S-19251A28H-A4T6U4 [ABLIC]
AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR;型号: | S-19251A28H-A4T6U4 |
厂家: | ABLIC |
描述: | AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR 输入元件 |
文件: | 总41页 (文件大小:908K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
S-19251 Series
AUTOMOTIVE, 105°C OPERATION,
5.5 V INPUT, 150 mA VOLTAGE REGULATOR
www.ablic.com
© ABLIC Inc., 2017-2018
Rev.1.1_01
The S-19251 Series, developed by using CMOS process technology, is a positive voltage regulator with a low current
consumption, high ripple-rejection and high-accuracy output voltage. This IC has high ripple-rejection of 75 dB typ., and
operates with low current consumption of 20 μA typ.
Also, a built-in overcurrent protection circuit to limit overcurrent of the output transistor and a built-in thermal shutdown circuit
to limit heat are included. In addition to the conventional package SOT-23-5, the super-small packages HSNT-4(1010)B and
HSNT-4(0808)B are added to the lineup, which realizes higher-density mounting.
Caution This product can be used in vehicle equipment and in-vehicle equipment. Before using the product in the
purpose, contact to ABLIC Inc. is indispensable.
Features
• Output voltage:
• Input voltage:
1.0 V to 3.5 V, selectable in 0.05 V step
1.5 V to 5.5 V
• Output voltage accuracy:
• Current consumption:
2.5% (Tj = −40°C to +105°C)
During operation:
20 μA typ., 50 μA max. (Tj = −40°C to +105°C)
0.1 μA typ., 4.5 μA max. (Tj = −40°C to +105°C)
During power-off:
• Dropout voltage:
• Output current:
• Ripple rejection:
0.16 V typ. (2.8 V output product, IOUT = 100 mA)
Possible to output 150 mA (VIN ≥ VOUT(S) + 1.0 V)*1
75 dB typ. (1.2 V output product, f = 1.0 kHz)
70 dB typ. (2.8 V output product, f = 1.0 kHz)
A ceramic capacitor can be used. (1.0 μF or more)
A ceramic capacitor can be used. (1.0 μF or more)
Limits overcurrent of output transistor.
• Input capacitor:
• Output capacitor:
• Built-in overcurrent protection circuit:
• Built-in thermal shutdown circuit:
• Built-in ON / OFF circuit:
Detection temperature 150°C typ.
Ensures long battery life.
Discharge shunt function "available" / "unavailable" is selectable.
Pull-down function "available" / "unavailable" is selectable.
Ta = −40°C to +105°C
• Operation temperature range:
• Lead-free (Sn 100%), halogen-free
• AEC-Q100 qualified*2
*1. Please make sure that the loss of the IC will not exceed the power dissipation when the output current is large.
*2. Contact our sales office for details.
Applications
• For automotive use (meter, car body, headlight, ITS, accessory, car navigation system, car audio system, etc.)
: SOT-23-5 package product
• For automotive use (accessory, car navigation system, car audio system, etc.)
: HSNT-4(1010)B package product, HSNT-4(0808)B package product
Packages
• SOT-23-5
• HSNT-4(1010)B
• HSNT-4(0808)B
1
AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR
Rev.1.1_01
S-19251 Series
Block Diagrams
1. S-19251 Series A type
Function
Status
*1
ON / OFF logic
Discharge shunt
function
Active "H"
VIN
VOUT
Available
Available
Overcurrent
protection circuit
Pull-down resistor
Thermal shutdown circuit
+
−
ON / OFF
ON / OFF circuit
Reference
voltage circuit
*1
VSS
*1. Parasitic diode
Figure 1
2. S-19251 Series B type
Function
Status
*1
ON / OFF logic
Discharge shunt
function
Active "H"
VIN
VOUT
Available
Overcurrent
protection circuit
Pull-down resistor
Unavailable
Thermal shutdown circuit
+
−
ON / OFF
ON / OFF circuit
Reference
voltage circuit
*1
VSS
*1. Parasitic diode
Figure 2
2
AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR
Rev.1.1_01
S-19251 Series
3. S-19251 Series C type
Function
Status
*1
ON / OFF logic
Discharge shunt
function
Active "H"
VIN
VOUT
Unavailable
Overcurrent
protection circuit
Pull-down resistor
Available
Thermal shutdown circuit
+
−
ON / OFF
ON / OFF circuit
Reference
voltage circuit
VSS
*1. Parasitic diode
Figure 3
4. S-19251 Series D type
Function
Status
*1
ON / OFF logic
Discharge shunt
function
Active "H"
VIN
VOUT
Unavailable
Unavailable
Overcurrent
protection circuit
Pull-down resistor
Thermal shutdown circuit
+
−
ON / OFF
ON / OFF circuit
Reference
voltage circuit
VSS
*1. Parasitic diode
Figure 4
3
AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR
Rev.1.1_01
S-19251 Series
AEC-Q100 Qualified
This IC supports AEC-Q100 for operation temperature grade 2.
