APE8805N-33 [A-POWER]
600mA LOW DROPOUT LINEAR REGULATOR; 600毫安低压差线性稳压器型号: | APE8805N-33 |
厂家: | ADVANCED POWER ELECTRONICS CORP. |
描述: | 600mA LOW DROPOUT LINEAR REGULATOR |
文件: | 总9页 (文件大小:241K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Advanced Power
Electronics Corp.
APE8805
600mA LOW DROPOUT LINEAR
REGULATOR
Features
Description
● Low Dropout Voltage of 600mV at 600mA
● Guaranteed 600mA Output Current
● Very Low Quiescent Current at about 30uA
● Max. ± 2%Output Accuracy
The APE8805 series are low dropout, positive
linear regulators with very low quiescent current.
The APE8805 can supply 600mA output current
with a low dropout voltage at about 600mV.
● Needs Only 1µF Capacitor for Stability
● Thermal Shutdown Protection
The APE8805 regulator is able to operate with
output capacitors as small as 1µF for stability.
Other than the current limit protection APE8805
also offers on chip thermal shutdown feature
providing protection against overload or any
condition when the ambient temperature exceeds
the junction temperature.
● Current Limit Protection
● Low-ESR Ceramic Capacitor for Output Stability
● RoHS Compliant
Applications
The APE8805 series are available in fixed output
voltage ranging from 1.8 volt , 2.5 volt and 3.3 volt.
The APE8805 series are available in space-saving
SOT-23, SOT-89, and SOT-223 packages.
● DVD/CD-ROMs, CD/RWs
● Wireless Devices
● LCD Modules
● Battery Power Systems
● Card Readers
● XDSL Routers
Typical Application Circuit
VIN
VOUT
APE8805
1µF
COUT
1µF
CIN
GND
Figure 1. Typical Application Circuit of APE8805
Note:To prevent oscillation, it is recommended to use minimum 1µF X7R or X5R dielectric capacitors if ceramics are
used as input/output capacitors.
Data and specifications subject to change without notice.
200427062-1/9
Advanced Power
Electronics Corp.
APE8805
Ordering Information
Pin Assignments
APE8805 -
SOT-23(N)
Output Voltage
18: 1.8V
TOP VIEW
3
25: 2.5V
1. GND
33: 3.3V
2. VOUT
1
2
3. VIN
Package Type
N: SOT-23
SOT-89(G)
G: SOT-89
TOP VIEW
1. GND
GR: SOT-89
K: SOT-223
1
3
2. VIN
2
3. VOUT
SOT-89(GR)
TOP VIEW
1. VOUT
2. GND
1
3
2
3. VIN
Note:The devices are available in fixed voltages range of
1.8V , 2.5V& 3.3V. Please consult APEC sales office or
authorized distributor for availability of special output
voltages.
SOT-223(K)
TOP VIEW
1. VOUT
2. GND
1
3
2
3. VIN
Figure 2. Pin Assignment of APE8805
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
6
Unit
V
Supply Input Voltage
VIN
TJ
Maximum Junction Temperature
Power Dissipation SOT-23
150
0.4
ºC
PD
W
Power Dissipation SOT-89
PD
0.57
0.74
250
175
135
150
260
W
Power Dissipation SOT-223
PD
W
Package Thermal Resistance SOT-23
Package Thermal Resistance SOT-89
Package Thermal Resistance SOT-223
Storage Temperature Range
θJA
θJA
θJA
TS
°C/W
°C/W
°C/W
ºC
-65
Lead Temperature (Soldering, 10 sec.)
TLEAD
ºC
Note:Stresses beyond those listed under “Absolute Maximum Ratings" may cause permanent damage to the device.
2/9
Advanced Power
Electronics Corp.
