2328-6221-TG
更新时间:2024-10-29 17:36:38
品牌:3M
描述:28 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER
2328-6221-TG 概述
28 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER 集管和边缘连接器
2328-6221-TG 规格参数
是否Rohs认证: | 不符合 | 生命周期: | Active |
Reach Compliance Code: | compliant | ECCN代码: | EAR99 |
HTS代码: | 8536.69.40.40 | 风险等级: | 5.73 |
主体宽度: | 0.2 inch | 主体深度: | 0.259 inch |
主体长度: | 1.4 inch | 主体/外壳类型: | RECEPTACLE |
连接器类型: | BOARD CONNECTOR | 联系完成配合: | GOLD (10) OVER NICKEL (50) |
联系完成终止: | TIN LEAD (100) OVER NICKEL (50) | 触点性别: | MALE |
触点材料: | COPPER ALLOY | 触点模式: | RECTANGULAR |
触点样式: | SQ PIN-SKT | DIN 符合性: | NO |
介电耐压: | 1000VAC V | 滤波功能: | NO |
IEC 符合性: | NO | 绝缘电阻: | 1000000000 Ω |
绝缘体颜色: | BLACK | 绝缘体材料: | GLASS FILLED POLYESTER |
JESD-609代码: | e0 | MIL 符合性: | NO |
插接触点节距: | 0.1 inch | 匹配触点行间距: | 0.1 inch |
混合触点: | NO | 安装方式: | STRAIGHT |
安装类型: | BOARD | 连接器数: | ONE |
PCB行数: | 2 | 装载的行数: | 2 |
最高工作温度: | 105 °C | 最低工作温度: | -55 °C |
选件: | GENERAL PURPOSE | PCB接触模式: | RECTANGULAR |
PCB触点行间距: | 2.54 mm | 电镀厚度: | 10u inch |
额定电流(信号): | 1 A | 参考标准: | UL |
可靠性: | COMMERCIAL | 子类别: | Headers and Edge Type Connectors |
端子长度: | 0.12 inch | 端子节距: | 2.54 mm |
端接类型: | SOLDER | 触点总数: | 28 |
UL 易燃性代码: | 94V-0 | Base Number Matches: | 1 |
2328-6221-TG 数据手册
通过下载2328-6221-TG数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载3M™ Pin Strip Header
.100" and .100" × .100" Straight and RightAngle, Solder Tail
2300 Series
•ꢀ One and two row versions
•ꢀ Straight and right angle versions
•ꢀ Tin lead or gold plating available
•ꢀ Tapered tip does not cut the socket wipe during
insertion, reducing operational failure and repairs
•ꢀ Board retention feature available
•ꢀ Two-row right angle mates with Pak 100 wiremount
sockets anywhere on the board
•ꢀ See Regulatory InformationAppendix (RIA) for
chemical compliance information
Date Modified: August 4, 2008
TS-0766-B
Sheet 1 of 3
Physical
Insulation:
Material: Glass Filled Thermoplastic
Flammability: UL 94V-0
Color: Black
Contact:
Material: CopperAlloy
Plating:
Underplating:
50 μ" [ 1.27 μm ] Nickel
WipingArea: Tin or Gold (See Ordering Information)
Solder Tails: 100 μ" [ 2.54 μm ] 90/10 Tin Lead
None
Marking:
Electrical
3A
Current Rating:
Insulation Resistance:
Withstanding Voltage:
> 5 × 109 Ω at 500VDC
100VRMS at Sea Level
Environmental
55°C to +105°C
Temperature Rating:
UL File No.: E68080
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M™ Pin Strip Header
.100" and .100" × .100" Straight and RightAngle, Solder Tail
2300 Series
Straight
C
C ± .015
(See Note 1)
.100
[2.54]
.050
[1.27]
.100
.100
[2.54]
[2.54]
.050
[1.27]
.050
[1.27]
.025 Sq
[0.64]
A ± .010
A ± .010
.100
[2.54]
.120
.120
[3.05]
[3.05]
.200
[5.08]
D ± .015
(See Note 1)
∅ .040 ± .003
[1.02]
∅ .040 ± .003
[1.02]
(See Note 2)
(See Note 2)
.100 ± .003 Typ
[2.54]
.100 ± .003 Typ
[2.54]
.100 ± .003 Typ
[2.54]
Recommended Mounting Hole Pattern
Inch
[mm]
Tolerance Unless Noted
Notes:
.0
.00
.000
1.“C” = .100" X pin quantity per row.
2.The recommended PCB hole size for the kinked tail positions on the .120" solder tail connector is Ø .040" .002.
Inch
±.1
±.01 ±.005
[ ] Dimensions for Reference Only
The kinked tail positions are the first and last position in each row.