Contact our sales office for details of AEC-Q100 reliability specification.
Product Name Structure
Users can select the product type, output voltage, and package type for the S-19251 Series. Refer to "1. Product
name" regarding the contents of product name, "2. Function list of product types" regarding the product type,
"3. Packages" regarding the package drawings, "4. Product name list" regarding details of the product name.
1. Product name
S-19251
x
xx
H
-
xxxx
U
4
Environmental code
U:
Lead-free (Sn 100%), halogen-free
Package abbreviation and IC packing specifications*1
M5T1: SOT-23-5, Tape
A4T7: HSNT-4(1010)B, Tape
A4T6: HSNT-4(0808)B, Tape
Operation temperature
H:
Ta = −40°C to +105°C
Set output voltage*2
10 to 35
(e.g., when the set output voltage is 1.0 V, it is expressed as 10.)
Product type*3
A to D
*1. Refer to the tape drawing.
*2. If you request the product which has 0.05 V step, contact our sales office.
*3. Refer to "2. Function list of product types".
2. Function list of product types
Table 1
Product Type
ON / OFF Logic
Active "H"
Discharge Shunt Function
Available
Pull-down Resistor
Available
A
B
C
D
Active "H"
Active "H"
Active "H"
Available
Unavailable
Available
Unavailable
Unavailable
Unavailable
3. Packages
Table 2 Package Drawing Codes
Package Name
SOT-23-5
Dimension
Tape
Reel
Land
−
MP005-A-P-SD
PL004-B-P-SD
PK004-B-P-SD
MP005-A-C-SD
PL004-B-C-SD
PK004-B-C-SD
MP005-A-R-SD
PL004-B-R-SD
PK004-B-R-SD
HSNT-4(1010)B
HSNT-4(0808)B
PL004-B-L-SD
PK004-B-L-SD
4
AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR
Rev.1.1_01
S-19251 Series
4. Product name list
4. 1 S-19251 Series A type
ON / OFF logic:
Discharge shunt function:
Active "H"
Available
Pull-down resistor:
Table 3
Available
HSNT-4(1010)B
HSNT-4(0808)B
Output Voltage
1.0 V 2.5%
1.2 V 2.5%
1.8 V 2.5%
2.0 V 2.5%
2.5 V 2.5%
2.7 V 2.5%
2.8 V 2.5%
2.85 V 2.5%
2.9 V 2.5%
3.0 V 2.5%
3.3 V 2.5%
3.5 V 2.5%
SOT-23-5
S-19251A10H-M5T1U4
S-19251A12H-M5T1U4
S-19251A18H-M5T1U4
S-19251A20H-M5T1U4
S-19251A25H-M5T1U4
S-19251A27H-M5T1U4
S-19251A28H-M5T1U4
S-19251A2JH-M5T1U4
S-19251A29H-M5T1U4
S-19251A30H-M5T1U4
S-19251A33H-M5T1U4
S-19251A35H-M5T1U4
S-19251A10H-A4T7U4 S-19251A10H-A4T6U4
S-19251A12H-A4T7U4 S-19251A12H-A4T6U4
S-19251A18H-A4T7U4 S-19251A18H-A4T6U4
S-19251A20H-A4T7U4 S-19251A20H-A4T6U4
S-19251A25H-A4T7U4 S-19251A25H-A4T6U4
S-19251A27H-A4T7U4 S-19251A27H-A4T6U4
S-19251A28H-A4T7U4 S-19251A28H-A4T6U4
S-19251A2JH-A4T7U4 S-19251A2JH-A4T6U4
S-19251A29H-A4T7U4 S-19251A29H-A4T6U4
S-19251A30H-A4T7U4 S-19251A30H-A4T6U4
S-19251A33H-A4T7U4 S-19251A33H-A4T6U4
S-19251A35H-A4T7U4 S-19251A35H-A4T6U4
Remark Please contact our sales office for products with specifications other than the above.
