N10220-6202PC [3M]

3M Mini D Ribbon (MDR) Connectors; 3M微型D丝带( MDR )连接器
N10220-6202PC
型号: N10220-6202PC
厂家: 3M ELECTRONICS    3M ELECTRONICS
描述:

3M Mini D Ribbon (MDR) Connectors
3M微型D丝带( MDR )连接器

连接器
文件: 总6页 (文件大小:369K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
3MMini D Ribbon (MDR) Connectors  
.050Boardmount Through-Hole Vertical Receptacle - Shielded  
102 Series  
• Wiper-on-wiper contact for reliable repetitive  
plugging  
• Rugged die cast metal case construction  
• Screw lockdown for reliable PCB retention  
• Interface latch design for connection stability  
• IEEE 1284C Interface as a 36 contact connector  
• Contacts: 14, 20, 26, 36, 40, 50, 68, 80 and 100  
See Regulatory Information Appendix (RIA) for  
chemical compliance information.  
Date Modified: November 26, 2007  
TS-0427-B  
Sheet 1 of 3  
Physical  
Insulation Material:  
Glass Filled Polyester (PBT) or Glass Filled Polyester (PCT) - (High Temp.  
Option) - See ordering information  
Flammability:  
Color:  
UL 94V-0  
Black (PBT) or Beige (PCT)-High Temp. Option - See ordering information  
Contact Material:  
Plating Underplating:  
Wiping Area:  
Copper Alloy  
100 μ″ [ 2.5 μm ] Nickel  
30 μ″ [ 0.76 μm ] Min. Gold  
Gold flash over Nickel (RIA E1 & C1 apply)  
Zinc Alloy  
Solder Tail Plating:  
Body Material:  
Plating:  
Nickel  
Shroud & Latch Hook  
Material:  
Steel  
Plating:  
Nickel  
Marking:  
3M Logo and Part Number  
Electrical  
Current Rating:  
Insulation Resistance:  
Withstanding Voltage:  
1 A  
8
> 5 × 10 Ω at 500 VDC  
500 V  
for 1 Minute  
RMS  
Environmental  
Temperature Rating:  
-20°C to +85°C  
Solder Dip Test - 260°C for 10 secs., two times after 100°C max. preheat, 60 sec.  
max. duration.  
PBT Insulation Process Rating:  
PCT Insulation Process Rating:  
High Temp. Option: 260°C (profile per J-STD-020C)  
UL File No.: E68080  
3
Interconnect Solutions  
http://www.3M.com/interconnects/  
3M is a trademark of 3M Company.  
For technical, sales or ordering information call  
800-225-5373  
3MMini D Ribbon (MDR) Connectors  
.050Boardmount Through-Hole Vertical Receptacle - Shielded  
102 Series  
Dim ensions  
C
Contact  
Quantity  
A
B
D
E
14  
20  
26  
36  
40  
50  
68  
80  
100  
0.300 [ 7.62 ] 0.93 [ 23.6 ] 1.16 [ 29.5 ] 0.50 [ 12.6 ]  
.77 [ 19.5 ]  
.92 [ 23.4 ]  
1.07 [ 27.2 ]  
0.450 [ 11.43 ] 1.08 [ 27.5 ] 1.31 [ 33.4 ]  
.600 [ 15.24 ] 1.23 [ 31.3 ] 1.46 [ 37.2 ]  
.65 [ 16.4 ]  
.80 [ 20.2 ]  
.850 [ 21.59 ] 1.48 [ 37.6 ] 1.71 [ 43.5 ] 1.05 [ 26.6 ] 1.32 [ 33.5 ]  
.950 [ 24.13 ] 1.58 [ 40.2 ] 1.81 [ 46.1 ] 1.15 [ 29.1 ] 1.42 [ 36.1 ]  
1.200 [ 30.48 ] 1.83 [ 46.5 ] 2.06 [ 52.4 ] 1.40 [ 35.5 ] 1.67 [ 42.4 ]  
1.650 [ 41.91 ] 2.28 [ 57.9 ] 2.51 [ 63.8 ] 1.85 [ 46.9 ] 2.12 [ 53.8 ]  
1.950 [ 49.53 ] 2.58 [ 65.6 ] 2.81 [ 71.5 ] 2.15 [ 54.5 ] 2.42 [ 61.5 ]  
2.450 [ 62.23 ] 3.08 [ 78.3 ] 3.31 [ 84.2 ] 2.65 [ 67.2 ] 2.92 [ 74.2 ]  
.075  
[ 1.905 ]  
.075  
[ 1.905 ]  
C
B
.075  
[ 1.905 ]  
A
.050  
[ 1.27 ]  
.0157 SQ  
[ 0.399 ]  
.134  
[ 3.4 ]  
.23  
[ 5.8 ]  
.19  
[ 4.8 ]  
D
.21  
.05  
[ 1.3 ]  
.05  
[ 1.3 ]  
[ 5.2 ]  
.28  
[ 7.2 ]  
E
Position 2  
Position 1  
(2X) Lockstand Thread  
see ordering information  
below  
Inch  
[m m ]  
.36  
[ 9.1 ]  
Tolerance U nless N oted  
.0  
.00  
.000  
.25  
[ 6.3 ]  
.18  
[ 4.6 ]  
.050  
[ 1.27 ]  
inch ±.1  
±.01 ±.005  
Position  
[ ] D im ensions for R eference  
O nly  
Last Position  
15°  
Ordering Information  
X 102 XX - 62 X 2 P C  
Blank = Stand., PBT Insulator  
N = High Temp. Option, PCT Insulator  
Lockstand Thread  
0 = M 2.6 (Special)  
1 = M 2.5 (Standard)  
Contact Quantity  
(See Table)  
A0 = 100 pos.  
TS-0427-B  
Sheet 2 of 3  
3
Interconnect Solutions  
http://www.3M.com/interconnects/  
3M is a trademark of 3M Company.  
For technical, sales or ordering information call  
800-225-5373  
3MMini D Ribbon (MDR) Connectors  
.050Boardmount Through-Hole Vertical Receptacle - Shielded  
102 Series  
Recommended Board Layout  
Viewed from Connector Side  
Dim e nsions  
C ontact  
Q uantity  
A
B
20, 36, 40, 68, 80 and 100 pos only  
20  
36  
.450 [ 11.43 ]  
.850 [ 21.59 ]  
.950 [ 24.13 ]  
1.081 [ 27.45 ]  
1.481 [ 37.61 ]  
1.581 [ 40.15 ]  
40  
68  
1.650 [ 41.91 ] 2.281 [ 57.93 ]  
1.950 [ 49.53 ] 2.581 [ 65.55 ]  
2.450 [ 62.23 ] 3.081 [ 78.25 ]  
Position 3  
Position 1  
80  
100  
B ± .004  
.112  
[ 2.86 ]  
Position 2  
.028 ± .003  
[ 0.70 ]  
2x 0.20  
[ 5.0 ]  
(See Note)  
A
Dim e nsions  
C ontact  
Q uantity  
A
B
.075 Typ  
[ 1.90 ]  
14  
26  
50  
.300 [ 7.62 ]  
.600 [ 15.24 ]  
0.931[ 23.64 ]  
1.231 [ 31.26 ]  
2x 0.20  
[ 5.0 ]  
.050 Typ  
[ 1.27 ]  
Position  
1.200 [ 30.48 ] 1.831 [ 46.50 ]  
Last Position  
2X .110 ± .003  
2x 0.16  
[ 4.0 ]  
[ 2.8 ]  
2x 0.20  
[ 5.0 ]  
(See Note)  
14, 26, 50 pos only  
Position 3  
Position 1  
B ± .004  
.112  
[ 2.86 ]  
.028 ± .003  
[ 0.70 ]  
Position 2  
(See Note)  
A
2x 0.20  
[ 5.00 ]  
.075 Typ  
[ 1.90 ]  
.2x 0.20  
[ 5.0 ]  
.050 Typ  
[ 1.27 ]  
Position  
2X .110 ± .003  
Dimensions  
[ 2.8 ]  
Last Position  
2x 0.20  
Contact  
Quantity  
2x 0.16  
[ 4.0 ]  
(See Note)  
[ 5.0 ]  
C
D
14  
20  
26  
36  
40  
50  
68  
80  
100  
.78 [ 20.0 ]  
.94 [ 23.8 ]  
1.09 [ 27.6 ]  
1.33 [ 33.9 ]  
1.44 [ 36.5 ]  
1.69 [ 42.8 ]  
2.13 [ 54.2 ]  
2.44 [ 61.9 ]  
2.94 [ 74.6 ]  
.93 [ 23.64 ]  
1.08 [ 27.45 ]  
1.23 [ 31.26 ]  
1.48 [ 37.61 ]  
1.58 [ 40.15 ]  
1.83 [ 46.50 ]  
2.28 [ 57.93 ]  
2.58 [ 65.55 ]  
3.08 [ 78.25 ]  
Note: Plated through holes for .062board thickness.  
Recommended Panel Cut-Out  
.319 ± .004  
[ 8.10 ]  
C ± .004  
D ± .004  
R .060  
[ 1.52 ]  
TS-0427-B  
Sheet 3 of 3  
Note: Panel thickness .079 [ 2.00 ] Max.  
3M is a trademark of 3M Company.  
For technical, sales or ordering information call  
800-225-5373  
3
Interconnect Solutions  
http://www.3M.com/interconnects/  
