D3869-5302AR_技术文档

3M^™Four-Wall Header

.100” × .100” Latch/Ejector, Straight and RightAngle

D3000 Series

•ꢀ Military (with 3M’s 3518 & N3518 polarizing key)

and centerbump polarization

•ꢀ Optional ejector latches

•ꢀ Mounting holes for securing header to board

•ꢀ Optional polarizing posts available

•ꢀ High temperature insulator suitable for “no lead”

soldering operations

•ꢀ High temperature insulator in through-hole version

suitable for “paste in hole” reﬂow soldering

•ꢀ RoHSꢀCompliant.ꢀSeeꢀtheꢀRegulatoryꢀInformationꢀ

Appendixꢀ(RIA)ꢀinꢀtheꢀ“RoHSꢀcompliance”ꢀsectionꢀofꢀ

www.3Mconnectors.comꢀforꢀcomplianceꢀinformationꢀꢀ

(RIAꢀE1ꢀandꢀC1ꢀapply)

Date Modiﬁed: May 21, 2012

TS-2245-F

Sheet 1 of 4

Physical

Insulator:

Material: High Temp Glass Filled Polyester (PCT)

Flammability: UL 94V-0

Color: Black (PCT)

Contact:

Material: Brass

Plating:

Underplating:

50 -150 μ” [ 1.25 μm ] Ni

WipingArea: 15 μ” [0.381 μm] Gold

Solder Tails: 40 - 120 μ” [ 1-3 μm ] Matte Tin

3M Logo, Part Identiﬁcation Number and Orientation Triangle

Marking:

Electrical

5.00A, 1 Contact Powered

3.00A, 6 Contacts Powered

1.75A, All Contacts Powered

Current Rating:

Rating Conditions: EIA-364-070 Method 2, 30°C maximum temperature rise, 20%

derated. Reference appropriate 3M Product Speciﬁcation for detailed current

derating curves.

>1 × 10⁹Ω at 500V_DC

Insulation Resistance:

Withstanding Voltage:

1,000V_RMSat Sea Level

Environmental

-55°C to +105°C

Temperature Rating:

260°C, proﬁle per J-STD-020C, single pass

1 (per J-STD-020C)

Process Rating:

Moisture Sensitivity Level:

UL File No.: E68080

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3

Electronic Solutions Division

Interconnect Solutions

http://www.3Mconnectors.com

3M^™Four-Wall Header

.100” × .100” Latch/Ejector, Straight and RightAngle

D3000 Series

-X2XX

-X3XX

Header with

Short Ejector/Latch

for 3M Sockets without

Strain Relief

-X0XX

Header with

Header without Latch Ejector

Long Ejector/Latch

for 3M Sockets with

Strain Relief

.08

[2.0]

.08

[2.0]

.573 .010

[ 14.55 ]

.424 .010

[ 10.77 ]

1.07 Ref

[27.2]

.97 Ref

[24.6]

.37 Ref

[9.4]

.46 Ref

[11.7]

.025 .002 Sq Typ

[ 0.64 ]

D

.28

7.1

.100

2.54

REF.

.020

0.51

.24

[6.1]

.34

8.6

.25

6.4

.13

.30

[7.6]

3.3

.100

REF.

2.54

2X O .100 [2.54]

SEE NOTE #2

POSITION #1

B

Dim. E

C

L

“Y”

Notch A

(See Table 1 & Note1)

F Typ

Position 1

Orientation

Triangle

Notch B

Section A-A

(Straight)

(See Table 1)

Notch C

(See Table 1 & Note 1)

.025 .002 Sq Typ

[ 0.64 ]

.16

[4.1]

.21

[5.3]

A

B

.24

[6.1]

.68

[17.3]

F Typ

“Y”

.12

[3.0]

.35

[8.9]

.30

[7.6]

C

L

.020

[0.51]

Dim. E

.197

[5.00]

.049 Ref

[1.24]

B

A

.20

[5.1]

C

A

2X ø .100

[2.54]

(See Note 2)

.100 Ref

[2.54]

Section B-B

(Right Angle)

TS-2245-F

Sheet 2 of 4

3M is a trademark of 3M Company.

3

For technical, sales or ordering information call

Electronic Solutions Division

Interconnect Solutions

800-225-5373

http://www.3Mconnectors.com

3M^™Four-Wall Header

.100” × .100” Latch/Ejector, Straight and RightAngle

D3000 Series

Table 1

Dimensions

3M Part

Pin Qty

Polarizing

Notches

Number

A

B

C

D

06

08

10

14

16

20

24

26

30

34

40

50

60

64

3869

3889

3793

3314

3408

3428

3627

3429

3440

3431

3432

3433

3372

3764

1.065 (27.05)

1.165 (29.59)

1.265 (32.13)

1.465 (37.21)

1.565 (39.75)

1.765 (44.83)

1.965 (49.91)

2.065 (52.45)

2.265 (57.53)

2.465 (62.61)

2.765 (70.23)

3.265 (82.93)

3.765 (95.63)

3.965 (100.71)

0.905 (22.99)

1.005 (25.53)

1.105 (28.04)

1.305 (33.12)

1.405 (35.66)

1.605 (40.74)

1.805 (45.82)

1.905 (48.36)

2.105 (53.44)

2.305 (58.52)

2.605 (66.14)

3.105 (78.84)

3.605 (91.54)

3.805 (96.62)

0.665 (16.89)

0.765 (19.43)

0.865 (21.97)

1.065 (27.05)

1.165 (29.59)

1.365 (34.67)

1.565 (39.75)

1.665 (42.29)

1.865 (47.37)

2.065 (52.45)

2.365 (60.07)

2.865 (72.77)

3.365 (85.47)

3.565 (90.55)

0.505 (12.83)

0.605 (15.37)

0.705 (17.91)

0.905 (22.99)

1.005 (25.53)

1.205 (30.61)

1.405 (35.69)

1.505 (38.23)

1.705 (43.31)

1.905 (48.39)

2.205 (56.01)

2.705 (68.71)

3.205 (81.41)

3.405 (86.49)

B*

Inch

(mm)

BC

Tolerance Unless Noted

BC

.00

.01

.000

.005

.0

.1

ABC

[ ] Dimensions for

Reference only

* Available without center notch B. Contact 3M.

