首页 |元器件品牌

S-1711A3318-I6T1U [ABLIC]

6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR;
S-1711A3318-I6T1U
型号： S-1711A3318-I6T1U
厂家： ABLIC    ABLIC
描述：

6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR

输入元件
文件： 总44页 (文件大小：599K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
S-1711 Series  
6.5 V INPUT, 150 mA,  
2-CIRCUIT VOLTAGE REGULATOR  
www.ablic.com  
© ABLIC Inc., 2004-2019  
Rev.3.2_00  
The S-1711 Series is a 2-channel positive voltage regulator with a low dropout voltage, high-accuracy output voltage, and  
low current consumption (150 mA output current) developed based on CMOS technology.  
A 1.0 μF small ceramic capacitor can be used, and a 2-circuit voltage regulator with 1.0% high-accuracy output voltage is  
incorporated in SOT-23-6 or super-small SNT-6A package. A/ B/ E/ F type is provided with a discharge shunt function  
allowing high-speed output response when the ON/OFF pin is used.  
Compared with the conventional 150 mA output current 2-channel CMOS voltage regulators, high-density mounting is  
realized by using super-small SNT-6A package and a small ceramic capacitor. Also, the low current consumption makes  
the S-1711 Series ideal for mobile devices.  
Features  
• Output voltage:  
1.5 V to 5.5 V, selectable in 0.1 V step  
• Input voltage:  
2.0 V to 6.5 V  
• Output voltage accuracy:  
• Dropout voltage:  
1.0%  
200 mV typ. (3.0 V output product, IOUT = 150 mA)  
• Current consumption:  
During operation:  
During power-off:  
Possible to output 150 mA (VIN ≥ VOUT(S) + 1.0 V)*1 (Per circuit)  
A ceramic capacitor of 1.0 μF or more can be used.  
70 dB typ. (f = 1.0 kHz)  
70 μA typ., 90 μA max. (Per circuit)  
0.1 μA typ., 1.0 μA max.  
• Output current:  
• Input and output capacitors:  
• Ripple rejection:  
• Built-in overcurrent protection circuit: Limits overcurrent of output transistor.  
• Built-in ON/OFF circuit:  
Ensures long battery life.  
Discharge shunt function "available" / "unavailable" is selectable.  
Pull-down function "available" / "unavailable" is selectable.  
Ta = −40°C to +85°C  
• Operation temperature range:  
• Lead-free, Sn 100%, halogen-free*2  
*1. Attention should be paid to the power dissipation of the package when the output current is large.  
*2. Refer to “Product Name Structure” for details.  
Applications  
• Constant-voltage power supply for cellular phone  
• Constant-voltage power supply for battery-powered device  
• Constant-voltage power supply for home electric appliance  
Packages  
• SNT-6A  
• SOT-23-6  
1
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
Block Diagrams  
1. S-1711 Series A type  
*1  
Function  
ON/OFF logic  
Discharge shunt function  
Pull-up resistor  
Status  
Active “H”  
Available  
None  
ON/OFF1  
VOUT1  
6
2
4
1
Overcurrent  
protection circuit  
Pull-down resistor  
Available  
ON/OFF  
circuit  
+
−
*1  
Reference  
voltage circuit  
*1  
VIN  
VSS  
5
Overcurrent  
protection circuit  
ON/OFF  
circuit  
+
−
*1  
Reference  
voltage circuit  
ON/OFF2  
VOUT2  
3
*1. Parasitic diode  
Figure 1  
2. S-1711 Series B type  
*1  
Function  
ON/OFF logic  
Discharge shunt function  
Pull-up resistor  
Status  
Active “H”  
Available  
None  
ON/OFF1  
VOUT1  
6
2
4
1
Overcurrent  
protection circuit  
Pull-down resistor  
None  
ON/OFF  
circuit  
+
−
*1  
Reference  
voltage circuit  
*1  
VIN  
VSS  
5
Overcurrent  
protection circuit  
ON/OFF  
circuit  
+
−
*1  
Reference  
voltage circuit  
ON/OFF2  
VOUT2  
3
*1. Parasitic diode  
Figure 2  
2
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
3. S-1711 Series C type  
*1  
Function  
ON/OFF logic  
Discharge shunt function  
Pull-up resistor  
Status  
Active “H”  
None  
ON/OFF1  
VOUT1  
6
2
4
1
Overcurrent  
None  
protection circuit  
Pull-down resistor  
Available  
ON/OFF  
circuit  
+
−
Reference  
voltage circuit  
*1  
VIN  
VSS  
5
Overcurrent  
protection circuit  
ON/OFF  
circuit  
+
−
Reference  
voltage circuit  
ON/OFF2  
VOUT2  
3
*1. Parasitic diode  
Figure 3  
4. S-1711 Series D type  
*1  
Function  
ON/OFF logic  
Discharge shunt function  
Pull-up resistor  
Status  
Active “H”  
None  
None  
None  
ON/OFF1  
VOUT1  
6
2
4
1
Overcurrent  
protection circuit  
Pull-down resistor  
ON/OFF  
circuit  
+
−
Reference  
voltage circuit  
*1  
VIN  
VSS  
5
Overcurrent  
protection circuit  
ON/OFF  
circuit  
+
−
Reference  
voltage circuit  
ON/OFF2  
VOUT2  
3
*1. Parasitic diode  
Figure 4  
3
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
5. S-1711 Series E type  
*1  
Function  
ON/OFF logic  
Discharge shunt function  
Pull-up resistor  
Pull-down resistor  
Status  
Active “L”  
Available  
Available  
None  
ON/OFF1  
VOUT1  
6
2
4
1
Overcurrent  
protection circuit  
ON/OFF  
circuit  
+
−
*1  
Reference  
voltage circuit  
*1  
VIN  
VSS  
5
Overcurrent  
protection circuit  
ON/OFF  
circuit  
+
−
*1  
Reference  
voltage circuit  
ON/OFF2  
VOUT2  
3
*1. Parasitic diode  
Figure 5  
6. S-1711 Series F type  
*1  
Function  
ON/OFF logic  
Discharge shunt function  
Pull-up resistor  
Status  
Active “L”  
Available  
None  
ON/OFF1  
VOUT1  
6
2
4
1
Overcurrent  
protection circuit  
Pull-down resistor  
None  
ON/OFF  
circuit  
+
−
*1  
Reference  
voltage circuit  
*1  
VIN  
VSS  
5
Overcurrent  
protection circuit  
ON/OFF  
circuit  
+
−
*1  
Reference  
voltage circuit  
ON/OFF2  
VOUT2  
3
*1. Parasitic diode  
Figure 6  
4
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
7. S-1711 Series G type  
*1  
Function  
ON/OFF logic  
Discharge shunt function  
Pull-up resistor  
Pull-down resistor  
Status  
Active “L”  
None  
Available  
None  
ON/OFF1  
VOUT1  
6
2
4
1
Overcurrent  
protection circuit  
ON/OFF  
circuit  
+
−
Reference  
voltage circuit  
*1  
VIN  
VSS  
5
Overcurrent  
protection circuit  
ON/OFF  
circuit  
+
−
Reference  
voltage circuit  
ON/OFF2  
VOUT2  
3
*1. Parasitic diode  
Figure 7  
8. S-1711 Series H type  
*1  
Function  
ON/OFF logic  
Discharge shunt function  
Pull-up resistor  
Status  
Active “L”  
None  
None  
None  
ON/OFF1  
VOUT1  
6
2
4
1
Overcurrent  
protection circuit  
Pull-down resistor  
ON/OFF  
circuit  
+
−
Reference  
voltage circuit  
*1  
VIN  
VSS  
5
Overcurrent  
protection circuit  
ON/OFF  
circuit  
+
−
Reference  
voltage circuit  
ON/OFF2  
VOUT2  
3
*1. Parasitic diode  
Figure 8  
5
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
Product Name Structure  
Users can select the product type, output voltage, and package type for the S-1711 Series. Refer to "1. Product  
name" regarding the contents of product name, "2. Function list of product type" regarding the product type,  
"3. Packages" regarding the package drawings, "4. Product name list" regarding details of the product name.  
1. Product name  
1. 1 SNT-6A  
S-1711  
x
xx xx  
-
I6T1  
U
Environmental code  
U: Lead-free (Sn 100%), halogen-free  
Package abbreviation and IC packing specifications*1  
I6T1: SNT-6A, Tape  
Output voltage of voltage regulator 2  
15 to 55  
(e.g., when the output voltage is 1.5 V, it is expressed as 15.)  
Output voltage of voltage regulator 1  
15 to 55  
(e.g., when the output voltage is 1.5 V, it is expressed as 15.)  
Product type*2  
A to H  
*1. Refer to the tape drawing.  
*2. Refer to “2. Function list of product type”.  
1. 2 SOT-23-6  
S-1711  
x
xx xx  
-
M6T1  
x
Environmental code  
U: Lead-free (Sn 100%), halogen-free  
G: Lead-free (for details, please contact our sales representatives.)  
Package abbreviation and IC packing specifications*1  
M6T1: SOT-23-6, Tape  
Output voltage of voltage regulator 2  
15 to 55  
(e.g., when the output voltage is 1.5 V, it is expressed as 15.)  
Output voltage of voltage regulator 1  
15 to 55  
(e.g., when the output voltage is 1.5 V, it is expressed as 15.)  
Product type*2  
A to H  
*1. Refer to the tape drawing.  
*2. Refer to “2. Function list of product type”.  
