3429-1303 [3M]
20 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER;
| 型号： | 3429-1303 |
| 厂家： | 
3M ELECTRONICS |
| 描述： | 20 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER PC 连接器 |
| 文件： | 总6页 (文件大小：637K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
3M™ Three-Wall Header
.100” × .100” Latch/Ejector, Straight and RightAngle
3000 Series
•ꢀ Military (with 3M’s 3518 or N3518 polarizing key) and center
bump polarization
•ꢀ Low profile
•ꢀ Optional ejector latches
•ꢀ Mounting holes for securing header to board
•ꢀ Three wall shroud provides design flexibility
•ꢀ Solder tail and wrap tail options
•ꢀ Optional polarizing posts available
•ꢀ Optional high temperature insulator suitable for “no lead”
soldering operations
•ꢀ High temperature option is suitable for reflow soldering using
“paste in hole” techniques
•ꢀ See the Regulatory InformationAppendix (RIA) in the “RoHS
compliance” section of www.3Mconnectors.com for compliance
information
Date Modified: May 21, 2012
TS-0771-F
Sheet 1 of 5
Physical
Insulator:
Material: Glass Filled Polyester (PBT)
Glass Filled Polyester (PCT) - High Temp Option
Flammability: UL 94V-0
Color: Gray (PBT), Black (PCT)
Contact:
Material: CopperAlloy
Plating:
Underplating:
100 μ” [ 2.54 μm ] Nickel - Overall
WipingArea: 30 μ” [ 0.76 μm ] Gold
Solder Tails: 200 μ” [ 5.08 μm ] Tin Lead or Matte Tin (See Ordering Information)
3M Logo, Part Identification Number and Orientation Triangle
Marking:
Electrical
5.00A, 1 Contact Powered
3.00A, 6 Contacts Powered
1.75A, All Contacts Powered
Current Rating:
Rating Conditions: EIA-364-070 Method 2, 30°C maximum temperature rise, 20%
derated. Reference appropriate 3M Product Specification for detailed current
derating curves.
>1 × 109 Ω at 500VDC
1000VRMS at Sea Level
Insulation Resistance:
Withstanding Voltage:
Environmental
-55°C to +105°C
Temperature Rating:
High Temp PCT insulator version: 260°C, per J-STD-020C, single pass
PBT insulator version: 191°C, maximum insulator temperature, solder wave
process only
Process Rating:
1 (per J-STD-020C) High Temp. (PCT) versions only
Moisture Sensitivity Level:
UL File No.: E68080
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M™ Three-Wall Header
.100” × .100” Latch/Ejector, Straight and RightAngle
3000 Series
-X2XX
-X0XX
Header without Latchs
-X3XX
Header with
Header with
Short Ejector/Latch
for 3M Sockets without
Strain Relief
Long Ejector/Latch
for 3M Sockets with
Strain Relief
.08
[2.0]
.08
[2.0]
.573 .010
[ 14.55 ]
.424 .010
[ 10.77 ]
1.07 Ref
[27.2]
.97 Ref
[24.6]
A
.46 Ref
[11.7]
.37 Ref
[9.4]
.025 .002 Sq Typ
[ 0.64 ]
.24
[6.1]
D
.020
0.51
.100
2.54
.28
7.1
REF.
.15
3.8
.30
[7.6]
.25
6.4
.31
7.9
.13
3.3
E
.010
C
L
.100
2.54
REF.
