APE1117AG-33-HF [A-POWER]

IC VREG 3.3 V FIXED POSITIVE LDO REGULATOR, 1.5 V DROPOUT, PSSO3, HALOGEN FREE AND ROHS COMPLIANT, SOT-89, 3 PIN, Fixed Positive Single Output LDO Regulator;
APE1117AG-33-HF
型号: APE1117AG-33-HF
厂家: ADVANCED POWER ELECTRONICS CORP.    ADVANCED POWER ELECTRONICS CORP.
描述:

IC VREG 3.3 V FIXED POSITIVE LDO REGULATOR, 1.5 V DROPOUT, PSSO3, HALOGEN FREE AND ROHS COMPLIANT, SOT-89, 3 PIN, Fixed Positive Single Output LDO Regulator

输出元件 调节器
文件: 总6页 (文件大小:79K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Advanced Power  
Electronics Corp.  
APE1117A  
1A LOW DROPOUT LINEAR REGULATOR  
FEATURES  
DESCRIPTION  
APE1117A is a low dropout positive adjustable or  
fixed-mode regulator with minimum of 1A output current  
capability. The product is specifically designed to provide  
well-regulated supply for low voltage IC applications such as  
high-speed bus termination and low current 3.3V logic  
supply. APE1117A is also well suited for other applications  
such as VGA cards. APE1117A is guaranteed to have lower  
than 1.4V dropout at full load current making it ideal to  
provide well-regulated outputs of 1.25 to 5.0 with 6.4V to  
12V input supply.  
1.5V Maximum Dropout at Full Load Current  
Fast Transient Response  
Output Current Limiting  
Built-in Thermal Shutdown  
Good Noise Rejection  
Need only 1uF Capacitor for Stability  
Low-ESR Ceramic Capacitor Required for  
Output Stability.  
3-Terminal Adjustable or Fixed 1.5V, 1.8V,  
2.5V, 3.3V, 5.0V  
Packages : SOT-223, TO-252, SOT-89.  
Halogen Free Product  
TYPICAL APPLICATION  
5V  
5V  
C1  
1uF  
C1  
1uF  
Vin  
Vin  
Vo  
Vout  
Adj  
2.5V/1A  
Vout  
3.3V/1A  
R1  
121Ω  
C2  
1uF  
C2  
GND  
1uF  
R2  
121  
Ω
Tab is Vout  
Tab is Vout  
( 5V/3.3V fixed output )  
( 5V/2.5V ADJ output )  
R2  
Note:  
V = VREF x (1+  
)
o
R
1
Data and specifications subject to change without notice  
1
20120509D  
Advanced Power  
Electronics Corp.  
APE1117A  
ABSOLUTE MAXIMUM RATINGS (at TA=25°C)  
DC Supply Voltage(VIN) ---------------------------------- -0.3V to 15V  
Power Dissipation(PD)Note @TA=25oC, TJ=125oC  
SOT-223 ------ 850mW  
SOT-89 -------- 330mW  
TO-252 -------- 1050mW  
Storage Temperature Range(TST) --------------------- -65°C To 150°C  
Operating Junction Temperature Range(TJ) -------- -40°C To 125°C  
Maximum Junction Temperature(TMJ) ---------------- 150°C  
Thermal Resistance from Junction to Case(Rthjc  
)
SOT-223 ------ 15°C/W  
SOT-89 -------- 100°C/W  
TO-252 -------- 10°C/W  
Note  
Thermal Resistance from Junction to Ambient(Rthja  
)
SOT-223 ------ 117°C/W  
SOT-89 -------- 300°C/W  
TO-252 -------- 92°C/W  
Note. No heat sink; No air flow)  
ORDERING/PACKAGE INFORMATION  
APE1117AXXX -HF  
(Top View)  
Tab is VOUT  
(Top View)  
Tab is VOUT  
(Top View)  
Tab is VOUT  
(Top View)  
Tab is VOUT  
Halogen Free  
Package Type  
Output Voltage  
Blank : ADJ  
15 : 1.5V  
18 : 1.8V  
19 : 1.9V  
25 : 2.5V  
33 : 3.3V  
50 : 5.0V  
K : SOT-223  
G(GR) : SOT-89  
H : TO-252  
SOT-223  
SOT-89 (GR)  
SOT-89 (G)  
TO-252  
1
2
3
1
2
3
1
2
3
3
1
2
ADJ/  
GND  
ADJ/  
GND  
VOUT VIN  
ADJ/  
GND  
VIN VOUT  
VOUT VIN  
VOUT  
ADJ/  
GND  
VIN  
ELECTRICAL SPECIFICATIONS  
(TA=25°C, unless otherwise specified)  
UNITS  
Parameter  
TEST CONDITION  
MIN  
TYP MAX  
Operation Input Voltage  
2.75  
-
12  
V
APE1117AX-  
ADJ/15/18/25  
/33/50  
APE1117AX-  
ADJ/15/18/25  
/33/50  
Dropout Voltage(VIN-VOUT  
)
I
OUT = 1A , δVOUT=1%VOUT  
-
1.3  
1.5  
V
A
(V -VOUT) = 3V  
Current Limit  
1.1  
-
-
IN  
Minimum Load Current  
Line Regulation  
APE1117AX-XX 0°CTJ125°C  
-
-
5
10  
mA  
%
IOUT=10mA, VOUT+1.5V<VIN<VOUT<12V,  
TJ=25°C (Note 1,2)  
APE1117AX-XX  
0.2  
0.5  
2
Advanced Power  
Electronics Corp.  
APE1117A  
ELECTRICAL SPECIFICATIONS(Cont.)  
UNITS  
Parameter  
TEST CONDITION  
MIN  
TYP MAX  
APE1117AX-ADJ  
APE1117AX-15  
VIN=3.3V,10mAIOUT1A, TJ=25°C  
-
0.4  
1
%
VIN=3V, 10mAIOUT1A, TJ=25°C  
(Note 1,2)  
VIN=3.3V, 0mAIOUT1A, TJ=25°  
C (Note 1,2)  
VIN=4V, 10mAIOUT1A, TJ=25°C  
(Note 1,2)  
VIN=5V,10mAIOUT1A, TJ=25°C  
(Note 1,2)  
-
-
-
-
-
12  
15  
mV  
mV  
mV  
mV  
APE1117AX-18  
APE1117AX-25  
APE1117AX-33  
15  
20  
26  
40  
18  
25  
33  
50  
Load Regulation  