6
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
2. Function list of product type  
Table 1  
Product Type  
ON/OFF Logic  
Active “H”  
Discharge Shunt Function  
Pull-up Resistor  
None  
Pull-down Resistor  
Available  
A
B
C
D
E
F
Available  
Available  
None  
Active “H”  
Active “H”  
Active “H”  
Active “L”  
Active “L”  
Active “L”  
Active “L”  
None  
None  
Available  
None  
None  
None  
None  
None  
None  
None  
None  
Available  
Available  
None  
Available  
None  
G
H
Available  
None  
None  
3. Packages  
Drawing Code  
Package Name  
Package  
Tape  
Reel  
Land  
SNT-6A  
PG006-A-P-SD  
MP006-A-P-SD  
PG006-A-C-SD  
MP006-A-C-SD  
PG006-A-R-SD  
MP006-A-R-SD  
PG006-A-L-SD  
SOT-23-6  
⎯
7
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
4. Product name list  
4. 1 S-1711 Series A type  
ON/OFF logic:  
Discharge Shunt Function:  
Active “H”  
Available  
Pull-up Resistor:  
Pull-down Resistor:  
None  
Available  
Table 2 (1 / 2)  
Voltage Regulator 1  
Output Voltage  
Voltage Regulator 2  
Output Voltage  
SNT-6A  
SOT-23-6  
1.5 V 1.0%  
1.5 V 1.0%  
1.5 V 1.0%  
1.5 V 1.0%  
1.5 V 1.0%  
1.5 V 1.0%  
1.5 V 1.0%  
1.8 V 1.0%  
1.8 V 1.0%  
1.8 V 1.0%  
1.8 V 1.0%  
1.8 V 1.0%  
1.8 V 1.0%  
1.8 V 1.0%  
1.8 V 1.0%  
1.8 V 1.0%  
1.8 V 1.0%  
1.8 V 1.0%  
1.85 V 1.0%  
2.0 V 1.0%  
2.3 V 1.0%  
2.3 V 1.0%  
2.4 V 1.0%  
2.4 V 1.0%  
2.5 V 1.0%  
2.5 V 1.0%  
2.5 V 1.0%  
2.5 V 1.0%  
2.5 V 1.0%  
2.5 V 1.0%  
2.5 V 1.0%  
2.6 V 1.0%  
2.6 V 1.0%  
2.6 V 1.0%  
2.6 V 1.0%  
2.6 V 1.0%  
2.7 V 1.0%  
2.8 V 1.0%  
2.8 V 1.0%  
2.8 V 1.0%  
2.8 V 1.0%  
1.5 V 1.0%  
1.8 V 1.0%  
2.6 V 1.0%  
2.8 V 1.0%  
2.85 V 1.0%  
2.9 V 1.0%  
3.3 V 1.0%  
1.5 V 1.0%  
1.8 V 1.0%  
2.5 V 1.0%  
2.7 V 1.0%  
2.75 V 1.0%  
2.7 V 1.0%  
2.85 V 1.0%  
2.9 V 1.0%  
3.0 V 1.0%  
3.2 V 1.0%  
3.3 V 1.0%  
2.8 V 1.0%  
4.5 V 1.0%  
3.2 V 1.0%  
3.3 V 1.0%  
2.4 V 1.0%  
2.5 V 1.0%  
1.5 V 1.0%  
1.8 V 1.0%  
2.2 V 1.0%  
2.5 V 1.0%  
2.8 V 1.0%  
2.9 V 1.0%  
3.3 V 1.0%  
1.8 V 1.0%  
2.6 V 1.0%  
2.8 V 1.0%  
2.9 V 1.0%  
3.0 V 1.0%  
1.8 V 1.0%  
1.5 V 1.0%  
1.8 V 1.0%  
1.9 V 1.0%  
2.5 V 1.0%  
S-1711A1515-I6T1U  
S-1711A1518-I6T1U  
S-1711A1526-I6T1U  
S-1711A1528-I6T1U  
S-1711A152J-I6T1U  
⎯
S-1711A1533-I6T1U  
S-1711A1815-I6T1U  
S-1711A1818-I6T1U  
⎯
S-1711A1827-I6T1U  
S-1711A182H-I6T1U  
S-1711A1828-I6T1U  
S-1711A182J-I6T1U  
S-1711A1829-I6T1U  
S-1711A1830-I6T1U  
⎯
S-1711A1833-I6T1U  
S-1711A1J28-I6T1U  
⎯
S-1711A2332-I6T1U  
S-1711A2333-I6T1U  
S-1711A2424-I6T1U  
S-1711A2425-I6T1U  
S-1711A2515-I6T1U  
S-1711A2518-I6T1U  
⎯
S-1711A2525-I6T1U  
S-1711A2528-I6T1U  
⎯
S-1711A1515-M6T1x  
⎯
⎯
S-1711A1528-M6T1x  
⎯
S-1711A1529-M6T1x  
S-1711A1533-M6T1x  
S-1711A1815-M6T1x  
S-1711A1818-M6T1x  
S-1711A1825-M6T1x  
S-1711A1827-M6T1x  
S-1711A182H-M6T1x  
S-1711A1828-M6T1x  
S-1711A182J-M6T1x  
S-1711A1829-M6T1x  
S-1711A1830-M6T1x  
S-1711A1832-M6T1x  
S-1711A1833-M6T1x  
S-1711A1J28-M6T1x  
S-1711A2045-M6T1x  
⎯
⎯
S-1711A2424-M6T1x  
S-1711A2425-M6T1x  
S-1711A2515-M6T1x  
S-1711A2518-M6T1x  
S-1711A2522-M6T1x  
S-1711A2525-M6T1x  
S-1711A2528-M6T1x  
S-1711A2529-M6T1x  
S-1711A2533-M6T1x  
S-1711A2618-M6T1x  
⎯
S-1711A2533-I6T1U  
⎯
S-1711A2626-I6T1U  
S-1711A2628-I6T1U  
S-1711A2629-I6T1U  
S-1711A2630-I6T1U  
⎯
S-1711A2815-I6T1U  
S-1711A2818-I6T1U  
⎯
⎯
⎯
⎯
S-1711A2718-M6T1x  
S-1711A2815-M6T1x  
S-1711A2818-M6T1x  
S-1711A2819-M6T1x  
S-1711A2825-M6T1x  
⎯
8
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
Table 2 (2 / 2)  
Voltage Regulator 1  
Voltage Regulator 2  
SNT-6A  
SOT-23-6  
Output Voltage  
2.8 V 1.0%  
2.8 V 1.0%  
2.8 V 1.0%  
2.8 V 1.0%  
2.8 V 1.0%  
2.8 V 1.0%  
2.85 V 1.0%  
2.85 V 1.0%  
2.85 V 1.0%  
2.85 V 1.0%  
2.85 V 1.0%  
2.9 V 1.0%  
2.9 V 1.0%  
3.0 V 1.0%  
3.0 V 1.0%  
3.0 V 1.0%  
3.0 V 1.0%  
3.0 V 1.0%  
3.0 V 1.0%  
3.1 V 1.0%  
3.3 V 1.0%  
3.3 V 1.0%  
3.3 V 1.0%  
3.3 V 1.0%  
3.3 V 1.0%  
3.3 V 1.0%  
3.3 V 1.0%  
3.4 V 1.0%  
4.0 V 1.0%  
5.0 V 1.0%  
5.0 V 1.0%  
Output Voltage  
2.8 V 1.0%  
2.9 V 1.0%  
3.0 V 1.0%  
3.1 V 1.0%  
3.2 V 1.0%  
3.3 V 1.0%  
1.5 V 1.0%  
1.8 V 1.0%  
2.85 V 1.0%  
3.0 V 1.0%  
3.3 V 1.0%  
2.9 V 1.0%  
3.3 V 1.0%  
1.5 V 1.0%  
1.8 V 1.0%  
2.5 V 1.0%  
2.8 V 1.0%  
3.0 V 1.0%  
3.3 V 1.0%  
2.8 V 1.0%  
1.8 V 1.0%  
2.5 V 1.0%  
2.8 V 1.0%  
3.0 V 1.0%  
3.3 V 1.0%  
4.8 V 1.0%  
5.0 V 1.0%  
3.4 V 1.0%  
2.0 V 1.0%  
2.5 V 1.0%  
3.0 V 1.0%  
S-1711A2828-I6T1U  
S-1711A2829-I6T1U  
S-1711A2830-I6T1U  
S-1711A2831-I6T1U  
S-1711A2832-I6T1U  
S-1711A2833-I6T1U  
S-1711A2J15-I6T1U  
S-1711A2J18-I6T1U  
S-1711A2J2J-I6T1U  
⎯
S-1711A2828-M6T1x  
S-1711A2829-M6T1x  
S-1711A2830-M6T1x  
⎯
S-1711A2832-M6T1x  
S-1711A2833-M6T1x  
⎯
⎯
S-1711A2J2J-M6T1x  
S-1711A2J30-M6T1x  
⎯
S-1711A2929-M6T1x  
S-1711A2933-M6T1x  
S-1711A3015-M6T1x  
S-1711A3018-M6T1x  
S-1711A3025-M6T1x  
⎯
S-1711A2J33-I6T1U  
S-1711A2929-I6T1U  
⎯
S-1711A3015-I6T1U  
S-1711A3018-I6T1U  
S-1711A3025-I6T1U  
S-1711A3028-I6T1U  
S-1711A3030-I6T1U  
S-1711A3033-I6T1U  
S-1711A3128-I6T1U  
S-1711A3318-I6T1U  
⎯
S-1711A3030-M6T1x  
S-1711A3033-M6T1x  
⎯
⎯
S-1711A3325-M6T1x  
S-1711A3328-M6T1x  
S-1711A3330-M6T1x  
S-1711A3333-M6T1x  
S-1711A3348-M6T1x  
⎯
⎯
⎯
S-1711A3333-I6T1U  
S-1711A3348-I6T1U  
S-1711A3350-I6T1U  
S-1711A3434-I6T1U  
⎯
⎯
S-1711A4020-M6T1x  
S-1711A5025-M6T1x  
⎯
S-1711A5025-I6T1U  
S-1711A5030-I6T1U  
Remark 1. Please contact our sales representatives for products other than the above.  