Ordering Information
23XX - 6XXX - XX
Plating
Pin Quantity
One Row (02-40)
Two Row (04-80)
TB = 30 µ" Gold (App. E3 & C2 Apply)
TG = 10 µ" Gold (App. E3 & C2 Apply)
TP = Tin-lead (App. E3 & C2 Apply)
Pin Length
(Dim A)
Tail
1 = .230"
2 = .318"
One Row
11 = .120" Solder Tails
Two Row
21 = .120" Solder Tails
TS-0766-B
Sheet 2 of 3
51 = .120" Kinked Solder Tails 81 = .120" Kinked Solder Tails
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M™ Pin Strip Header
.100" and .100" × .100" Straight and RightAngle, Solder Tail
2300 Series
Right Angle
C
.015
.100
[2.54]
(See Note 1)
.120
[3.05]
.100
[2.54]
.050
[1.27]
.100
[2.54]
.050
[1.27]
.071
[1.80]
.025 Sq
[0.64]
A
.010
A
.010
.06
[1.5]
.100
[2.54]
.06
[1.5]
.242
[6.14]
D
.015
(See Note 1)
Ø .040 .003
[1.02]
(See Note 2)
Ø .040 .003
[1.02]
(See Note 2)
.100 .003 Typ
[2.54]
C
.100 .003 Typ
[2.54]
.100 .003 Typ
[2.54]
mm
[Inch]
Recommended Mounting Hole Pattern
Tolerance Unless Noted
.0
.00
.000
Notes:
1.“C” = .100" X pin quantity per row.
mm
±.1
±.01 ±.005
2.The recommended PCB hole size for the kinked tail positions on the .120" solder tail connector is Ø .040" .002.
[ ] Dimensions for Reference Only
3. Drawing not to scale. Part details may vary.
Ordering Information
23XX - 5XXX - XX
Plating
Pin Quantity
One Row (02-40)
Two Row (04-80)
TB = 30 µ" Gold (App. E3 & C2 Apply)
TG = 10 µ" Gold (App. E3 & C2 Apply)
TP = Tin-lead (App. E3 & C2 Apply)
Pin Length
(Dim A)
Tail
1 = .230"
2 = .318"
One Row
11 = .120" Solder Tails
Two Row
21 = .110" Solder Tails
TS-0766-B
Sheet 3 of 3
51 = .120" Kinked Solder Tails 81 = .110" Kinked Solder Tails
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC, as amended by EU Commission Decision 2005/717/EC, as amended by
EU Court of Justice Decision 2008/C 116/04
This product contains decaBDE in the insulating material in excess of the maximum concentration allowed for finished
products subject to EU RoHS that are placed on the EU market after June 30, 2008.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217B-E
Appendix E5: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under
Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the
product or part does not contain any of the following substances in excess of the following maximum concentration values in any
homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated
diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or
polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
RIA-2217B-E
Appendix C3: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or
polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3m.com/interconnects
Please recycle. Printed in USA.
© 3M 2008. All rights reserved.
RIA-2217B-E
3M is a trademark of 3M Company.
2328-6221-TG 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
2328-6251-TB | 3M | Board Connector, 28 Contact(s), 1 Row(s), Male, Straight, Solder Terminal | 获取价格 | |
2328-6251-TP | 3M | 28 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER | 获取价格 | |
2328-6281-TG | 3M | Board Connector, 28 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Black Insulator, Receptacle | 获取价格 | |
2328-6281-TP | 3M | 28 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER | 获取价格 | |
2328-6281TN | 3M | HEADER CONNECTOR,PCB MNT,RECEPT,28 CONTACTS,PIN,0.1 PITCH,R ANGLE PC TAIL TERMINAL,BLACK | 获取价格 | |
23280-31PG-350 | SWITCH | Circular Connector, 31 Contact(s), Polyamide, Male, Crimp Terminal, | 获取价格 | |
23280-31PG-T350 | SWITCH | Circular Connector, 31 Contact(s), Polyamide, Male, Crimp Terminal, | 获取价格 | |
23280-31SG-350 | SWITCH | Circular Connector, 31 Contact(s), Polyamide, Female, Crimp Terminal, | 获取价格 | |
23280-31SG-T350 | SWITCH | Circular Connector, 31 Contact(s), Polyamide, Female, Crimp Terminal, | 获取价格 | |
23283 | VICOR | APPS DWG, VI-900 MODULE EXCHANGE TOOL | 获取价格 |
2328-6221-TG 相关文章
- 2024-10-31
- 6
- 2024-10-31
- 6
- 2024-10-31
- 7
- 2024-10-31
- 8