929700-11-17-RK [3M]
17 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER, ROHS COMPLIANT;
| 型号： | 929700-11-17-RK |
| 厂家： | 
3M ELECTRONICS |
| 描述： | 17 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER, ROHS COMPLIANT 连接器 |
| 文件： | 总7页 (文件大小：621K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
3M™ Pin Strip Header Single and Dual Row
.100”, .235”/.318” Mating Length, Straight & RightAngle, Solder Tails
• Stackable
929 Series
• Gold, Matte Sn, or Tin-Lead plating options
• High Temperature (PCT) plastic for Wave or IR
soldering
• Solder stand-off for wave soldering
• Board pin retention feature option
• See Regulatory InformationAppendix (RIA) for
chemical compliance information
Date Modified: November 6, 2008
TS-0769-E
Sheet 1 of 4
Physical
Insulation:
Material: Glass Filled Polyester (PBT) or High Temperature (PCT)
Flammability: UL 94V-0
Color: Black
Contact:
Material:
CopperAlloy
Plating:
Underplating: 50 µ” [1.27 µm] Nickel
WipingArea and Solder Tails: See ordering information (Gold, Matte Tin, Tin-Lead options)
Marking: None
Electrical
2.5A
Current Rating:
Insulation Resistance:
Withstanding Voltage:
> 5 × 109 Ω at 500VDC
1500VRMS at Sea Level
Environmental
-40°C to +105°C
Temperature Rating:
260°C (per J-STD-020C) for PCT parts only
(PBT insulator version), maximum insulator temperature 191°C
(Solder Wave Process Only)
Process Rating:
Level 1 (per J-STD-020C) for PCT parts
Moisture Sensitivity Level:
UL File No.: E68080
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M™ Pin Strip Header Single and Dual Row
.100”, .235”/.318” Mating Length, Straight & RightAngle, Solder Tails
929 Series
C
PCB Edge
0.100 0.00ꢀ
[2.54]
2x .050 Max
[1.27]
"B" .015
0.075 .005
[1.91]
0.040 0.00ꢀ
[1.02]
AFTER PLATING
0.115
[2.92]
0.170
[4.ꢀ2]
Min
RIGHT ANGLE
SOLDER WRAP
TAILS
"C"
.070 .010
[1.78]
0.100 .00ꢀ
[2.54]
0.060
[1.52]
"A" .008
0.040 .00ꢀ
[1.02]
AFTER PLATING
"B" .015
0.100
[2.54]
STRAIGHT
SOLDER WRAP
TAILS
0.100
[2.54] TYP
0.025 0.001 Sꢁ. TYP.
[0.64]
RECOMMENDED HOLE PATTERN
0.100
[2.54]
PCB EDGE
"B" ±.015
0.100±.003
[2.54]
0.170
0.075±0.005
[1.91]
.215
[5.46]
0.100
[2.54]
0.100
[2.54]
0.070±0.005
[1.78]
0.040±.003
"C"
[1.02]
AFTER PLATING
0.100
[2.54]
2x .050 Max.
0.060
[1.52]
[1.27]
0.100±.003
[2.54]
0.040±.003
[1.02]
0.100
[2.54]
"A"±.008
"B"±.015
AFTER PLATING
0.100
[2.54]
STRAIGHT
WIREWRAP TAILS
0.025±0.001 SQ. TYP.
[0.640]
0.100 TYP.
[2.54]
0.100
RECOMMENDED HOLE PATTERN
Inch
[mm]
Tolerance Unless Noted
.00
.000
.0
±.005
±.01
±.1
inch
[ ] Dimensions for
Reference only
Notes:
