3764-L202RB [3M]
Board Connector, 128 Contact(s), 4 Row(s), Male, Right Angle, Solder Terminal, ROHS COMPLIANT;
| 型号： | 3764-L202RB |
| 厂家： | 
3M ELECTRONICS |
| 描述： | Board Connector, 128 Contact(s), 4 Row(s), Male, Right Angle, Solder Terminal, ROHS COMPLIANT 连接器 |
| 文件： | 总4页 (文件大小：854K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
3M™ Four-Wall Condo Header
.100” × .100” RightAngle
3000 Series
• Stacked pins conserve space on the circuit board
allowing higher density packaging
• Pin quantity to 128 gives design flexibility with
latching
• ‘’HDI’’alternative
• Accepts standard IDC sockets
• Mates with standard flat cable harnesses
• Optional high temperature insulator suitable for ‘’no
lead’’soldering operations
• High temperature option suitable for reflow soldering
using “paste in hole” techniques
• See the Regulatory InformationAppendix (RIA) in the
“RoHS compliance” section of www.3Mconnector.
com for compliance information (RIAE1 & C1 apply)
Date Modified: July 5, 2010
TS-0774-E
Sheet 1 of 3
Physical
Insulation:
Material: Glass Filled Polyester (PBT), Glass Filled Polyester (PCT) - High Temp Option
Flammability: UL 94V-0
Color: Gray (PBT), Black (PCT)
Contact:
Material: CopperAlloy
Plating:
Underplating:
100 μ” [ 2.54 μm ] Nickel - Overall
WipingArea: 30 μ” [ 0.76 μm ] Gold
Solder Tails: 200 μ” [ 5.08 μm ] Tin Lead or Matte Tin (See Ordering Information)
3M Logo, Part Identification Number and Orientation Triangle
Marking:
Electrical
2A(EIA364-70)
Current Rating:
Insulation Resistance:
Withstanding Voltage:
>1 × 109 Ω at 500 VDC
1,000 VRMS at Sea Level
Environmental
-55°C to +105°C
Temperature Rating:
260°C - (High Temp PCT insulator verson), single pass, (profile per J-STD-020C)
(PBT insulator version), maximum insulator temperature 191°C (solder wave
process only)
Process Rating:
1 (per J-STD-020C) High Temp. (PCT) versions only
Moisture Sensitivity Level:
UL File No.: E68080
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M™ Four-Wall Condo Header
.100” × .100” RightAngle
3000 Series
-L30X
-L20X
-L00X
Header with Long Ejector/Latch
for 3M Sockets with Strain Relief
Header with Short Ejector/Latch
for 3M Sockets without Strain Relief
Header without Latch Ejectors
.08 [2.0]
.08 [2.0]
.573 ± .010
[14.55]
.424 ± .010
[10.77]
1.28 Ref
[32.5]
1.18 Ref
[29.9]
A
.37 Ref
[9.4]
.46 Ref
[11.7]
D
REF.
.28
7.1
.100
2.54
.020
0.51
.660
16.76
.100
REF.
2.54
.100
2.54
REF.
POSITION #1
A
Position 1
Orientation
Triangle
Notch B
(See Table 1)
Notch C
(See Table 1 & Note 1)
Notch A
(See Table 1 & Note 1)
.020
[0.51]
.24 [6.1]
.16 [4.1]
.025 Sq Typ
[0.63]
.89
[22.6]
.51
[13.0]
.100 [2.54]
REF.
