MNG14-250DFI [3M]
BRASS, TIN FINISH, PUSH-ON TERMINAL;型号: | MNG14-250DFI |
厂家: | 3M ELECTRONICS |
描述: | BRASS, TIN FINISH, PUSH-ON TERMINAL 端子和端子排 |
文件: | 总2页 (文件大小:42K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Scotchlok™ Terminals
W´
MNG18-250DFI, MNG14-250DFI
Female Disconnect, Nylon Fully Insulated
with Insulation Grip
W
D
L
Data Sheet
Mates with
Wire
Range
(AWG)
Male Tab
Width (W´ )
x Thickness
Maximum
Barrel Insulation
Product
Number
Barrel
Length
L
W
D
I.D.
Diameter
MNG18-250DFI
MNG14-250DFI
22-18
16-14
0.250 x 0.032
0.250 x 0.032
0.87 0.37 0.23
0.87 0.37 0.23
0.25
0.25
0.080
0.080
0.145
0.145
Installation Information
ꢀWARNING
Turn power off before installing or removing terminal. All electrical
work should be done according to appropriate electrical codes.
CANADIAN STANDARDS
ASSOCIATION
UNDERWRITERS
LABORATORIES
STANDARD NO. 22.2
NO. 0, 65
STANDARD NO. UL 486C
3M FILE NO. E70512
3M FILE NO. LR22190
UL Listed and CSA Certified for use on stranded copper
(AWG) wire only.
Strip away the end 3/8 inch of wire insulation.
Make the crimp in the proper station of a recommended
3M crimp tool: TH-440, TH-450 (scissor style), or
TR-482, TR-490 (ratchet style) hand tools.
Specifications
Wire Size:
Barrel Seam:
See Table Above
Butted, with
Insulation Grip
600V Building Wire
1000 V Signs or
Lighting Fixtures
(Luminaires)
221˚F (105˚C)
Same as Wire
Nylon
Maximum Voltage Rating:
Barrel Crimp (Electrical)
Insulation Crimp (Mechanical)
Maximum Operating Temp:
Maximum Current:
Insulator Material:
Terminal Material:
Insulation Grip Material:
Plating:
Brass
Suitable for factory installation on steel or brass tabs, UL
and CSA.
Brass
Tin
Suitable for field application on brass tabs, strain relief is
required.
Engineering Specification
Crimp-Type Female Disconnects shall, electrically and The Nylon Fully Insulated Female Disconnect, with
mechanically, connect permanently to a prestripped
end of a stranded copper wire: and have a tongue
insulation grip, shall be tin plated 0.020˝ thick brass
with a tongue for gripping a 0.250˝ x 0.032˝ Male Tab
portion with fingers which grip a Male Disconnect in a per ANSI/NEMA CD-2 and a 0.25˝ long barrel with a
separable, reusable manner, forming a Quick Connect
Wiring Termination.
tin plated brass funnel entry insulation grip, covered
by a molded nylon sleeve, which extends to cover the
tongue, color coded and sized for a specified (AWG)
wire range (22-18, 16-14).
The connector line shall offer tongue variations (sized
to 0.250˝ x 0.032˝ or 0.187˝ x 0.020˝ per ANSI/NEMA
CD-2) and construction (non-insulated, vinyl insulated Insulated connectors shall be UL Listed and CSA
and nylon fully insulated insulated, etc.). The Female
Disconnects shall have regulatory agency coverage
(UL Listing, CSA Certification). The tongue portion
shall be marked with the wire range and
Certified for 600 V building wire: 1000V signs or
lighting fixtures (luminaires) and temperature rated
221˚F (105˚C) maximum.
Female Disconnects shall be suitable for field or
factory wiring, with a UL Recognized strain relief
required.
manufacturer’s symbol (ꢀ).
3M and Scotchlok are trademarks of 3M Company.
is a trademark of Underwriters Laboratories.
is a trademark of Canadian Standards Association.
IMPORTANT NOTICE
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability
associated with such use.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,
your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect,
special, incidental or consequential regardless of the legal theory asserted.
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
http://www.3M.com/elpd
Litho in USA.
© 3M 2003 78-8125-9931-0-B
相关型号:
©2020 ICPDF网 联系我们和版权申明