3428-6602UB [3M]
20 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER;型号: | 3428-6602UB |
厂家: | 3M ELECTRONICS |
描述: | 20 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER |
文件: | 总5页 (文件大小:1057K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3M™ Four-Wall Header
.100” × .100” Latch/Ejector, Straight and RightAngle
3000 Series
• Military (with 3M’s 3518 & N3518 polarizing key) and
centerbump polarization
• Optional ejector latches
• Mounting holes for securing header to board
• Optional polarizing posts available
• High temperature insulator option suitable for “no lead”
soldering operations
• High temperature option suitable for reflow soldering
using “paste in hole” techniques
• Solder tail option
• See the Regulatory InformationAppendix (RIA) in the
“RoHS compliance” section of www.3Mconnector.com
for compliance information (RIAE1 & C1 apply)
Date Modified: July 5, 2010
TS-0772-K
Sheet 1 of 4
Physical
Insulator:
Material: Glass Filled Polyester (PBT) Glass Filled Polyester (PCT) - (High Temp Option)
Flammability: UL 94V-0
Color: Gray (PBT), Black (PCT)
Contact:
Material: CopperAlloy
Plating:
Underplating:
Nickel - Overall (See Ordering Information)
WipingArea: 30 µ” [ 0.76 μm ] Gold
Solder Tails: Tin Lead or Matte Tin (See Ordering Information)
3M Logo, Part Identification Number and Orientation Triangle
Marking:
Electrical
2A(EIA364-70)
Current Rating:
Insulation Resistance:
Withstanding Voltage:
>1 × 109 Ω at 500 VDC
1,000 VRMS at Sea Level
Environmental
-55°C to +105°C
Temperature Rating:
260°C - (High Temp PCT insulator verson), single pass, (profile per J-STD-020C)
(PBT insulator version), maximum insulator temperature 191°C (solder wave
processonly)
Process Rating:
1 (per J-STD-020C) High Temp. (PCT) versions only
Moisture Sensitivity Level:
UL File No.: E68080
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M™ Four-Wall Header
.100” × .100” Latch/Ejector, Straight and RightAngle
3000 Series
-X0XX
-X3XX
-X2XX
Header without Latch Ejector
Header with
Header with
Long Ejector/Latch
for 3M Sockets with
Strain Relief
Short Ejector/Latch
for 3M Sockets without
Strain Relief
.08
[2.0]
.08
[2.0]
.573 .010
[ 14.55 ]
.424 .010
[ 10.77 ]
1.07 Ref
[27.2]
.97 Ref
[24.6]
A
.025 .002 Sq Typ
[ 0.64 ]
.37 Ref
[9.4]
.46 Ref
[11.7]
D
.24
[6.1]
.28
7.1
.100
2.54
REF.
.020
0.51
.30
[7.6]
.34
8.6
.25
6.4
.13
3.3
.100
2.54
REF.
2X O .100 [2.54]
Dim. E
C
L
SEE NOTE #2
POSITION #1
B
“Y”
F Typ
Section A-A
(Straight)
Notch A
(See Table 1 & Note1)
Position 1
Orientation
Triangle
Notch B
(See Table 1)
.025 .002 Sq Typ
[ 0.64 ]
Notch C
(See Table 1 & Note 1)
.16
[4.1]
.21
[5.3]
A
B
.24
[6.1]
F Typ
.68
[17.3]
.12
[3.0]
.35
[8.9]
.30
[7.6]
C
“Y”
L
.020
[0.51]
.197
[5.00]
Dim. E
B
A
.049 Ref
[1.24]
.20
[5.1]
C
A
2X ø .100
[2.54]
(See Note 2)
.100 Ref
[2.54]
Section B-B
(Right Angle)
TS-0772-K
Sheet 2 of 4
C
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3Mconnector.com
3M™ Four-Wall Header
.100” × .100” Latch/Ejector, Straight and RightAngle
3000 Series
Table 1
Inch
(mm)
Dimensions
3M Part
Pin Qty
Polarizing
Notches
Tolerance Unless Noted
Number
A
B
C
D
.00
.01
.000
.005
.0
.1
10
14
16
20
24
26
30
34
40
50
60
64
3793
3314
3408
3428
3627
3429
3440
3431
3432
3433
3372
3764
1.265 (32.13)
1.465 (37.21)
1.565 (39.75)
1.765 (44.83)
1.965 (49.91)
2.065 (52.45)
2.265 (57.53)
2.465 (62.61)
2.765 (70.23)
3.265 (82.93)
3.765 (95.63)
3.965 (100.71)
1.104 (28.04)
1.304 (33.12)
1.404 (35.66)
1.604 (40.74)
1.804 (45.82)
1.904 (48.36)
2.104 (53.44)
2.304 (58.52)
2.604 (66.14)
3.104 (78.84)
3.604 (91.54)
3.804 (96.62)
0.865 (21.97)
1.065 (27.05)
1.165 (29.59)
1.365 (34.67)
1.565 (39.75)
1.665 (42.29)
1.865 (47.37)
2.065 (52.45)
2.365 (60.07)
2.865 (72.77)
3.365 (85.47)
3.565 (90.55)
0.705 (17.91)
0.905 (22.99)
1.005 (25.53)
1.205 (30.61)
1.405 (35.69)
1.505 (38.23)
1.705 (43.31)
1.905 (48.39)
2.205 (56.01)
2.705 (68.71)
3.205 (81.41)
3.405 (86.49)
BC
Inch
BC
[ ] Dimensions for
Reference only
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
Table 2
3M Part
Number Suffix
Contact Tail
Dim E
Pin Cross Section
Dim G
-5XX2
Solder Tail for
.062 (1.57)
Thick PC Board
Dim F
.0245 .0005
(0.622)
Diagonals
.028 .001
(0.71)
Corner Radii
.0075 Ref
(0.191)
.112 .010
(2.84)
0.035 .003
(0.89) (See Note 3)
-6XX2
-5X03
Solder Tail for 0.94
(2.39) to .125 (3.18)
Thick PC Board
.155 .010
(3.94)
.0245 .0005
(0.622)
.028 .001
(0.71)
.0075 Ref
(0.191)
0.035 .003 (0.89)
-6X03
or ø.116
[2.95]
ø.106
[2.69]
or
ø.106
[2.69]
ø.116
[2.95]
.41
[10.4]
(See Note 2)
(See Note 2)
.300
[7.62]
Side to Side Stackability
Max to Edge of PCB
for Daisy Chain
Dim G
Dim G
"Y"
C
L
C
L
“Y”
Position 1
.029
Position 1
[0.74]
.060
[1.52]
.100 .003
[2.54]
.100 .003
[2.54]
.100 .003
[2.54]
.232
[5.89]
.352
[8.94]
.100 .003
[2.54]
C
B
Recommended Mounting Hole Pattern
Recommended Mounting Hole Pattern
(Right Angle)
(Straight)
Notes: 1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #3518 or #N3518).
