APE8800A-15TY5P-HF [A-POWER]
IC VREG 1.5 V FIXED POSITIVE LDO REGULATOR, PDSO5, HALOGEN FREE AND ROHS COMPLIANT, TSOT-23, 5 PIN, Fixed Positive Single Output LDO Regulator;型号: | APE8800A-15TY5P-HF |
厂家: | ADVANCED POWER ELECTRONICS CORP. |
描述: | IC VREG 1.5 V FIXED POSITIVE LDO REGULATOR, PDSO5, HALOGEN FREE AND ROHS COMPLIANT, TSOT-23, 5 PIN, Fixed Positive Single Output LDO Regulator 光电二极管 |
文件: | 总7页 (文件大小:209K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Advanced Power
Electronics Corp.
APE8800A
300mA LOW DROPOUT LINEAR REGULATOR WITH SHUTDOWN
FEATURES
DESCRIPTIOON
Low Dropout Voltage of 250mV at 300mA
Guaranteed 300mA Output Current
Very Low Quiescent Current at 30µA
±2% Output Voltage Accuracy
The APE8800A is a low dropout, positive linear
regulator with very low quiescent current. The APE8800A
can supply 300mA output current with low dropout voltage
at about 250mV. The BP pin with a 10nF bypass capacitor
can help reduce the output noise level. The shutdown
function can provide remote control for the external signal to
decide the on/off state of APE8800A. With a logic high level
at SHDN pin, the device is in the on state, and vice versa.
The APE8800A regulator is able to operate with output
capacitors as small as 1µF for stability. Other than the
current limit protection, APE8800A also offers the on chip
thermal shutdown feature providing protection against
overload or any condition when the ambient temperature
exceeds the maximum junction temperature.
Needs Only 1µF Capacitor for Stability
Thermal Shutdown Protection
Current Limit Protection
Active Low Shutdown Control
Low-ESR Ceramic Capacitor for Output Stability.
Tiny Package: SOT-23-5L & TSOT-23-5L
RoHS Compliant & Halogen Free
The APE8800A offers high precision output voltage of
+2%. It is available in fixed output voltages including 1.2V,
1.5V, 1.8V, 2.5V, 2.8V, 3.0V, 3.1V, 3.3V, 3.6V, 4.5V and
5.0V. The APE8800A is housed in low-profile, space-saving
SOT-23-5L & TSOT-23-5L package.
APPLICATIONS
DSC
Wireless Devices
LCD Modules
Battery Power Systems
Card Readers
PDA
TYPICAL APPLICATION
Figure 1. Typical Application Circuit of APE8800A
Note:To prevent oscillation, it is recommended to use minimum 1µF X7R or X5R dielectric capacitors if
ceramics are used as input/output capacitors.
ORDERING / PACKAGE INFORMATION
(Top View)
Halogen Free
APE8800A - X X X -HF
P: Pb Free with Commercial
Standard (RoHS Compliant)
Output Voltage
Package Type
Y5 : SOT-23-5L
TY5 :TSOT-23-5L
1
2
3
5
4
VIN
GND
VOUT
BP
12 : 1.2V
15 : 1.5V
18 : 1.8V
25 : 2.5V
28 : 2.8V
30 : 3.0V
31 : 3.1V
33 : 3.3V
36 : 3.6V
45 : 4.5V
50 : 5.0V
SHDN
SOT-23-5L (Y5)
TSOT-23-5L (TY5)
Data and specifications subject to change without notice
1
20110615F
Advanced Power
Electronics Corp.
APE8800A
ABSOLUTE MAXIMUM RATINGS
Input Voltage (VIN) ----------------------------------------- 6V
Power Dissipation ------------------------------------------ 0.4W
Storage Temperature Range (Tstg) --------------------- -65°C To 150°C
Maximum Junction Temperature (TJ) ----------------- 150°C
Lead Temperature (Soldering, 10sec, TLEAD) ------- 260°C
Thermal Resistance Junction to Ambient (Rthja)
250oC/W
Note:Stresses beyond those listed under “Absolute Maximum Ratings" may cause permanent damage to the device.
