951208-4620AR-PT [3M]

8 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SURFACE MOUNT, ROHS COMPLIANT;
951208-4620AR-PT
型号: 951208-4620AR-PT
厂家: 3M ELECTRONICS    3M ELECTRONICS
描述:

8 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SURFACE MOUNT, ROHS COMPLIANT

连接器
文件: 总5页 (文件大小:463K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
3MPin Strip Header  
2 mm and 2 mm x 2 mm Right Angle, Surface Mount  
951 Series  
High temperature dielectric  
“No lead” reflow solder compatible  
Maximizes use of PC board space  
End stackable feature  
Mates with boardmount and wiremount products  
See Regulatory Information Appendix for  
chemical compliance information  
TS-2158-B  
Date Modified: February 14, 2008  
Sheet 1 of 2  
Physical  
Insulation  
Material: High Temperature Thermoplastic  
Flammability: UL 94V-0  
Color: Black  
Contactꢀ  
Material: Copper Alloy  
Plating  
Underplating: 1.25–2.5 µm [100 µ’’] Nickel  
Wiping Area: 0.25 µm [10 µ’’] Gold  
Solder Tail Area: 1–3 µm [40–118 µ’’] Matte Tin  
Electrical  
CurrentꢀRating: 1 A  
InsulationꢀResistance: > 5 x 108 Ohm at 100 VDC  
WithstandingꢀVoltage: 1000 VDC  
TransitionꢀResistance: ≤ 20 mOhm  
Environmental  
TemperatureꢀRange: -40 °C ... +105 °C  
ProcessingꢀTemperature: max. 260 °C (Profile per J-STD-020C)  
ꢀ MoistureꢀSensitivityꢀLevel: 1 (per J-STD-020C)  
3M is a trademark of the 3M Company  
For technical, sales or ordering information  
call your Local 3M Service Center  
Interconnect Solutions  
http://www.3M.com/interconnects/  
3MPin Strip Header  
2 mm and 2 mm x 2 mm Right Angle, Surface Mount  
951 Series  
PCB-Layout  
PCB-Layout  
Tapeꢀ&ꢀReelꢀOption  
n = No. of Contacts  
9511xx-4620  
4–5  
6–9  
8–16 18–22 24–32 34–44 46–50  
24 32 44 56 72  
10 11–16 17–22 23–25  
(1ꢀRow)  
Contactꢀ  
Quantity  
ToleranceꢀUnlessꢀNotedꢀ[mm]  
NominalꢀSize 0.5–3 3–6 6–30  
LinearꢀDim +/- 0.1 +/- 0.1 +/- 0.2 +/- 0.3  
9512xx-4620  
(2ꢀRow)  
30–120  
TapeꢀWidthꢀ  
[mm]  
16  
Radii  
+/- 0.2 +/- 0.5  
+/- 1  
+/- 1  
Ordering Information  
951XXX  
4620  
AR  
XX  
Rows:  
1 = 1 Row  
2 = 2 Row  
Packaging:  
TP = Tube  
PT = Tube with Pad  
PR = Tape & Reel with Pad  
Contact Quantity:  
03–25 Pins / 1 Row  
06–50 Pins / 2 Row  
Mounting Style:  
4 = Surface Mount, Right Angle  
Plating:  
AR = Selective Au 0.25 µm / Sn  
Ref Appendix E1 & C1  
Note: Pad options  
1 Row – 4 to 25 pos.  
2 Row – 8 to 50 pos.  
TS-2158-B  
Sheet 2 of 2  
3M is a trademark of the 3M Company  
For technical, sales or ordering information  
call your Local 3M Service Center  
Interconnect Solutions  
http://www.3M.com/interconnects/  
Regulatory Information Appendix  
3M Electronic Solutions Division/Interconnect  
EUROPE  
Appendix E1: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as  
amended by EU Commission Decision 2005/618/EC.  
This product is RoHS Compliant 2005/95/EC.  
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of  
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless  
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information  
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3Ms entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
Appendix E2: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as  
amended by EU Commission Decision 2005/618/EC.  
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is  
compliant by exemption under EU Commission Decision 2005/747/EC.  
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of  
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless  
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information  
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3Ms entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
Appendix E3: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as  
amended by Commission Decision 2005/618/EC.  
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.  
Unless otherwise stated by 3M in writing, this information represents 3Ms best knowledge and belief based upon information  
provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3Ms entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
Appendix E4: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as  
amended by EU Commission Decision 2005/618/EC.  
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is  
compliant by exemption under EU Commission Decision 2005/717/EC.  
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of  
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless  
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information  
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3Ms entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below.  
RIA-2217A-D  
Appendix E5: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as  
amended by EU Commission Decision 2005/618/EC.  
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under  
Item 6 of the Annex to the Directive.  
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of  
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless  
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information  
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3Ms entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
CHINA  
Appendix C1: China RoHS  
Electronic Industry Standard of the Peoples Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for  
Certain Hazardous Substances in Electronic Information Products.  
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means  
that the product or part does not contain any of the following substances in excess of the following maximum concentration  
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls  
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this  
information represents 3Ms best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3Ms entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
Appendix C2: China RoHS  
Electronic Industry Standard of the Peoples Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for  
Certain Hazardous Substances in Electronic Information Products.  
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that  
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration  
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls  
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this  
information represents 3Ms best knowledge and belief based upon information provided by third party suppliers to 3M.  
The numerical reference in the symbol above should not be construed as a representation regarding the products life or an  
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with  
3M’s Regulatory Information Appendix, then 3Ms entire liability and Buyer’s exclusive remedy will be in accordance with the  
product Warranty stated below.  
RIA-2217A-D  
Appendix C3: China RoHS  
Electronic Industry Standard of the Peoples Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for  
Certain Hazardous Substances in Electronic Information Products.  
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that  
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration  
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls  
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this  
information represents 3Ms best knowledge and belief based upon information provided by third party suppliers to 3M.  
The numerical reference in the symbol above should not be construed as a representation regarding the products life or an  
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with  
3M’s Regulatory Information Appendix, then 3Ms entire liability and Buyer’s exclusive remedy will be in accordance with the  
product Warranty stated below.  
Important Notice  
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness  
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated  
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order  
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.  
Warranty; Limited Remedy; Limited Liability.  
This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,  
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty  
period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where  
prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the  
legal theory asserted.  
3
3M Electronics Solutions Division  
6801 River Place Blvd.  
Austin, TX 78726-9000  
U.S.A.  
1-800-225-5373  
www.3m.com/interconnects  
Please recycle. Printed in USA.  
© 3M 2008. All rights reserved.  
RIA-2217A-D  
3M is a trademark of 3M Company.  