2. x: G or U  
3. Please select products of environmental code = U for Sn 100%, halogen-free products.  
9
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
4. 2 S-1711 Series B type  
ON/OFF logic:  
Discharge Shunt Function: Available  
Active “H”  
Pull-up Resistor:  
Pull-down Resistor:  
None  
None  
Table 3  
Voltage Regulator 1  
Output Voltage  
Voltage Regulator 2  
SNT-6A  
SOT-23-6  
Output Voltage  
1.8 V 1.0%  
2.8 V 1.0%  
2.9 V 1.0%  
2.5 V 1.0%  
2.8 V 1.0%  
3.2 V 1.0%  
3.3 V 1.0%  
1.5 V 1.0%  
1.8 V 1.0%  
2.8 V 1.0%  
1.8 V 1.0%  
1.8 V 1.0%  
1.5 V 1.0%  
1.8 V 1.0%  
2.5 V 1.0%  
2.8 V 1.0%  
3.3 V 1.0%  
3.0 V 1.0%  
3.3 V 1.0%  
3.6 V 1.0%  
3.3 V 1.0%  
1.5 V 1.0%  
1.5 V 1.0%  
1.5 V 1.0%  
1.8 V 1.0%  
1.8 V 1.0%  
1.8 V 1.0%  
1.8 V 1.0%  
2.5 V 1.0%  
2.5 V 1.0%  
2.5 V 1.0%  
2.6 V 1.0%  
2.7 V 1.0%  
2.8 V 1.0%  
2.8 V 1.0%  
2.8 V 1.0%  
2.8 V 1.0%  
2.8 V 1.0%  
3.0 V 1.0%  
3.0 V 1.0%  
3.0 V 1.0%  
3.3 V 1.0%  
S-1711B1518-I6T1U  
S-1711B1528-I6T1U  
⎯
S-1711B1825-I6T1U  
S-1711B1828-I6T1U  
⎯
S-1711B1518-M6T1x  
⎯
S-1711B1529-M6T1x  
S-1711B1825-M6T1x  
S-1711B1828-M6T1x  
S-1711B1832-M6T1x  
S-1711B1833-M6T1x  
S-1711B2515-M6T1x  
S-1711B2518-M6T1x  
S-1711B2528-M6T1x  
S-1711B2618-M6T1x  
S-1711B2718-M6T1x  
S-1711B2815-M6T1x  
S-1711B2818-M6T1x  
S-1711B2825-M6T1x  
S-1711B2828-M6T1x  
⎯
S-1711B1833-I6T1U  
⎯
S-1711B2518-I6T1U  
S-1711B2528-I6T1U  
⎯
⎯
S-1711B2815-I6T1U  
S-1711B2818-I6T1U  
⎯
S-1711B2828-I6T1U  
S-1711B2833-I6T1U  
⎯
S-1711B3033-I6T1U  
⎯
S-1711B3030-M6T1x  
S-1711B3033-M6T1x  
S-1711B3036-M6T1x  
S-1711B3333-M6T1x  
S-1711B3333-I6T1U  
Remark 1. Please contact our sales representatives for products other than the above.  
2. x: G or U  
3. Please select products of environmental code = U for Sn 100%, halogen-free products.  
10  
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
4. 3 S-1711 Series C type  
ON/OFF logic:  
Active “H”  
Pull-up Resistor:  
None  
Discharge Shunt Function: None  
Pull-down Resistor:  
Available  
Table 4  
Voltage Regulator 1  
Output Voltage  
Voltage Regulator 2  
SNT-6A  
SOT-23-6  
Output Voltage  
1.5 V 1.0%  
1.5 V 1.0%  
2.5 V 1.0%  
2.7 V 1.0%  
2.75 V 1.0%  
2.8 V 1.0%  
3.2 V 1.0%  
2.8 V 1.0%  
2.4 V 1.0%  
2.5 V 1.0%  
1.5 V 1.0%  
1.8 V 1.0%  
2.5 V 1.0%  
1.5 V 1.0%  
1.8 V 1.0%  
2.8 V 1.0%  
2.9 V 1.0%  
3.0 V 1.0%  
3.3 V 1.0%  
2.85 V 1.0%  
2.9 V 1.0%  
1.5 V 1.0%  
1.8 V 1.0%  
2.5 V 1.0%  
3.0 V 1.0%  
3.3 V 1.0%  
3.1 V 1.0%  
1.5 V 1.0%  
1.8 V 1.0%  
1.8 V 1.0%  
1.8 V 1.0%  
1.8 V 1.0%  
1.8 V 1.0%  
1.8 V 1.0%  
1.85 V 1.0%  
2.4 V 1.0%  
2.4 V 1.0%  
2.5 V 1.0%  
2.5 V 1.0%  
2.5 V 1.0%  
2.8 V 1.0%  
2.8 V 1.0%  
2.8 V 1.0%  
2.8 V 1.0%  
2.8 V 1.0%  
2.8 V 1.0%  
2.85 V 1.0%  
2.9 V 1.0%  
3.0 V 1.0%  
3.0 V 1.0%  
3.0 V 1.0%  
3.0 V 1.0%  
3.0 V 1.0%  
3.1 V 1.0%  
S-1711C1515-I6T1U  
S-1711C1815-I6T1U  
⎯
S-1711C1827-I6T1U  
S-1711C182H-I6T1U  
S-1711C1828-I6T1U  
⎯
S-1711C1515-M6T1x  
S-1711C1815-M6T1x  
S-1711C1825-M6T1x  
S-1711C1827-M6T1x  
S-1711C182H-M6T1x  
⎯
S-1711C1832-M6T1x  
S-1711C1J28-M6T1x  
S-1711C2424-M6T1x  
S-1711C2425-M6T1x  
S-1711C2515-M6T1x  
S-1711C2518-M6T1x  
S-1711C2525-M6T1x  
S-1711C2815-M6T1x  
S-1711C2818-M6T1x  
S-1711C2828-M6T1x  
S-1711C2829-M6T1x  
S-1711C2830-M6T1x  
S-1711C2833-M6T1x  
S-1711C2J2J-M6T1x  
S-1711C2929-M6T1x  
S-1711C3015-M6T1x  
S-1711C3018-M6T1x  
S-1711C3025-M6T1x  
S-1711C3030-M6T1x  
S-1711C3033-M6T1x  
S-1711C3131-M6T1x  
S-1711C1J28-I6T1U  
S-1711C2424-I6T1U  
S-1711C2425-I6T1U  
S-1711C2515-I6T1U  
S-1711C2518-I6T1U  
S-1711C2525-I6T1U  
S-1711C2815-I6T1U  
S-1711C2818-I6T1U  
S-1711C2828-I6T1U  
S-1711C2829-I6T1U  
S-1711C2830-I6T1U  
S-1711C2833-I6T1U  
S-1711C2J2J-I6T1U  
S-1711C2929-I6T1U  
S-1711C3015-I6T1U  
S-1711C3018-I6T1U  
S-1711C3025-I6T1U  
S-1711C3030-I6T1U  
S-1711C3033-I6T1U  
⎯
Remark 1. Please contact our sales representatives for products other than the above.  
2. x: G or U  
3. Please select products of environmental code = U for Sn 100%, halogen-free products.  
11  
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
4. 4 S-1711 Series D type  
ON/OFF logic:  
Discharge Shunt Function: None  
Active “H”  
Pull-up Resistor:  
Pull-down Resistor:  
None  
None  
Table 5  
Voltage Regulator 1  
Output Voltage  
Voltage Regulator 2  
SNT-6A  
SOT-23-6  
Output Voltage  
2.5 V 1.0%  
2.6 V 1.0%  
2.8 V 1.0%  
3.2 V 1.0%  
2.5 V 1.0%  
1.8 V 1.0%  
2.8 V 1.0%  
2.85 V 1.0%  
2.9 V 1.0%  
1.5 V 1.0%  
2.85 V 1.0%  
3.0 V 1.0%  
1.8 V 1.0%  
1.8 V 1.0%  
1.8 V 1.0%  
1.8 V 1.0%  
1.9 V 1.0%  
2.5 V 1.0%  
2.5 V 1.0%  
2.5 V 1.0%  
2.6 V 1.0%  
2.8 V 1.0%  
2.85 V 1.0%  
4.2 V 1.0%  
⎯
⎯
S-1711D1825-M6T1x  
S-1711D1826-M6T1x  
S-1711D1828-M6T1x  
S-1711D1832-M6T1x  
S-1711D1925-M6T1x  
S-1711D2518-M6T1x  
S-1711D2528-M6T1x  
⎯
S-1711D1828-I6T1U  
⎯
S-1711D1925-I6T1U  
S-1711D2518-I6T1U  
S-1711D2528-I6T1U  
S-1711D252J-I6T1U  
⎯
S-1711D2815-I6T1U  
S-1711D2J2J-I6T1U  
⎯
S-1711D2629-M6T1x  
S-1711D2815-M6T1x  
⎯
S-1711D4230-M6T1x  
4. 5 S-1711 Series E type  
ON/OFF logic:  
Discharge Shunt Function: Available  
Active “L”  
Pull-up Resistor:  
Pull-down Resistor:  
Available  
None  
Table 6  
Voltage Regulator 1  
Output Voltage  
Voltage Regulator 2  
SNT-6A  
SOT-23-6  
Output Voltage  
3.3 V 1.0%  
1.8 V 1.0%  
3.3 V 1.0%  
1.8 V 1.0%  
2.8 V 1.0%  
3.3 V 1.0%  
⎯
S-1711E2818-I6T1U  
⎯
S-1711E1833-M6T1x  
S-1711E2818-M6T1x  
S-1711E3333-M6T1x  
4. 6 S-1711 Series F type  
ON/OFF logic:  
Discharge Shunt Function: Available  
Active “L”  
Pull-up Resistor:  
Pull-down Resistor:  
None  
None  
Table 7  
Voltage Regulator 1  
Output Voltage  
Voltage Regulator 2  
Output Voltage  
1.8 V 1.0%  
SNT-6A  
S-1711F2818-I6T1U  
SOT-23-6  
2.8 V 1.0%  
⎯
Remark 1. Please contact our sales representatives for products other than the above.  
2. x: G or U  
3. Please select products of environmental code = U for Sn 100%, halogen-free products.  
12  
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
4. 7 S-1711 Series G type  
ON/OFF logic:  
Discharge Shunt Function: None  
Active “L”  
Pull-up Resistor:  
Pull-down Resistor:  
Available  
None  
Table 8  
Voltage Regulator 1  
Output Voltage  
Voltage Regulator 2  
Output Voltage  
3.0 V 1.0%  
SNT-6A  
S-1711G2830-I6T1U  
SOT-23-6  
2.8 V 1.0%  
⎯
4. 8 S-1711 Series H type  
ON/OFF logic:  
Discharge Shunt Function: None  
Active “L”  
Pull-up Resistor:  
Pull-down Resistor:  
None  
None  
Table 9  
Voltage Regulator 1  
Output Voltage  
Voltage Regulator 2  
Output Voltage  
1.8 V 1.0%  
SNT-6A  
SOT-23-6  
2.5 V 1.0%  
⎯
S-1711H2518-M6T1x  
Remark 1. Please contact our sales representatives for products other than the above.  
2. x: G or U  
3. Please select products of environmental code = U for Sn 100%, halogen-free products.  
13  
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
Pin Configurations  
1. SNT-6A  
Table 10  
Symbol  
Pin No.  