2. Mounting hardware: From solder side of pc board use #4-24 thread cutting screw (3M Part # 3341-5) and .116 [2.95] dia mounting hole. For right angle version only, #2-56 bolt and nut (3M
Part # 3341-6) with .106 [2.69] dia mounting hole may be used.
3.The recommended PCB hole size for the kinked tail positions on the .112 solder tail connector is .035 .002. See page 4 for kink position details (K2 version).
4. Contact your 3M sales representative for custom requirements.
X3XXX-XXXXXX
Plating
Ordering Information
RB = 30 μ”[ 0.76 μm ] Gold and 200 μ”[ 5.08 μm ] MatteTin
over 100 μ” [ 2.54 μm ] Nickel (App. E1 & C1 Apply)
Blank or UB = 30 μ” (0.76 μm ] Gold and 200 μ” [ 5.08 μm ]
N = HighTemp Black (PCT)/(RB Plating Req’d)
Blank = Std.Temp Gray (PBT) /(Blank or UB Pltg. Req’d.)
Tin Lead over 100 μ” [ 2.54 μm ] Nickel (App. E3 & C2 Apply)
3M Part Number
(See Table 1)
Latch/Ejector System
Tail
0 = No Latch/Ejector installed
2 = Short Roll Pin Latch/Ejectors
3 = Long Roll Pin Latch/Ejectors
5 = Short, Snap-In Latch/Ejectors
6 = Long, Snap-In Latch/Ejectors
02 = for .062 [1.57] thick board
03 = for .094 to .125 [2.39 to 3.18] thick board
K2 = kinked for .062 [1.57] thick board
Pin Configuration
5 = Right Angle Solder Tails
6 = Straight SolderTails
TS-0772-K
Sheet 3 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M™ Four-Wall Header
.100” × .100” Latch/Ejector, Straight and RightAngle
3000 Series
Part Customization
Polarizing Post
This spec sheet details our standard offering.
3M has several capabilities that can provide a part tailored
to your specific needs. Ask your 3M sales representative
or customer service for more details.
.318
[8.08]
3201-4
3201-5
LCP
PBT
Black
Gray
.100 Dia
[2.54]
Note: Insert Post into one mounting hardware hole on bottom of header. Set
post to protrude .115” [2.92].
Both snap in and roll pin latches may be ordered sepa-
rately. Snap in and roll style latches are dimensionally and
functionally equivalent. If ordering snap-in or roll pin style
latches separately, please use the below chart.
2500 & 3000 Series Shrouded Header
Total Number
of Pins
Number of
Positions Kinked
Tails Kinked
Short
Latch
Long
Latch
Latch
Style
Color
Gray
10
14
16
20
24
26
30
34
36
40
50
60
64
4
4
4
4
4
4
4
4
4
4
4
4
4
3
3
4
4
7
8
Standard Temperature
(PBT)
3505-2
3505-3
Roll Pin
Roll Pin
Snap-In
11
13
17
21
23
25
27
27
33
43
49
53
12
14
18
22
24
26
28
28
34
44
50
54
3
4
High Temperature
(PCT)
N3505-2B
N3505-3B
Black
3
4
HighTemperature (PBT) 3505-30
3505-31
Gray
3
4
High Temperature (PPA) N3505-30B N3505-31B Snap-In
Black
3
4
5
6
• Selective pin removal (ATAor other compatability)
• Wire wrap tails styles
7
8
7
8
7
8
7
8
11
11
12
12
Kinked Tail Detail:
Kink is located .05” below bottom surface of plastic.
External radius of kink toward part centerline.
Mounting Hardware
Polarizing Keys
3341-6
(Must be inserted prior to latch on
3341-5
Dim A
.02
vertical headers)
(Installed from bottom of board)
N3518
3518
LCP
PBT
Black
Gray
.02
.50
[12.7]
.31
[7.9]
.09
[2.3]
Panhead Thread Cutting Screw:
#4-24 X 5/16”
Type: USA Std BT, Federal BG
Hex Head Bolt, Nut and Washer
Bolt - #2-56 X 1/2”
Breakaway Tab
.34 Ref
[8.6]
A
.15
[3.8]
3341-5 & 6
Material - Stainless Steel
Note: #2216 B/A Scotchweld can be used to adhere keys.
TS-0772-K
Sheet 4 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnector.com
Please recycle. Printed in USA.
© 3M 2010. All rights reserved.
RIA-2217B-E
3M is a trademark of 3M Company.
©2020 ICPDF网 联系我们和版权申明