Table 2

Pin Cross Section

Diagonals

3M Part

Contact Tail

Number Sufﬁx

Dim E

Dimension G

Dim F

Corner Radii

-5XX2

-6XX2

Solder Tail for

.062 [1.57]

Thick PC Board

.0075 Ref

[0.191]

Ø.035 .003

[0.89] (See Note 3)

.112 .010

[2.84]

.0245 .0005

[0.622]

.028 ..001

[0.71]

or ø.116

[2.95]

ø.106

[2.69]

ø.106

[2.69]

or

ø.116

[2.95]

.41

[10.4]

Max to Edge of PCB

for Daisy Chain

(See Note 2)

.300

[7.62]

Dim G

Side to Side Stackability

Dim G

"Y"

C

L

C

L

“Y”

Position 1

.029

.060

[1.52]

[0.74]

.100 .003

[2.54]

.100 .003

[2.54]

.100 .003

[2.54]

.232

[5.89]

.352

[8.94]

.100 .003

[2.54]

B

C

Recommended Mounting Hole Pattern

(Straight)

(Right Angle)

Notes:

1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #3518 or #N3518).

2. Mounting hardware: From solder side of pc board use #4-24 thread cutting screw (3M Part # 3341-5) and .116 [2.95] dia mounting hole.

For right angle version only, #2-56 bolt and nut (3M Part # 3341-6) with .106 [2.69] dia mounting hole may be used. See illustrations on page 4.

3. Contact your 3M sales representative for custom requirements.

Ordering Information

D3XXX - XX02AR

3M Part Number

Tail

Pin Conﬁguration

5 = Right Angle Solder Tails

6 = Straight Solder Tails

(See Table 1)

02 = for .062 [1.57] thick board

Latch/Ejector System

0 = No Latch/Ejector installed

2 = Short Roll Pin Latch/Ejectors

3 = Long Roll Pin Latch/Ejectors

TS-2245-F

Sheet 3 of 4

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3

Electronic Solutions Division

Interconnect Solutions

http://www.3Mconnectors.com

3M^™Four-Wall Header

,ꢀAccessories

.100” × .100” Latch/Ejector, Straight and RightAngle

D3000 Series

Part Customization

This spec sheet details our standard offering.

Polarizing Post

3M has several capabilities that can provide a

part tailored to your speciﬁc needs. Ask your

3M sales representative or customer service for

more details.

.321

[8.15]

3201-4

LC P

B lac k

.100 Dia

[2.54]

•ꢀTheꢀ-2ꢀ&ꢀ-3ꢀrollꢀpinꢀlatchesꢀ(mayꢀbeꢀorderedꢀ

Note: Insert Post into one mounting hardware hole on

bottom of header. Set post to protrude .115” [2.92]

separately with roll pins included)

•ꢀ

Snap-inꢀstyleꢀlatch/ejectorsꢀinꢀeitherꢀshortꢀ

(N3XXXX5XXX) or long (N3XXX-X6XX)

styles, may also be ordered separately, and are

functional and dimensional equivalents to the

-2 and -3 roll pin latches.

Polarizing Keys

N3518

LCP

Black

.02

If ordering latches separately, please use the below chart

Short Latch Long Latch

Latch Style

Color

Black

High Temperature (PPA)

High Temperature (PCT)

N3505-30B

N3505-2B

N3505-31B

N3505-3B

Snap In

Roll Pin

.09

[2.3]

Breakaway Tab

.34 Ref

[8.6]

A

• Selective pin removal (ATA or other compatability)

.15

[3.8]

Note: #2216 B/A Scotchweld can be used to adhere keys.

Mounting Hardware

3341-6

(Must be inserted prior to latch on

vertical headers)

3341-5

(Installed from bottom of board)

.50

[12.7]

.31

[7.9]

Hex Head Bolt, Nut and Washer

Bolt - #2-56 X 1/2”

Panhead Thread Cutting Screw:

#4-24 X 5/16”

Type: USA Std BT, Federal BG

3341-5 & 6

Material - Stainless Steel

TS-2245-F

Sheet 4 of 4

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3

Electronic Solutions Division

Interconnect Solutions

http://www.3Mconnectors.com

3M is a trademark of 3M Company.

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness

is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated

with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order

shall have no force or effect unless expressly agreed upon, in writing, by an authorized ofﬁcer of 3M.

Warranty; Limited Remedy; Limited Liability.

This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES

INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the

warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except

where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of

the legal theory asserted.

3

3M Electronics Solutions Division

6801 River Place Blvd.

Austin, TX 78726-9000

U.S.A.

1-800-225-5373

www.3Mconnectors.com

Please recycle. Printed in USA.

RIA-2217B-E


型号：	D3869-5302AR
厂家：	3M ELECTRONICS
描述：	Board Connector
文件：	总5页 (文件大小：1158K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

D3869-5302AR [3M]

相关型号：

D3869-6002AR

D3869-6202AR

D3869-6302AR

D3889-5202AR

D3889-5302AR

D3889-6002AR

D3889-6202AR

D3889-6302AR

D38920000024

D38920000115

D38999

D38999