Description  
Output voltage pin 1  
Input voltage pin  
Output voltage pin 2  
ON/OFF pin 2  
Top view  
1
2
3
4
5
6
VOUT1  
VIN  
1
2
3
6
5
4
VOUT2  
ON/OFF2  
VSS  
Figure 9  
GND pin  
ON/OFF1  
ON/OFF pin 1  
2. SOT-23-6  
Table 11  
Top view  
Pin No.  
Symbol  
VOUT1  
VIN  
Description  
Output voltage pin 1  
Input voltage pin  
Output voltage pin 2  
ON/OFF pin 2  
6
5
4
1
2
3
4
5
6
VOUT2  
ON/OFF2  
VSS  
1
2
3
GND pin  
Figure 10  
ON/OFF1  
ON/OFF pin 1  
14  
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
Absolute Maximum Ratings  
Table 12  
(Ta = 25°C unless otherwise specified)  
Item  
Symbol  
Absolute Maximum Rating  
Unit  
VIN  
VON/OFF1, VON/OFF2  
VOUT1, VOUT2  
VSS−0.3 to VSS+7  
VSS−0.3 to VIN+0.3  
VSS−0.3 to VIN+0.3  
400*1  
V
V
Input voltage  
Output voltage  
SNT-6A  
V
mW  
mW  
mW  
°C  
Power dissipation  
SOT-23-6  
PD  
300 (When not mounted on board)  
650*1  
Operation ambient temperature  
Storage temperature  
Topr  
Tstg  
−40 to +85  
−40 to +125  
°C  
*1. When mounted on board  
[Mounted board]  
(1) Board size: 114.3 mm × 76.2 mm × t1.6 mm  
(2) Name: JEDEC STANDARD51-7  
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical  
damage. These values must therefore not be exceeded under any conditions.  
(1) When mounted on board  
(2) When not mounted on board  
500  
700  
600  
400  
300  
SOT-23-6  
500  
400  
300  
200  
SOT-23-6  
200  
100  
0
SNT-6A  
50  
100  
0
0
50  
100  
150  
0
100  
150  
Ambient Temperature (Ta) [°C]  
Ambient Temperature (Ta) [°C]  
Figure 11 Power Dissipation of Package  
15  
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
Electrical Characteristics  
Table 13  
Total (2 circuits)  
(Ta = 25°C unless otherwise specified)  
Test  
Item  
Symbol  
Condition  
Condition  
Min.  
Typ.  
140  
Max.  
180  
Unit  
Circuit  
1
Current consumption  
ISS  
VIN = 6.5 V, no load  
⎯
μA  
Voltage regulator 1 or Voltage regulator 2 (Per circuit)  
(Ta = 25°C unless otherwise specified)  
Test  
Item  
Symbol  
Min.  
Typ.  
Max.  
Unit  
Circuit  
VOUT(S)  
VOUT(S)  
VOUT(S)  
Output voltage*1  
VOUT(E)  
VIN = VOUT(S)  
VIN VOUT(S)  
+
+
1.0 V, IOUT = 30 mA  
1.0 V  
V
2, 3  
×
0.99  
×
1.01  
Output current*2  
Dropout voltage*3  
IOUT  
≥
150*5  
0.50  
0.40  
0.30  
0.20  
⎯
⎯
⎯
mA  
V
4, 5  
2, 3  
2, 3  
2, 3  
2, 3  
2, 3  
2, 3  
Vdrop  
IOUT = 150 mA  
VOUT(S) = 1.5 V  
0.54  
0.44  
0.34  
0.26  
0.24  
0.20  
0.58  
0.48  
0.39  
0.39  
0.36  
0.35  
VOUT(S) = 1.6 V  
VOUT(S) = 1.7 V  
V
V
1.8 V  
2.1 V  
2.8 V  
≤
≤
≤
VOUT(S)  
VOUT(S)  
VOUT(S)  
≤
≤
≤
2.0 V  
2.7 V  
5.5 V  
V
V
⎯
V
ΔVOUT1  
Line regulation  
VOUT(S)  
+
0.5 V  
≤
VIN  
≤
6.5 V, IOUT = 30 mA  
⎯
⎯
0.02  
20  
0.1  
40  
% / V  
2, 3  
2, 3  
ΔVIN•VOUT  
VOUT2  
ΔVOUT  
ΔTa•VOUT  
Load regulation  
Output voltage  
Δ
VIN = VOUT(S)  
IN = VOUT(S)  
40  
+
+
1.0 V, 1.0 mA  
≤
IOUT  
≤
150 mA  
mV  
V
1.0 V, IOUT = 30 mA,  
ppm  
⎯
⎯
100  
70  
⎯
2, 3  
1
temperature coefficient*4  
Current consumption  
during operation  
Current consumption  
during power-off  
Input voltage  
−
°
C
≤
Ta ≤ +85  
°
C
/ °C  
ISS1  
VIN = VOUT(S)  
VIN = VOUT(S)  
+
+
1.0 V, ON/OFF pin = ON, no load  
90  
μA  
ISS2  
VIN  
1.0 V, ON/OFF pin = OFF, no load  
⎯
0.1  
⎯
1.0  
6.5  
⎯
μA  
1
1
⎯
2.0  
1.5  
V
ON/OFF pin  
6, 7  
VSH  
VIN = VOUT(S)  
VIN = VOUT(S)  
+
+
1.0 V, RL = 1.0 k  
Ω
Ω
⎯
V
V
input voltage “H”  
ON/OFF pin  
6, 7  
6, 7  
6, 7  
VSL  
ISH  
ISL  
1.0 V, RL = 1.0 k  
⎯
⎯
0.3  
input voltage “L”  
A/ C type  
1.0  
2.5  
⎯
4.2  
0.1  
4.2  
0.1  
μ
A
A
A
A
ON/OFF pin  
VIN = 6.5 V, VON/OFF = 6.5 V  
VIN = 6.5 V, VON/OFF = 0 V  
input current “H”  
B/ D/ E/ F/ G/ H type  
E/ G type  
−
0.1  
μ
μ
μ
1.0  
2.5  
ON/OFF pin  
input current “L”  
A/ B/ C/ D/ F/ H type  
−
0.1  
⎯
V
IN = VOUT(S)  
+ 1.0 V, f = 1.0 kHz,  
RR  
8, 9  
4, 5  
Ripple rejection  
⎯
70  
⎯
⎯
dB  
ΔVrip = 0.5 Vrms, IOUT = 30 mA  
Short-circuit current  
Ishort  
VIN = VOUT(S)  
+
1.0 V, ON/OFF pin = ON, VOUT = 0 V  
⎯
170  
mA  
S-1711 Series A/B/E/F type (With discharge shunt function)  
Test  
Item  
Symbol  
Condition  
Min.  
Typ.  
100  
Max.  
Unit  
Circuit  
Discharge shunt resistance  
during power-off  
RLOW  
VOUT = 0.1 V, VIN = 6.5 V  
⎯
⎯
Ω
4, 5  
S-1711 Series A/C/E/G type (With pull-up/pull-down resistor)  
Test  
Item  
Symbol  
Condition  
Min.  
1.0  
Typ.  
2.6  
Max.  
5.0  
Unit  
Circuit  
Power-off  
pull-up/pull-down  
resistor  
RPD  
⎯
M
Ω
6, 7  
16  
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
*1. VOUT(S): Set output voltage  
VOUT(E): Actual output voltage  
Output voltage when fixing IOUT(=30 mA) and inputting VOUT(S) + 1.0 V  
*2. The output current at which the output voltage becomes 95% of VOUT(E) after gradually increasing the output current.  
*3. Vdrop = VIN1 − (VOUT3 × 0.98)  
VOUT3 is the output voltage when VIN = VOUT(S) + 1.0 V and IOUT = 150 mA.  
VIN1 is the input voltage at which the output voltage becomes 98% of VOUT3 after gradually decreasing the input  
voltage.  
*4. A change in the temperature of the output voltage [mV/°C] is calculated using the following equation.  
ΔVOUT  
ΔTa  
ΔVOUT  
ΔTa • VOUT  
mV/°C *1 = VOUT(S) V *2  
×
ppm/°C *3 ÷ 1000  
[ ]  
[
]
[ ]  
*1. Change in temperature of output voltage  
*2. Set output voltage  
*3. Output voltage temperature coefficient  
*5. The output current can be at least this value.  
Due to restrictions on the package power dissipation, this value may not be satisfied. Attention should be paid to the  
power dissipation of the package when the output current is large.  
This specification is guaranteed by design.  
17  
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
Test Circuits  
+
1.  
A
VIN  
VOUT2 VOUT1  
ON/OFF2 ON/OFF1  
*1  
*1  
VSS  
*1. Set to VIN or GND  
Figure 12  
2.  
+
A
VIN  
VOUT2 VOUT1  
+
V
ON/OFF2 ON/OFF1  
*1  
*2  
VSS  
*1. Set to OFF  
*2. Set to ON  
Figure 13  
3.  
+
A
VIN  
VOUT1  
VOUT2  
+
ON/OFF2 ON/OFF1  
V
*1  
*2  
VSS  
*1. Set to ON  
*2. Set to OFF  
Figure 14  
4.  
VIN  
VOUT1  
A
VOUT2  
+
V
ON/OFF2 ON/OFF1  
VSS  
*1  
*2  
*1. Set to OFF  
*2. Set to VIN or GND  
Figure 15  
5.  
VIN  
A
VOUT2 VOUT1  
+
ON/OFF2 ON/OFF1  
V
VSS  
*1  
*2  
*1. Set to VIN or GND  
*2. Set to OFF  
Figure 16  
18  
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
6.  
VIN  
VOUT2 VOUT1  
+
+
V
A
ON/OFF2 ON/OFF1  
RL  
*1  
VSS  
*1. Set to OFF  
Figure 17  
7.  
VIN  
VOUT2 VOUT1  
+
+
A
ON/OFF2 ON/OFF1  
RL  
V
*1  
*2  
*2  
VSS  
*1. Set to OFF  
Figure 18  
8.  
VIN  
VOUT1  
VOUT2  
+
V
ON/OFF2 ON/OFF1  
RL  
*1  
VSS  
*1. Set to OFF  
*2. Set to ON  
Figure 19  
9.  