RECOMMENDED OPERATING CONDITIONS
Input Voltage (VIN) ----------------------------------------- 2.8 to 5.5V
Operating Junction Temperature Range (TJ) ------- -40 to 125oC
Ambient Temperature (TA) ------------------------------ -40 to 85oC
ELECTRICAL SPECIFICATIONS
( VIN=VOUT+1V or VIN=2.8V whichever is greater, SHDN pin connected to VIN , CIN=1µF, COUT=1µF, TA=25 ºC,
unless otherwise specified)
UNITS
%
Parameter
SYM
∆VOUT
ILIMIT
IQ
TEST CONDITION
MIN
TYP MAX
Output Voltage Accuracy
Current Limit
IO=1mA
-2
-
-
2
-
RLoad=1Ω
300
mA
µA
Quiescent Current
Standby Current
IO= 0mA
-
-
-
-
-
-
-
30
-
55
1.5
-
ISTBY
VIN=2.8 ~ 5V, Output Off
µA
1.2V ≦ VOUT ≦ 2.0V
1100
350
250
1
VDROP
IO=300mA
Dropout Voltage (Note 1)
mV
2.0V < VOUT ≦ 2.8V
2.8V < VOUT ≦ 4.5V
-
-
Line Regulation
∆VLINE
IO=1mA, VIN=VOUT +1V or 5V
IO=0mA to 300mA
5
mV
mV
Load Regulation (Note 2)
∆VLOAD
6
20
VIN=VOUT+1V
Ripple Rejection
PSRR
-
60
-
dB
COUT=1uF, fRIPPLE = 120Hz
Output Noise
∆n
TC
C
BP=10nF, f=1KHz, VIN=5V
-
0.4
50
160
25
-
-
uV/√Hz
ppm/ oC
Temperature Coefficient
Thermal Shutdown Temperature
Thermal Shutdown Hysteresis
Shutdown Pin Current
IOUT = 1mA, VIN = 5V
-
-
TSD
-
-
oC
oC
µA
V
∆TSD
ISHDN
-
-
0.1
-
-
Noise Bypass Terminal Voltage
Shutdown Pin Voltage (ON)
Shutdown Pin Voltage (OFF)
Shutdown Exit Delay Time
VREF
-
1.4
-
1.2
-
VSHDN (ON)
VSHDN (OFF)
∆T
-
V
-
0.4
-
V
C
BP=10nF, COUT=1uF, IO=30mA
-
300
µs
Note 1:The dropout voltage is defined as VIN-VOUT, which is measured when VOUT drop about 100mV.
Note 2:Regulation is measured at a constant junction temperature by using 40ms current pulse and load regulation in the load range from
0mA to 300mA.
2
Advanced Power
Electronics Corp.
APE8800A
PIN DESCRIPTIONS
PIN SYMBOL PIN DESCRIPTION
Power is supplied to this device from this pin which is required an input filter capacitor. In general, the input
capacitor in the range of 1µF to 10µF is sufficient.
VIN
The output supplies power to loads. The output capacitor is required to prevent output voltage from oscillation.
The APE8800A is stable with an output capacitor 1µF or greater. The larger output capacitor will be required for
VOUT
application with larger load transients. The large output capacitor could reduce output noise, improve stability,
and PSRR.
GND
BP
Common ground pin
Reference Noise Bypass , the Bypass Capacitor > 1nF
Chip Enable (Active High)
SHDN
BLOCK DIAGRAM
Figure 2. Block Diagram of APE8800A
3
Advanced Power
Electronics Corp.
APE8800A
APPLICATION INFORMATIO
The APE8800A is a low dropout linear regulator that could provide 300mA output current at
dropout voltage about 250mV. Current limit and on chip thermal shutdown features provide
protection against any combination of overload or ambient temperature that could exceed maximum
Output & Input Capacitor
The APE8800A regulator is designed to be stable with a wide range of output capacitors. The
ESR of the output capacitor affects stability. Larger value of the output capacitor decreases the
peak deviations and improves transient response for larger current changes.
The capacitor types (aluminum, ceramic, and tantalum) have different characterizations such
as temperature and voltage coefficients. All ceramic capacitors are manufactured with a variety of
dielectrics, each with different behavior across temperature and applications. Common dielectrics
used are X5R, X7R and Y5V. It is recommended to use 1uF to 10uF X5R or X7R dielectric ceramic
capacitors with 30mΩ to 50mΩ ESR range between device outputs and ground for stability. The
APE8800A is designed to be stable with low ESR ceramic capacitors and higher values of
capacitors and ESR could improve output stability. The ESR of output capacitor is very important
because it generates a zero to provide phase lead for loop stability.