4. 2 S-19251 Series B type
ON / OFF logic:
Discharge shunt function:
Active "H"
Available
Pull-down resistor:
Table 4
Unavailable
HSNT-4(1010)B
HSNT-4(0808)B
Output Voltage
1.0 V 2.5%
1.2 V 2.5%
1.8 V 2.5%
2.0 V 2.5%
2.5 V 2.5%
2.7 V 2.5%
2.8 V 2.5%
2.85 V 2.5%
2.9 V 2.5%
3.0 V 2.5%
3.3 V 2.5%
3.5 V 2.5%
SOT-23-5
S-19251B10H-M5T1U4
S-19251B12H-M5T1U4
S-19251B18H-M5T1U4
S-19251B20H-M5T1U4
S-19251B25H-M5T1U4
S-19251B27H-M5T1U4
S-19251B28H-M5T1U4
S-19251B2JH-M5T1U4
S-19251B29H-M5T1U4
S-19251B30H-M5T1U4
S-19251B33H-M5T1U4
S-19251B35H-M5T1U4
S-19251B10H-A4T7U4 S-19251B10H-A4T6U4
S-19251B12H-A4T7U4 S-19251B12H-A4T6U4
S-19251B18H-A4T7U4 S-19251B18H-A4T6U4
S-19251B20H-A4T7U4 S-19251B20H-A4T6U4
S-19251B25H-A4T7U4 S-19251B25H-A4T6U4
S-19251B27H-A4T7U4 S-19251B27H-A4T6U4
S-19251B28H-A4T7U4 S-19251B28H-A4T6U4
S-19251B2JH-A4T7U4 S-19251B2JH-A4T6U4
S-19251B29H-A4T7U4 S-19251B29H-A4T6U4
S-19251B30H-A4T7U4 S-19251B30H-A4T6U4
S-19251B33H-A4T7U4 S-19251B33H-A4T6U4
S-19251B35H-A4T7U4 S-19251B35H-A4T6U4
Remark Please contact our sales office for products with specifications other than the above.
5
AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR
Rev.1.1_01
S-19251 Series
4. 3 S-19251 Series C type
ON / OFF logic:
Active "H"
Discharge shunt function:
Unavailable
Pull-down resistor:
Table 5
Available
HSNT-4(1010)B
HSNT-4(0808)B
Output Voltage
1.0 V 2.5%
1.2 V 2.5%
1.8 V 2.5%
2.0 V 2.5%
2.5 V 2.5%
2.7 V 2.5%
2.8 V 2.5%
2.85 V 2.5%
2.9 V 2.5%
3.0 V 2.5%
3.3 V 2.5%
3.5 V 2.5%
SOT-23-5
S-19251C10H-M5T1U4
S-19251C12H-M5T1U4
S-19251C18H-M5T1U4
S-19251C20H-M5T1U4
S-19251C25H-M5T1U4
S-19251C27H-M5T1U4
S-19251C28H-M5T1U4
S-19251C2JH-M5T1U4
S-19251C29H-M5T1U4
S-19251C30H-M5T1U4
S-19251C33H-M5T1U4
S-19251C35H-M5T1U4
S-19251C10H-A4T7U4 S-19251C10H-A4T6U4
S-19251C12H-A4T7U4 S-19251C12H-A4T6U4
S-19251C18H-A4T7U4 S-19251C18H-A4T6U4
S-19251C20H-A4T7U4 S-19251C20H-A4T6U4
S-19251C25H-A4T7U4 S-19251C25H-A4T6U4
S-19251C27H-A4T7U4 S-19251C27H-A4T6U4
S-19251C28H-A4T7U4 S-19251C28H-A4T6U4
S-19251C2JH-A4T7U4 S-19251C2JH-A4T6U4
S-19251C29H-A4T7U4 S-19251C29H-A4T6U4
S-19251C30H-A4T7U4 S-19251C30H-A4T6U4
S-19251C33H-A4T7U4 S-19251C33H-A4T6U4
S-19251C35H-A4T7U4 S-19251C35H-A4T6U4
Remark Please contact our sales office for products with specifications other than the above.