.20 [5.1]
C
.112 ± .01
[2.84]
.035 [0.89]
2X ø .100
TS-0774-E
Sheet 2 of 3
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3Mconnector.com
3M™ Four-Wall Condo Header
.100” × .100” RightAngle
3000 Series
Table 1
Dimensions
Pin
3M Part
Polarizing
Notches
Quantity Number
A
C
D
20
28
3793
3314
3408
3428
3627
3429
3440
3431
3432
3433
3372
3764
1.26 (32.1)
1.46 (37.2)
1.56 (39.7)
1.76 (44.8)
1.96 (49.8)
2.06 (52.4)
2.26 (57.4)
2.46 (62.6)
2.76 (70.2)
3.26 (82.9)
3.76 (95.6)
3.96 (100.7)
0.865 (21.97)
1.065 (27.05)
1.165 (29.59)
1.365 (34.67)
1.565 (39.75)
1.665 (42.29)
1.865 (47.37)
2.065 (52.45)
2.365 (60.07)
2.865 (72.77)
3.365 (85.47)
3.565 (90.55)
0.71 (18.0)
0.91 (23.1)
1.01 (25.6)
1.21 (30.7)
1.41 (35.8)
1.51 (38.3)
1.71 (43.4)
1.91 (48.5)
2.21 (56.1)
2.71 (68.8)
3.21 (81.5)
3.41 (86.6)
BC
BC
32
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
40
48
52
60
68
80
100
120
128
.232
[5.89]
.029 Typ
[0.74]
ø.040 .003
[ 1.02 ]
(After Plating)
ø.100Typ
[2.54]
.100 Typ
[2.54]
Position 1
.100
[2.54]
Recommended Hole Pattern
Notes:
1. Notches A & C will accomodate 3M Polarizing Key (3M Part Number 3518 or N3518).
2. 112 [2.84] tail length suitable for .062 [1.57] thick pc board.
3. Contact your 3M sales representative for custom requirements.
4. Use of snap-in style latch/ejectors in either short (X3XXX-L502XX) or X3XXX-L602XX) styles, installed or shipped
separately (-5 & -6 snap-in latches are dimensionally and functionally equivalent to -2 & -3 roll pin latches)
If ordering Snap-In style latches separately, please use the below chart
Inch
(mm)
Short Latch
3505-30
Long Latch
3505-31
Color
Gray
Black
Tolerance Unless Noted
High Temp (PBT)
High Temp (PPA)
.00
± .01
.000
± .005
.0
N3505-30B
N3505-31B
Inch
± .1
[ ] Dimensions for
Reference only
Ordering Information
X3XXX - LX02XX
RB = 30 μ” [0.76 μm] Gold with Matte Tin Tails (App. E1 & C1 Apply)
Blank or UB = 30 μ” [0.76 μm] Gold with Tin Lead Tails (App. E3 & C2 Apply)
N = High Temp Black (PCT) (RB Plating Req’d)
Blank = Std.Temp Gray (PBT) (Blank or UB Pltg. Req’d.)
Latch/Ejector System
0 = No Latch/Ejector Installed
2 = Short, Roll Pin Latch/Ejectors
3 = Long, Roll Pin Latch/Ejectors
3M Part Number
TS-0774-E
Sheet 3 of 3
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3Mconnector.com
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnector.com
Please recycle. Printed in USA.
© 3M 2010. All rights reserved.
RIA-2217B-E
3M is a trademark of 3M Company.
相关型号：
3764-L302
Board Connector, 128 Contact(s), 4 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Gray Insulator, Receptacle
3M
3764003UB
Board Connector, 128 Contact(s), 4 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Black Insulator
3M
3764202RB
Board Connector, 128 Contact(s), 4 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Black Insulator
3M
3764202UB
Board Connector, 128 Contact(s), 4 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Black Insulator
3M
3764203RB
Board Connector, 128 Contact(s), 4 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Black Insulator
3M
3764203UB
Board Connector, 128 Contact(s), 4 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Black Insulator
3M
3764302RB
Board Connector, 128 Contact(s), 4 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Black Insulator
3M
3764302UB
Board Connector, 128 Contact(s), 4 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Black Insulator
3M
3764303RB
Board Connector, 128 Contact(s), 4 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Black Insulator
3M
©2020 ICPDF网 联系我们和版权申明