VIN=6.5V,10mAIOUT1A, TJ=25°  
C (Note 1,2)  
APE1117AX-50  
APE1117AX-ADJ  
APE1117AX-15  
mV  
V
IOUT = 10mA, TJ=25°C, (VIN-VOUT)=1.5V  
Reference Voltage  
Output Voltage  
1.225 1.25 1.275  
IOUT = 10mA, TJ = 25°C, 3VVIN≦  
12V  
IOUT = 10mA, TJ = 25°C, 3.3VVIN  
1.47  
1.764  
2.45  
3.235  
4.9  
1.5  
1.8 1.836  
2.5 2.55  
3.3 3.365  
1.53  
V
APE1117AX-18  
APE1117AX-25  
APE1117AX-33  
APE1117AX-50  
V
V
V
V
12V  
IOUT = 10mA, TJ = 25°C, 4VVIN≦  
12V  
IOUT = 10mA, TJ = 25°C, 4.8VVIN  
12V  
IOUT = 10mA, TJ = 25°C, 6.5VVIN  
5
5.1  
12V  
F=120Hz,COUT=10uF, APE1117AX-  
XX, (VIN-VOUT) = 3V, IOUT = 1A  
Ripple Rejection  
-
-
60  
70  
-
dB  
%
I
OUT=10mA  
Temperature Stability  
0.5  
Note1: See thermal regulation specifications for changes in output voltage due to heating effects. Line and load regulation are measured at a  
constant junction temperature by low duty cycle pulse testing. Load regulation is measured at the output lead = 1/18” from the package.  
Note2: Line and load regulation are guaranteed up to the maximum power dissipation of 15W. Power dissipation is determined by the difference  
between input and output differential and the output current. Guaranteed maximum power dissipation will not be available over the full input/output  
range.  
Note3: Quiescent current is defined as the minimum output current required in maintaining regulation. At 12V input/output differential the device is  
guaranteed to regulate if the output current is greater than 10mA.  
3
Advanced Power  
Electronics Corp.  
APE1117A  
PIN DESCRIPTIONS  
PIN SYMBOL  
ADJ/GND  
PIN DESCRIPTION  
A resistor divider from this pin to the VOUT pin and ground sets the output voltage.  
(Ground only for Fixed-Mode)  
The output of the regulator. A minimum of 1uF capacitor ( 10mΩ < ESR < 1Ω)  
must be connected from this pin to ground to insure stability.  
VOUT  
VIN  
The input pin of regulator. A minimum of 1uF capacitor is connected from this pin  
to ground to insure that the input voltage does not sag below the minimum  
dropout voltage during the load transient response. This pin must always be 1.5V  
higher than VOUT in order for the device to regulate properly.  
BLOCK DIAGRAM  
Vin  
3
2
Vout  
+
+
-
+
1.25V  
CURRENT  
LIMIT  
1
GND  
+
(FIXED)  
Thermal  
Shutdown  
-
1
Adj  
4
Advanced Power  
Electronics Corp.  
APE1117A  
TYPICAL PERFORMANCE CHARACTERISTICS  
0.20  
0
1.6  
1.4  
1.2  
1
Tj=25℃  
I load=800mA  
-0.20  
-0.40  
-0.80  
- 1  
0.8  
0.6  
Tj=125℃  
0.4  
0.2  
0
0.8  
1
0.4  
0.6  
0.2  
0
25  
50  
75  
100  
125  
-25  
0
Output Current (A)  
Dropout Voltage vs Output Current  
Temperature ()  
Load Regulation vs Temperature  
2
1.5  
1
1
0.8  
0. 5  
0
0.6  
0.4  
0.2  
0
-0.5  
- 1  
-1.5  
- 2  
-50 -25  
0
25  
50  
75  
100 125 150  
2
4
6
8
10  
12  
Temperature ()  
Input Voltage (V)  
Percent Change in Output  
Voltage vs Temperature  
Line Regulation  
7. 5  
6. 5  
30  
20  
C in=1uF  
C out= 10 uF Tantalum  
Preload= 100mA  
Cin=1uF  
Cout=10 uF Tantalum  
10  
0
5. 5  
40  
-10  
20  
-20  
2
0
1
0
-20  
-40  
-1  
0
20 40 60 80 100 120 140 160 180 200  
TIME (us)  
20 30 40 50 60 70 80 90 100  
TIME (us)  
0
10  
Line Transient Response  
Load Transient Response  
5
Advanced Power  
Electronics Corp.  
APE1117A  
MARKING INFORMATION  
SOT-223  
Part Number  
Marking  
Part Number :  
APE1117AK  
1117A  
APE1117AK-15 117A-15  
APE1117AK-18 117A-18  
APE1117AK-19 117A-19  
APE1117AK-25 117A-25  
APE1117AK-33 117A-33  
APE1117AK-50 117A-50  
XXXXXX  
YWWSSS  
Date Code (YWWSSS)  
Y:Year  
WWWeek  
SSSSequence  
SOT-89  
Identification code :  
Part Number  
Identification code  
APE1117AG(GR)  
17AA(R)  
17AB(R)  
17AC(R)  
17AG(R)  
17AD(R)  
17AE(R)  
17AF(R)  
XXXX  
APE1117AG(GR)-15  
APE1117AG(GR)-18  
APE1117AG(GR)-19  
APE1117AG(GR)-25  
APE1117AG(GR)-33  
APE1117AG(GR)-50  
Date Code (YWWS)  
YWWS  
Y:Year  
WWWeek  
SSequence  
TO-252  
Part Number :  
Part Number  
Marking  
1117A  
APE1117AH  
APE1117AH-15 117A-15  
APE1117AH-18 117A-18  
APE1117AH-19 117A-19  
APE1117AH-25 117A-25  
APE1117AH-33 117A-33  
APE1117AH-50 117A-50  
XXXXXX  
Logo  
YWWSSS  
Date Code (YWWSSS)  
YLast Digit Of The Year  
WWWeek  
SSSSequence  
6

