929500-01-35-RK [3M]

35 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER, ROHS COMPLIANT;
929500-01-35-RK
型号: 929500-01-35-RK
厂家: 3M ELECTRONICS    3M ELECTRONICS
描述:

35 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER, ROHS COMPLIANT

连接器
文件: 总6页 (文件大小:752K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
3MPin Strip Header  
.100”, .295” Mating Length, Straight & RightAngle, Solder Tails  
•ꢀ Stackable  
929 Series  
•ꢀ Tin Lead or gold plating available  
•ꢀ Solder stand-offs facilitate production wave soldering  
•ꢀ Board pin retention feature available  
•ꢀ See Regulatory InformationAppendix (RIA) for  
chemical compliance information  
Date Modified: August 18, 2008  
TS-0768-B  
Sheet 1 of 3  
Physical  
Insulation:  
Material: Glass Filled Polyester (PBT) or High Temperature PCT  
Flammability: UL 94V-0  
Color: Black  
Contact:  
Material:  
CopperAlloy  
Plating:  
Underplating: 50 μ” [1.27 μm] Nickel  
WipingArea and Solder Tails: See ordering information  
Marking: None  
Electrical  
2.5A  
Current Rating:  
Insulation Resistance:  
Withstanding Voltage:  
> 5 × 109 Ω at 500VDC  
1500VRMS at Sea Level  
Environmental  
-40°C to +105°C  
Temperature Rating:  
260°C (per J-STD-020C) for PCT insulator parts only  
(PBT insulator version), maximum insulator temperature 191°C,  
(Wave Solder Process Only)  
Process Rating:  
1 (per J-STD-020C) PCT insulator version only  
Moisture Sensitivity Level:  
UL File No.: E68080  
3M is a trademark of 3M Company.  
For technical, sales or ordering information call  
800-225-5373  
3
Electronic Solutions Division  
Interconnect Solutions  
http://www.3M.com/interconnects/  
3MPin Strip Header  
.100”, .295” Mating Length, Straight & RightAngle, Solder Tails  
929 Series  
Straight  
A
See Note  
2X .05 Max  
[1.27]  
.096 [2.44]  
.295  
[ 7.49 ]  
.048 [1.22]  
.110 [2.79]  
.130 p .015  
[ 3.30 ]  
.015 [0.38]  
.100 Typ [2.54]  
.025 p .001 Sq Typ  
[0.64]  
C
.040 p .003 After Plating  
[1.02]  
Inch  
[mm]  
Tolerance Unless Noted  
.00  
.000  
.0  
±.005  
±.01  
±.1  
inch  
[ ] Dimensions for  
Reference only  
.100 p .003  
[2.54]  
Recommended Hole Pattern  
Note:  
A = .10” [2.5] × pin quantity per row. Dimension A is a maximum when the pin strip is cut to length, not when the strip is broken to length.  
Ordering Information  
Tin  
Gold  
9X9400-01-XX-XX  
9X9450-01-XX-XX  
Board Retention Feature  
Pin Quantity  
(01-36)  
Gold Plating Suffix  
2 = None  
I = 10 μ” [0.25 μm] all over, PBT insulator  
(RIA E1 & C1 apply)  
R = Kinked Tails  
EU = 10 μ” [0.25 μm] all over, PCT insulator  
(RIA E1 & C1 apply)  
Plating Suffix:  
blank = 100 μ” [2.54 μm] tin-lead, PBT insulator  
(RIA E3 & C2 apply)  
Board Retention Feature  
2 = None  
R = Kinked Tails  
Pin Quantity  
(01-36)  
RK = 200 μ” [5 μm] matte tin, PCT insulator  
(RIA E1 & C1 apply)  
TS-0768-B  
Sheet 2 of 3  
3M is a trademark of 3M Company.  
3
For technical, sales or ordering information call  
800-225-5373  
Electronic Solutions Division  
Interconnect Solutions  
http://www.3M.com/interconnects/  
3MPin Strip Header  
.100”, .295” Mating Length, Straight & RightAngle, Solder Tails  
929 Series  
Right Angle  
A
See Note  
..096 [2.44]  
.295  
[ 7.49 ]  
2X .05 Max  
[1.27]  
.048 [1.22]  
.110 [2.79]  
.235 p .015  
[5.97]  
.015 [0.38]  
.100 Typ [2.54]  
.130 p .015  
[ 3.30 ]  
.025 p .001 Sq Typ  
[0.64]  
.040 p .003 After Plating  
[1.02]  
C
.100 p .003  
[2.54]  
Inch  
[mm]  
Tolerance Unless Noted  
Recommended Hole Pattern  
.00  
.000  
.0  
±.005  
±.01  
±.1  
inch  
[ ] Dimensions for  
Reference only  
Note:  
A = .10” [2.5] × pin quantity per row. Dimension A is a maximum when the pin strip is cut to length, not when the strip is broken to length.  
Ordering Information  
Tin  
Gold  
9X9500-01-XX-XX  
9X9550-01-XX-XX  
Board Retention Feature  
Pin Quantity  
(01-36)  
Plating Suffix  
2 = None  
I = 10 μ” [0.25 μ”] all over, PBT insulator  
(RIA E1 & C1 apply)  
R = Kinked Tails  
Plating Suffix:  
EU = 10 μ” [0.25 μm] all over, PCT insulator  
(RIA E1 & C1 apply)  
blank = 100 μ” [2.5 μm] tin-lead, PBT insulator  
Board Retention Feature  
2 = None  
R = Kinked Tails  
(RIA E3 & C2 apply)  
RK = 200 μ” [5 μm] matte tin, PCT insulator  
(RIA E1 & C1 apply)  
Pin Quantity  
(01-36)  
TS-0768-B  
Sheet 3 of 3  
3M is a trademark of 3M Company.  
3
For technical, sales or ordering information call  
800-225-5373  
Electronic Solutions Division  
Interconnect Solutions  
http://www.3M.com/interconnects/  
Regulatory Information Appendix  
3M Electronic Solutions Division/Interconnect  
EUROPE  
Appendix E1: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as  
amended by EU Commission Decision 2005/618/EC.  
This product is RoHS Compliant 2005/95/EC.  
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of  
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless  
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information  
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
Appendix E2: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as  
amended by EU Commission Decision 2005/618/EC.  
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is  
compliant by exemption under EU Commission Decision 2005/747/EC.  
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of  
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless  
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information  
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
Appendix E3: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as  
amended by Commission Decision 2005/618/EC.  
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.  
Unless otherwise stated by 3M in writing, this information represents 3Ms best knowledge and belief based upon information  
provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
Appendix E4: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as  
amended by EU Commission Decision 2005/618/EC, as amended by EU Commission Decision 2005/717/EC, as amended by  
EU Court of Justice Decision 2008/C 116/04  
This product contains decaBDE in the insulating material in excess of the maximum concentration allowed for finished  
products subject to EU RoHS that are placed on the EU market after June 30, 2008.  
Unless otherwise stated by 3M in writing, this information represents 3Ms best knowledge and belief based upon information  
provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below.  
RIA-2217A-E  
Appendix E5: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as  
amended by EU Commission Decision 2005/618/EC.  
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under  
Item 6 of the Annex to the Directive.  
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of  
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless  
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information  
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
CHINA  
Appendix C1: China RoHS  
Electronic Industry Standard of the Peoples Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for  
Certain Hazardous Substances in Electronic Information Products.  
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the  
product or part does not contain any of the following substances in excess of the following maximum concentration values in any  
homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated  
diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this  
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
Appendix C2: China RoHS  
Electronic Industry Standard of the Peoples Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain  
Hazardous Substances in Electronic Information Products.  
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that  
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration  
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or  
polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in  
writing, this information represents 3Ms best knowledge and belief based upon information provided by third party suppliers to 3M.  
The numerical reference in the symbol above should not be construed as a representation regarding the products life or an  
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with  
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the  
product Warranty stated below.  
RIA-2217A-E  
Appendix C3: China RoHS  
Electronic Industry Standard of the Peoples Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for  
Certain Hazardous Substances in Electronic Information Products.  
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that  
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration  
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or  
polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in  
writing, this information represents 3Ms best knowledge and belief based upon information provided by third party suppliers to 3M.  
The numerical reference in the symbol above should not be construed as a representation regarding the products life or an  
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with  
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the  
product Warranty stated below.  
Important Notice  
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness  
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated  
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order  
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.  
Warranty; Limited Remedy; Limited Liability.  
This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,  
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty  
period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where  
prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the  
legal theory asserted.  
3
3M Electronics Solutions Division  
6801 River Place Blvd.  
Austin, TX 78726-9000  
U.S.A.  
1-800-225-5373  
www.3m.com/interconnects  
Please recycle. Printed in USA.  
© 3M 2008. All rights reserved.  
RIA-2217A-E  
3M is a trademark of 3M Company.  