APE8805
Recommended Operating Conditions
Parameter
Symbol
Min
2.8
-40
Max
5.5
Unit
V
Input Voltage
VIN
Operating Junction Temperature Range
TJ
125
ºC
Electrical Characteristics
(VIN=VOUT+1V or VIN=2.8V whichever is greater, CIN=1µF, COUT=1µF, TA=25 ºC, unless otherwise specified)
Parameter
Symbol
Conditions
Min
Typ
Max
Unit
Output Voltage Accuracy
IO= 1mA
-2
+2
%
∆VOUT
Current Limit
ILIMIT
IQ
600
mA
µA
RLoad=1Ω
Quiescent Current
IO= 0mA
30
50
1.2V ≤ VOUT ≤ 2.0V
1400
800
600
Dropout Voltage (Note 1)
VDROP
IO=600mA
mV
2.0V < VOUT ≤ 2.8V
2.8V < VOUT ≤ 4.5V
Line Regulation
IO=1mA, VIN=VOUT +1V to 5V
1
5
mV
mV
∆VLINE
Load Regulation (Note 2)
IO=0mA to 600mA
VIN=VOUT+1V
13
50
∆VLOAD
Ripple Rejection
PSRR
TC
60
50
dB
ppm/ ºC
ºC
f
RIPPLE = 120Hz, COUT = 1µF
Temperature Coefficient
Thermal Shutdown Temperature
Thermal Shutdown Hysteresis
IOUT = 1mA, VIN = 5V
TSD
∆TSD
160
25
ºC
Note 1:The dropout voltage is defined as VIN-VOUT, which is measured when VOUT drop about 100mV.
Note 2:Regulation is measured at a constant junction temperature by using 40ms current pulse and load regulation in the load range from
0mA to 600mA.
Functional Pin Description
Pin Name
Pin Function
Power is supplied to this device from this pin which is required an input filter capacitor. In general, the input
capacitor in the range of 1µF to 10µF is sufficient.
VIN
The output supplies power to loads. The output capacitor is required to prevent output voltage unstable. The
APE8805 is stable with an output capacitor 1µF or greater. The larger output capacitor will be required for
application with large transit load to limit peak voltage transits, besides could reduce output noise, improve
stability, PSRR.
VOUT
GND
Common ground pin
3/9
Advanced Power
Electronics Corp.
APE8805
Block Diagram
RSEN
VIN
VOUT
PMOS
Current
Limit
Error
Amp
R1
R2
_
+
Thermal
Shutdown
Vref 1.2V
GND
Figure 3. Block Diagram of APE8805
Application Information
The APE8805 series are low dropout linear
regulators that could provide 600mA output
current at dropout voltage about 600mV. Besides,
current limit and on chip thermal shutdown
features provide protection against any
combination of overload or ambient temperature
that could exceed junction temperature.
ESR of output capacitor is very important
beca- use it generates a zero to provide
phase lead for loop stability.
There are no requirements for the ESR on
the input capacitor, but its voltage and
temperature
considered
environment.
coefficient
for device
have
to
be
application
1.Output and Input Capacitor
The APE8805 regulator is designed to be stable
with a wide range of output capacitors. The
ESR of the output capacitor affects stability.
Larger value of the output capacitor decreases
the peak deviations and provides to improve
transition response for larger current changes.
The capacitor types (aluminum, ceramic, and
tant- alum) have different characterizations
such as temperature and voltage coefficients.
All ceramic capacitors are manufactured with a
variety of dielectrics, each with different
behavior across temperature and applications.
Common dielectrics used are X5R, X7R and
Y5V. It is recommended to use 1uF to 10uF X5R
or X7R dielectric ceramic capacitors with 30mΩ
to 50mΩ ESR range betw- een device outputs
to ground for transient stability. The APE8805
is designed to be stable with low ESR ceramic
capacitors and higher values of capacitors and
ESR could improve output stability. So the
2.Protection Features
In order to prevent overloading or thermal
cond- ition from damaging device, APE8805
regulator has internal thermal and current
limiting functions designed to protect the
device. It will rapidly shut off PMOS pass
element during overloading or over
temperature condition.
3.Thermal Consideration
The power handling capability of the device
will be limited by maximum operation
junction temp- erature (125°C). The power
dissipated by the device will be estimated by
PD
= IOUT × (VIN-VOUT). The power
dissipation should be lower than the
maximum power dissipation listed in
“Absolute Maximum Ratings” section.