VIN  
VOUT2 VOUT1  
+
V
ON/OFF2 ON/OFF1  
RL  
*1  
VSS  
*1. Set to ON  
*2. Set to OFF  
Figure 20  
19  
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
Standard Circuit  
Input  
Output 1  
Output 2  
VOUT1  
VOUT2  
VIN  
ON/OFF1  
*1  
ON/OFF2  
*2  
CIN  
CL1  
VSS  
*2  
CL2  
Single GND  
*1. CIN is a capacitor for stabilizing the input.  
GND  
*2. A ceramic capacitor of 1.0 μF or more can be used for CL1 and CL2.  
Figure 21  
Caution The above connection diagram and constants will not guarantee successful operation. Perform  
thorough evaluation using the actual application to set the constants.  
Condition of Application  
Input capacitor (CIN):  
Output capacitor (CL1, CL2):  
ESR of output capacitor:  
1.0 μF or more  
1.0 μF or more  
1.0 Ω or less  
Caution Generally a series regulator may cause oscillation, depending on the selection of external parts.  
Confirm that no oscillation occurs in the application for which the above capacitors are used.  
Use input/output capacitor which has good temperature characteristics (conforming to the ceramic  
capacitor EIA X5R (JIS B) characteristics).  
Selection of Input and Output Capacitors (CIN, CL1, CL2)  
The S-1711 Series requires an output capacitor between the VOUT and VSS pins for phase compensation. Operation is  
stabilized by a ceramic capacitor with an output capacitance of 1.0 μF or more in the entire temperature range. When  
using an OS capacitor, a tantalum capacitor, or an aluminum electrolytic capacitor, the capacitance must be 1.0 μF or  
more, and the ESR must be 1.0 Ω or less.  
The value of the output overshoot or undershoot transient response varies depending on the value of the output  
capacitor. The required capacitance of the input capacitor differs depending on the application.  
The recommended capacitance for an application is CIN ≥ 1.0 μF, CL1 ≥ 1.0 μF, CL2 ≥ 1.0 μF; however, when selecting  
the output capacitor, perform sufficient evaluation, including evaluation of temperature characteristics, on the actual  
device.  
20  
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
Explanation of Terms  
1. Low dropout voltage regulator  
This voltage regulator has the low dropout voltage due to its built-in low on-resistance transistor.  
2. Low ESR  
A capacitor whose ESR (Equivalent Series Resistance) is low. The S-1711 Series enables use of a low ESR  
capacitor, such as a ceramic capacitor, for the output capacitor CL1, CL2. ESR of 1.0 Ω or less can be used.  
3. Output voltage (VOUT  
)
The accuracy of the output voltage is ensured at 1.0% under the specified conditions of fixed input voltage*1, fixed  
output current, and fixed temperature.  
*1. Differs depending on the product.  
Caution If the above conditions change, the output voltage value may vary and exceed the accuracy range of  
the output voltage. Refer to “Electrical Characteristics” and “Characteristics (Typical Data) (Per  
circuit)” for details.  
ΔVOUT1  
ΔVIN • VOUT  
4. Line regulation  
Indicates the dependency of the output voltage on the input voltage. That is, the values show how much the output  
voltage changes due to a change in the input voltage with the output current remaining unchanged.  
5. Load regulation (ΔVOUT2  
)
Indicates the dependency of the output voltage on the output current. That is, the values show how much the  
output voltage changes due to a change in the output current with the input voltage remaining unchanged.  
6. Dropout voltage (Vdrop  
)
Indicates the difference between input voltage (VIN1) and the output voltage when; decreasing input voltage (VIN)  
gradually until the output voltage has dropped out to the value of 98% of output voltage (VOUT3), which is at VIN  
=
VOUT(S) + 1.0 V.  
Vdrop = VIN1 − (VOUT3 × 0.98)  
21  
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
ΔVOUT  
ΔTa • VOUT  
7. Output voltage temperature coefficient  
The shaded area in Figure 22 is the range where VOUT varies in the operation temperature range when the output  
voltage temperature coefficient is 100 ppm/°C.  
Example of VOUT = 2.8 V typ. product  
VOUT  
[V]  
+0.28 mV/°C  
*1  
VOUT(E)  
−0.28 mV/°C  
−40  
+25  
Ta [°C]  
+85  
*1. VOUT(E) is the value of the output voltage measured at Ta = +25°C.  
Figure 22  
A change in the temperature of the output voltage [mV/°C] is calculated using the following equation.  
ΔVOUT  
ΔTa  
ΔVOUT  
ΔTa • VOUT  
mV/°C *1 = VOUT(S) V *2  
×
ppm/°C *3 ÷ 1000  
[ ]  
[
]
[ ]  
*1. Change in temperature of output voltage  
*2. Set output voltage  
*3. Output voltage temperature coefficient  
22  
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
Operation  
1. Basic operation  
Figure 23 shows the block diagram of the S-1711 Series.  
The error amplifier compares the reference voltage (Vref) with feedback voltage (Vfb), which is the output voltage  
resistance-divided by feedback resistors (Rs and Rf). It supplies the gate voltage necessary to maintain the constant  
output voltage which is not influenced by the input voltage and temperature change, to the output transistor.  
VIN  
*1  
Current  
supply  
Error  
amplifier  
VOUT  
−
+
Vref  
Rf  
Vfb  
Reference voltage  
circuit  
Rs  
VSS  
*1. Parasitic diode  
Figure 23  
2. Output transistor  
In the S-1711 Series, a low on-resistance P-channel MOS FET is used as the output transistor.  
Be sure that VOUT does not exceed VIN + 0.3 V to prevent the voltage regulator from being damaged due to reverse  
current flowing from the VOUT pin through a parasitic diode to the VIN pin, when the potential of VOUT became higher  
than VIN.  
23  
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
3. ON/OFF pin 1 and 2  
These pins start and stop the regulator.  
When the ON/OFF pin is set to OFF level, the entire internal circuit stops operating, and the built-in P-channel MOS  
FET output transistor between the VIN pin and the VOUT pin is turned off, reducing current consumption  
significantly.  
Since the S-1711 Series A/ B/ E/ F type has a built-in discharge shunt circuit to discharge the output capacitance, the  
VOUT pin is forcibly set to VSS level. In the S-1711 Series C/ D/ G/ H type, the VOUT pin is set to VSS level through  
several hundred kΩ internal divided resistors between the VOUT pin and the VSS pin. Note that the current  
consumption increases when a voltage of 0.3 V to VIN − 0.3 V is applied to the ON/OFF pin.  
The ON/OFF pin is configured as shown in Figure 24 and Figure 25. In the S-1711 Series A/ C/ E/ G type, the  
ON/OFF pin is internally pulled up or pulled down to the VSS pin in the floating status, so the VOUT pin is set to the  
VSS level. In the S-1711 Series B/ D/ F/ H type, the ON/OFF pin is not internally pulled up or pulled down, so do not  
use the ON/OFF pin in the floating status. When not using the ON/OFF pin, connect it to the VIN pin in the product  
B/ D type, and connect it to the VSS pin in F/ H type.  
Table 14  
Product Type  
A/ B/ C/ D  
A/ B/ C/ D  
E/ F/ G/ H  
E/ F/ G/ H  
ON/OFF Pin  
“H”: ON  
Internal Circuit  
Operate  
Stop  
VOUT Pin Voltage  
Set value  
Current Consumption  
*1  
ISS1  
“L”: OFF  
“H”: OFF  
“L”: ON  
VSS level  
ISS2  
ISS2  
Stop  
VSS level  
*1  
Operate  
Set value  
ISS1  
*1. Note that the IC’s current consumption increases as much as current flows into the pull-up/pull-down  
resistor when; the ON/OFF pin is connected to the VIN pin in the A/ C type, the ON/OFF pin is connected to  
the VSS pin in the E/ G type (Refer to Figure 24).  
(1) S-1711 Series A/ C/ E/ G Type  
(2) S-1711 Series B/ D/ F/ H Type  
VIN  
VIN  
E/G type  
ON/OFF  
ON/OFF  
A/C type  
VSS  
VSS  
Figure 24  
Figure 25  
24  
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
4. Discharge shunt function (S-1711 Series A/ B/ E/ F type)  
The S-1711 Series A/ B/ E/ F type has a built-in discharge shunt circuit to discharge the output capacitance. When  
the ON/OFF pin is set to OFF level, turns the output transistor off, and turns the discharge shunt circuit on so that the  
output capacitor discharges. These types allow the VOUT pin to reach VSS level faster than the S-1711 Series  
C / D / G / H type that does not have a discharge shunt circuit.  
Output transistor : OFF  
S-1711 Series  
*1  
VOUT  
VIN  
Discharge shunt circuit  
: ON  
Output  
capacitor  
*1  
(CL)  
ON/OFF  
ON/OFF circuit  
ON/OFF Pin: OFF  
Current flow  
GND  
VSS  
*1. Parasitic diode  
Figure 26  
5. Pull-down/pull-up resistor (S-1711 Series A/ C/ E/ G type)  
In the S-1711 Series A/ C/ E/ G type, the ON/OFF pin is internally pulled up to the VIN pin or pulled down to the VSS  
pin in the floating status, so the VOUT pin is set to the VSS level.  
Note that the IC’s current consumption increases as much as current flows into the pull-up / pull-down resistor when;  
the ON / OFF pin is connected to the VIN pin in the A / C type, the ON / OFF pin is connected to the VSS pin in the  
E / G type.  
25  
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
Precautions  
•
Wiring patterns for the VIN pin, the VOUT pin and GND should be designed so that the impedance is low. When  
mounting an output capacitor between the VOUT pin and the VSS pin (CL1, CL2) and a capacitor for stabilizing the  
input between the VIN pin and the VSS pin (CIN), the distance from the capacitors to these pins should be as short  
as possible.  
•
•
•
Note that generally the output voltage may increase when a series regulator is used at low load current (1.0 mA or  
less).  
Note that generally the output voltage may increase due to the leakage current from an output driver when a series  
regulator is used at high temperature.  
Generally a series regulator may cause oscillation, depending on the selection of external parts. The following  
conditions are recommended for the S-1711 Series. However, be sure to perform sufficient evaluation under the  
actual usage conditions for selection, including evaluation of temperature characteristics.  
Input capacitor (CIN):  
Output capacitor (CL1, CL2):  
Equivalent series resistance (ESR):  
1.0 μF or more  
1.0 μF or more  
1.0 Ω or less  
Use input/output capacitor which has good temperature characteristics (conforming to the ceramic capacitor EIA  
X5R (JIS B) characteristics).  
