a trademark of 3M Company.
For technical, sales or ordering information call
http://www.3M.com/interconnects/
800-225-5373
3M™ Pin Strip Header
2 mm × 2 mm Solder Tail Straight & Right Angle, Surfacemount Straight
1512 Series
Contact
Straight
Dimension C
Quantity
02
04
06
08
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
.079
.157
.238
C +.000
-.020
.155
.315
[3.94]
.394
.472
.551
.630
.0787
.709
.03
.0787
[2.000]
[2.000
[0.76]
.787
.866
.059
[1.50]
.945
A ± .008
1.024
1.102
1.181
1.280
1.339
1.417
1.496
1.575
1.654
1.732
1.811
1.890
1.969
2.047
2.126
2.205
2.283
2.382
.118 ± .010
.009 ± .001
[0.23]
.0787 ± .003
[2.000]
R .040
[1.02]
4 Sides, Crown
.0204 ± .0003
[0.518]
.0787 ± .003
[2.000]
R .0020
[0.050]
∅.032 ± .003
.0244 ± .0005
[0.620]
[0.81]
After Plating
Pin Cross Section
Recommended Mounting
Hole Pattern
Inch
[m m ]
Tolerance U nless N oted
.0
.00
.000
inch ±.1
±.01 ±.005
[ ] D im ensions for R eference
O n
Ordering Information
1512XX-8X22-XX
Plating suffix:
Contact Quantity
(See Table 1)
RB = 30µ" [.76µm] Gold w/Matte Tin solder tails (App. E1 & C1 Apply)
TB = 30µ" [.76µm] Gold w/Tin-lead solder tails (App. E3 & C2 Apply)
TH = 15µ" [.38µm] Gold w/Tin-lead solder tails (App. E3 & C2 Apply)
Pin Length
Dim ‘A'
3 = .130″
4 = .152″
TS-0808-08
Sheet 2 of 4
3
Interconnect Solutions
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
http://www.3M.com/interconnects/
3M™ Pin Strip Header
2 mm × 2 mm Solder Tail Straight & Right Angle, Surfacemount Straight
1512 Series
Contact
Dimension C
Right Angle
Quantity
02
04
06
08
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
.079
.157
.238
.315
.394
.472
.118 ± .010
.551
.165
[4.19]
.630
.157
C +.000
-.020
[3.99]
.709
.0787
[2.000]
.787
.866
.945
1.024
1.102
1.181
1.280
1.339
1.417
1.496
1.575
1.654
1.732
1.811
1.890
1.969
2.047
2.126
2.205
2.283
2.382
.047
[1.19]
.015
[0.38]
.0787
.0787
[2.000]
[2.000]
Standoff
.068
[1.73]
.029
[0.74]
A ± .008
R .040
[1.02]
.0787 ± .003
[2.000]
4 Sides, Crown
.0204 ± .0003
[0.518]
.0787 ± .003
[2.000]
R .0020
[0.050]
∅.032 ± .003
.0244 ± .0005
[0.81]
[0.620]
After Plating
Inch
[m m ]
Recommended
Pin Cross Section
Mounting Hole Pattern
Tolerance U nless N oted
.0
.00
.000
inch ±.1
±.01 ±.005
[ ] D im ensions for R eference
O n
Ordering Information
1512XX-7X22-XX
Plating suffix:
Contact Quantity
(See Table 1)
RB = 30µ" [.76µm] Gold w/Matte Tin solder tails (App. E1 & C1 Apply)
TB = 30µ" [.76µm] Gold w/Tin-lead solder tails (App. E3 & C2 Apply)
TH = 15µ" [.38µm] Gold w/Tin-lead solder tails (App. E3 & C2 Apply)
Pin Length
Dim A
3 = .130″
4 = .152″
TS-0808-08
Sheet 3 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M™ Pin Strip Header
2 mm × 2 mm Solder Tail Straight & Right Angle, Surfacemount Straight
1512 Series
Contact
Quantity
Tape & Reel
Suffix
Dimension "C"
04
06
08
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
.139 [3.5]
.217 [5.5]
.295 [7.5]
n/a
WB
.374 [9.5]
.453 [11.5]
.531 [13.5]
.611 [15.5]
.689 [17.5]
.768 [19.5]
.847 [21.5]
.925 [23.5]
1.005 [25.5]
1.083 [27.5]
1.162 [29.5]
1.240 [31.5]
1.320 [33.5]
1.398 [35.5]
1.477 [37.5]
1.556 [39.5]
1.634 [41.5]
1.714 [43.5]
1.792 [45.5]
1.870 [47.5]
1.970 [49.5]
2.028 [51.5]
2.107 [53.5]
2.185 [55.5]
2.264 [57.5]
2.344 [59.5]
WC
C +.000
-.020
.155
[ 3.94 ]
.0787 [ 2.00 ]
.03
.0787
[ 0.8 ]
WD
WE
[ 2.00 ]
.059
[ 1.50 ]
A ± .008
.263 ± .02
[ 6.68 ]
.050
.122 Typ
[ 3.10 ]
.030
[ 1.27 ]
[ 0.76 ]
WF
R.040 [ 1.02 ]
