335314B00032 [AAVID]
Heat Sink;
| 型号： | 335314B00032 |
| 厂家： | 
AAVID THERMALLOY, LLC |
| 描述： | Heat Sink |
| 文件： | 总4页 (文件大小：101K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
O PTIPIN™ HEAT SINKS
FO R BALL GRID ARRAY (BGA) APPLICATIO NS
Aavid’s heat sinks cool BGA, Super BGA, QFP,
PLCC, and PBGA packaged devices.Typical appli-
cations include set-top boxes, cable modems,
sound and video cards, automotive global posi-
tioning systems(GPS), high resolution printers,
and high-speed network routers.
Aavid’s BGA heat sinks come with a number of
mounting options and in many popular sizes to
fit most applications.
35 x 35 mm OptiPin
THERMAL PERFORMANCE
FEATURES:
• The first OptiPin heat sink, the 40 x 40 mm,
cools Intel’s i960® RP/RD embedded micro-
processors
AIR VELOCITY FT/MIN
100 200 300 400 500 600
0
100
20
18
16
14
12
10
8
6
4
2
0
90
80
70
60
50
40
30
20
10
3718
3719
3720
• Micro-thin fins provide 20% more cooling per-
formance than conventional cross-cut heat
sinks, making these the optimum cooling solu-
tion for most applications
• The 35 x 35 mm footprint is available in three
different heights: 7.0 mm, 14.0 mm, and 27.9 mm
(see below for part number information).
0
0
1
2
3
4
5
6
HEAT DISSIPATED (WATTS)
• All OptiPins come with a standard anodized
finish, and are available with double-sided ther-
mal interface tape particular to metal, ceramic,
or plastic packages, or without tape for epoxy
attachment
40 x 40 mm OptiPin
THERMAL PERFORMANCE
AIR FLOW (FT/MIN)
0
200
400
600
100
90
80
70
60
50
40
30
20
10
0
9
8
7
6
5
4
3
2
NOTE: 1070 tape attaches the OptiPin to ceramic and
metal packages and T410 attaches to plastic packages.
3644
1
0
0
4
8
10
POWER (WATTS)
O RDERING INFO RMATIO N
SIZE
L x W
(m m )
HEIGHT
(m m )
FO R EPOXY
ATTACHMENT
1070* TW O -SIDED,
PRE-APPLIED
THERMAL TAPE
T410* TW O -SIDED,
PRE-APPLIED
THERMAL TAPE
35 X 35
35 X 35
35 X 35
40 X 40
7.0
14.0
27.9
11.4
371824B00000
371924B00000
372024B00000
364424B00000
371824B00032
371924B00032
372024B00032
364424B00032
371824B00034
371924B00034
372024B00034
364424B00034
NOTE: 1070 tape is for attachment to ceramic or metal packages; and T410 is for attachment to plastic packages.
STANDARD HEAT SINKS FO R BALL GRID ARRAY APPLICATIO NS
O RDERING INFO RMATIO N FO R OTHER PO PULAR BGA HEAT SINKS:
Aavid Part Number
W
L
H
θsa@ 200
˚C/W LFM
Fig. #
Added Features*
335114B00000
335124B00032
335214B00000
335214B00032
335224B00032
335314B00000
335314B00032
373024B00000
335514B00000
335714B00000
335714B00032
335724B00000
335724B00032
335814B00000
335814B00032
335824B00032
373114B00032
336314B00000
336314B00032
336614B00000
336614B00032
336714B00000
362914B00000
363014B00000
24.1
24.1
25.0
25.0
25.0
27.0
27.0
27.9
28.4
30.1
30.1
30.1
30.1
30.1
30.1
30.1
33.0
36.1
36.1
38.1
38.1
40.0
49.8
49.8
24.1
24.1
25.0
25.0
25.0
27.0
27.0
27.9
28.4
30.1
30.1
30.1
30.1
30.1
30.1
30.1
33.0
36.1
36.1
38.1
38.1
40.0
49.8
49.8
23.7
23.7
10.0
10.0
10.0
11.4
11.4
8.9
15.2
7.0
7.0
7.0
7.0
8.8
7.9
18.0
18.0
16.5
9.0
9.0
12.1
7.9
15.0
15.0
13.6
13.6
10.5
10.5
9.0
8.1
7.3
7.3
5.1
5.1
7.6
2.6
2.4
1
2
1
1
2
1
1
2
1
1
1
2
2
1
1
2
1
1
1
1
1
1
1
1
1070 tape pre-installed
1070 tape pre-installed
1070 tape pre-installed
1070 tape pre-installed
1070 tape pre-installed
1070 tape pre-installed
9.4
9.4
9.4
1070 tape pre-installed
1070 tape pre-installed
1070 tape pre-installed
12.7
17.0
17.0
16.0
16.0
19.1
25.4
30.5
1070 tape pre-installed
1070 tape pre-installed
All part numbers shown specify anodized finish.All dimensions are nominal and shown in millimeters.
