概述
规格参数
数据手册MP2-S060-51MM2-C-FJ 概述
TWO PART BOARD CONNECTOR 集管和边缘连接器
MP2-S060-51MM2-C-FJ 规格参数
| 生命周期： | Active | Reach Compliance Code： | unknown |
| ECCN代码： | EAR99 | HTS代码： | 8536.69.40.40 |
| 风险等级： | 5.67 | 连接器类型： | BOARD CONNECTOR |
MP2-S060-51MM2-C-FJ 数据手册
通过下载MP2-S060-51MM2-C-FJ数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载3M™ MetPak™ 2-FB Socket
2 mm 4/5-Row, Solder Tail or Press-Fit With Tail Cover, RightAngle
MP2 Series
• End-to-end stackable
• Offset dual-beam contact minimizes insertion force
• Expanded pin counts
• Protective Push-Cap
• Monoblockable
• Press or heat stake peg
• 12 mm modular units
• Meets global IEC 61076-4-104 Futurebus+® standard
• See the Regulatory InformationAppendix (RIA)
in the “RoHS compliance” section of
www.3Mconnector.com for compliance
information (RIAE1 & C1 apply)
Date Modified: May12, 2010
TS-1115-C
Sheet 1 of 4
Physical
Insulation:
Material: High Temp LCP
Flammability: UL 94V-0
Color: Beige
Contact:
Material:
CopperAlloy
Plating:
Underplating: 50 μ” (1.27 μm) Nickel
WipingArea: See Ordering Information
Solder Tails: See Ordering Information
Electrical
Signal: 1.5A-All contacts simultaneously
Current Rating:
103 MΩ
Insulation Resistance:
Withstanding Voltage:
1,000 V
AC
Environmental
-55° C to 125° C
Temperature Rating:
260°C (Profile per J-STD-020C)
1 (per J-STD-020C)
Process Temperature Rating:
Moisture Sensitivity Level:
MetPak is a trademark of 3M Company.
Futurebus+ is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc. (IEEE)
UL File No.: E68080
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M™ MetPak™ 2-FB Socket
2 mm 4/5-Row, Solder Tail or Press-Fit With Tail Cover, RightAngle
MP2 Series
21.0
.83
12.45
.490
"A"
1.00
.039
9.30
.366
11.80
.465
"C" TAIL LENGTH
13.50
.531
X
1
2
2.00
6.00
.236
.079
"D" POST LENGTH
TYP.
2.00
.079
TYP.
"B"
4 ROW PRODUCT
23.0
.91
12.45
.490
ROW
mm
(Inch)
E
11.30
.445
D
C
B
Tolerance Unless Noted
13.80
.543
0
3
0.0
0.3
0.00
0.13
FOR SPECIAL MONOBLOCKS
CONTACT 3M SALES
mm
A
( ) Dimensions used for
Reference Only
REPRESENTATIVE
1.00
.039
5 ROW PRODUCT
8.00
.315
Note:
1. Refer to IEC 61076-4-104 Futurebus+® global standard.
2. “Press Fit” describes a contact tail having a compliant section designed to make a reliable electrical connection with a plated
through-hole (PTH) in a printed circuit board, typically a “back plane.”
Ordering Information
MP2 - SXXX - X1XX - X - XXXX
Plating Options:
(See Table 3)
Contact Count
(See Table 1)
C = Capped Solder Tail
Blank = Press-Fit
Termination Style
Tail Length
Rows
M = Solder Tail (Press Peg)
(press peg requiring arbor press for PCB assembly)
(Contact 3M Sales Rep)
(See Table 2)
4 = 4 Rows
5 = 5 Rows
P = Press Fit (w/ Tail Cover)
TS-1115-C
Sheet 2 of 4
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3Mconnector.com
3M™ MetPak™ 2-FB Socket
2 mm 4/5-Row, Solder Tail or Press-Fit With Tail Cover, RightAngle
MP2 Series
Table 1 - Connector & Row Lengths
Pin
Count
Dim “A”
mm (Inch)
Dim “B”
mm (Inch)
Block
Count
Rows
024
048
072
096
120
144
168
192
030
060
090
120
150
180
210
240
11.95
[0.471]
[0.943]
[1.415]
[1.889]
[2.36]
10.00 [0.394]
22.00 [0.866]
34.00 [1.339]
46.00 [1.811]
58.00 [2.283]
70.00 [2.756]
82.00 [3.228]
94.00 [3.701]
10.00 [0.394]
22.00 [0.866]
34.00 [1.339]
46.00 [1.811]
58.00 [2.283]
70.00 [2.756]
82.00 [3.228]
94.00 [3.701]
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
23.95
35.95
47.95
59.95
71.95
83.95
95.95
11.95
23.95
35.95
47.95
59.95
71.95
83.95
95.95
[2.833]
[3.305]
[3.778]
[0.471]
[0.943]
[1.415]
[1.888]
[2.361]
[2.833]
[3.305]
[3.778]
Table 2 - Tail & Post Lengths
Contact-to-PC
Board Tail Termina-
tion Option No.