4. 4 S-19251 Series D type
ON / OFF logic:
Active "H"
Discharge shunt function:
Unavailable
Pull-down resistor:
Table 6
Unavailable
HSNT-4(1010)B
HSNT-4(0808)B
Output Voltage
1.0 V 2.5%
1.2 V 2.5%
1.8 V 2.5%
2.0 V 2.5%
2.5 V 2.5%
2.7 V 2.5%
2.8 V 2.5%
2.85 V 2.5%
2.9 V 2.5%
3.0 V 2.5%
3.3 V 2.5%
3.5 V 2.5%
SOT-23-5
S-19251D10H-M5T1U4
S-19251D12H-M5T1U4
S-19251D18H-M5T1U4
S-19251D20H-M5T1U4
S-19251D25H-M5T1U4
S-19251D27H-M5T1U4
S-19251D28H-M5T1U4
S-19251D2JH-M5T1U4
S-19251D29H-M5T1U4
S-19251D30H-M5T1U4
S-19251D33H-M5T1U4
S-19251D35H-M5T1U4
S-19251D10H-A4T7U4 S-19251D10H-A4T6U4
S-19251D12H-A4T7U4 S-19251D12H-A4T6U4
S-19251D18H-A4T7U4 S-19251D18H-A4T6U4
S-19251D20H-A4T7U4 S-19251D20H-A4T6U4
S-19251D25H-A4T7U4 S-19251D25H-A4T6U4
S-19251D27H-A4T7U4 S-19251D27H-A4T6U4
S-19251D28H-A4T7U4 S-19251D28H-A4T6U4
S-19251D2JH-A4T7U4 S-19251D2JH-A4T6U4
S-19251D29H-A4T7U4 S-19251D29H-A4T6U4
S-19251D30H-A4T7U4 S-19251D30H-A4T6U4
S-19251D33H-A4T7U4 S-19251D33H-A4T6U4
S-19251D35H-A4T7U4 S-19251D35H-A4T6U4
Remark Please contact our sales office for products with specifications other than the above.
6
AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR
Rev.1.1_01
S-19251 Series
Pin Configurations
1. SOT-23-5
Top view
Table 7
Pin No.
Symbol
VIN
Description
5
1
4
1
2
3
4
5
Input voltage pin
VSS
GND pin
ON / OFF
NC*1
ON / OFF pin
No connection
Output voltage pin
2
3
VOUT
Figure 5
*1. The NC pin is electrically open.
The NC pin can be connected to the VIN pin or the VSS pin.
2. HSNT-4(1010)B
Top view
Table 8
Pin No.
Symbol
VOUT
Description
1
2
4
3
1
2
3
4
Output voltage pin
GND pin
VSS
ON / OFF
VIN
ON / OFF pin
Input voltage pin
Bottom view
4
3
1
2
*1
Figure 6
*1. Connect the heat sink of backside at shadowed area to the board, and set electric potential GND.
However, do not use it as the function of electrode.
3. HSNT-4(0808)B
Top view
Table 9
Pin No.
Symbol
VOUT
Description
Output voltage pin
1
2
4
3
1
2
3
4
VSS
GND pin
ON / OFF
VIN
ON / OFF pin
Input voltage pin
Bottom view
4
3
1
2
*1
Figure 7
*1. Connect the heat sink of backside at shadowed area to the board, and set electric potential GND.
However, do not use it as the function of electrode.
7
AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR
Rev.1.1_01
S-19251 Series
Absolute Maximum Ratings
Table 10
(Ta = +25°C unless otherwise specified)
Item
Symbol
Absolute Maximum Rating
Unit
V
VIN
VSS − 0.3 to VSS + 6.0
Input voltage
VON / OFF
VOUT
IOUT
VSS − 0.3 to VIN + 0.3
VSS − 0.3 to VIN + 0.3
180
≤
≤
VSS + 6.0
VSS + 6.0
V
Output voltage
V
Output current
mA
°C
°C
°C
Junction temperature
Operation ambient temperature
Storage temperature
Tj
−40 to +125
−40 to +105
−40 to +125
Topr
Tstg
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
Thermal Resistance Value
Table 11
Item
Symbol
Condition
Min.
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
Typ.
192
160
−
−
−
378
317
−
−
−
402
336
−
−
−
Max.
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
Unit
Board A
Board B
Board C
Board D
Board E
Board A
Board B
Board C
Board D
Board E
Board A
Board B
Board C
Board D
Board E
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
SOT-23-5
Junction-to-ambient thermal resistance*1
θJA
HSNT-4(1010)B
HSNT-4(0808)B
*1. Test environment: compliance with JEDEC STANDARD JESD51-2A
Remark Refer to " Power Dissipation" and "Test Board" for details.
