HSHM-S088FL4-8AP1-TR40B [3M]

88 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, PRESS FIT, SOCKET;
HSHM-S088FL4-8AP1-TR40B
型号: HSHM-S088FL4-8AP1-TR40B
厂家: 3M ELECTRONICS    3M ELECTRONICS
描述:

88 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, PRESS FIT, SOCKET

PC 连接器
文件: 总4页 (文件大小:512K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
3MMetPakHSHM Press-Fit Socket  
2 mm Type FL, 88 Signal Contacts, 8 Rows, RightAngle  
HSHM Series  
• Up to 5 Gb/s data rates  
• Low crosstalk at high frequencies  
• 50/100 Ω (single-ended /differential) impedance  
• Modular/scalable format IEC 61076-4-101  
• 101 mated lines per linear inch  
• Dual beam contact construction for high reliability  
• End-to-end stackable with 8 row 3MMetPakHM  
and HSHM sockets  
• See the Regulatory InformationAppendix (RIA) in  
the “RoHS compliance” section of  
www.3mconnector.com for compliance information  
Date Modified: November 17, 2010  
TS-2004-B  
Sheet 1 of 3  
Physical  
Insulation Material: High Temperature Thermoplastic (LCP)  
Flammability: UL 94V-0  
Contact Material: CopperAlloy  
Plating: See Ordering Information  
Performance  
Mechanical:  
Normal Force (Nominal): 0.57 N [58 g] Signal, 0.74 N [75 g] Shield  
Engagement Force (Nominal): 0.32 N [33 g] Signal, 0.22 N [22 g] Shield  
Separation Force (Nominal): 0.20 N [20 g] Signal, 0.20 N [20 g] Shield  
Wipe (Nominal, Shortest Contact): 2.67 mm [0.105 in] Signal, 1.57 mm [0.062 in] Shield  
Mate/Unmate Cycles: 250  
Application: This module is not suitable for stand-alone use. (Refer to IEC-61076-4-101)  
Electrical:  
Data Rate: 5 Gb/s  
Characteristic Impedance:  
50 Ω Single-ended, 100 Ω Differential  
Current Rating (Fully Loaded): 1A @ 70° C Signal  
Insulation Resistance:  
104 MΩ @ 100VDC  
WithstandingVoltage: 750VRMS  
Environmental  
Temperature Rating:  
-55° C to 125° C  
UL File No.: E68080  
MetPak is a trademark of 3M Company.  
3M is a trademark of 3M Company.  
For technical, sales or ordering information call  
800-225-5373  
3
Electronic Solutions Division  
Interconnect Solutions  
http://www.3Mconnector.com  
3MMetPakHSHM Press-Fit Socket  
2 mm Type FL, 88 Signal Contacts, 8 Rows, RightAngle  
HSHM Series  
HSHM-SXXXXX-8AP1-XXXXX  
REV X  
XXYY  
25.00  
.984  
20.00  
.787  
22.40  
.882  
2.00  
.079  
I
H
G
F
E
D
C
B
A
Z
17.40  
.685  
16.95  
.667  
11 10  
9
8
7
6
5
4
3
2
1
2.00  
.079  
2.00  
.079  
0.75  
.030  
3.30  
.130  
2.80  
.110  
8.80  
.346  
2.00  
.079  
10.70  
.421  
18.00  
.709  
mm  
(Inch)  
Tolerance Unless Noted  
0
3
0.0 0.00  
0.3 0.13  
mm  
[ ] Dimensions for  
Reference Only  
Ordering Information  
HSHM-S088FLX - 8AP1- XXXXX  
Plating μm [ μ” ]:  
High Speed Option:  
TG30 =  
TG30L =  
TG50 =  
0.76 [30] Min.Au Contact Area  
2.54 [100] Min. SnPb Terminal Area (RIA C2 & E2 apply)  
1.27 [50] Min. Ni All over  
1 = Row differential applications  
4 = Coaxial and column differential applications  
Standard Option  
0.76 [30] Min.Au Contact Area, Lubricated  
2.54 [100] Min. SnPb Terminal Area (RIA C2 & E2 apply)  
1.27 [50] Min. Ni All over  
Typically higher make order quantities as compared to TG30.  
1.27 [50] Min.Au Contact Area, Lubricated  
2.54 [100] Min. SnPb Terminal Area (RIA C2 & E2 apply)  
1.27 [50] Min. Ni All over  
Non-Standard Option (Available with longer lead times and  
higher make order quantities, MOQ)  
TS-2004-B  
Sheet 2 of 3  
3M is a trademark of 3M Company.  
For technical, sales or ordering information call  
800-225-5373  
3
Electronic Solutions Division  
Interconnect Solutions  
http://www.3Mconnector.com  
3MMetPakHSHM Press-Fit Socket  
2 mm Type FL, 88 Signal Contacts, 8 Rows, RightAngle  
HSHM Series  
48.00  
1.00  
2.00  
1.50  
B
0.75  
I, Z  
H
G
F
E
10.50  
D
C
B
A
C
25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10  
9
8
7
6
5
4
3
2
1
1.50  
DIM D  
Plated thru hole  
M
Ø 0.10  
A B C  
A
Recommended PCB hole mounting pattern for  
coaxial, column differential, and stripline  
applications  
I, Z  
H
G
F
E
D
C
B
A
25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10  
9
8
7
6
5
4
3
2
1
Recommended PCB hole mounting pattern for row  
differential applications  
(same geometry as above without the ground vias)  
Hole Plating Table mm [in.]  
Finsihed Hole Dia. “D”  
Cu.Thickness  
SnPb Thickness  
0.008 -0.018 [.0003 - .0007]  
Drilled Hole Dia.  
0.584 - 0.625 [.0230 - .0246]  
0.457 - 0.559 [.0180 - .0220]  
0.025 - 0.045 [.0010 - .0018]  
TS-2004-B  
Sheet 3 of 3  
3M is a trademark of 3M Company.  
3
For technical, sales or ordering information call  
Electronic Solutions Division  
Interconnect Solutions  
800-225-5373  
http://www.3Mconnector.com  
Important Notice  
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness  
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated  
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order  
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.  
Warranty; Limited Remedy; Limited Liability.  
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES  
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the  
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except  
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of  
the legal theory asserted.  
3M Electronics Solutions Division  
6801 River Place Blvd.  
Austin, TX 78726-9000  
U.S.A.  
1-800-225-5373  
www.3Mconnector.com  
Please recycle. Printed in USA.  
© 3M 2010. All rights reserved.  
RIA-2217B-E  
3M is a trademark of 3M Company.  