*1070 tape recommended for ceramic or metal packages. Use epoxy or T410 for plastic packages.
Figure 1: Straight-Fin Heat Sink
Figure 2: Cross-Cut Heat Sink
INSTALLATIO N PRO CEDURE FO R THER-A-GRIP 1070:
Step 1: Make sure the chip surface is clean and free from any possible contaminants.
Wipe surface with industrial solvent, e.g., isopropyl alcohol, acetone.
Assem bly Tim e
Pressure
Tem perature
22˚C 50˚C
15 sec 5 sec
5 sec 3 sec
10 psi
30 psi
Step 2: Peel off the blue mylar embossed liner from the tape. Center the heat sink on the chip
and apply one of the following recommended temperature/pressure options:
TW O -PIN HEAT SINKS FO R BALL GRID ARRAY APPLICATIO NS
Aavid’s two-pin heat sink is designed for IC’s in
Ball Grid Array packages, and incorporates two
captive spring-loaded pins.Two-pin heat sinks
are ideal for applications that require robust
attachment for vertical-mounted boards, such
as in telecommunications, automotive, and
computer systems,
Aavid’s design breakthrough saves approximately
40% of the board space compared to four-pin
versions.The two-pin heat sinks fit standard
motherboard hole pattern for the AGP and PCI
chip sets.
THERMAL PERFORMANCE
THERMAL PERFORMANCE
AIR VELOCITY - LFM
100 200 300 400 500 600
AIR VELOCITY - LFM
200 300 400
500
100
600
0
0
100
100
20
18
16
14
12
10
8
6
4
2
0
20
18
16
14
12
10
8
90
80
70
60
50
40
30
20
10
90
80
70
60
50
40
30
20
10
6
4
2
0
3353
3727/3732
3728
3365
3730
3729/3733
0
0
0
1
2
3
4
5
6
0
1
2
3
4
5
6
HEAT DISSIPATED (WATTS)
HEAT DISSIPATED (WATTS)
TW O -PIN BGA HEAT SINK P/N
372724M02000
Two-pin BGA heat
sinks use approxi-
mately 40% less
space (white area)
than comparable
four-pin heat sinks
(gray area).
R 3.25
Ø 3.0
28.0 ± 0.2
28.0 ± 0.2
6.5 ± 0.2
Dimensions in mm
Theta @200LFM:13.30˚ C/W
O RDERING INFO RMATIO N
AAVID PART NUMBER
372724M02000
THETA @ 200 LFM
13.3˚ C/W
FIG. #
DESCRIPTIO N
Two-Pin BGA Heat Sink
BGA Heat SInk
BGA Heat Sink
Two-Pin BGA Heat Sink
BGA Heat Sink
1
2
3
4
5
373224M00000
372824M00000
372924M02000
373324M00000
13.3˚ C/W
10.7˚ C/W
11.0˚ C/W
11.0˚ C/W
NOTE: All dimensions are nominal and shown in millimeters.