1. Dimension C is a maximum when the pin strip is cut to length, not when the strip is broken to length.
2. Board pin retention feature available: change from ‘‘9X9’’ to ‘‘9R9’’ when ordering.
3. Breaking of dual row parts is not recommended.
TS-0769-E
Sheet 2 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M™ Pin Strip Header Single and Dual Row
.100”, .235”/.318” Mating Length, Straight & RightAngle, Solder Tails
929 Series
Single Row Tail Length Code
Table 1
Table 2
Dimension C
Pin Quantity
Per Row
(see note 1)
Tail
Length
Code
Dimensions
3M Part
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
0.10 [2.5]
Plating
Number
A
B
0.20 [5.1]
0.30 [7.6]
01
09
02
03
04
05
07
0.110 [2.79]
0.145 [3.68]
0.210 [5.33]
0.410 [10.41]
0.510 [12.95]
0.610 [15.49]
0.910 [23.11]
0.40 [10.2]
0.50 [12.7]
0.60 [15.2]
0.70 [17.8]
0.80 [20.3]
0.90 [22.9]
1.00 [25.4]
1.10 [27.9]
1.20 [30.5]
1.30 [33.0]
1.40 [35.6]
1.50 [38.1]
1.60 [40.6]
1.70 [43.2]
1.80 [45.7]
1.90 [48.3]
2.00 [50.8]
2.10 [53.3]
2.20 [55.9]
2.30 [58.4]
2.40 [61.0]
2.50 [63.5]
2.60 [66.0]
2.70 [68.6]
2.80 [71.1]
2.90 [73.7]
3.00 [76.2]
3.10 [78.7]
3.20 [81.3]
3.30 [83.8]
3.40 [86.4]
3.50 [88.9]
3.60 [91.4]
929647
Straight
0.235 [5.97]
Gold
929648
Right Angle
01
0.235 [5.97]
0.318 [8.08]
0.110 [2.79]
01
11
09
06
01
02
03
04
05
07
0.110 [2.79]
0.125 [3.18]
0.145 [3.68]
0.710 [18.03]
0.110 [2.79]
0.210 [5.33]
0.410 [10.41]
0.510 [12.95]
0.610 [15.49]
0.910 [23.11]
929705
Straight
929834
Straight
0.235 [5.97]
Tin
929835
Right Angle
01
0.235 [5.97]
0.318 [8.08]
0.318 [8.08]
0.110 [2.79]
01
11
06
0.110 [2.79]
0.125 [3.18]
0.710 [18.03]
929700
Straight
929730
Right Angle
01
0.110 [2.79]
Gold
Single Row Ordering Information
9X9XXX-XX-XX-XX
2 = No Pin Retention
R = Pin Retention
Gold Plating Suffix
Location & Thickness (see table 1)
I = 10 μ” [0.25 μm] all over, PBT insulator
(RIA E1 & C1 apply)
EU = 10 μ” [0.25 μm] all over, PCT insulator
(RIA E1 & C1 apply)
3M Part Number (select from Table 1 based
on Dim A and plating)
Pin Quantity Per Row
(see table 2)
(see table1)
Tail Length Code
(see table 1)
Tin
9X9XXX-XX-XX-XX
2 = No Pin Retention
R = Pin Retention
Plating Suffix:
blank = 100 μ” [2.54 μm] tin-lead, PBT
insulator (RIA E3 & C2 apply)
RK = 200 μ” [5 µm] matte tin, PCT
insulator (RIA E1 & C1 apply)
3M Part Number (select from Table 1
based on Dim A and plating)
Pin Quantity Per Row
(see table 2)
(see table1)
Tail Length Code
(see table 1)
TS-0769-E
Sheet 3 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M™ Pin Strip Header Single and Dual Row
.100”, .235”/.318” Mating Length, Straight & RightAngle, Solder Tails
929 Series
Dual Row Tail Length Code
Table 3
Table 4
Pin Quantity
Per Row
Pin Quantity
Total Dual Row
Dimension C
(see note 1)
Dimensions
3M Part
Number
Tail Length
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
02
04
06
08
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
0.10 [2.5]
Plating
Code
A
B
0.20 [5.1]
01
09
02
08
03
04
05
01
11
10
03
06
01
04
02
01
02
01
09
02
08
03
04
05
01
11
09
10
03
06
0.110 [2.79]
0.145 [3.68]
0.210 [5.33]
0.310 [7.87]
0.410 [10.41]
0.510 [12.95]
0.610 [15.49]
0.110 [2.79]
0.125 [3.18]
0.175 [4.45]
