N10250-52E2PC [3M]
3M⢠Mini D Ribbon (MDR) Connectors .050â³ Boardmount Thru-Hole Right Angle Receptacle-Shielded; 3MA ?? ¢微型D丝带（ MDR ）连接器.050â ?? ³类型Boardmount通孔直角插座屏蔽
| 型号： | N10250-52E2PC |
| 厂家： | 
3M ELECTRONICS |
| 描述： | 3M⢠Mini D Ribbon (MDR) Connectors .050â³ Boardmount Thru-Hole Right Angle Receptacle-Shielded |
| 文件： | 总6页 (文件大小：410K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
3M™ Mini D Ribbon (MDR) Connectors
.050″ Boardmount Thru-Hole Right Angle Receptacle-Shielded
102 Series
• Wiper-on-wiper contact for reliable repetitive
plugging
• Rugged die cast metal case construction
• SMT compatible PCT insulator material
• Screw or ground lock for reliable PCB retention
• Interface latch design for connection stability
• IEEE 1284C Interface as a 36 contact connector
• Contacts: 14, 20, 26, 36, 40, 50, 68, 80 and 100
• See Regulatory Information Appendix (RIA)
for chemical compliance information
TS-0531-B
Date Modified: November 15, 2007
Sheet 1 of 3
Physical
Insulation Material:
Flammability:
Color:
Glass Reinforced Polyester (PCT)
UL 94V-0
Beige
Contact Material:
Plating
Copper Alloy
Underplating:
Wiping Area:
Solder Tail Plating:
Body
80 μ″ [2.0 μm] Nickel
30 μ″ [0.76 μm] Min. Gold
Gold Flash over Nickel (RIA E1 & C1 apply)
Material:
Zinc Alloy
Plating:
Nickel
Ground Lock Material:
Plating:
Copper Alloy
Tin in combination with gold flash plated tail
Shroud & Latch Hook
Material:
Steel
Plating:
Nickel
Marking:
3M Logo & Part Number
Electrical
Current Rating:
Insulation Resistance:
Withstanding Voltage:
1 A
8
> 5 × 10 Ω at 500 VDC
500 VRMS for 1 Minute
Environmental
Temperature Rating:
-55°C to +105°C
Process Rating:
260°C (profile per J-STD-020C)
UL File No.: E68080
3M
3M is a trademark of 3M Company.
Interconnect Solutions
For technical, sales or ordering information call
http://www.3M.com/interconnects/
800-225-5373
3M™ Mini D Ribbon (MDR) Connectors
.050″ Boardmount Thru-Hole Right Angle Receptacle-Shielded
102 Series
Dimensions
C
Contact
Quantity
A
B
D
E
1.16 [ 29.5 ]
1.31 [ 33.4 ]
1.46 [ 37.2 ]
1.71 [ 43.5 ]
1.81 [ 46.1 ]
2.06 [ 52.4 ]
2.51 [ 63.8 ]
2.81 [ 71.5 ]
3.31 [ 84.2 ]
14
20
26
36
40
50
68
80
100
0.300 [ 7.62 ]
0.450 [ 11.43 ]
0.600 [ 15.24 ]
0.850 [ 21.59 ]
0.950 [ 24.13 ]
1.200 [ 30.48 ]
1.650 [ 41.91 ]
1.950 [ 49.53 ]
2.450 [ 62.23 ]
0.93 [ 23.6 ]
1.08 [ 27.5 ]
1.23 [ 31.3 ]
1.48 [ 37.6 ]
1.58 [ 40.2 ]
1.83 [ 46.5 ]
2.28 [ 57.9 ]
2.58 [ 65.6 ]
3.08 [ 78.3 ]
0.50 [ 12.6 ]
0.65 [ 16.4 ]
0.80 [ 20.2 ]
1.05 [ 26.6 ]
1.15 [ 29.1 ]
1.40 [ 35.5 ]
1.85 [ 46.9 ]
2.15 [ 54.5 ]
2.65 [ 67.2 ]
0.77 [ 19.5 ]
0.92 [ 23.4 ]
1.07 [ 27.2 ]
1.32 [ 33.5 ]
1.42 [ 36.1 ]
1.67 [ 42.4 ]
2.12 [ 53.8 ]
2.42 [ 61.5 ]
2.92 [ 74.2 ]
Inch
[m m ]
Tolerance U nless N oted
.0
.00
.000
inch ±.1
±.01 ±.005
[ ] D im ensions for R eference
O nly
Position 3
C
Position 2
3X .075
[ 1.90 ]
Position 1
B
A
.0157 SQ
[ 0.399 ]
.45
[ 11.4 ]
.34
[ 8.6 ]
.21
[ 5.3 ]
.19
[ 4.8 ]
.190
[ 4.83 ]
.28
[ 7.2 ]
D
E
.05
[ 1.3 ]
.05 [ 1.3 ]
Position 1
Position 2
2X Threaded Hole for
Panel Mounting
(see ordering info below)
.25
[ 6.3 ]
.37
[ 9.4 ]
.19
[ 4.8 ]
Tail Length
(See Ordering Information)
.15
[ 3.8 ]
.050
[ 1.27 ]
Position
15°
Last Position
2X Ground Lock
(Optional)
Ordering Information
N102XX-52XXPC
Contact Quantity
(See Table)
Tail Length
2 = .15 [ 3.9 ] (Standard)
A0 = 100 pos.