8
AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR
Rev.1.1_01
S-19251 Series
Electrical Characteristics
Table 12
(Tj = −40°C to +105°C unless otherwise specified)
Test
Circuit
Item
Symbol
Condition
Min.
Typ.
Max.
Unit
VOUT(S)
VOUT(S)
Output voltage*1
VOUT(E)
VIN = VOUT(S)
VIN VOUT(S)
+
+
1.0 V, IOUT = 30 mA
1.0 V
VOUT(S)
V
1
×
0.975
×
1.025
Output current*2
IOUT
≥
150*4
−
−
mA
V
3
1
1
1
1
1
1
1
1
1
1
1
1.0 V
1.1 V
1.2 V
1.3 V
1.4 V
1.5 V
1.7 V
2.0 V
2.5 V
3.0 V
3.3 V
≤
≤
≤
≤
≤
≤
≤
≤
≤
≤
≤
VOUT(S) < 1.1 V
VOUT(S) < 1.2 V
VOUT(S) < 1.3 V
VOUT(S) < 1.4 V
VOUT(S) < 1.5 V
VOUT(S) < 1.7 V
VOUT(S) < 2.0 V
VOUT(S) < 2.5 V
VOUT(S) < 3.0 V
VOUT(S) < 3.3 V
0.50
−
−
−
−
−
−
−
−
0.68
0.52
0.31
0.28
0.26
0.24
0.22
0.18
0.16
0.15
0.14
0.86
0.71
0.63
0.56
0.50
0.47
0.43
0.36
0.32
0.28
0.27
V
V
V
V
I
OUT = 100 mA,
Dropout voltage*3
Vdrop
V
Ta = 25°C
+
V
V
V
−
−
V
VOUT(S)
≤
3.5 V
V
1.0 V
1.6 V
≤
VOUT(S) < 1.1 V
VIN 5.5 V, IOUT = 30 mA,
25°C
VOUT(S)
0.5 V
25°C
IN = VOUT(S)
Ta = 25°C
≤
≤
−
−
0.02
0.02
0.1
0.1
%/V
1
1
Δ
VOUT1
Ta =
+
Line regulation
Load regulation
1.1 V
≤
≤
≤
3.5 V
VIN
Δ
VIN
• VOUT
VOUT(S)
Ta =
+
≤
5.5 V, IOUT = 30 mA,
%/V
mV
+
V
+
1.0 V, 100 μA ≤ IOUT ≤ 100 mA,
ΔVOUT2
−
−
20
20
40
50
1
2
+
Current consumption
during operation
Current consumption
during power-off
Input voltage
ISS1
VIN = VOUT(S)
VIN = VOUT(S)
+
+
1.0 V, ON / OFF pin = ON, no load
μ
A
A
4.5
5.5
−
ISS2
VIN
1.0 V, ON / OFF pin = OFF, no load
−
0.1
−
μ
2
−
4
−
1.5
1.0
V
V
IN = VOUT(S)
+
1.0 V, RL = 1.0 kΩ
ON / OFF pin input voltage "H" VSH
−
V
V
determined by VOUT output level
V
IN = VOUT(S)
determined by VOUT output level
B / D type
+ 1.0 V, RL = 1.0 kΩ
ON / OFF pin input voltage "L"
ON / OFF pin input current "H"
ON / OFF pin input current "L"
VSL
ISH
ISL
−
−
−
0.25
0.1
4
4
4
4
−
0.1
μ
A
A
A
(without pull-down resistor)
A / C type
(with pull-down resistor)
V
V
IN = 5.5 V,
ON / OFF = 5.5 V
1.0
2.5
−
5.2
μ
μ
VIN = 5.5 V, VON / OFF = 0 V
−
0.1
0.1
1.0 V
≤
VOUT(S)
≤
≤
1.2 V
−
−
−
75
70
65
−
−
−
dB
dB
dB
5
5
5
V
IN = VOUT(S)
f = 1.0 kHz,
Vrip = 0.5 Vrms,
IOUT = 30 mA
+ 1.0 V,
RR
Ripple rejection
1.2 V < VOUT(S)
2.85 V
Δ
2.85 V < VOUT(S)
≤ 3.5 V
V
IN = VOUT(S)
+ 1.0 V, ON / OFF pin = ON, VOUT = 0 V,
Short-circuit current
Ishort
−
−
50
150
120
35
−
−
mA
3
−
−
3
4
Ta = 25°C
+
Thermal shutdown detection
temperature
TSD
Junction temperature
°
°
C
C
Thermal shutdown
release temperature
TSR
Junction temperature
−
−
Discharge shunt resistance
during power-off
V
V
OUT = 0.1 V,
IN = 5.5 V
A / B type
RLOW
−
−
Ω
(with discharge shunt function)
A / C type
Power-off pull-down resistance RPD
−
1.0
2.2
5.5
MΩ
(with pull-down resistor)
9
AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR
Rev.1.1_01
S-19251 Series
*1. VOUT(S): Set output voltage
VOUT(E): Actual output voltage
The output voltage when VIN = VOUT(S) + 1.0 V, IOUT = 30 mA
*2. The output current at which the output voltage becomes 95% of VOUT(E) after gradually increasing the output current.
