HDC-S220-41S1-HM [3M]
Board Connector, 220 Contact(s), 4 Row(s), Female, Right Angle, Solder Terminal, Socket, ROHS COMPLIANT;型号: | HDC-S220-41S1-HM |
厂家: | 3M ELECTRONICS |
描述: | Board Connector, 220 Contact(s), 4 Row(s), Female, Right Angle, Solder Terminal, Socket, ROHS COMPLIANT |
文件: | 总10页 (文件大小:1327K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3M™ HDC Socket
.100” RightAngle, PCB, 3 or 4-Row, Solder Tail or Press-Fit
HDC Series
•ꢀ High density 3-row version, up to 240 contacts single
bay or 366 contacts dual bay
•ꢀ Mates with 3-row single or dual bay plugs and
headers
•ꢀ High density 4-row version, up to 320 contacts single
bay or 488 contacts dual bay
•ꢀ Mates with 4-row single or dual bay plugs and
headers
•ꢀ Low 2 oz. insertion force
•ꢀ See Regulatory InformationAppendix (RIA) for
chemical compliance information
Date Modified: March 25, 2008
TS-1137-B
Sheet 1 of 7
Physical
Insulation:
Material: Glass Filled Thermoplastic (LCP)
Flammability: UL 94V-0
Color: Black
Contact:
Material: CopperAlloy
Plating:
Underplating:
50 μ” [ 1.27 μm ] min. Nickel
WipingArea: See Ordering Information
TerminationArea: See Ordering Information
Part Number and Date Code
Marking:
Electrical
3.0A per contact
Current Rating:
Insulation Resistance:
Withstanding Voltage:
1 x 103 MΩ min. at 500VDC
900V for 1 minute
AC
Environmental
-55°C to +125°C
Temperature Rating:
Maximum 260°C (per J-STD-020C)
1 (per J-STD-020C)
Process Rating:
Moisture Sensitivity Level:
UL File No.: E68080
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M™ HDC Socket
.100” RightAngle, PCB, 3 or 4-Row, Solder Tail or Press-Fit
HDC Series
3-Row Single Bay
O 0.041- 0.049 PLATED-THRU HOLE, SOLDER TAIL
O 0.037-0.043 PLATED-THRU HOLE, PRESS-FIT TAIL
l O .004 M A B
0.100
CONNECTOR FOOTPRINT
-B-
0.100
0.100
0.275
ROW C
ROW B
ROW A
0.445
-A-
0.300
O 0.120 2 Plcs.
l O .002 A B
C
B
Inch
[mm]
Tolerance Unless Noted
A
.00
.000
.0
PIN # 1
±.005
±.01
±.1
Inch
RECOMMENDED P.C.B. HOLE PATTERN
[ ] Dimensions for
Reference only
TS-1137-B
Sheet 2 of 7
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M™ HDC Socket
.100” RightAngle, PCB, 3 or 4-Row, Solder Tail or Press-Fit
HDC Series
Product Table/Dimensions for 3- Row, Single Bay
Contact
Description
A
B
C
D
Quantity
HDC-S045-31XX-XXXX
HDC-S075-31XX-XXXX
HDC-S090-31XX-XXXX
HDC-S096-31XX-XXXX
HDC-S102-31XX-XXXX
HDC-S120-31XX-XXXX
HDC-S135-31XX-XXXX
HDC-S150-31XX-XXXX
HDC-S165-31XX-XXXX
HDC-S180-31XX-XXXX
HDC-S195-31XX-XXXX
HDC-S210-31XX-XXXX
45
2.250
[57.15]
3.250
[82.55]
3.750
[95.25]
3.950
[100.33]
4.150
[105.41]
4.750
[120.65]
5.250
[133.35]
5.750
[146.05]
6.250
1.950
[49.53]
2.950
[74.93]
3.450
[87.63]
3.650
[92.71]
3.850
[97.79]
4.450
[113.03]
4.950
[125.73]
5.450
[138.43]
5.950
1.400
[35.56]
2.400
[60.96]
2.900
[73.66]
3.100
[78.74]
3.300
[83.82]
3.900
[99.06]
4.400
[111.76]
4.900
[124.46]
5.400
1.524
[38.71]
2.524
[64.11]
3.024
[76.81]
3.224
[81.89]
3.424
[86.97]
4.024
[102.21]
4.524
[114.91]
5.024
[127.61]