•
•
•
•
•
•
The voltage regulator may oscillate when the impedance of the power supply is high and the input capacitance is  
small or an input capacitor is not connected.  
If the output capacitance is small, power supply’s fluctuation and the characteristics of load fluctuation become  
worse. Sufficiently evaluate the output voltage’s fluctuation with the actual device.  
Overshoot may occur in the output voltage momentarily if the voltage is rapidly raised at power-on or when the power  
supply fluctuates. Sufficiently evaluate the output voltage at power-on with the actual device.  
The application conditions for the input voltage, the output voltage, and the load current should not exceed the  
package power dissipation.  
Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic  
protection circuit.  
In determining the output current, attention should be paid to the output current value specified in Table 13 in  
“Electrical Characteristics” and footnote *5 of the table.  
• ABLIC Inc. claims no responsibility for any disputes arising out of or in connection with any infringement by products  
including this IC of patents owned by a third party.  
26  
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
Characteristics (Typical Data) (Per circuit)  
1. Output Voltage vs. Output Current (When Load Current Increases) (Ta = 25°C)  
VOUT = 1.5 V  
VOUT = 3.0 V  
2.0  
4.0  
3.5  
3.0  
2.5  
2.0  
1.5  
1.0  
0.5  
0
1.5  
1.0  
0.5  
0
VIN = 1.8 V  
2.0 V  
V
IN = 3.3 V  
3.5 V  
2.5 V  
4.0 V  
6.5 V  
6.5 V  
0
100  
200  
300  
400  
0
100  
200  
300  
400  
I
OUT [mA]  
IOUT [mA]  
VOUT = 5.0 V  
6
5
4
3
2
1
0
VIN = 5.3 V  
5.5 V  
Remark In determining the output current, attention should  
be paid to the following.  
6.0 V  
1. The minimum output current value and  
footnote *5 specified in Table 13 in the  
“Electrical Characteristics”  
6.5 V  
2. The package power dissipation  
0
100  
200  
300  
400  
I
OUT [mA]  
2. Output Voltage vs. Input Voltage (Ta = 25°C)  
VOUT = 1.5 V  
VOUT = 3.0 V  
1.6  
3.1  
1.5  
3.0  
2.9  
1.4  
IOUT = 1 mA  
IOUT = 30 mA  
IOUT = 50 mA  
IOUT = 1 mA  
IOUT = 30 mA  
IOUT = 50 mA  
1.3  
2.8  
2.7  
2.6  
2.5  
1.2  
1.1  
1.0  
1.0  
1.5  
2.0  
2.5  
3.0  
3.5  
2.5  
3.0  
3.5  
4.0  
4.5  
5.0  
VIN [V]  
VIN [V]  
VOUT = 5.0 V  
5.5  
5.0  
4.5  
4.0  
3.5  
3.0  
2.5  
IOUT = 1 mA  
IOUT = 30 mA  
IOUT = 50 mA  
2.0  
3.0  
4.0  
5.0  
6.0  
7.0  
VIN [V]  
27  
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
3. Dropout Voltage vs. Output Current  
VOUT = 1.5 V  
0.40  
VOUT = 3.0 V  
0.25  
0.35  
0.30  
0.25  
0.20  
0.15  
0.10  
0.05  
0.20  
0.15  
0.10  
0.05  
0
85 °C  
25 °C  
85 °C  
25 °C  
-40 °C  
-40 °C  
0
0
50  
100  
150  
200  
0
50  
100  
150  
200  
I
OUT [mA]  
IOUT [mA]  
VOUT = 5.0 V  
0.18  
0.16  
0.14  
0.12  
0.10  
0.08  
0.06  
0.04  
0.02  
0
85 °C  
25 °C  
-40 °C  
0
50  
100  
150  
200  
I
OUT [mA]  
4. Dropout Voltage vs. Set Output Voltage  
0.35  
150 mA  
0.30  
0.25  
0.20  
0.15  
0.10  
0.05  
0
100 mA  
80 mA  
50 mA  
30 mA  
10 mA  
0
1
2
3
4
5
6
VOUT(S) [V]  
28  
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
5. Output Voltage vs. Ambient Temperature  
VOUT = 1.5 V  
VOUT = 3.0 V  
3.20  
1.60  
3.15  
3.10  
3.05  
3.00  
2.95  
2.90  
2.85  
2.80  
1.55  
1.50  
1.45  
1.40  
-40 -25  
0
25  
50  
75 85  
-40 -25  
0
25  
50  
75 85  
Ta [°C  
]
Ta [°C]  
VOUT = 5.0 V  
5.3  
5.2  
5.1  
5.0  
4.9  
4.8  
4.7  
-40 -25  
0
25  
50  
75 85  
Ta [°C  
]
6. Current Consumption vs. Input Voltage  
VOUT = 1.5 V  
VOUT = 3.0 V  
100  
90  
100  
90  
80  
70  
60  
50  
40  
30  
20  
10  
0
80  
70  
60  
85 °C  
50  
40  
25 °C  
85 °C  
25 °C  
-40 °C  
30  
20  
-40 °C  
10  
0
0
1
2
3
4
5
6
7
0
1
2
3
4
5
6
7
VIN [V]  
VIN [V]  
VOUT = 5.0 V  
100  
90  
80  
70  
60  
50  
40  
30  
20  
10  
0
25 °C  
85 °C  
-40 °C  
0
1
2
3
4
5
6
7
VIN [V]  
29  
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
7. Ripple Rejection (Ta = 25°C)  
VOUT = 1.5 V  
VOUT = 3.0 V  
VIN = 2.5 V, CLn = 1.0 μF  
VIN = 4.0 V, CLn = 1.0 μF  
100  
80  
60  
40  
20  
0
100  
80  
60  
40  
20  
0
I
OUT = 1 mA  
I
I
I
OUT = 1 mA  
OUT = 30 mA  
OUT = 150 mA  
I
OUT = 30 mA  
I
OUT = 150 mA  
10  
100  
1k  
10k  
100k  
1M  
10  
100  
1k  
10k  
100k  
1M  
Frequency [Hz]  
Frequency [Hz]  
VOUT = 5.0 V  
VIN = 6.0 V, CLn = 1.0 μF  
100  
80  
60  
40  
20  
0
I
OUT = 1 mA  
I
OUT = 30 mA  
I
OUT = 150 mA  
10  
100  
1k  
10k  
100k  
1M  
Frequency [Hz]  
Remark CLn: Output capacitor set to the VOUTn pin externally (n = 1, 2)  
30  
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
Reference Data (Per circuit)  
1. Input Transient Response Characteristics (Ta = 25°C) Common to VR1 and 2  
VOUT = 1.5 V  
OUT = 30 mA, tr = tf = 5.0 μs, CLn = 1.0 μF, CIN = 1.0 μF  
VOUT = 3.0 V  
IOUT = 30 mA, tr = tf = 5.0 μs, CLn = 1.0 μF, CIN = 1.0 μF  
I
4.0  
3.5  
3.0  
2.5  
2.0  
1.5  
1.0  
0.5  
0
1.56  
1.55  
1.54  
1.53  
1.52  
1.51  
1.50  
1.49  
1.48  
3.04  
3.03  
3.02  
3.01  
3.00  
2.99  
2.98  
6
5
4
3
2
V
IN  
V
IN  
V
OUT  
V
OUT  
1
0
-40 -20  
0
20 40 60 80 100 120 140  
-40 -20  
0
20 40 60 80 100 120 140  
t [μs]  
t [μs]  
VOUT = 5.0 V  
OUT = 30 mA, tr = tf = 5.0 μs, CLn = 1.0 μF, CIN = 1.0 μF  
I
5.06  
5.05  
5.04  
5.03  
5.02  
5.01  
5.00  
4.99  
4.98  
8
7
6
5
4
3
2
1
0
V
IN  
V
OUT  
-40 -20  
0
20 40 60 80 100 120 140  
t [μs]  
2. Load Transient Response Characteristics (Ta = 25°C)  
VOUT = 1.5 V  
VOUT = 3.0 V  
VIN = 2.5 V, CLn = 1.0 μF, CIN = 1.0 μF, IOUT = 50 mA ↔ 100 mA VIN = 4.0 V, CLn = 1.0 μF, CIN = 1.0 μF, IOUT = 50 mA ↔ 100 mA  
1.70  
1.65  
1.60  
1.55  
1.50  
1.45  
1.40  
150  
100  
50  
3.20  
3.15  
3.10  
3.05  
3.00  
2.95  
2.90  
150  
100  
50  
I
OUT  
I
OUT  