*3. Vdrop = VIN1 − (VOUT3 × 0.98)
VIN1 is the input voltage at which the output voltage becomes 98% of VOUT3 after gradually decreasing the input
voltage.
VOUT3 is the output voltage when VIN = VOUT(S) + 1.0 V and IOUT = 100 mA.
*4. Due to limitation of the power dissipation, this value may not be satisfied. Attention should be paid to the power
dissipation when the output current is large.
This specification is guaranteed by design.
10
AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR
Rev.1.1_01
S-19251 Series
Test Circuits
+
VOUT
VSS
VIN
A
+
ON / OFF
V
Set to ON
Figure 8 Test Circuit 1
VOUT
VIN
ON / OFF
VSS
+
Set to VIN or GND
A
Figure 9 Test Circuit 2
VOUT
A
VIN
+
ON / OFF
V
VSS
Set to VIN or GND
Figure 10 Test Circuit 3
VOUT
VSS
VIN
+
+
ON / OFF
A
V
RL
Figure 11 Test Circuit 4
VOUT
VSS
VIN
+
ON / OFF
V
RL
Set to ON
Figure 12 Test Circuit 5
11
AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR
Rev.1.1_01
S-19251 Series
Standard Circuit
Input
CIN
Output
VIN
VOUT
*1
*2
ON / OFF
CL
VSS
Single GND
GND
*1.
CIN is a capacitor for stabilizing the input.
*2. CL is a capacitor for stabilizing the output.
Figure 13
Caution The above connection diagram and constant will not guarantee successful operation. Perform
thorough evaluation including the temperature characteristics with an actual application to set the
constant.
Condition of Application
Input capacitor (CIN):
Output capacitor (CL):
A ceramic capacitor with capacitance of 1.0 μF or more is recommended.
A ceramic capacitor with capacitance of 1.0 μF or more is recommended.
Caution Generally, in a voltage regulator, an oscillation may occur depending on the selection of the external
parts. Perform thorough evaluation including the temperature characteristics with an actual
application using the above capacitors to confirm no oscillation occurs.
Selection of Input Capacitor (CIN) and Output Capacitor (CL)
The S-19251 Series requires CL between the VOUT pin and the VSS pin for phase compensation. The operation is
stabilized by a ceramic capacitor with capacitance of 1.0 μF or more. When using an OS capacitor, a tantalum capacitor
or an aluminum electrolytic capacitor, the capacitance also must be 1.0 μF or more. However, an oscillation may occur
depending on the equivalent series resistance (ESR).
Moreover, the S-19251 Series requires CIN between the VIN pin and the VSS pin for a stable operation.
Generally, an oscillation may occur when a voltage regulator is used under the conditon that the impedance of the power
supply is high.
Note that the output voltage transient characteristics varies depending on the capacitance of CIN and CL and the value of
ESR.
Caution Perform thorough evaluation including the temperature characteristics with an actual application to
select CIN and CL.
12
AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR
Rev.1.1_01
S-19251 Series
Explanation of Terms
1. Low dropout voltage regulator
This voltage regulator has the low dropout voltage due to its built-in low on-resistance transistor.
2. Output voltage (VOUT
)
This voltage is output at an accuracy of 2.5% when the input voltage, the output current and the temperature are in a
certain condition*1.
*1. Differs depending on the product.
Caution If the certain condition is not satisfied, the output voltage may exceed the accuracy range of 2.5%.
Refer to " Electrical Characteristics" and " Characteristics (Typical Data)" for details.
ΔVOUT1
3. Line regulation
ΔV • V
OUT
IN
Indicates the dependency of the output voltage on the input voltage. That is, the values show how much the output
voltage changes due to a change in the input voltage with the output current remaining unchanged.
