37306-2165-0W0FL [3M]
6 CONTACT(S), FEMALE, TWO PART BOARD CONNECTOR, IDC, SOCKET, ROHS COMPLIANT;
| 型号： | 37306-2165-0W0FL |
| 厂家： | 
3M ELECTRONICS |
| 描述： | 6 CONTACT(S), FEMALE, TWO PART BOARD CONNECTOR, IDC, SOCKET, ROHS COMPLIANT 连接器 |
| 文件： | 总9页 (文件大小：1709K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
3M™ Mini-Clamp Socket
Designed for Wiring Supplied from Japan andAsia, 2 mm, IDC, Wiremount, Panel Mount
373 Series
•ꢀ Designed to accommodate typical wiring specifications per
Japanese andAsian suppliers
•ꢀ Latches available for Panel Mount applications
•ꢀ No special wire preparation
•ꢀ Integrated cable retention
•ꢀ Design accepts multiple wire size diameters
•ꢀ Easy, quick, and reliable IDC termination using a standard pliers
•ꢀ Debris free wire termination
•ꢀ Accepts plug latches for a reliable interconnection in demanding
applications
•ꢀ High number of mating cycles
•ꢀ Compact design saves board and panel space
•ꢀ Reduces maintenance work by providing higher connection
reliability
•ꢀ See Regulatory InformationAppendix (RIA) for chemical
compliance information
Date Modified: April 2, 2008
TS-2094-C
Sheet 1 of 6
Physical
Insulation:
Material: Glass reinforced thermoplastic body and lower cover, transparent thermoplastic cover
Flammability: UL 94V-0
Color: Black body, cover—white and color (see Table 1)
CopperAlloy
Contact Material:
Plating:
Underplating:
2.54 µm [100 µ”] minimum Nickel
WipingArea: 0.2 µm [8 µ”] minimum Gold with Lubricant
IDC: Nickel
Accommodation: Annealed Copper, high-strength Copper or CopperAlloy. Bare, tinned, or tin
overcoated, 20 ~ 26AWG [ 0.14 ~ 0.5 ] stranded
Wire Insulation: Flexible vinyl, semi-rigid vinyl, x-linked polyethylene, or ETFE (see Table 1)
3M Logo, Position Indicator, Wire Gauge, Insulator Material
Marking:
Electrical
3.0Amps
Current Rating:
Voltage Rating:
32Volts
>1 x 106 Ω at 600VDC
1,000VRMS at sea level
Insulation Resistance:
Withstanding Voltage:
Environmental
20°C to +85°C ambient (1.0A max.)
-20°C to +75°C ambient (2.0A max.)
-20°C to +60°C ambient (3.0A max.)
(Note: UL rating is 65°C at 3.0A, 32V)
Temperature Rating:
UL File No.: E68080
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3M.com/interconnects/
3M™ Mini-Clamp Socket
Designed for Wiring Supplied from Japan andAsia, 2 mm, IDC, Wiremount, Panel Mount
373 Series
3 or 4 Position
No Latch
mm
[Inch]
Tolerance Unless Noted
0.00
±.10
0.0
±.1
mm
[ ] Dimensions for
Reference only
15.6
[.61]
Dim
A
# Postions
Dim A
Before
3
13.8 [.54]
15.8 [.62]
Termination
8.2
4
[.32]
AfterTermination
Table 1
6.4
[.25]
1.6 ~ 2.0
1.2 ~ 1.6
1.0 ~ 1.62
0.8 ~ 1.0
Wire Insulation
OD
[.063 ~ .079] [.047 ~ .063] [.039 ~ .064] [.031 ~ .039]
Part #
20-22 AWG
2206
Gray
2165
Blue
2124
Green
3122
Cover Color
Part #
24-26 AWG
3163
3101
C
Orange
Yellow
Red
Cover Color
Ordering Information
(RIA E1 & C1 apply)
373XX - XXXX - 000 FL
Wire AWG & OD:
Positions
2XXX = 20-22 AWG
3XXX = 24-26 AWG
OD - (see Table 1)
03 or 04
TS-2094-C
Sheet 2 of 6
Note: Terminate using common pliers or 3M™ Sctochlok™ Crimping Tools E-9BM or E-9E
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3M.com/interconnects/
3M™ Mini-Clamp Socket
Designed for Wiring Supplied from Japan andAsia, 2 mm, IDC, Wiremount, Panel Mount
373 Series
3 or 4 Position
with Latch for Panel Mount
mm
[Inch]
Tolerance Unless Noted
0.00
±.10
0.0
±.1
mm
[ ] Dimensions for
Reference only
Dim
A
# Postions
[Dim A]
23.4 [.92]
25.4 [1.0]
3
4
Table 1
1.6 ~ 2.0
1.2 ~ 1.6
1.0 ~ 1.62
0.8 ~ 1.0
Wire Insulation
OD
[.063 ~ .079] [.047 ~ .063] [.039 ~ .064] [.031 ~ .039]
Part #
20-22 AWG
2206
Gray
2165
Blue
2124
Green
3122
Cover Color
Part #
24-26 AWG
3163
3101
Note: See page 4 for panel cutout.