相关型号:

APE1117AG-50

1A Low Dropout Positive Adjustable or Fixed-Mode Regulator
A-POWER

APE1117AG-50-HF

IC VREG 5 V FIXED POSITIVE LDO REGULATOR, 1.5 V DROPOUT, PSSO3, HALOGEN FREE AND ROHS COMPLIANT, SOT-89, 3 PIN, Fixed Positive Single Output LDO Regulator
A-POWER

APE1117AG-HF

IC VREG ADJUSTABLE POSITIVE LDO REGULATOR, Adjustable Positive Single Output LDO Regulator
A-POWER

APE1117AGR

APE1117AGR
A-POWER

APE1117AGR-15

APE1117AGR-15
A-POWER

APE1117AGR-15-HF

IC VREG 1.5 V FIXED POSITIVE LDO REGULATOR, 1.5 V DROPOUT, PSSO3, HALOGEN FREE AND ROHS COMPLIANT, SOT-89, 3 PIN, Fixed Positive Single Output LDO Regulator
A-POWER

APE1117AGR-18

APE1117AGR-18
A-POWER

APE1117AGR-18-HF

IC VREG 1.8 V FIXED POSITIVE LDO REGULATOR, 1.5 V DROPOUT, PSSO3, HALOGEN FREE AND ROHS COMPLIANT, SOT-89, 3 PIN, Fixed Positive Single Output LDO Regulator
A-POWER

APE1117AGR-19

APE1117AGR-19
A-POWER

APE1117AGR-19-HF

IC VREG 1.9 V FIXED POSITIVE LDO REGULATOR, 1.5 V DROPOUT, PSSO3, HALOGEN FREE AND ROHS COMPLIANT, SOT-89, 3 PIN, Fixed Positive Single Output LDO Regulator
A-POWER

APE1117AGR-25

APE1117AGR-25
A-POWER

APE1117AGR-25-HF

IC VREG 2.5 V FIXED POSITIVE LDO REGULATOR, 1.5 V DROPOUT, PSSO3, HALOGEN FREE AND ROHS COMPLIANT, SOT-89, 3 PIN, Fixed Positive Single Output LDO Regulator
A-POWER