MTV14-187 [3M]
COPPER ALLOY, TIN FINISH, TAB TERMINAL;型号: | MTV14-187 |
厂家: | 3M ELECTRONICS |
描述: | COPPER ALLOY, TIN FINISH, TAB TERMINAL 端子和端子排 电视 |
文件: | 总2页 (文件大小:18K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Highland™ Terminals
L
MTV14-187, MTV18-187
Male Disconnect, Vinyl Insulated, Butted Seam
Data Sheet
Wire
Range
(AWG)
Maximum
Insulation
Diameter
Product
Number
Mates with Male Tab
Width (W' ) x Thickness
Barrel
Length
Barrel
I.D.
L
MTV14-187
MTV18-187
16-14
22-18
0.187 x 0.020
0.187 x 0.020
0.85
0.85
0.24
0.24
0.080
0.080
0.145
0.145
Installation Information
ꢀWARNING
Turn power off before installing or removing terminal. All electrical
work should be done according to appropriate electrical codes.
CANADIAN STANDARDS
ASSOCIATION
UNDERWRITERS
LABORATORIES
STANDARD NO. C22.2
NO. 153
STANDARD NO. UL 310
3M FILE NO. E70512
3M FILE NO. LR22190
UL Listed and CSA Certified for use on stranded copper
(AWG) wire only.
Strip away the end 3/8 inch of wire insulation.
Make the crimp in the proper station of a recommended
3M crimp tool: TH-440, TH-450 (scissor style) hand tools,
or TR-490 (ratchet style) hand tools.
Specifications
Barrel Crimp (Electrical)
Wire Size:
Barrel Seam:
See Table Above
Butted
Max. Voltage Rating:
600 V Building Wire
1000 V Signs or
Fixtures (luminaires)
221˚F (105˚C)
Same as Wire
Vinyl
Suitable for factory application on steel or brass tabs UL or
CSA.
Max.Temperature Rating:
Max. Current:
Insulator Material:
Terminal Material:
Plating:
Suitable for field application on brass tabs, strain relief
required, UL only.
ETP Copper
Tin
Engineering Specification
Crimp-Type Male Quick-Slide Connectors shall,
electrically and mechanically connect permanently to
The Vinyl Insulated 0.187˝ Male Disconnect shall be tin
plated 0.020˝ thick copper, with a 0.187” blade
the prestripped end of a stranded copper wire: and have conforming to ANSI/NEMA DC-2 dimension and a
a flat rectangular tongue portion for mating to a Female 0.24˝ long barrel with a molded vinyl sleeve, color
Disconnect in a separable, reusable manner, forming a
Quick Connect Wiring Connection.
coded, and sized for a specified (AWG) wire range (22-
18, 16-14).
The connector line shall offer tongue variations (size
Insulated connectors shall be UL Listed and CSA
0.250 x 0.032 or 0.187 x 0.020 per ANSI/NEMA DC-2) Certified for 600 volts maximum, building wire: 1000
and barrel variations in wire size 22-18 AWG, 16-14
AWG, 12-10 AWG and construction of non-insulated,
vinyl insulated nylon fully insulated etc...
volts maximum, signs and fixtures (luminaires) The
connector shall be temperature rated 221˚F (105˚C)
maximum.
The Quick-Slide Connectors shall have regulatory
agency coverage (UL Listing, CSA Certification). The
tongue shall be marked with the wire range and the
manufacturer’s symbol. (ꢀ)
Quick Slide Connectors shall be suitable for field or
factory wiring, with a UL Recognized strain relief
required.
3M and Scotchlok are trademarks of 3M
IMPORTANT NOTICE
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability
associated with such use.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,
your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special,
incidental or consequential regardless of the legal theory asserted.
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
http://www.3M.com/elpd
Litho in USA.
© 3M 2002 78-8126-0648-7-A
相关型号:
©2020 ICPDF网 联系我们和版权申明