5.524
75
90
96
102
120
135
150
165
180
195
210
[158.75]
6.750
[171.45]
7.250
[184.15]
7.750
[151.13]
6.450
[163.83]
6.950
[176.53]
7.450
[137.16]
5.900
[149.86]
6.400
[162.56]
6.900
[140.31]
6.024
[153.01]
6.524
[165.71]
7.024
[196.85]
8.250
[209.55]
8.350
[212.09]
8.750
[189.23]
7.950
[201.93]
8.050
[204.47]
8.450
[175.26]
7.400
[187.96]
7.500
[190.50]
7.900
[178.41]
7.524
[191.11]
7.624
[193.65]
8.024
HDC-S225-31XX-XXXX
HDC-S228-31XX-XXXX
HDC-S240-31XX-XXXX
225
228
240
[222.25]
[214.63]
[200.66]
[203.81]
Ordering Information
HDC - SXXX - XXXX - XXXX
Plating Chart
Plating
Suffix
Press-Fit
Terminations
Solder Tail
Terminations
Contact
Quantity
See 3 or 4 Row
Table
Plating composition
Plating
Options:
(See Plating
Chart)
3 μ” [0.08 μm] Min. Au over
7 μ” [0.18 μm] PdNi area 1
100 μ” [2.54 μm] Min. Tin Lead area 4
50 μ” [1.27 μm] Min. Ni all over
(RIA E2 & C2
apply)
(RIA E3 & C2
apply)
TR
Row Quantity
3 = Three Row
4 = Four Row
30 μ” [0.76 μm] Min. Au Area 1
100 μ” [2.54 μm] Min. Tin Lead Tail Area 4
50 μ” [1.27 μm] Min. Ni all over
(RIA E2 & C2
apply)
(RIA E3 & C2
apply)
TG30
3 μ” [0.08 μm] Min Au on Area 1
7 μ” [0.18 μm] PdNi on area 1
100 μ” [2.54 μm] Min. Whisker Mitigating
Matte Tin on Area 4
(RIA E1 & C1
apply)
(RIA E1 & C1
apply)
HM
KR
50 μ” [1.27 μm] Min. Ni all over
Insulator Options
30 μ” [0.76 μm] Min. Au on Area 1
100 μ” [5.08 μm] Min. Whisker Mitigating
Matte Tin on Area 4
(RIA E1 & C1
apply)
(RIA E1 & C1
apply)
1 = Single bay insulator
2 = Dual bay insulator
with center guide hole
50 μ” [1.27 μm] Min. Ni all over
Termination Style / Lead length - Dim. F
P1 - Press-fit Right Angle / 0.157″ (4.00)
S1 - Solder Right Angle / 0.110″ (2.79)
S2 - Solder Tail / 0.160″ (4.06)
TS-1137-B
Sheet 3 of 7
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3M.com/interconnects/
3M™ HDC Socket
.100” RightAngle, PCB, 3 or 4-Row, Solder Tail or Press-Fit
HDC Series
3-Row Dual Body
Product Table/Dimensions for 3 Row, Dual Bay
Pin
Quantity
Description
A
B
C
D
E
8.650
8.350
7.800
7.924
3.700
HDC-S228-32XX-XXXX
HDC-S240-32XX-XXXX
HDC-S258-32XX-XXXX
HDC-S276-32XX-XXXX
HDC-S294-32XX-XXXX
HDC-S312-32XX-XXXX
HDC-S330-32XX-XXXX
HDC-S348-32XX-XXXX
HDC-S366-32XX-XXXX
228
[219.71]
[212.09]
[198.12]
[201.93]
[93.98]
9.050
8.750
8.200
8.324
3.900
240
258
276
294
312
330
348
366
[229.87]
[222.25]
[208.28]
[212.09]
[99.06]
9.650
9.350
8.800
8.924
4.200
[245.11]
[237.49]
[223.52]
[227.33]
[106.68]
10.250
9.950
9.400
9.524
4.500
[260.35]
[252.73]
[238.76]
[242.57]
[114.30]
10.850
10.550
10.000
10.124
4.800
[275.59]
[267.97]
[254.00]
[257.81]
[121.92
11.450
11.150
10.600
10.724
5.100
[290.83]
[283.21]
[269.24]
[273.05]
[129.54]
12.050
11.750
11.200
11.324
5.400
[306.07]
[298.45]
[284.48]
[288.29]
[137.16]
12.650
12.350
11.800
11.924
5.700
[321.31]
[313.69]
[299.72]
[303.53]
[144.78]
13.250
12.950
12.400
12.524
6.000
[336.55]
[328.93]
[314.96]
[318.77]
[152.40]
TS-1137-B
Sheet 4 of 7
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3M.com/interconnects/