相关型号:

929500-01-36

Board Connector, 36 Contact(s), 1 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Black Insulator, Receptacle
3M

929500-01-36-RK

36 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER, ROHS COMPLIANT
3M

92953-102LF

Board Connector, 168 Contact(s), 4 Row(s), Female, Right Angle, Solder Terminal, LEAD FREE
AMPHENOL

92953-103

Board Connector, 168 Contact(s), 4 Row(s), Female, Right Angle, Solder Terminal
AMPHENOL

92953-103LF

Board Connector, 168 Contact(s), 4 Row(s), Female, Right Angle, Solder Terminal, LEAD FREE
AMPHENOL

92953-201

Board Connector, 168 Contact(s), 4 Row(s), Female, Right Angle, Solder Terminal
AMPHENOL

92953-202

Board Connector, 168 Contact(s), 4 Row(s), Female, Right Angle, Solder Terminal
AMPHENOL

92953-203

Board Connector, 168 Contact(s), 4 Row(s), Female, Right Angle, Solder Terminal
AMPHENOL

92953-302LF

Board Connector, 168 Contact(s), 4 Row(s), Female, Right Angle, Solder Terminal, LEAD FREE
AMPHENOL

92953-303

Board Connector, 168 Contact(s), 4 Row(s), Female, Right Angle, Solder Terminal
AMPHENOL

92953-303LF

Board Connector, 168 Contact(s), 4 Row(s), Female, Right Angle, Solder Terminal, LEAD FREE
AMPHENOL

92953-901

Board Connector, 168 Contact(s), 4 Row(s), Female, Right Angle, Solder Terminal
AMPHENOL