Regulatory Information Appendix  
3M Electronic Solutions Division/Interconnect  
EUROPE  
Appendix E1: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as  
amended by EU Commission Decision 2005/618/EC.  
This product is RoHS Compliant 2005/95/EC.  
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of  
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless  
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information  
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3Ms entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
Appendix E2: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as  
amended by EU Commission Decision 2005/618/EC.  
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is  
compliant by exemption under EU Commission Decision 2005/747/EC.  
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of  
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless  
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information  
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3Ms entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
Appendix E3: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as  
amended by Commission Decision 2005/618/EC.  
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.  
Unless otherwise stated by 3M in writing, this information represents 3Ms best knowledge and belief based upon information  
provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3Ms entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
Appendix E4: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as  
amended by EU Commission Decision 2005/618/EC.  
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is  
compliant by exemption under EU Commission Decision 2005/717/EC.  
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of  
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless  
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information  
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3Ms entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
RIA-2217B-c  
Appendix E5: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as  
amended by EU Commission Decision 2005/618/EC.  
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under  
Item 6 of the Annex to the Directive.  
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of  
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless  
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information  
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3Ms entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
CHINA  
Appendix C1: China RoHS  
Electronic Industry Standard of the Peoples Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for  
Certain Hazardous Substances in Electronic Information Products.  
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means  
that the product or part does not contain any of the following substances in excess of the following maximum concentration  
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls  
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this  
information represents 3Ms best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3Ms entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
Appendix C2: China RoHS  
Electronic Industry Standard of the Peoples Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for  
Certain Hazardous Substances in Electronic Information Products.  
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that  
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration  
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls  
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this  
information represents 3Ms best knowledge and belief based upon information provided by third party suppliers to 3M.  
The numerical reference in the symbol above should not be construed as a representation regarding the products life or an  
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with  
3M’s Regulatory Information Appendix, then 3Ms entire liability and Buyer’s exclusive remedy will be in accordance with the  
product Warranty stated below.  
RIA-2217B-c  
Appendix C3: China RoHS  
Electronic Industry Standard of the Peoples Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for  
Certain Hazardous Substances in Electronic Information Products.  
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that  
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration  
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls  
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this  
information represents 3Ms best knowledge and belief based upon information provided by third party suppliers to 3M.  
The numerical reference in the symbol above should not be construed as a representation regarding the products life or an  
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with  
3M’s Regulatory Information Appendix, then 3Ms entire liability and Buyer’s exclusive remedy will be in accordance with the  
product Warranty stated below.  
Important Notice  
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness  
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated  
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order  
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.  
Warranty; Limited Remedy; Limited Liability.  
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES  
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the  
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except  
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of  
the legal theory asserted.  
3
3M Electronics  
Interconnect Products  
6801 River Place Blvd.  
Austin, TX 78726-9000  
U.S.A.  
Please recycle. Printed in USA.  
© 3M 2007. All rights reserved.  
RIA-2217B-c  
1-800-225-5373  
www.3m.com/interconnects  
3M is a trademark of 3M Company.  