相关型号:

HSHM-S088FL7-8AP1-TG30

88 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, PRESS FIT, SOCKET
3M

HSHM-S110APWR1-5AP1-TG50

110 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, PRESS FIT, SOCKET
3M

HSHM-S110APWR3-5AP1-TG50

TWO PART BOARD CONNECTOR
3M

HSHM-S110APWR4-5AP1-TG30

110 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, PRESS FIT, SOCKET
3M

HSHM-S110APWR4-5AP1-TG30L

110 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, PRESS FIT, SOCKET
3M

HSHM-S176DPWR4-8AP1-TG30L

180 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, PRESS FIT, SOCKET, ROHS COMPLIANT
3M

HSHM-S200DE4-8AP1-TR40B

200 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, PRESS FIT, SOCKET
3M

HSHM-S200DE7-8AP1-TR40B

200 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, PRESS FIT, SOCKET
3M

HSHM-S200E1--8PAP1TR40B

200 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, PRESS FIT, SOCKET
3M

HSHM-S200E1-8AP1-TG30

Board Connector, 200 Contact(s), 8 Row(s), Female, Right Angle, 0.079 inch Pitch, Press Fit Terminal, Locking, Plug,
3M

HSHM-S200E1-8AP1-TG30L

TWO PART BOARD CONNECTOR
3M

HSHM-S200E4--8PAP1TR40B

200 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, PRESS FIT, SOCKET
3M