TW O -PIN HEAT SINKS FO R BALL GRID ARRAY APPLICATIO NS
BGA HEAT SINK P/N 373224M00000
BGA HEAT SINK P/N 372824M00000
28.0 ± 0.2
35.0
35.0
28.0 ± 0.2
15.0
5.6 ± 0.2
5.8 ± 0.2
Theta @200LFM:13.3˚ C/W
Dimensions in mm
Theta @200LFM:10.7˚ C/W
Dimensions in mm
TW O -PIN BGA HEAT SINK P/N
372924M02000
BGA HEAT SINK P/N 373324M00000
37.4 ± 0.4
6.0 ± 0.2
6.0 ± 0.3
48.8 ± 0.4
37.4 ± 0.4
Theta @200LFM:11.0˚ C/W
Theta @200LFM:11.0˚ C/W
Dimensions in mm
Dimensions in mm
AAVID
THERMALLOY
This data sheet represents only one of a broad range of products we make to cool electronics. Our representatives can help you configure a
complete cooling solution for your individual applications. For assistance, contact any one of them from our web site or at the locations below.
Aavid Thermalloy, along with Fluent Inc.’s Icepak thermal design software and Applied Thermal Technologies, Inc. thermal design and validation services, make up
The Total Integrated Solution for Cooling Electronics™. For more information on how to put our strengths to work for you, visit our web site at: http://www.aavidthermalloy.com;
TEL: (603) 224-9988, or contact Fluent at: http://www.icepak.com;TEL: (603) 643-2600, or Applied at: http://www.thermalcooling.com;TEL: (603) 225-6523.
For technical assistance, or placing an order, please visit our web site for the local sales representative: http://www.aavid.com/atp/globalSalesRep/globalSales.html
or distributor near you: http://www.aavid.com/distribs/index.html
Corporate O ffice - Aavid USA: 80 Commercial Street, Concord, NH 03301 TEL: (603) 224-9988 FAX: (603) 223-1790
International Locations:
Aavid Canada: 440 Hanlon Road • Woodbridge, Ontario • Canada L4L 3P6 • TEL: (905) 850-9595 • FAX: (905) 850-9599
Aavid Singapore: No. 5 Woodlands Industrial Park E1 757728 • TEL: (65)362 8388 • FAX: (65)362 8588
Aavid Taiwan/Japan: 3F, No. 25, Lane 228, AnKang Road, NeiHu,Taipei •114 Taiwan R.O.C. • TEL: (886) 22-793-5677 • FAX: (886) 22-793-3460
Aavid Europe: Unit C Hillbottom Road • Sands Industrial Estate • High Wycombe, Bucks, England HP12 4HS • TEL: (44) 1494-474747 • FAX: (44) 1494-474748
PLEASE NOTE: Our customers are reminded that they bear the responsibility for testing Aavid Thermalloy, products for proposed use. Any information furnished by AAVID is believed to be
accurate and reliable, but our customers must bear all responsibility for use and applications of Aavid Thermalloy products since Aavid Thermalloy cannot be aware of all potential uses. AAVID THERMALLOY
MAKES NO WARRANTIES AS TO THE FITNESS, MERCHANTABILITY, OR SUITABILITY OF ANY AAVID PRODUCTS FOR ANY SPECIFIC OR GENERAL USES. AAVID SHALL NOT BE LIABLE FOR INCI-
DENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND. All AAVID THERMALLOY products are sold pursuant to the AAVID THERMALLOY Domestic Terms and Conditions of Sale in effect from time
to time, a copy of which shall be furnished upon request (8911A).
Copyright © Aavid Thermalloy, LLC October 1998.
All icons, drawings, illustrations, and trademarks are the property of Aavid Thermalloy, LLC. and may not be reproduced without express written permission. All rights reserved.
相关型号：
©2020 ICPDF网 联系我们和版权申明