相关型号:

N10220-6212PC

3M Mini D Ribbon (MDR) Connectors
3M

N10226-52

FEMALE, OTHER D TYPE CONNECTOR, SOLDER, RECEPTACLE
3M

N10226-5212PC

3M™ Mini D Ribbon (MDR) Connectors .050″ Boardmount Thru-Hole Right Angle Receptacle-Shielded
3M

N10226-5212VC

26 CONTACT(S), FEMALE, OTHER D TYPE CONNECTOR, SOLDER, RECEPTACLE
3M

N10226-5213PC

3M Mini D Ribbon (MDR) Connectors
3M

N10226-5213VC

CONNECTOR,D-SHELL,PCB MNT,RECEPT,26 CONTACTS,PIN,0.05 PITCH,PC TAIL TERMINAL,M2.5
3M

N10226-52B2PC

26 CONTACT(S), FEMALE, OTHER D TYPE CONNECTOR, SOLDER, RECEPTACLE, ROHS COMPLIANT
3M

N10226-52B2VC

CONNECTOR,D-SHELL,PCB MNT,RECEPT,26 CONTACTS,PIN,0.05 PITCH,PC TAIL TERMINAL,M2.5
3M

N10226-52B3PC

26 CONTACT(S), FEMALE, OTHER D TYPE CONNECTOR, SOLDER, RECEPTACLE, ROHS COMPLIANT
3M

N10226-52B3VC

26 CONTACT(S), FEMALE, OTHER D TYPE CONNECTOR, SOLDER, RECEPTACLE
3M

N10226-52E2PC

CONNECTOR,D-SHELL,PCB MNT,RECEPT,26 CONTACTS,PIN,0.05 PITCH,PC TAIL TERMINAL,#4-40
3M

N10226-52E3PC

CONNECTOR,D-SHELL,PCB MNT,RECEPT,26 CONTACTS,PIN,0.05 PITCH,PC TAIL TERMINAL,#4-40
3M