2X O .100 [2.54]
SEE NOTE #2
“Y”
POSITION #1
B
F Typ
Section A-A
Notch A
(See Table 1 & Note1)
(Straight)
Position 1
Orientation
Triangle
Notch B
(See Table 1)
Notch C
.16
.025 .002 Sq
Typ
[ 0.64 ]
.21
[5.3]
(See Table 1 & Note 1)
[4.1]
A
B
F Typ
.100 Ref
[2.54]
.24
[6.1]
.68
[17.3]
.12
[3.0]
.30
[7.6]
.35
[8.9]
C
L
“Y”
.020
[0.51]
E
.010
.197
[5.00]
.049
Ref
B
A
.20
[5.1]
C
A
2X Ø .100
[2.54]
(See Note 2)
Section B-B
(Right Angle)
TS-0771-F
Sheet 2 of 5
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3Mconnectors.com
3M™ Three-Wall Header
.100” × .100” Latch/Ejector, Straight and RightAngle
3000 Series
Table 1
Dimensions
3M Part
Number
Polarizing
Notches
Pin Qty
A
B
C
D
10
14
16
20
26
34
40
50
60
64
3793
3314
3408
3428
3429
3431
3432
3433
3372
3764
1.26 (32.1)
1.46 (37.2)
1.56 (39.7)
1.76 (44.8)
2.06 (52.4)
2.46 (62.6)
2.76 (70.2)
3.26 (82.9)
3.76 (95.6)
3.96 (100.7)
1.105 (28.07)
1.305 (33.15)
1.405 (35.69)
1.605 (40.77)
1.905 (48.39)
2.305 (58.55)
2.605 (66.17)
3.105 (78.87)
3.605 (91.57)
3.805 (96.65)
0.865 (21.97)
1.065 (27.05)
1.165 (29.59)
1.365 (34.67)
1.665 (42.29)
2.065 (52.45)
2.365 (60.07)
2.865 (72.77)
3.365 (85.47)
3.565 (90.55)
0.71 (18.0)
0.91 (23.1)
1.01 (25.6)
1.21 (30.7)
1.51 (38.3)
1.91 (48.5)
2.21 (56.1)
2.71 (68.8)
3.21 (81.5)
3.41 (86.6)
BC
BC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
Table 2
Pin Cross Section
Diagonals
3M Part
Number Suffix
Contact Tail
Dimension E
Dimension G
Dimension F
Corner Radii
Solder Tail for
.062 (1.57)
Thick PC Board
-1XX2
-2XX2
.112
(2.84)
.0245 .0005
(0.622)
.028 .001
(0.71)
.0075 Ref
(0.191)
0.035 .003
(0.89) (See Note 3)
Solder Tail for
0.94 (2.39) to .125
(3.18) Thick PC
Board
-1X03
-2X03
.155
(3.94)
.0245 .0005
(0.622)
.028 .001
(0.71)
.0075 Ref
(0.191)
0.035 .003 (0.89)
Ø.106 or
[2.69]
Ø.116
[2.95]
or
Ø.106
[2.69]
Ø.116
[2.95]
.41
(See Note 2)
[10.4]
(See Note 2)
Max to Edge of PCB
for Daisy Chain
.300
[7.62]
G Dim
Side to Side Stackability
G Dim
C
“Y”
L
“Y”
C
L
Position 1
.029
[0.74]
Position 1
.100 .003
[2.54]
.060
[1.52]
.100 .003
[2.54]
.100 .003
[2.54]
.232
[5.89]
.352
[8.94]
C
.100 .003
[2.54]
B
Recommended Mounting Hole Pattern
Recommended Mounting Hole Pattern
(Right Angle)
(Straight)
Inch
(mm)
Tolerance Unless Noted
.00
.000
.0
± .005
± .01
Inch
± .1
Notes:
[ ] Dimensions for
Reference only
1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #3518 or N3518).
2. Accepts Rear and Front mounting hardware:
Rear Entry: #4-24 thread cutting screw, 3M Part #3341-5, .116 [2.95] dia mounting hole
Front Entry: (Prior to installation of latch on Straight Versions) #2-56 bolt and nut, 3M Part #3341-6,
.106 [2.69] dia mounting hole. See illustrations on page 5.
3. The recommended PCB hole size for the kinked tail positions on the .112 solder tail connector is .035 .002.
Kink is located .05” below bottom surface of plastic. External radius of kink toward part centerline
TS-0771-F
Sheet 3 of 5
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3Mconnectors.com
3M™ Three-Wall Header
.100” × .100” Latch/Ejector, Straight and RightAngle
3000 Series
Ordering Information
X3XXX - XXXX XX
N = High Temp Black (PCT)/(RB Plating Req’d)
RB = 30 μ” Gold with Matte Tin Tails (App. E1 & C1 Apply)
Blank or UB = 30 μ” Gold with Sn/Pb Tails (App. E3 & C2Apply)
Blank = Std. Temp Gray (PBT) /(Blank or UB Pltg. Req’d.)