There are no requirements for the ESR on the input capacitor, but its voltage and temperature
Protection Features
In order to prevent overloading or thermal condition from damaging the device, APE8800A has
internal thermal and current limiting functions designed to protect the device. It will rapidly shut off
PMOS pass element during overloading or over temperature condition.
Thermal Consideration
The power handling capability of the device will be limited by maximum operation junction
temperature. The power dissipated by the device will be estimated by PD = IOUT x (VIN-VOUT). The
power dissipation should be lower than the maximum power dissipation listed in “Absolute Maximum
Ratings” section.
Shutdown Operation
The APE8800A is shutdown by pulling the SHDN input low, and turned on by driving the SHDN
high. If this function is not used, the SHDN input should be tied to VIN to keep the regulator on at all
times (the SHDN must not be left floating).
4
Advanced Power
Electronics Corp.
APE8800A
TYPICAL PERFORMANCE CHARACTERISTICS
Quiescent Current vs. Input Voltage
Current Limit vs. Temperature
Output Voltage vs. Temperature
Current Limit vs. Input Voltage
Quiescent Current vs. Temperature
Dropout Voltage vs. Temperature
5
Advanced Power
Electronics Corp.
APE8800A
TYPICAL PERFORMANCE CHARACTERISTICS
Shutdown Function
Load Transient Response
(VIN=5V, IOUT=150mA, CIN=1uF, COUT=1uF )
Line Transient Response
Shutdown Exit Delay Time
(VIN=4~5V IOUT=10mA CIN=1uF COUT=1uF )
(VIN=5V IOUT=1mA CIN=1uF COUT=1uF )
6
Advanced Power
Electronics Corp.
APE8800A
MARKING INFORMATION
SOT-23-5L / TSOT-23-5L
Part Number : F& (see Identification code)
Output Voltage Identification Code Output Voltage Identification Code
1.2V
1.5V
1.8V
2.5V
2.8V
3.0V
Fa
Fc
Fb
Fd
Fe
Ff
3.1V
3.3V
3.6V
4.5V
5.0V
Fx
Fh
Fw
FM
Fv
F&SSS
Date Code : SSS
7
相关型号:
APE8800A-15Y5P-HF
IC VREG 1.5 V FIXED POSITIVE LDO REGULATOR, PDSO5, HALOGEN FREE AND ROHS COMPLIANT, SOT-23, 5 PIN, Fixed Positive Single Output LDO Regulator
A-POWER
APE8800A-18TY5P-HF
IC VREG 1.8 V FIXED POSITIVE LDO REGULATOR, PDSO5, HALOGEN FREE AND ROHS COMPLIANT, TSOT-23, 5 PIN, Fixed Positive Single Output LDO Regulator
A-POWER
APE8800A-18Y5P-HF
IC VREG 1.8 V FIXED POSITIVE LDO REGULATOR, PDSO5, HALOGEN FREE AND ROHS COMPLIANT, SOT-23, 5 PIN, Fixed Positive Single Output LDO Regulator
A-POWER
APE8800A-25TY5P-HF
IC VREG 2.5 V FIXED POSITIVE LDO REGULATOR, PDSO5, HALOGEN FREE AND ROHS COMPLIANT, TSOT-23, 5 PIN, Fixed Positive Single Output LDO Regulator
A-POWER
APE8800A-25Y5P-HF
IC VREG 2.5 V FIXED POSITIVE LDO REGULATOR, PDSO5, HALOGEN FREE AND ROHS COMPLIANT, SOT-23, 5 PIN, Fixed Positive Single Output LDO Regulator
A-POWER
APE8800A-28TY5P-HF
IC VREG 2.8 V FIXED POSITIVE LDO REGULATOR, PDSO5, HALOGEN FREE AND ROHS COMPLIANT, TSOT-23, 5 PIN, Fixed Positive Single Output LDO Regulator
A-POWER
APE8800A-28Y5P-HF
IC VREG 2.8 V FIXED POSITIVE LDO REGULATOR, PDSO5, HALOGEN FREE AND ROHS COMPLIANT, SOT-23, 5 PIN, Fixed Positive Single Output LDO Regulator
A-POWER
©2020 ICPDF网 联系我们和版权申明