0.410 [10.41]
0.710 [18.03]
0.110 [2.79]
0.145 [3.68]
0.405 [10.29]
0.110 [2.79]
0.405 [10.29]
0.110 [2.79]
0.145 [3.68]
0.210 [5.33]
0.310 [7.87]
0.410 [10.41]
0.510 [12.95]
0.610 [15.49]
0.110 [2.79]
0.125 [3.18]
0.145 [3.68]
0.175 [4.45]
0.410 [10.41]
0.710 [18.03]
0.30 [7.6]
0.40 [10.2]
0.50 [12.7]
0.60 [15.2]
0.70 [17.8]
0.80 [20.3]
0.90 [22.9]
1.00 [25.4]
1.10 [27.9]
1.20 [30.5]
1.30 [33.0]
1.40 [35.6]
1.50 [38.1]
1.60 [40.6]
1.70 [43.2]
1.80 [45.7]
1.90 [48.3]
2.00 [50.8]
2.10 [53.3]
2.20 [55.9]
2.30 [58.4]
2.40 [61.0]
2.50 [63.5]
2.60 [66.0]
2.70 [68.6]
2.80 [71.1]
2.90 [73.7]
3.00 [76.2]
3.10 [78.7]
3.20 [81.3]
3.30 [83.8]
3.40 [86.4]
3.50 [88.9]
3.60 [91.4]
929665
Straight
0.235 [5.97]
Gold
929715
Straight
0.318 [8.08]
929667
Right Angle
0.235 [5.97]
0.318 [8.08]
929745
Right
929836
Straight
0.235 [5.97]
Tin
929710
Straight
0.318 [8.08]
0.235 [5.97]
01
0.110 [2.79]
929838
Right Angle
04
0.145 [3.68]
02
0.405 [10.29]
Gold
Dual Row Ordering Information
9X9XXX-XX-XX-XX
2 = No Pin Retention
R = Pin Retention
Gold Plating Suffix
Location & Thickness (see table 1)
I = 10 μ” [0.25 μm] all over, PBT insulator
(RIA E1 & C1 apply)
EU = 10 μ” [0.25 μm] all over, PCT insulator
(RIA E1 & C1 apply)
3M Part Number (select from Table 3
based on Dim A and plating)
(see table 3)
Pin Quantity Per Row
Tail Length Code
(see table 3)
(see table 4)
Tin
9X9XXX-XX-XX-XX
2 = No Pin Retention
R = Pin Retention
Plating Suffix:
blank = 100 μ” [2.54 μm] tin-lead, PBT
insulator (RIA E3 & C2 apply)
3M Part Number (select from Table 3
based on Dim A and plating)
RK = 200 μ” [5 μm] matte tin, PCT
insulator (RIA E1 & C1 apply)
Pin Quantity Per Row
(see table 4)
(see table 3)
Tail Length Code
(see table 3)
TS-0769-E
Sheet 4 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC, as amended by EU Commission Decision 2005/717/EC, as amended by
EU Court of Justice Decision 2008/C 116/04
This product contains decaBDE in the insulating material in excess of the maximum concentration allowed for finished
products subject to EU RoHS that are placed on the EU market after June 30, 2008.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below.
RIA-2217A-E
Appendix E5: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under
Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the
product or part does not contain any of the following substances in excess of the following maximum concentration values in any
homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated
diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain
Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or
polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
RIA-2217A-E
Appendix C3: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or
polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty
period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where
prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the
legal theory asserted.
3
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3m.com/interconnects
Please recycle. Printed in USA.
© 3M 2008. All rights reserved.
RIA-2217A-E
3M is a trademark of 3M Company.
相关型号：
©2020 ICPDF网 联系我们和版权申明