4/9
Advanced Power
Electronics Corp.
APE8805
Typical Performance Curves
50
45
40
35
30
50
Vout=3.3V
Cin=1uF
Cout=1uF
Vout=1.8V
Cin=1uF
Cout=1uF
45
40
35
30
3.0
3.5
4.0
4.5
5.0
5.5
6.0
3.0
3.5
4.0
4.5
5.0
5.5
6.0
Input Voltage(V)
Figure 4. Quiescent Current vs. Input Voltage
Figure 5. Quiescent Current vs. Input Voltage
650
700
750
800
850
850
Vout=1.8V
Cin=1uF
Cout=1uF
Vout=3.3V
Cin=1uF
Cout=1uF
800
750
700
650
3.0
3.5
4.0
4.5
5.0
5.5
6.0
3.5
4.0
4.5
5.0
5.5
6.0
Input Voltage(V)
Input Voltage(V)
Figure 6. Current limit vs. Input Voltage
Figure 7. Current Limit vs. Input Voltage
850
800
750
700
650
850
Vin=5V
Vin=5V
Vout=3.3V
Cin=1uF
Cout=1uF
Vout=1.8V
Cin=1uF
Cout=1uF
800
750
700
650
-25
0
25
50
75
100
125
-25
0
25
50
75
100
125
Temperature(0C)
Temperature(0C)
Figure 8. Current limit vs. Temperature
Figure 9. Current limit vs. Temperature
5/9
Advanced Power
Electronics Corp.
APE8805
Typical Performance Curves (Continued)
60
50
40
30
20
60
50
40
30
20
Vin=5V
Vin=5V
Vout=1.8V
Cin=1uF
Cout=1uF
Vout=3.3V
Cin=1uF
Cout=1uF
-50
-25
0
25
50
75
100
125
-25
0
25
50
75
100
125
Temperature(0C)
Temperature(0C)
Figure 10. Quiescent Current vs. Temperature
Figure 11. Quiescent Current vs. Temperature
1.90
3.40
Vin=5V
Vin=5V
Cin=1uF
Cout=1uF
Cin=1uF
Cout=1uF
1.85
3.35
3.30
3.25
3.20
1.80
1.75
1.70
-25
0
25
50
75
100
125
-25
0
25
50
75
100
125
Temperature(0C)
Temperature(0C)
Figure 12. Temperature Stability
Figure 13. Temperature Stability
1000
Cin=1uF
Cout=1uF
Vout=3.3V
Tj=1250C
800
600
400
200
0
Tj=850C
Tj=250C
Tj=-400C
0
100
200
300
400
500
600
Loading Current(mA)
Figure 14. Dropout Voltage vs. Loading Current
6/9
Advanced Power
Electronics Corp.
APE8805
Typical Performance Curves (Continued)
VIN=4V IOUT= 1mA to150mA
VOUT=3.3V CIN=1uF COUT=1uF
VIN=4V IOUT=1mA to 150mA
VOUT=3.3V CIN=1uF COUT=4.7uF
Figure 15. Load Transition Response
Figure 16. Load Transition Response
VIN=3V to 4V IOUT=10mA VOUT= 1.8V CIN=1uF COUT=1uF
VIN=3V to 4V IOUT=10mA VOUT= 1.8V CIN=1uF COUT=4.7uF
Figure 17. Line Transition Response
Figure 18. Line Transition Response
7/9
Advanced Power
Electronics Corp.
APE8805
Outline Information
SOT-23 Package (Unit: mm)
DIMENSION IN MILLIMETER
SYMBOLS UNIT
MIN
NOM
MAX
A
A1
A2
b
1.00
1.10
1.30
0.00
0.70
0.35
0.10
2.70
1.40
---
---
0.80
0.40
0.15
2.90
1.60
1.90(TYP)
2.80
---
0.10
0.90
0.50
0.25
3.10
1.80
---
C
D
E
e
H
L
2.60
0.37
1º
3.00
---
θ1
5º
9º
Note 1:Package Body Sizes Exclude Mold Flash Protrusions
or Gate Burrs.