0
0
V
OUT  
V
OUT  
-50  
-100  
-150  
-50  
-100  
-150  
-20 -10  
0
10 20 30 40 50 60 70  
-20 -10  
0
10 20 30 40 50 60 70  
t [μs]  
t [μs]  
VOUT = 5.0 V  
VIN =6.0 V, CLn = 1.0 μF, CIN = 1.0 μF, IOUT = 50 mA ↔ 100 mA  
5.20  
5.15  
5.10  
5.05  
5.00  
4.95  
4.90  
150  
100  
50  
I
OUT  
0
V
OUT  
-50  
-100  
-150  
-20 -10  
0
10 20 30 40 50 60 70  
t [μs]  
Remark CLn: Output capacitor set to the VOUTn pin externally (n = 1, 2)  
31  
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
3. ON / OFF Pin Transient Response Characteristics (Ta = 25°C)  
VOUT = 1.5 V  
VOUT = 3.0 V  
V
IN = 2.5 V, CLn = 1.0 μF, CIN = 1.0 μF, IOUT = 100 mA  
V
IN = 4.0 V, CLn = 1.0 μF, CIN = 1.0 μF, IOUT = 100 mA  
3.5  
3.0  
2.5  
2.0  
1.5  
1.0  
0.5  
0
3
7
6
5
6
2
1
0
-1  
-2  
-3  
-4  
-5  
4
2
VON/OFF  
VON/OFF  
4
0
3
2
1
0
-2  
-4  
-6  
-8  
-10  
VOUT  
VOUT  
-0.5  
-1  
-50  
0
50  
100  
t [μs]  
150  
200  
-50  
0
50  
100  
t [μs]  
150  
200  
VOUT = 5.0 V  
V
IN = 6.0 V, CLn = 1.0 μF, CIN = 1.0 μF, IOUT = 100 mA  
17.5  
15.0  
12.5  
10.0  
7.5  
8
6
4
2
0
VON/OFF  
5.0  
2.5  
0
-2.5  
-2  
-4  
-6  
-8  
VOUT  
-50  
0
50  
100  
t [μs]  
150  
200  
4. Output Capacitance vs. Discharge Time Characteristics (Ta = 25°C)  
S-1711 Series A / B type (with discharge shunt function)  
VIN = VOUT + 1.0 V, IOUT = no load,  
VON/OFF = VOUT + 1.0 V → VSS, tf = 1 μs  
1 μs  
VON/OFF  
3.5  
3.0  
2.5  
2.0  
VSS  
V
V
V
OUT(S) = 5.0 V  
tDSC  
1.5  
1.0  
0.5  
0
OUT(S) = 3.0 V  
VOUT  
OUT(S) = 1.5 V  
0
2
4
6
8
10  
12  
VOUT  
× 10%  
CLn [μF]  
V
IN = VOUT + 1.0 V  
V
ON/OFF = VOUT + 1.0 V → VSS  
Figure 27  
Figure 28 Measurement Condition of Discharge Time  
Remark CLn: Output capacitor set to the VOUTn pin externally (n = 1, 2)  
32  
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
Marking Specifications  
1. SNT-6A  
Top view  
(1) to (3) : Product code (Refer to Product name vs. Product code)  
(4) to (6) : Lot number  
6
5
4
(1) (2) (3)  
(4) (5) (6)  
1
2
3
Product name vs. Product code  
(a) S-1711 Series A type  
Product code  
(2)  
Product code  
(2)  
Product Name  
Product Name  
(1)  
(3)  
A
D
T
I
(1)  
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
(3)  
9
S-1711A1515-I6T1U  
S-1711A1518-I6T1U  
S-1711A1526-I6T1U  
S-1711A1528-I6T1U  
S-1711A152J-I6T1U  
S-1711A1533-I6T1U  
S-1711A1815-I6T1U  
S-1711A1818-I6T1U  
S-1711A1827-I6T1U  
S-1711A182H-I6T1U  
S-1711A1828-I6T1U  
S-1711A182J-I6T1U  
S-1711A1829-I6T1U  
S-1711A1830-I6T1U  
S-1711A1833-I6T1U  
S-1711A1J28-I6T1U  
S-1711A2332-I6T1U  
S-1711A2333-I6T1U  
S-1711A2424-I6T1U  
S-1711A2425-I6T1U  
S-1711A2515-I6T1U  
S-1711A2518-I6T1U  
S-1711A2525-I6T1U  
S-1711A2528-I6T1U  
S-1711A2533-I6T1U  
S-1711A2626-I6T1U  
S-1711A2628-I6T1U  
S-1711A2629-I6T1U  
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
R
Q
V
V
Q
V
R
V
R
R
R
V
V
V
R
R
V
V
R
R
R
R
R
V
V
V
V
V
S-1711A2630-I6T1U  
S-1711A2815-I6T1U  
S-1711A2818-I6T1U  
S-1711A2828-I6T1U  
S-1711A2829-I6T1U  
S-1711A2830-I6T1U  
S-1711A2831-I6T1U  
S-1711A2832-I6T1U  
S-1711A2833-I6T1U  
S-1711A2J15-I6T1U  
S-1711A2J18-I6T1U  
S-1711A2J2J-I6T1U  
S-1711A2J33-I6T1U  
S-1711A2929-I6T1U  
S-1711A3015-I6T1U  
S-1711A3018-I6T1U  
S-1711A3025-I6T1U  
S-1711A3028-I6T1U  
S-1711A3030-I6T1U  
S-1711A3033-I6T1U  
S-1711A3128-I6T1U  
S-1711A3318-I6T1U  
S-1711A3333-I6T1U  
S-1711A3348-I6T1U  
S-1711A3350-I6T1U  
S-1711A3434-I6T1U  
S-1711A5025-I6T1U  
S-1711A5030-I6T1U  
V
R
R
R
R
R
Q
R
R
Q
Q
R
Q
R
R
R
R
V
R
R
Q
V
R
V
V
V
V
R
U
V
B
2
I
W
Y
F
P
Q
5
D
A
F
G
F
G
H
C
J
S
L
H
7
X
W
M
Z
Z
U
V
R
S
L
K
N
B
R
3
E
T
D
E
M
7
J
2
6
3
8
8
33  
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
(b) S-1711 Series B type  
(d) S-1711 Series D type  
Product code  
(2)  
Product code  
(2)  
Product Name  
Product Name  
(1)  
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
(3)  
H
C
K
B
J
(1)  
Q
Q
Q
Q
Q
Q
Q
(3)  
N
R
O
P
S-1711B1518-I6T1U  
S-1711B1528-I6T1U  
S-1711B1825-I6T1U  
S-1711B1828-I6T1U  
S-1711B1833-I6T1U  
S-1711B2518-I6T1U  
S-1711B2528-I6T1U  
S-1711B2815-I6T1U  
S-1711B2818-I6T1U  
S-1711B2828-I6T1U  
S-1711B2833-I6T1U  
S-1711B3033-I6T1U  
S-1711B3333-I6T1U  
U
Z
S-1711D1828-I6T1U  
S-1711D1925-I6T1U  
S-1711D2518-I6T1U  
S-1711D2528-I6T1U  
S-1711D252J-I6T1U  
S-1711D2815-I6T1U  
S-1711D2J2J-I6T1U  
U
U
U
U
U
U
U
U
U
U
U
U
U
U
U
Z
Y
A
C
D
E
F
Q
U
D
A
B
Z
Z
(c) S-1711 Series C type  
(e) S-1711 Series E type  
Product Name  
Product code  
(2)  
Product code  
Product Name  
(1)  
(3)  
(1)  
Q
(2)  
T
(3)  
A
S-1711C1515-I6T1U  
S-1711C1815-I6T1U  
S-1711C1827-I6T1U  
S-1711C182H-I6T1U  
S-1711C1828-I6T1U  
S-1711C1J28-I6T1U  
S-1711C2424-I6T1U  
S-1711C2425-I6T1U  
S-1711C2515-I6T1U  
S-1711C2518-I6T1U  
S-1711C2525-I6T1U  
S-1711C2815-I6T1U  
S-1711C2818-I6T1U  
S-1711C2828-I6T1U  
S-1711C2829-I6T1U  
S-1711C2830-I6T1U  
S-1711C2833-I6T1U  
S-1711C2J2J-I6T1U  
S-1711C2929-I6T1U  
S-1711C3015-I6T1U  
S-1711C3018-I6T1U  
S-1711C3025-I6T1U  
S-1711C3030-I6T1U  
S-1711C3033-I6T1U  
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
A
B
C
D
Z
S-1711E2818-I6T1U  
(f) S-1711 Series F type  
Product Name  
Product code  
E
F
(1)  
Q
(2)  
T
(3)  
F
S-1711F2818-I6T1U  
G
H
I
(g) S-1711 Series G type  
Product Name  
J
Product code  
K
L
(1)  
Q
(2)  
T
(3)  
K
S-1711G2830-I6T1U  
M
N
O
P
Q
R
S
T
U
V
W
34  
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
2. SOT-23-6  
Top view  
(1) to (3): Product code (Refer to Product name vs. Product code)  
6
5
4
(4):  
Lot number  
(1) (2) (3) (4)  
1
2
3
Product name vs. Product code  
(a) S-1711 Series A type  
Product code  
Product code  
(2)  
Product Name  
Product Name  
(1)  
(2)  
R
V
V
V
R
V
R
R
R
R
V
V
V
V
R
R
V
R
R
R
R
V
R
V
R
V
V
(3)  
A
I
(1)  
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
(3)  