相关型号:

951208-4620AR-TP

8 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SURFACE MOUNT, ROHS COMPLIANT
3M

951208-7622-AR

8 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER, ROHS COMPLIANT
3M

951208-7722-AR

8 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER, ROHS COMPLIANT
3M

951208-8622-AR

8 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER, ROHS COMPLIANT
3M

951210-2530-AR-PR

TWO PART BOARD CONNECTOR
3M

951210-2530-AR-PT

TWO PART BOARD CONNECTOR
3M

951210-4620-AR-PT

Board Connector, 10 Contact(s), 2 Row(s), Male, Right Angle, 0.079 inch Pitch, Surface Mount Terminal, Black Insulator, Receptacle, ROHS COMPLIANT
3M

951210-4620-AR-TP

Board Connector, 10 Contact(s), 2 Row(s), Male, Right Angle, 0.079 inch Pitch, Surface Mount Terminal, Black Insulator, Receptacle, ROHS COMPLIANT
3M

951210-4620AR-PR

10 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SURFACE MOUNT, ROHS COMPLIANT
3M

951210-4620AR-TP

10 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SURFACE MOUNT, ROHS COMPLIANT
3M

951210-7622-AR

10 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER, ROHS COMPLIANT
3M

951210-7722-AR

10 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER, ROHS COMPLIANT
3M