Note 2:Tolerance ± 0.1000 mm(4mil) Unless Otherwise Spe-
cified.
Note 3:Coplanarity:0.1000 mm
Note 4:Dimension L Is Measured in Gage plane.
SOT-89 Package (Unit: mm)
DIMENSION IN MILLIMETER
SYMBOLS UNIT
MIN
NOM
MAX
A
L
1.40
1.50
1.60
0.89
0.36
0.41
0.38
4.40
1.40
---
1.04
0.42
0.47
0.40
4.50
1.60
---
1.20
0.48
0.53
0.43
4.60
1.75
4.25
2.60
3.10
0.45
0.85
1.60
b
b1
C
D
D1
HE
E
2.40
2.90
0.35
0.65
1.40
2.50
3.00
0.40
0.75
1.50
e
H
S
e1
8/9
Advanced Power
Electronics Corp.
APE8805
SOT-223 Package (Unit: mm)
DIMENSION IN MILLIMETER
SYMBOLS UNIT
MIN
NOM
MAX
A
A1
B
1.55
1.80
0.02
0.60
2.90
0.24
6.30
3.30
0.12
0.80
3.10
0.32
6.70
3.70
B1
c
D
E
e
2.30 BSC
4.60 BSC
e1
H
L
6.70
0º
7.30
10 º
0.90 MIN
0.06 BSC
L2
α
Life Support Policy
APEC’s products are not authorized for use as critical components in life support devices or other medical systems.
9/9
相关型号:
APE8837AGN2-HF
IC VREG DUAL OUTPUT, FIXED POSITIVE LDO REGULATOR, PDSO6, 2 X 2 MM, HALOGEN AND LEAD FREE, DFN-6, Fixed Positive Multiple Output LDO Regulator
A-POWER
APE8837AY-HF
IC VREG DUAL OUTPUT, FIXED POSITIVE LDO REGULATOR, PDSO6, HALOGEN AND LEAD FREE, SOT-26, 6 PIN, Fixed Positive Multiple Output LDO Regulator
A-POWER
APE8837BGN2-HF
IC VREG DUAL OUTPUT, FIXED POSITIVE LDO REGULATOR, PDSO6, 2 X 2 MM, HALOGEN AND LEAD FREE, DFN-6, Fixed Positive Multiple Output LDO Regulator
A-POWER
APE8837BY-HF
IC VREG DUAL OUTPUT, FIXED POSITIVE LDO REGULATOR, PDSO6, HALOGEN AND LEAD FREE, SOT-26, 6 PIN, Fixed Positive Multiple Output LDO Regulator
A-POWER
APE8837CGN2-HF
IC VREG DUAL OUTPUT, FIXED POSITIVE LDO REGULATOR, PDSO6, 2 X 2 MM, HALOGEN AND LEAD FREE, DFN-6, Fixed Positive Multiple Output LDO Regulator
A-POWER
APE8837CY-HF
IC VREG DUAL OUTPUT, FIXED POSITIVE LDO REGULATOR, PDSO6, HALOGEN AND LEAD FREE, SOT-26, 6 PIN, Fixed Positive Multiple Output LDO Regulator
A-POWER
APE8837DGN2-HF
IC VREG DUAL OUTPUT, FIXED POSITIVE LDO REGULATOR, PDSO6, 2 X 2 MM, HALOGEN AND LEAD FREE, DFN-6, Fixed Positive Multiple Output LDO Regulator
A-POWER
APE8837DY-HF
IC VREG DUAL OUTPUT, FIXED POSITIVE LDO REGULATOR, PDSO6, HALOGEN AND LEAD FREE, SOT-26, 6 PIN, Fixed Positive Multiple Output LDO Regulator
A-POWER
APE8837EGN2-HF
IC VREG DUAL OUTPUT, FIXED POSITIVE LDO REGULATOR, PDSO6, 2 X 2 MM, HALOGEN AND LEAD FREE, DFN-6, Fixed Positive Multiple Output LDO Regulator
A-POWER
©2020 ICPDF网 联系我们和版权申明