3 = .11 [ 2.8 ] (Special Order)
Panel/Board Retention Features
Contacts 14-40: 1 = M2.5 panel/M2.5 screw lock
B = M2.5 panel/ground lock
G = M2.5 panel / with .086 [2.2] ground lock (Special Order see note)
Contacts 50-100: 4 = 4-40 panel/4-40 screw lock
E = 4-40 panel/ground lock
Note: Option G is used with the 52X3 Tail length only.
TS-0531-B
Sheet 2 of 3
G = M2.5 panel/with .086 [2.2] ground lock (Special Order see note)
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Mini D Ribbon (MDR) Connectors
.050″ Boardmount Thru-Hole Right Angle Receptacle-Shielded
102 Series
Recommended Board Layout
Dimensions
Contact
Quantity
(Viewed from Connector Side for 20, 36, 40, 68, 80 and 100 position only)
A
B
20
36
0.450 [ 11.43 ]
0.850 [ 21.59 ]
0.950 [ 24.13 ]
1.650 [ 41.91 ]
1.950 [ 49.53 ]
2.450 [ 62.23 ]
1.081 [ 27.45 ]
1.481 [ 37.61 ]
1.581 [ 40.15 ]
2.281 [ 57.93 ]
2.581 [ 65.55 ]
3.081 [ 78.25 ]
Position 3
.028 ± .003 Dia Typ
[ 0.71 ]
Position 2
40
Position 1
68
.075
[ 1.90 ]
B ± .004
.075 Typ
[ 1.90 ]
80
A
100
.16
[ 4.1 ]
.19 Max
[ 4.8 ]
.19
[ 4.9 ]
Edge of PC Board
Ground Lock*: .102 ± .003 Dia 2X
.050 Typ
[ 1.27 ]
[ 2.60 ]
Screw Lock: .110 ± .003 Dia (14-40 pos) 2X
[ 2.8 ]
Screw Lock: .125 ± .003 Dia (50-100 pos) 2X
[ 3.2 ]
2X .20
[ 5.0 ]
2X .16
[ 4.0 ]
Last Position
* Plated thru hole for .063″ board thickness
Position
Dimensions
Contact
Quantity
A
B
Recommended Board Layout
(For 14, 26 and 50 position only)
14
26
50
0.300 [ 7.62 ]
0.600 [ 15.24 ]
1.200 [ 30.48 ]
0.931 [ 23.64 ]
1.231 [ 31.26 ]
1.831 [ 46.50 ]
Position 3
Position 2
.028 ± .003 Dia Typ
[ 0.70 ]
Position 1
.075
[ 1.90 ]
B ± .004
.19 Max
[ 4.8 ]
A
.16
[ 4.1 ]
3X .075
[ 1.90 ]
.19
[ 4.9 ]
Edge of PC Board
Ground Lock*: .102 ± .003 Dia 2X
.050 Typ
[ 1.27 ]
[ 2.60 ]
Screw Lock: .110 ± .003 Dia (14-40 pos) 2X
[ 2.8 ]
Screw Lock: .125 ± .003 Dia (50-100 pos) 2X
[ 3.2 ]
2X .20
[ 5.0 ]
Last Position
2X .16
[ 4.0 ]
* Plated thru hole for .063″ board thickness
Position
Contact
Quantity
Dimensions
Recommended Panel Cut-out
Note: Panel thickness .079 [ 2.00 ] Max.
C
D
14
20
26
36
40
50
68
80
100
.78 [ 19.9 ] .93 [ 23.64 ]
.94 [ 23.8 ] 1.08 [ 27.45 ]
1.09 [ 27.6 ] 1.23 [ 31.26 ]
1.33 [ 33.9 ] 1.48 [ 37.61 ]
1.44 [ 36.5 ] 1.58 [ 40.15 ]
1.69 [ 42.8 ] 1.83 [ 46.50 ]
2.13 [ 54.2 ] 2.28 [ 57.93 ]
2.44 [ 61.9 ] 2.58 [ 65.55 ]
2.94 [ 74.6 ] 3.08 [ 78.25 ]
.319 ± .004
[ 8.1 ]
R .060
[ 1.5 ]
C ± .004
D ± .004
TS-0531-B
Sheet 3 of 3
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
Interconnect Solutions
http://www.3M.com/interconnects/
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/717/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217B-c
Appendix E5: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under
Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means
that the product or part does not contain any of the following substances in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
RIA-2217B-c
Appendix C3: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3
3M Electronics
Interconnect Products
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
Please recycle. Printed in USA.
© 3M 2007. All rights reserved.
RIA-2217B-c
1-800-225-5373
www.3m.com/interconnects
3M is a trademark of 3M Company.
相关型号：
N10250-52E3PC
D Type Connector, 50 Contact(s), Female, 0.05 inch Pitch, Solder Terminal, #4-40, Receptacle, ROHS COMPLIANT
3M
N10268-5243VC
D Type Connector, 68 Contact(s), Male, 0.05 inch Pitch, Solder Terminal, #4-40, Receptacle
3M
©2020 ICPDF网 联系我们和版权申明