4. Load regulation (ΔVOUT2
)
Indicates the dependency of the output voltage on the output current. That is, the values show how much the output
voltage changes due to a change in the output current with the input voltage remaining unchanged.
5. Dropout voltage (Vdrop
)
Indicates the difference between input voltage (VIN1) and the output voltage when the output voltage becomes 98% of
the output voltage value (VOUT3) at VIN = VOUT(S) + 1.0 V after the input voltage (VIN) is decreased gradually.
Vdrop = VIN1 − (VOUT3 × 0.98)
13
AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR
Rev.1.1_01
S-19251 Series
Operation
1. Basic operation
Figure 14 shows the block diagram of the S-19251 Series to describe the basic operation.
The error amplifier compares the feedback voltage (Vfb) whose output voltage (VOUT) is divided by the feedback
resistors (Rs and Rf) with the reference voltage (Vref). The error amplifier controls the output transistor, consequently,
the regulator starts the operation that keeps VOUT constant without the influence of the input voltage (VIN).
VIN
*1
Current
supply
Error
amplifier
VOUT
−
+
Vref
Rf
Vfb
Reference voltage
circuit
Rs
VSS
*1. Parasitic diode
Figure 14
2. Output transistor
In the S-19251 Series, a low on-resistance P-channel MOS FET is used between the VIN pin and the VOUT pin as the
output transistor. In order to keep VOUT constant, the on-resistance of the output transistor varies appropriately
according to the output current (IOUT).
Caution Since a parasitic diode exists between the VIN pin and the VOUT pin due to the structure of the
transistor, the IC may be damaged by a reverse current if VOUT becomes higher than VIN. Therefore, be
sure that VOUT does not exceed VIN + 0.3 V.
14
AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR
Rev.1.1_01
S-19251 Series
3. ON / OFF pin
The ON / OFF pin controls the internal circuit and the output transistor in order to start and stop the regulator. When
the ON / OFF pin is set to OFF, the internal circuit stops operating and the output transistor between the VIN pin and
the VOUT pin is turned off, reducing current consumption significantly.
Note that the current consumption increases when a voltage of 0.25 V to VIN − 0.3 V is applied to the ON / OFF pin.
The ON / OFF pin is configured as shown in Figure 15 and Figure 16.
3. 1 S-19251 Series A / C type
The ON / OFF pin is internally pulled down to the VSS pin in the floating status, so the VOUT pin is set to the VSS
level.
For the ON / OFF pin current, refer to the A / C type of the ON / OFF pin input current "H" in " Electrical
Characteristics".
3. 2 S-19251 Series B / D type
The ON / OFF pin is internally not pulled up or pulled down, so do not use this pin in the floating status. When not
using the ON / OFF pin, connect the pin to the VIN pin.
Table 13
Product Type
A / B / C / D
A / B / C / D
ON / OFF Pin
"H": ON
"L": OFF
Internal Circuit
Operate
Stop
VOUT Pin Voltage
Constant value*1
Current Consumption
*2
ISS1
ISS2
*3
Pulled down to VSS
*1. The constant value is output due to the regulating based on the set output voltage value.
*2. Note that the IC's current consumption increases as much as current flows into the pull-down resistor when
the ON / OFF pin is connected to the VIN pin and the S-19251 Series A / C type is operating (refer to
Figure 15).
*3. The VOUT pin voltage of the S-19251 Series A / B type is pulled down to VSS due to the discharge shunt
circuit (RLOW = 35 Ω typ.), the feedback resistors (Rs and Rf) and a load.
VIN
VIN
ON / OFF
ON / OFF
VSS
VSS
Figure 15 S-19251 Series A / C Type
Figure 16 S-19251 Series B / D Type
15
AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR
Rev.1.1_01
S-19251 Series
4. Discharge shunt function (S-19251 Series A / B type)
The S-19251 Series A / B type has a built-in discharge shunt circuit to discharge the output capacitance. The output
capacitance is discharged as follows so that the VOUT pin reaches the VSS level.
(1) The ON / OFF pin is set to OFF level.
(2) The output transistor is turned off.
(3) The discharge shunt circuit is turned on.
(4) The output capacitor discharges.
Since the S-19251 Series C / D type does not have a discharge shunt circuit, the VOUT pin is set to the VSS level
through several hundred kΩ internal divided resistors between the VOUT pin and the VSS pin. The S-19251 Series A /
B type allows the VOUT pin to reach the VSS level rapidly due to the discharge shunt circuit.