3M™ HDC Socket
.100” RightAngle, PCB, 3 or 4-Row, Solder Tail or Press-Fit
HDC Series
4-Row Single Bay
TS-1137-B
Sheet 5 of 7
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M™ HDC Socket
.100” RightAngle, PCB, 3 or 4-Row, Solder Tail or Press-Fit
HDC Series
Product Table/Dimensions for 4-Row Socket Single Bay
Pin
Description
A
B
C
D
Quantity
2.250
[57.15]
1.950
[49.53]
1.400
[49.53]
1.524
[38.71]
HDC-S060-41XX-XXXX
HDC-S076-41XX-XXXX
HDC-S080-41XX-XXXX
HDC-S100-41XX-XXXX
HDC-S120-41XX-XXXX
HDC-S128-41XX-XXXX
HDC-S140-41XX-XXXX
HDC-S160-41XX-XXXX
HDC-S168-41XX-XXXX
HDC-S180-41XX-XXXX
HDC-S200-41XX-XXXX
HDC-S216-41XX-XXXX
HDC-S220-41XX-XXXX
HDC-S240-41XX-XXXX
HDC-S260-41XX-XXXX
HDC-S280-41XX-XXXX
HDC-S300-41XX-XXXX
HDC-S320-41XX-XXXX
60
2.650
[67.31]
2.350
[59.69]
1.800
[45.72]
1.924
[48.87]
76
2.750
[69.85]
2.450
[62.23]
1.900
[48.26]
2.024
[51.41]
80
3.250
[82.55]
2.950
[74.93]
2.400
[60.96]
2.524
[64.11]
100
120
128
140
160
168
180
200
216
220
240
260
280
300
320
3.750
[95.25]
3.450
[87.63]
2.900
[73.66]
3.024
[76.81]
3.950
[100.33]
3.650
[92.71]
3.100
[78.74]
3.224
[81.89]
4.250
[107.95]
3.950
[100.33]
3.400
[86.36]
3.524
[89.51]
4.750
[120.65]
4.450
[113.03]
3.900
[99.06]
4.024
[102.21]
4.950
[125.73]
4.650
[118.11]
4.100
[104.14]
4.224
[107.29]
5.250
[133.35]
4.950
[125.73]
4.400
[111.76]
4.524
[114.91]
5.750
[146.05]
5.450
[138.43]
4.900
[124.46]
5.024
[127.61]
6.150
[156.21]
5.850
[148.59]
5.300
[134.62]
5.424
[137.77]
6.250
[158.75]
5.950
[151.13]
5.400
[137.16]
5.524
[140.31]
6.750
[171.45]
6.450
[163.83]
5.900
[149.86]
6.024
[153.01]
7.250
[184.15]
6.950
[176.53]
6.400
[162.56]
6.524
[165.71]
7.750
[196.85]
7.450
[189.23]
6.900
[175.26]
7.024
[178.41]
8.250
[209.55]
7.950
[209.55]
7.400
[187.96]
7.524
[191.11]
8.750
[222.25]
8.450
[214.63]
7.900
[200.66]
8.024
[203.81]
Product Table/Dimensions for 4-Row Socket, Dual Bay
Description
Pin Quantity
A
B
C
D
E
9.050
[229.87]
8.750
[222.25]
8.200
[208.28]
8.324
[211.43]
3.900
[99.06]
HDC-S320-42XX-XXXX
320
9.650
[245.11]
9.350
[237.49]
8.800
[237.49]
8.924
[226.67]
4.200
[106.68]
HDC-S344-42XX-XXXX
HDC-S352-42XX-XXXX
HDC-S360-42XX-XXXX
HDC-S368-42XX-XXXX
HDC-S392-42XX-XXXX
HDC-S416-42XX-XXXX
HDC-S440-42XX-XXXX
HDC-S464-42XX-XXXX
HDC-s488-42XX-XXXX
344
352
360
368
392
416
440
464
488
9.850
[250.19]
9.550
[242.57]
9.000
[228.60]
9.124
[231.75]
4.300
[109.22]
10.050
[255.27]
9.750
[247.65]
9.200
[233.68]
9.324
[236.83]
4.400
[111.76]
10.250
[260.35]
9.950
[252.73]
9.400
[238.76]
9.524
[241.91]
4.500
[114.30]
10.850
[275.59]
10.550
[267.97]
10.000
[254.00]
10.124
[257.15]
4.800
[121.92]
11.450
[290.83]
11.150
[283.21]
10.600
[269.24]
10.724
[272.39]
5.100
[129.54]
12.050
[306.07]
11.750
[298.45]
11.200
[284.48]
11.324
[287.63]
5.400
[137.16]
12.650
[321.31]
12.350
[313.69]
11.800
[299.72]
11.924
[302.87]
5.700
[144.78]
13.250
[336.55]
12.950
[328.93]
12.400
[314.96]
12.524
[318.11]
6.000
[152.40]
TS-1137-B
Sheet 6 of 7
