926142-01-14-EU [3M]
14 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER, ROHS COMPLIANT;型号: | 926142-01-14-EU |
厂家: | 3M ELECTRONICS |
描述: | 14 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER, ROHS COMPLIANT 连接器 |
文件: | 总4页 (文件大小:1429K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3M™ Pin Strip Header
.100" × .100" Board Stacking
92X Series
• 35 sizes (4 to 72 position)
• Standard .025″ square posts
• .100″ spacing between posts
• Board pin retention feature available
• See Regulatory Information Appendix (RIA)
for chemical compliance information
TS-0541-B
Sheet 1 of 2
Date Modified: May 207
Physical
Insulation
Material:
Flammability:
Color:
Glass Filled Polyester PBTor igh Temperature PCT
UL 94V-0
Black
Contact
Material:
Copper ll
Plating
Underplating:
Wiping Area:
Mark
57 μm ] Nickel
10 μ0.25 μm ] Gold
e
Electrical
Cent Rating:
2.5 A
9
Insultion Resistance:
Withstanding Voltage:
> 5 × 10 Ω at 500 V
DC
1500 V
at Sea Level
RMS
Environmal
Temperature Rating:
-40°C to +105°C
Process Rating:
260°C, (High Temperature (PCT) ) version only single pass
(profile per J-STD-020C)
(Standard Temperature (PBT) version), Maximum molded
insulator temperature 191°C (Solder Wave Process Only)
Moisture Sensivity Level:
1 (per J-STD-020C) High Temperature (PCT) version only
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Pin Strip Header
.100" × .100" Board Stacking
92X Series
Table 1
Plating
3M Part Number Tail Length Code
Dimensions
B
A
E
01
01
28
0.428 [10.87]
0.100 [ 2.54]
0.628 [15.95]
926142
926382
924527
Gold
0.545 [13.84]
0.235 [ 5.97]
0.100 [ 2.54]
0.793 [20.14]
0.745 [18.92]
1.128 [28.65]
Table 2
.215 [5.46]
C
Pin Code
Pin
Dimension C
(See Note 1)
Quantity
04
06
08
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
70
72
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
0.20 [ 5.1]
0.30 [ 7.6]
0.40 [10.2]
0.50 [12.7]
0.60 [15.2]
0.70 [17.8]
0.80 [20.3]
0.90 [22.9]
1.00 [25.4]
1.10 [27.9]
1.20 [30.5]
1.30 [33.0]
1.40 [35.6]
1.50 [38.1]
1.60 [40.6]
1.70 [43.2]
1.80 [45.7]
1.90 [48.3]
2.00 [50.8]
2.10 [53.3]
2.20 [55.9]
2.30 [58.4]
2.40 [61.0]
2.50 [63.5]
2.60 [66.0]
2.70 [68.6]
2.80 [71.
2.90 [73.
30 [76.2]
3[78.
3.20 1.3]
30 [83.8]
3.40 [86.4]
3.50 [88.9]
3.60 [91.4]
2X .05 Max
[1.27]
(See Note 1)
060
[152]
.100
[2.54]
A ± .008
E Ref
.100
[2.54]
B ± .015
.025 Sq Typ
[0.64]
.100 Typ
[2.54]
Ø .040 ± .003 After Plating
[1.02]
00
2.54]
.100
[2.54]
Recommended Hole Pattern
Notes:
1.Dimension C is a maximum when the pin strip is cut to length, Breaking not recommended on dual row parts.
2.Board pin retention feature available: change from ‘‘926'' to ‘‘9R6'' when ordering.
Ordering Information
92XXXX-XX-XX-XX
3M Part Number
Plating Suffix
Tail Length Code
(See Table 1)
(See Table 1)
I = 10µ" [0.25 µm] Gold all over, PBT insulator (RIA E1 & C1 apply)
Pin Code
(See Table 2)
EU = 10µ" [0.25 µm] Gold all over, PCT insulator (RIA E1 & C1 apply)
TS-0541-B
Sheet 2 of 2
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/
EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party uppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC
This product contains lead in the compliant pin area in excess of the maximncentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, amended by Commission Decision 2005/618/
EC, unless the substance is in an application that is exempt under EU RoS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon formtion provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3Metory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance witthe arranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of ertain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/61C
This product contains lead in the solder tail rea in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writis information represents 3M’s best knowledge and belief based upon
information provided by third party suto 3M.
In the event any product is provnot o conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: Europan Union RoHS
Directive 2002/95/Resriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU ssion Decision 2005/618/EC.
This product contaiecaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/17/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision
2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party
suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217-B
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits
for Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,
means that the product or part does not contain any of the following substances in excess of the following maximum
concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium,
polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise
stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by
third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
20
Appendix C2: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Reqements for Concentration Limits
for Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,
means that the product or part does contain a substance, as detailed in the chaw, in excess of the following
maximum concentration values in any homogeneous material: (a) 0.1% (by wefor lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethersor (b) 0.01% (by weight) for cadmium. Unless
otherwise stated by 3M in writing, this information represents 3M’s best owedge and belief based upon information
provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be cotrued as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is std ow. In the event any product is proven not to conform
with 3M’s Regulatory Information Appendix, then 3M’s entiliability and Buyer’s exclusive remedy will be in
accordance with the product Warranty stated below.
Nae and Content of Hazardous Substances or Elements
Important Notice
All statements, technical inforation, and recommendations related to 3M’s products are based on information believed to be reliable, but the
accuracy or completenot guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended
application. You asssks and liability associated with such use. Any statements related to the product which are not contained in 3M’s
current publications, or contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in
writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER
WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to
replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any
indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
3
Electronic Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
800/225-5373
www.3M.com/interconnects
RIA-2217-B
© 3M 2007
相关型号:
©2020 ICPDF网 联系我们和版权申明