4 Sides, Crown
.310
[ 7.87 ]
R.0020
[ 0.05 ]
.0204 ± .0003
[ 0.518 ]
WG
.0787
[ 2.00 ]
Recommended PCB Pad Layout
.0244 ± .0005
[ 0.620 ]
Inch
[m m ]
Pin Cross Section
Tolerance U nless N oted
.0
.00
.000
inch ±.1
±.01 ±.005
[ ] D im ensions for R eference
O n
Note: Tape and Reel not available on all sizes, please call.
Ordering Information
Packaging suffix:
Blank = Tray Packaging
WX = Tape & Reel Packaging
(see table)
1512XX-2X20-XX-XX
Contact Quantity
(See Table 1)
Plating suffix:
Pin Length Dim A
3 = .130″
RB = 30µ" [.76µm] Gold with Matte Tin solder tails (App. E1 & C1 Apply)
TB = 30µ" [.76µm] Gold with Tin-lead solder tails (App. E3 & C2 Apply)
TH = 15µ" [.38µm] Gold with Tin-lead solder tails (App. E2 & C2 Apply)
4 = .152″
TS-0808-08
Sheet 4 of 4
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/
EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/
EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon
information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/17/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision
2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party
suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217-A
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits
for Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,
means that the product or part does not contain any of the following substances in excess of the following maximum
concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium,
polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise
stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by
third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
20
Appendix C2: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits
for Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,
means that the product or part does contain a substance, as detailed in the chart below, in excess of the following
maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless
otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform
with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in
accordance with the product Warranty stated below.
Name and Content of Hazardous Substances or Elements
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the
accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended
application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s
current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in
writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M MAKES NO
OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s
option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for
any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
3
Electronic Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
800/225-5373
RIA-2217-A
© 3M 2007
www.3M.com/interconnects
相关型号:
151226-2420-RB,-WD
26 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SURFACE MOUNT, ROHS COMPLIANT
3M
151226-2420-RB-WD
26 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SURFACE MOUNT, ROHS COMPLIANT
3M
151226-2420-TH
Board Connector, 26 Contact(s), 2 Row(s), Male, Straight, 0.079 inch Pitch, Surface Mount Terminal, Natural Insulator, Receptacle
3M
151226-7322-TY
HEADER CONNECTOR,PCB MNT,RECEPT,26 CONTACTS,PIN,0.079 PITCH,PC TAIL TERMINAL,NATURAL
3M
151226-7421-TH
Board Connector, 26 Contact(s), 2 Row(s), Male, Right Angle, 0.079 inch Pitch, Solder Terminal, Receptacle
3M
©2020 ICPDF网 联系我们和版权申明