5
S-1711A1515-M6T1x  
S-1711A1528-M6T1x  
S-1711A1529-M6T1x  
S-1711A1533-M6T1x  
S-1711A1815-M6T1x  
S-1711A1818-M6T1x  
S-1711A1825-M6T1x  
S-1711A1827-M6T1x  
S-1711A182H-M6T1x  
S-1711A1828-M6T1x  
S-1711A182J-M6T1x  
S-1711A1829-M6T1x  
S-1711A1830-M6T1x  
S-1711A1832-M6T1x  
S-1711A1833-M6T1x  
S-1711A1J28-M6T1x  
S-1711A2045-M6T1x  
S-1711A2424-M6T1x  
S-1711A2425-M6T1x  
S-1711A2515-M6T1x  
S-1711A2518-M6T1x  
S-1711A2522-M6T1x  
S-1711A2525-M6T1x  
S-1711A2528-M6T1x  
S-1711A2529-M6T1x  
S-1711A2533-M6T1x  
S-1711A2618-M6T1x  
Remark 1. x: G or U  
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
S-1711A2718-M6T1x  
S-1711A2815-M6T1x  
S-1711A2818-M6T1x  
S-1711A2819-M6T1x  
S-1711A2825-M6T1x  
S-1711A2828-M6T1x  
S-1711A2829-M6T1x  
S-1711A2830-M6T1x  
S-1711A2832-M6T1x  
S-1711A2833-M6T1x  
S-1711A2J2J-M6T1x  
S-1711A2J30-M6T1x  
S-1711A2929-M6T1x  
S-1711A2933-M6T1x  
S-1711A3015-M6T1x  
S-1711A3018-M6T1x  
S-1711A3025-M6T1x  
S-1711A3030-M6T1x  
S-1711A3033-M6T1x  
S-1711A3325-M6T1x  
S-1711A3328-M6T1x  
S-1711A3330-M6T1x  
S-1711A3333-M6T1x  
S-1711A3348-M6T1x  
S-1711A4020-M6T1x  
S-1711A5025-M6T1x  
V
R
R
V
V
R
R
R
R
R
R
V
R
V
R
R
R
R
R
V
V
R
R
V
V
V
U
V
P
C
B
2
K
W
Y
F
4
P
Q
5
D
F
G
H
X
J
S
L
H
N
7
Y
X
W
M
K
N
A
B
6
Z
G
R
S
L
E
O
T
D
9
3
J
Q
3
E
4
2. Please select products of environmental code = U for Sn 100%, halogen-free products.  
35  
6.5 V INPUT, 150 mA, 2-CIRCUIT VOLTAGE REGULATOR  
S-1711 Series  
Rev.3.2_00  
(b) S-1711 Series B type  
(d) S-1711 Series D type  
Product code  
Product code  
(2)  
Product Name  
Product Name  
(1)  
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
(2)  
U
U
U
U
U
U
U
U
U
Z
(3)  
H
I
K
B
M
J
G
A
C
G
H
D
E
L
(1)  
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
(3)  
S
W
N
T
R
O
P
S-1711B1518-M6T1x  
S-1711B1529-M6T1x  
S-1711B1825-M6T1x  
S-1711B1828-M6T1x  
S-1711B1832-M6T1x  
S-1711B1833-M6T1x  
S-1711B2515-M6T1x  
S-1711B2518-M6T1x  
S-1711B2528-M6T1x  
S-1711B2618-M6T1x  
S-1711B2718-M6T1x  
S-1711B2815-M6T1x  
S-1711B2818-M6T1x  
S-1711B2825-M6T1x  
S-1711B2828-M6T1x  
S-1711B3030-M6T1x  
S-1711B3033-M6T1x  
S-1711B3036-M6T1x  
S-1711B3333-M6T1x  
S-1711D1825-M6T1x  
S-1711D1826-M6T1x  
S-1711D1828-M6T1x  
S-1711D1832-M6T1x  
S-1711D1925-M6T1x  
S-1711D2518-M6T1x  
S-1711D2528-M6T1x  
S-1711D2629-M6T1x  
S-1711D2815-M6T1x  
S-1711D4230-M6T1x  
U
U
U
U
U
U
U
U
U
U
X
Q
V
Z
U
U
U
U
Z
Z
Z
Z
F
I
A
F
B
(c) S-1711 Series C type  
(e) S-1711 Series E type  
Product code  
Product code  
Product Name  
Product Name  
(1)  
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
(2)  
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
(3)  
A
B
2
(1)  
Q
Q
(2)  
T
T
(3)  
C
A
S-1711C1515-M6T1x  
S-1711C1815-M6T1x  
S-1711C1825-M6T1x  
S-1711C1827-M6T1x  
S-1711C182H-M6T1x  
S-1711C1832-M6T1x  
S-1711C1J28-M6T1x  
S-1711C2424-M6T1x  
S-1711C2425-M6T1x  
S-1711C2515-M6T1x  
S-1711C2518-M6T1x  
S-1711C2525-M6T1x  
S-1711C2815-M6T1x  
S-1711C2818-M6T1x  
S-1711C2828-M6T1x  
S-1711C2829-M6T1x  
S-1711C2830-M6T1x  
S-1711C2833-M6T1x  
S-1711C2J2J-M6T1x  
S-1711C2929-M6T1x  
S-1711C3015-M6T1x  
S-1711C3018-M6T1x  
S-1711C3025-M6T1x  
S-1711C3030-M6T1x  
S-1711C3033-M6T1x  
S-1711C3131-M6T1x  
Remark 1. x: G or U  
S-1711E1833-M6T1x  
S-1711E2818-M6T1x  
S-1711E3333-M6T1x  
Q
T
B
C
D
X
E
F
(f) S-1711 Series H type  
Product Name  
Product code  
(1)  
Q
(2)  
T
(3)  
P
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
Y
S-1711H2518-M6T1x  
2. Please select products of environmental code = U for Sn 100%, halogen-free products.  
36  
1.57±0.03  
6
5
4
+0.05  
-0.02  
0.08  
1
2
3
0.5  
0.48±0.02  
0.2±0.05  
No. PG006-A-P-SD-2.1  
SNT-6A-A-PKG Dimensions  
PG006-A-P-SD-2.1  
TITLE  
No.  
ANGLE  
UNIT  
mm  
ABLIC Inc.  
+0.1  
-0  
ø1.5  
4.0±0.1  
2.0±0.05  
0.25±0.05  
+0.1  
ø0.5  
-0  
4.0±0.1  
0.65±0.05  
1.85±0.05  
3
2
5
1
6
4
Feed direction  
No. PG006-A-C-SD-2.0  
TITLE  
SNT-6A-A-Carrier Tape  
PG006-A-C-SD-2.0  
No.  
ANGLE  
UNIT  
mm  
ABLIC Inc.  
12.5max.  
9.0±0.3  
Enlarged drawing in the central part  
ø13±0.2  
(60°)  
(60°)  
No. PG006-A-R-SD-1.0  
SNT-6A-A-Reel  
TITLE  
No.  
PG006-A-R-SD-1.0  
ANGLE  
UNIT  
5,000  
QTY.  
mm  
ABLIC Inc.  
0.52  
2
1.36  
0.52  
1
0.3  
0.2  
1.  
2.  
(0.25 mm min. / 0.30 mm typ.)  
(1.30 mm ~ 1.40 mm)  
0.03 mm  
SNT  
1. Pay attention to the land pattern width (0.25 mm min. / 0.30 mm typ.).  
2. Do not widen the land pattern to the center of the package ( 1.30 mm ~ 1.40 mm ).  
Caution 1. Do not do silkscreen printing and solder printing under the mold resin of the package.  
2. The thickness of the solder resist on the wire pattern under the package should be 0.03 mm  
or less from the land pattern surface.  
3. Match the mask aperture size and aperture position with the land pattern.  
4. Refer to "SNT Package User's Guide" for details.  
(0.25 mm min. / 0.30 mm typ.)  
(1.30 mm ~ 1.40 mm)  
1.  
2.  
SNT-6A-A  
-Land Recommendation  
TITLE  
No. PG006-A-L-SD-4.1  
No.  
PG006-A-L-SD-4.1  
ANGLE  
UNIT  
mm  
ABLIC Inc.  
2.9±0.2  
1.9±0.2  
6
5
4
+0.1  
-0.05  
1
3
2
0.15  
0.95  
0.95  
0.35±0.15  
No. MP006-A-P-SD-2.1  
TITLE  
SOT236-A-PKG Dimensions  
MP006-A-P-SD-2.1  
No.  
ANGLE  
UNIT  
mm  
ABLIC Inc.  
4.0±0.1(10 pitches:40.0±0.2)  
+0.1  
-0  
2.0±0.05  
0.25±0.1  
ø1.5  
+0.2  
-0  
ø1.0  
4.0±0.1  
1.4±0.2  
3.2±0.2  
3
4
2 1  
6
5
Feed direction  
No. MP006-A-C-SD-3.1  
TITLE  
SOT236-A-Carrier Tape  
MP006-A-C-SD-3.1  
No.  
ANGLE  
UNIT  
mm  
ABLIC Inc.  
12.5max.  
9.0±0.3  
Enlarged drawing in the central part  
ø13±0.2  
(60°)  
(60°)  
No. MP006-A-R-SD-2.1  
TITLE  
SOT236-A-Reel  
MP006-A-R-SD-2.1  
No.  
ANGLE  
UNIT  
QTY  
3,000  
mm  
ABLIC Inc.  
Disclaimers (Handling Precautions)  
1. All the information described herein (product data, specifications, figures, tables, programs, algorithms and  
application circuit examples, etc.) is current as of publishing date of this document and is subject to change without  
notice.  
2. The circuit examples and the usages described herein are for reference only, and do not guarantee the success of  
any specific mass-production design.  
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by the reasons other than the products  
described herein (hereinafter "the products") or infringement of third-party intellectual property right and any other  
right due to the use of the information described herein.  
3. ABLIC Inc. is not liable for any losses, damages, claims or demands caused by the incorrect information described  
herein.  
4. Be careful to use the products within their ranges described herein. Pay special attention for use to the absolute  
maximum ratings, operation voltage range and electrical characteristics, etc.  
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by failures and / or accidents, etc. due to  
the use of the products outside their specified ranges.  
5. Before using the products, confirm their applications, and the laws and regulations of the region or country where they  
are used and verify suitability, safety and other factors for the intended use.  
6. When exporting the products, comply with the Foreign Exchange and Foreign Trade Act and all other export-related  
laws, and follow the required procedures.  
7. The products are strictly prohibited from using, providing or exporting for the purposes of the development of  
weapons of mass destruction or military use. ABLIC Inc. is not liable for any losses, damages, claims or demands  
caused by any provision or export to the person or entity who intends to develop, manufacture, use or store nuclear,  
biological or chemical weapons or missiles, or use any other military purposes.  
8. The products are not designed to be used as part of any device or equipment that may affect the human body, human  
life, or assets (such as medical equipment, disaster prevention systems, security systems, combustion control  
systems, infrastructure control systems, vehicle equipment, traffic systems, in-vehicle equipment, aviation equipment,  
aerospace equipment, and nuclear-related equipment), excluding when specified for in-vehicle use or other uses by  
ABLIC, Inc. Do not apply the products to the above listed devices and equipments.  
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by unauthorized or unspecified use of  
the products.  
9. In general, semiconductor products may fail or malfunction with some probability. The user of the products should  
therefore take responsibility to give thorough consideration to safety design including redundancy, fire spread  
prevention measures, and malfunction prevention to prevent accidents causing injury or death, fires and social  
damage, etc. that may ensue from the products' failure or malfunction.  
The entire system in which the products are used must be sufficiently evaluated and judged whether the products are  
allowed to apply for the system on customer's own responsibility.  
10. The products are not designed to be radiation-proof. The necessary radiation measures should be taken in the  
product design by the customer depending on the intended use.  
11. The products do not affect human health under normal use. However, they contain chemical substances and heavy  
metals and should therefore not be put in the mouth. The fracture surfaces of wafers and chips may be sharp. Be  
careful when handling these with the bare hands to prevent injuries, etc.  
12. When disposing of the products, comply with the laws and ordinances of the country or region where they are used.  
13. The information described herein contains copyright information and know-how of ABLIC Inc. The information  
described herein does not convey any license under any intellectual property rights or any other rights belonging to  
ABLIC Inc. or a third party. Reproduction or copying of the information from this document or any part of this  
document described herein for the purpose of disclosing it to a third-party is strictly prohibited without the express  
permission of ABLIC Inc.  
14. For more details on the information described herein or any other questions, please contact ABLIC Inc.'s sales  
representative.  
15. This Disclaimers have been delivered in a text using the Japanese language, which text, despite any translations into  
the English language and the Chinese language, shall be controlling.  
2.4-2019.07  
www.ablic.com  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
©2020 ICPDF网 联系我们和版权申明