MNG14BCM [3M]
COPPER ALLOY, TIN FINISH, WIRE TERMINAL;
| 型号： | MNG14BCM |
| 厂家： | 
3M ELECTRONICS |
| 描述： | COPPER ALLOY, TIN FINISH, WIRE TERMINAL 端子和端子排 |
| 文件： | 总2页 (文件大小：26K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Scotchlok™ Terminals
L
MNG18BCM, MNG14BCM, MNG10BCM
Butt Connector, Nylon Insulated with
Insulation Grip, Moisture Resistant
Data Sheet
Masimum
Insulation
Diameter
Product
Number
Wire Range
(AWG)
Barrel
Length
Barrel
I.D.
L
Thickness
0.030
MNG18BCM
MNG14BCM
MNG10BCM
22-18
16-14
12-10
1.00
1.00
1.15
0.25
0.25
0.25
0.070
0.090
0.135
0.145
0.170
0.250
0.030
0.040
Installation Information
ꢀWARNING
CANADIAN STANDARDS
ASSOCIATION
Turn power off before installing or removing terminal. All electrical
work should be done according to appropriate electrical codes.
UNDERWRITERS
LABORATORIES
STANDARD NO. 22.2
NO. 0, 65
STANDARD NO. UL 486C
3M FILE NO. E23438
UL Listed and CSA Certified for use on stranded copper
wire only (AWG).
3M FILE NO. LR22190
Strip away the end 3/8 inch of wire insulation.
Specifications
Make the crimp in the proper station of a recommended
3M crimp tool: TH-440, TH-450 (scissor style) or
TR-482, TR-490 (ratchet style) hand tools.
Wire Size:
Barrel Seam:
See Table Above
Butted with Insulation
Grip
600 V Building Wire or
1000 Volts Signs or
Fixtures (Luminaires)
221˚F (105˚C)
Same as Wire
ETP Copper
Tin
Maximum Voltage Rating:
Maximum Operating Temp:
Maximum Current:
Terminal Material:
Terminal Plating:
Sealant:
Barrel Crimp (Electrical)
Insulation Grip Crimp
(required for sealant integrity)
Petroleum based
corrosion preventative
hydrophobic
compound, maintaining
a stable, grease-like
consistency over a wide
temperature range.
Engineering Specification
Crimp-type terminals shall, electrically and mechanically, The nylon insulated, moisture resistant butt connector
connect to the pre-stripped end of two stranded copper
wires.
shall be tin-plated, annealed copper, having a double-
length, round sealant filled barrel with a center stop and
tin plated brass insulation grips at each end, all covered
by a close fitting nylon tubing, color coded and sized for
The connector line shall offer barrel variations in wire
(AWG) size (22-18, 16-14, 12-10) and construction (non- a specified (AWG) wire range (22-18, 16-14, 12-10).
insulated brazed seam, vinyl insulated butted seam, nylon
insulated seamless, etc...). The connector line shall have
regulatory agency coverage (UL Listing, CSA
Certification). The connectors shall be marked with the
wire range and manufacturer’s symbol (ꢀ).
Insulated connectors shall be UL Listed for 600 volts
maximum, building wire: 1000 volts maximum, signs
and lighting fixtures (luminaires) and temperature rated
221˚F (105˚C) maximum.
Caution: Avoid eye and prolonged or repeated skin
contact.
Suggested First Aid: In case of eye contact, flush eyes
with large amounts of water for at least ten minutes and
call a physician.
3M and Scotchlok are trademarks of 3M.
is a trademark of Underwriters Laboratories.
is a trademark of Canadian Standards Association.
IMPORTANT NOTICE
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability
associated with such use.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,
your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect,
special, incidental or consequential regardless of the legal theory asserted.
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
http://www.3M.com/elpd
Litho in USA.
© 3M 2002 78-8125-9667-0-A
相关型号：
©2020 ICPDF网 联系我们和版权申明