CP2-SA110-1-TGFJ [3M]
HEADER CONNECTOR,PCB MNT,PLUG,110 CONTACTS,SKT,0.079 PITCH,COMPLIANT FIT TERMINAL;型号: | CP2-SA110-1-TGFJ |
厂家: | 3M ELECTRONICS |
描述: | HEADER CONNECTOR,PCB MNT,PLUG,110 CONTACTS,SKT,0.079 PITCH,COMPLIANT FIT TERMINAL PC 连接器 |
文件: | 总2页 (文件大小:677K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3M™ CP2 Press-Fit Socket
2 mm TypeA 110 Signal Contacts RightAngle
CP2 Series
•
•
•
25mm basic system unit
50mm module
Designed according to IEC 61076-4-101 and IEC 60352-5
Standards
•
•
2 mm grid spacing allows for high signal density at low cost
“Eye of the Needle” compliant pin press-fit design reduces
manufacturing time and cost
•
Additional grounding row available for improved ground bounce
and EMI immunity
•
•
Mates with 5 row 3M™ MetPak™ HM, and CP2 headers
End-to-end stackable with 5 row 3M™ MetPak™ HSHM, HM, and
CP2 sockets
•
See Regulatory InformationAppendix (RIA) for chemical
compliance information
Date Modified: February 15, 2008
TS-2266-A
Sheet 1 of 2
Physical
Insulation:
Material: High Temperature Thermoplastic (LCP)
Flammability: UL94V-0
Contact:
Material: CopperAlloy
Plating: See Ordering Information
Mechanical
Mating Force: ≤ 0.75N/PIN
Withdrawl Force: ≥ 0.15N/PIN
Mating and Un-mating Operations: 50
Electrical
Contact Resistance: ≤ 20 mΩ
Insulation Resistance: ≥ 10,000 MΩ
TestVoltage: 750VACRMS
Environmental
Temperature Ratings: -55°C to +125°C
PCB Data
Recommended PCB Plated Through Hole: Φ 0.6 0.05 mm
Drill Hole Diameter: Φ 0.7 0.02 mm
Hole platings: Cu 25~50 μm, Sn or SnPb<10 μm
PCB thickness: 1.4-4.2 mm
Press-In Force: ≤ 204N/pin on nominal hole diameter
Retention Force: ≥ 13.5N/pin on nominal hole diameter
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M™ CP2 Press-Fit Socket
2 mm TypeA 110 Signal Contacts RightAngle
CP2 Series
mm
[Inch]
Tolerance Unless Noted
.0
0.3
.00
0.
1
0.13
mm
[ ] Dimensions for
Reference only
Recommended PCB Layout
Ordering Information
CP2-SA110-X1-XXXX
Shield Options
G= Upper Shield
Blank= No Shield
Plating Options
TG30= 30~40 μ“ Gold Contact Area
100~200 μ“ Bright Tin-Lead
50~80 μ“ Nickel Underplate
(RIA E2 & C2 apply)
FJ= 10~20 μ“ Gold Contact Area
200~300 μ“ Matte Tin
50~80 μ“ Nickel Underplate
(RIA E1 & C1 apply)
KR= 30~40 μ“ Gold Contact Area
200~300 μ“ Matte Tin
50~80 μ“ Nickel Underplate
(RIA E1 & C1 apply)
• This diagram serves only for Part Number descriptive definitions.
TS-2266-A
Sheet 2 of 2
PLEASE CONTACT YOUR LOCAL SALES REPRESENTATIVE FOR CUSTOMER SPECIFIC PROGUCT CONFIGURATIONS.
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
相关型号:
CP2-SA110-1-TGKR
HEADER CONNECTOR,PCB MNT,PLUG,110 CONTACTS,SKT,0.079 PITCH,COMPLIANT FIT TERMINAL
3M
CP2-SA110-G1-KR
110 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, PRESS FIT, SOCKET, ROHS COMPLIANT
3M
CP2-SA110-G1-TG30
110 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, PRESS FIT, SOCKET
3M
CP2-SA110-G1-TGKR
HEADER CONNECTOR,PCB MNT,PLUG,110 CONTACTS,SKT,0.079 PITCH,COMPLIANT FIT TERMINAL
3M
CP2-SA1101-FJ
110 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, PRESS FIT, SOCKET, ROHS COMPLIANT
3M
CP2-SA1101-KR
110 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, PRESS FIT, SOCKET, ROHS COMPLIANT
3M
CP2-SA1101-TG30
Board Connector, 110 Contact(s), 6 Row(s), Female, Right Angle, 0.079 inch Pitch, Press Fit Terminal, Socket
3M
CP2-SAB095-G1-FJ
HEADER CONNECTOR,PCB MNT,95 CONTACTS,SKT,0.079 PITCH,COMPLIANT FIT TERMINAL,LOCKING
3M
CP2-SAB095-G1-KR
HEADER CONNECTOR,PCB MNT,95 CONTACTS,SKT,0.079 PITCH,COMPLIANT FIT TERMINAL,LOCKING
3M
CP2-SAB110-G1-FJ
110 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, PRESS FIT, SOCKET, ROHS COMPLIANT
3M
CP2-SB095-1-FJ
95 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, PRESS FIT, SOCKET, ROHS COMPLIANT
3M
©2020 ICPDF网 联系我们和版权申明