3M Part Number
(See Table 1)
Tail
02 = Solder Tail for .062 [1.57] Thick Board
K2= Kinked Solder Tails for .062 [1.57] Thick Board
03 = Solder Tails for .094 to .125 [2.39 to 3.18] Thick Board
Shroud and Pin Configuration
1 = 3 Wall, Right Angle Solder Tail
2 = 3 Wall, Straight Solder Tail
Latch/Ejector System
0 = No Latch/Ejector
2 = Short Roll PinLatch/Ejectors
3 = Long Roll Pin Latch/Ejectors
Part Customization
This spec sheet details our standard offering.
3M has several capabilities that can provide a part tailored to
your specific needs. Ask your 3M sales representative or
customer service for more details.
Kinked Tail (K2 option) positions:
2500 & 3000 Series Shrouded Header
Total Num-
Use of snap-in style latch/ejectors in either short (N3XXX
X5XX) or long (N3XXX-X6XX) styles, installed or shipped
separately (the -5 & -6 snap-in latches are dimensional and
functional equivalents to the -2 & -3 roll pin latches) which
are also available separately with roll pins included. Refer to
chart below.
Number of
Positions
Kinked
ber
Tails Kinked
of Pins
10
14
16
20
24
26
30
34
36
40
50
60
64
4
4
4
4
4
4
4
4
4
4
4
4
4
3
3
3
3
3
3
5
7
7
7
7
4
4
4
4
4
4
6
8
8
8
8
7
8
11 12
13 14
17 18
21 22
23 24
25 26
27 28
27 28
33 34
43 44
If ordering snap-in or roll pin style latches separately, please use the below chart
Short
Latch
Long
Latch
Style
Color
Gray
Black
Gray
Black
Latch
Standard Temperature
(PBT)
3505-2
3505-3
Roll Pin
Roll Pin
Snap-In
Snap-In
High Temperature
(PCT)
N3505-2B
3505-30
N3505-3B
3505-31
High Temperature
(PBT)
11 12 49 50
11 12 53 54
High Temperature
(PPA)
N3505-30B N3505-
31B
•ꢀ Selective pin removal (ATA or other compatability)
•ꢀ Wire wrap tails styles
Kinked Tail Detail:
Kink is located .05” below bottom surface of plastic.
External radius of kink toward part centerline.
TS-0771-F
Sheet 4 of 5
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M™ Three-Wall Header
.100” × .100” Latch/Ejector, Straight and RightAngle
3000 Series
Polarizing Post
3201-3
3201-4
P B T
LC P
G ray
B lac k
.321
[8.15]
.100 Dia
[2.54]
Note: Insert Post into one mounting hardware hole on
bottom of header. Set post to protrude .115” [2.92]
Polarizing Keys
Dim A
.02
.02
N3518
3518
LCP
PBT
Black
Gray
.09
[2.3]
Breakaway Tab
.34 Ref
[8.6]
A
.15
[3.8]
Note: #2216 B/A Scotchweld can be used to adhere keys.
Mounting Hardware
3341-6
(Must be inserted prior to latch on
vertical headers)
3341-5
(Installed from bottom of board)
.50
[12.7]
.31
[7.9]
Hex Head Bolt, Nut and Wash
Bolt - #2-56 X 1/2”
Panhead Thread Cutting Screw:
#4-24 X 5/16”
Type: USA Std BT, Federal BG
3341-5 & 6
Material - Stainless Steel
TS-0771-F
Sheet 5 of 5
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnectors.com
Please recycle. Printed in USA.
© 3M 2012. All rights reserved.
RIA-2217B-E
3M is a trademark of 3M Company.
相关型号：
3429-1502UG
Board Connector, 26 Contact(s), 2 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Gray Insulator, Receptacle,
3M
3429-22K2UB
Board Connector, 26 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Black Insulator,
3M
©2020 ICPDF网 联系我们和版权申明