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3M.com/interconnects/
3M™ HDC Socket
.100” RightAngle, PCB, 3 or 4-Row, Solder Tail or Press-Fit
HDC Series
A
.820
.605
15.37
20.83
.105
3X O
2.67
.210
5.33
.275
.020
6.98
0.51mm
.158
4.01
.105
2.67
PIN # 1
.400
10.16
.434
.276
7.01
O
11.02
.204
5.18
ROW D
ROW C
ROW B
ROW A
.094
.054
1.37
A
E
8
6
2
H
F
B
D
7
G
3
C
4
5
F
.460
11.68
0.080
2.03
.126
3.20
0.048 X .014 TYP.
[1.2 X .36]
.014
.36
.286
7.26
.128
3.25
PRESS-FIT TAIL
SOLDER TAIL
0.100
.100
3X
TYP.
2.54
2.54
.318
8.08
0.024 X .014 TYP.
[.61 X .36]
.179 - .182 ACROSS FLATS X .080 `
[4.54 - 4.62] [ 2.03]
C
D
B
O .041 - .049 PLATED-THRU HOLE, SOLDER TAIL
O .037-.043 PLATED-THRU HOLE, PRESS-FIT
CONNECTOR OUTLINE
.100
.200
l O .004 M
A B
.275
.400
-B-
.200
.100
ROW D
ROW C
-A-
0.545
ROW B
ROW A
.300
.100
3X O .120
l O .002 A
C
B
B
A
RECOMMENDED P.C.B. HOLE PATTERN
TS-1137-B
Sheet 7 of 7
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3M.com/interconnects/
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/717/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below.
RIA-2217A-D
Appendix E5: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under
Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means
that the product or part does not contain any of the following substances in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
RIA-2217A-D
Appendix C3: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty
period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where
prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the
legal theory asserted.
3M Electronic Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3m.com/interconnects
Please recycle. Printed in USA.
© 3M 2008. All rights reserved.
RIA-2217A-D
3M is a trademark of 3M Company.
相关型号:
HDC-S220-41S1-KR
220 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER, SOCKET, ROHS COMPLIANT
3M
HDC-S220-41S2-HM
220 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER, SOCKET, ROHS COMPLIANT
3M
HDC-S220-41S2-KR
220 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER, SOCKET, ROHS COMPLIANT
3M
HDC-S220-41S2-TG30
Board Connector, 220 Contact(s), 4 Row(s), Female, Right Angle, 0.1 inch Pitch, Solder Terminal, Hole .099-.111, Black Insulator, Socket,
3M
HDC-S220-41S3-TG30
Board Connector, 220 Contact(s), 4 Row(s), Female, Right Angle, 0.1 inch Pitch, Solder Terminal, Hole .099-.111, Black Insulator, Plug
3M
HDC-S220-41S3-TR
HEADER CONNECTOR,PCB MNT,PLUG,220 CONTACTS,SKT,0.1 PITCH,PC TAIL TERMINAL,HOLE .099-.111,BLACK
3M
HDC-S225-31P1-KR
225 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, PRESS FIT, SOCKET, ROHS COMPLIANT
3M
HDC-S225-31P1-TG30
225 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, PRESS FIT, SOCKET
3M
HDC-S225-31S1-KR
225 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER, SOCKET, ROHS COMPLIANT
3M
HDC-S228-31P1-HM
228 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, PRESS FIT, SOCKET, ROHS COMPLIANT
3M
©2020 ICPDF网 联系我们和版权申明