Dim “C”
Dim. “D”
Solder
M1
Press-Fit*
2.72 [0.107]
3.53 [0.139]
3.57 [0.141]
3.57 [0.141]
M2
P1
*Compliant-Pin Tail
Table 3 - Plating
Plating Suffix
TG30
Press-Fit Tails*
Solder Tails
Plating Composition
(RIA E2 & C2 apply)
(RIA E3 & C2 apply)
0.76 μm [30 μ”] Min. Au Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
TR30
(RIA E2 & C2 apply)
(RIA E3 & C2 apply)
0.08 μm [3 μ”] Min. Au Contact Area
0.67 μm [27 μ”] Min. PdNi Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
FJ
KR
LR
(RIA E1 & C1 apply)
(RIA E1 & C1 apply)
(RIA E1 & C1 apply)
(RIA E1 & C1 apply)
(RIA E1 & C1 apply)
(RIA E1 & C1 apply)
0.25 μm [10 μ”] Min. Au Contact Area
2.54 μm [100 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
0.76 μm [30 μ”] Min. Au Contact Area
2.54 μm [100 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
0.08 μm [3 μ”] Min. Au Contact Area
0.67 μm [27 μ”] Min. PdNi Contact Area
2.54 μm [100 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
*Compliant-Pin Tail
TS-1115-C
Sheet 3 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M™ MetPak™ 2-FB Socket
2 mm 4/5-Row, Solder Tail or Press-Fit With Tail Cover, RightAngle
MP2 Series
6.00
.236
2.00
3X
.079
THESE HOLES CONSTITUTE MODULAR
REPEATING PATTERN
4.00
.157
2.00
.079
TYP.
1.00
.039
A1
4.00
.157
12.00
.472
"B"
+.05
2.05
-.00
0.10
Ø
Ø
+.002
-.000
.081
UNPLATED THROUGH-HOLE
+.10
2.00
.079
4X
1.50
.059
-.00
“D” PLATEDTHROUGH-HOLE
Ø 0.10
Ø 0.10
Ø
+.004
-.000
8.00
.315
3.00
.118
UNPLATED THROUGH-HOLE
RECOMMENDED 4 ROW PCB HOLE
MOUNTING PATTERN
RECOMMENDED 5 ROW PCB HOLE
MOUNTING PATTERN
Table 4 -- HOLE PLATING For TG30 and TR30 FINISHES ONLY
HOLE
“D”
Finished Dia.
mm [in]
Cu Thickness
mm [in]
SnPb Thickness
microns [μ”]
Drilled Hole Dia.
mm [in]
0.65-0.80 [.0256-.0315]
0.025 [.001] min
15 [600] max
0.81-0.86 [.0319-.0339]
Table 5 -- HOLE PLATING For KR and LR FINISHES ONLY
HOLE Finished Dia. Cu Thickness Immersion Matte Sn Electrolitic Au
OSP ENTEK
Thickness
microns [μ”]
Drilled Hole Dia.
mm [in]
mm [in]
mm [in]
Thickness
Thickness
microns [μ”]
microns [μ”]
“D”
0.700-0.800
[.0276-.0315]
0.025-0.045
[0.001-0.002]
0.5 - 2.5
[20 - 100]
0.1 - 0.5
[4 - 20]
0.2 - 0.5
[8 - 20]
0.830-0.860 [.0330-.0340] or
0.85mm [ #66 ] TWIST DRILL
TS-1115-C
Sheet 4 of 4
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3Mconnector.com
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnector.com
Please recycle. Printed in USA.
© 3M 2010. All rights reserved.
RIA-2217B-E
3M is a trademark of 3M Company.
MP2-S060-51MM2-C-FJ 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| MP2-S060-51MM2-C-KR | 3M | Board Connector | 获取价格 |
|
| MP2-S060-51PP1-FJ | 3M | TWO PART BOARD CONNECTOR | 获取价格 |
|
| MP2-S060-51PP1-LR | 3M | Board Connector | 获取价格 |
|
| MP2-S060-51PP1-TR30 | 3M | Board Connector | 获取价格 |
|
| MP2-S060-51S1-TR30 | 3M | HEADER CONNECTOR,PCB MNT,PLUG,60 CONTACTS,SKT,0.079 PITCH,R ANGLE PC TAIL TERMINAL | 获取价格 |
|
| MP2-S060-51S2-TR30 | 3M | HEADER CONNECTOR,PCB MNT,PLUG,60 CONTACTS,SKT,0.079 PITCH,R ANGLE PC TAIL TERMINAL | 获取价格 |
|
| MP2-S060G-51M1-C-FJ | 3M | Board Connector, 60 Contact(s), 5 Row(s), Female, Right Angle, Solder Terminal, Socket, ROHS COMPLIANT | 获取价格 |
|
| MP2-S060G-51M1-C-KR | 3M | 60 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER, SOCKET, ROHS COMPLIANT | 获取价格 |
|
| MP2-S060G-51M1-C-LR | 3M | 60 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER, SOCKET, ROHS COMPLIANT | 获取价格 |
|
| MP2-S060G-51M1-C-RF | 3M | Board Connector, 60 Contact(s), 5 Row(s), Female, Right Angle, Solder Terminal, Socket, ROHS COMPLIANT | 获取价格 |
|
MP2-S060-51MM2-C-FJ 相关文章
Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
- 2024-09-20
- 5
Bourns 精密环境传感器产品选型手册(英文版)
- 2024-09-20
- 8
Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
- 2024-09-20
- 8
Bourns GMOV 混合过压保护组件产品选型手册(英文版)
- 2024-09-20
- 6