Orange
Yellow
Red
Cover Color
C
Ordering Information
(RIA E1 & C1 apply)
373XX - XXXX - 0P0 FL
Wire AWG & OD:
Positions
2XXX = 20-22 AWG
3XXX = 24-26 AWG
OD - (see Table 1)
03 or 04
TS-2094-C
Sheet 3 of 6
Note: Terminate using common pliers or 3M™ Sctochlok™ Crimping Tools E-9BM or E-9E
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3M.com/interconnects/
3M™ Mini-Clamp Socket
Designed for Wiring Supplied from Japan andAsia, 2 mm, IDC, Wiremount, Panel Mount
373 Series
6 or 8 Position
No Latch
mm
[Inch]
Tolerance Unless Noted
0.00
±.10
0.0
±.1
mm
[ ] Dimensions for
Reference only
B
A
# Postions
6 (3x2)
Dim A
Dim B
13.8 [.54]
15.8 [.62]
11.5 [.45]
13.5 [.53]
8 (4x2)
Table 1
1.6 ~ 2.0
1.2 ~ 1.6
1.0 ~ 1.62
0.8 ~ 1.0
Wire Insulation
OD
[.063 ~ .079] [.047 ~ .063] [.039 ~ .064] [.031 ~ .039]
Part #
20-22 AWG
2206
Gray
2165
Blue
2124
Green
3122
Cover Color
Part #
24-26 AWG
3163
3101
Orange
Yellow
Red
Cover Color
C
Ordering Information
(RIA E1 & C1 apply)
373XX - XXXX - 0W0 FL
Wire AWG & OD:
Positions
2XXX = 20-22 AWG
3XXX = 24-26 AWG
OD - (see Table 1)
06 or 08
TS-2094-C
Sheet 4 of 6
Note: Terminate using common pliers or 3M™ Sctochlok™ Crimping Tools E-9BM or E-9E
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3M.com/interconnects/
3M™ Mini-Clamp Socket
Designed for Wiring Supplied from Japan andAsia, 2 mm, IDC, Wiremount, Panel Mount
373 Series
6 or 8 Position
with Latch for Panel Mount
mm
[Inch]
Tolerance Unless Noted
0.00
±.10
0.0
±.1
mm
[ ] Dimensions for
Reference only
C
B
A
# Postions
6 (3x2)
Dim A
Dim B
Dim C
13.8 [.54]
15.8 [.62]
11.5 [.45]
13.5 [.53]
23.4 Ref.
25.4 Ref.
8 (4x2)
Table 1
1.6 ~ 2.0
1.2 ~ 1.6
1.0 ~ 1.62
0.8 ~ 1.0
Wire Insulation
OD
[.063 ~ .079] [.047 ~ .063] [.039 ~ .064] [.031 ~ .039]
Part #
20-22 AWG
2206
Gray
2165
Blue
2124
Green
3122
Cover Color
Part #
24-26 AWG
3163
3101
Note: See page 4 for panel cutout.
Orange
Yellow
Red
Cover Color
C
Ordering Information
(RIA E1 & C1 apply)
373XX - XXXX - 0M0 FL
Wire AWG & OD:
Positions
2XXX = 20-22 AWG
3XXX = 24-26 AWG
OD - (see Table 1)
06 or 08
TS-2094-C
Sheet 5 of 6
Note: Terminate using common pliers or 3M™ Sctochlok™ Crimping Tools E-9BM or E-9E
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3M.com/interconnects/
3M™ Mini-Clamp Socket
Designed for Wiring Supplied from Japan andAsia, 2 mm, IDC, Wiremount, Panel Mount
373 Series
Panel Cutouts
Multiple
Mounting
Single
Mounting
A
B
3 and 4 Pin
37303-XXXX-0P0 FL
37304-XXXX-0P0 FL
Multiple
Mounting
Single
Mounting
A
B
6 and 8 Pin
37306-XXXX-0M0 FL
37308-XXXX-0M0 FL
Table 2:
Panel Thickness in mm
1.0 to 1.2mm
A
1.4 to 1.6mm
Pins
03
A
B
20.0[0.79]
22.0[0.87]
20.0[0.79]
22.0[0.87]
20.4[0.80]
22.4[0.88]
20.4[0.80]
22.4[0.88]
14.2[0.56]
16.2[0.64]
14.2[0.56]
16.2[0.64]
04
06
08
TS-2094-C
Sheet 6 of 6
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/717/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217B-D
Appendix E5: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under
Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means
that the product or part does not contain any of the following substances in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
RIA-2217B-D
Appendix C3: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3M Electronic Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3m.com/interconnects
Please recycle. Printed in USA.
© 3M 2008. All rights reserved.
RIA-2217B-D
3M is a trademark of 3M Company.
相关型号：
37306-2206-0M0FL
Board Connector, 6 Contact(s), 2 Row(s), Female, 0.079 inch Pitch, IDC Terminal, Locking, Black Insulator, Socket, ROHS COMPLIANT
3M
37306300000
Electric Fuse, Fast Blow, 0.63A, 250VAC, 50A (IR), Through Hole, TE5, HALOGEN FREE AND ROHS COMPLIANT
LITTELFUSE
37306300410
Electric Fuse, Fast Blow, 0.63A, 250VAC, 50A (IR), Through Hole, TE5, HALOGEN FREE AND ROHS COMPLIANT
LITTELFUSE
37306300430
Electric Fuse, Fast Blow, 0.63A, 250VAC, 50A (IR), Through Hole, TE5, HALOGEN FREE AND ROHS COMPLIANT
LITTELFUSE
37308-2206-0M0FL
Board Connector, 8 Contact(s), 2 Row(s), Female, 0.079 inch Pitch, IDC Terminal, Locking, Black Insulator, Socket, ROHS COMPLIANT
3M
©2020 ICPDF网 联系我们和版权申明