S-19251 Series
Output transistor : OFF
*1
VOUT
VIN
Discharge shunt circuit
: ON
Output
capacitor
*1
(CL)
ON / OFF
ON / OFF circuit
ON / OFF pin
: OFF
Current flow
GND
VSS
*1. Parasitic diode
Figure 17
5. Pull-down resistor (S-19251 Series A / C type)
The ON / OFF pin is internally pulled down to the VSS pin in the floating status, so the VOUT pin is set to the VSS level.
Note that the IC's current consumption increases as much as current flows into the pull-down resistor of 2.2 MΩ typ.
when the ON / OFF pin is connected to the VIN pin and the S-19251 A / C type is operating.
16
AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR
Rev.1.1_01
S-19251 Series
6. Overcurrent protection circuit
The S-19251 Series has a built-in overcurrent protection circuit to limit the overcurrent of the output transistor. When
the VOUT pin is shorted to the VSS pin, that is, at the time of the output short-circuit, the output current is limited to
50 mA typ. due to the overcurrent protection circuit operation. The S-19251 Series restarts regulating when the output
transistor is released from the overcurrent status.
Caution This overcurrent protection circuit does not work as for thermal protection. For example, when the
output transistor keeps the overcurrent status long at the time of output short-circuit or due to other
reasons, pay attention to the conditions of the input voltage and the load current so as not to exceed
the power dissipation.
7. Thermal shutdown circuit
The S-19251 Series has a built-in thermal shutdown circuit to limit overheating. When the junction temperature
increases to 150°C typ., the thermal shutdown circuit becomes the detection status, and the regulating is stopped.
When the junction temperature decreases to 120°C typ., the thermal shutdown circuit becomes the release status,
and the regulator is restarted.
If the thermal shutdown circuit becomes the detection status due to self-heating, the regulating is stopped and VOUT
decreases. For this reason, the self-heating is limited and the temperature of the IC decreases. The thermal shutdown
circuit becomes release status when the temperature of the IC decreases, and the regulating is restarted, thus the
self-heating is generated again. Repeating this procedure makes the waveform of VOUT into a pulse-like form. This
phenomenon continues unless decreasing either or both of the input voltage and the output current in order to reduce
the internal power consumption, or decreasing the ambient temperature. Note that the product may suffer physical
damage such as deterioration if the above phenomenon occurs continuously.
Caution 1. When the heat radiation of the application is not in a good condition, the self-heating cannot be
limited immediately, and the IC may suffer physical damage. Perform thorough evaluation
including the temperature characteristics with an actual application to confirm no problems
happen.
2. If a large load current flows during the restart process of regulating after the thermal shutdown
circuit changes to the release status from the detection status, the thermal shutdown circuit
becomes the detection status again due to self-heating, and a problem may happen in the restart
of regulating. A large load current, for example, occurs when charging to the CL whose
capacitance is large.
Perform thorough evaluation including the temperature characteristics with an actual application
to select CL.
Table 14
Thermal Shutdown Circuit
Release: 120°C typ.*1
VOUT Pin Voltage
Constant value*2
Pulled down to VSS
*3
Operate: 150°C typ.*1
*1. Junction temperature
*2. The constant value is output due to the regulating based on the set output voltage value.
*3. The VOUT pin voltage is pulled down to VSS due to the feedback resistors (Rs and Rf) and a load.
17
AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR
Rev.1.1_01
S-19251 Series
Precautions
• Generally, when a voltage regulator is used under the condition that the load current value is small (1.0 mA or less),
the output voltage may increase due to the leakage current of an output transistor.
• Generally, when a voltage regulator is used under the condition that the temperature is high, the output voltage may
increase due to the leakage current of an output transistor.
• Generally, when the ON / OFF pin is used under the condition of OFF, the output voltage may increase due to the
leakage current of an output transistor.
• Generally, when a voltage regulator is used under the condition that the impedance of the power supply is high, an
oscillation may occur. Perform thorough evaluation including the temperature characteristics with an actual application
to select CIN.
• Generally, in a voltage regulator, an oscillation may occur depending on the selection of the external parts. The
following use conditions are recommended in the S-19251 Series, however, perform thorough evaluation including the
temperature characteristics with an actual application to select CIN and CL.
Input capacitor (CIN):
A ceramic capacitor with capacitance of 1.0 μF or more is recommended.
Output capacitor (CL): A ceramic capacitor with capacitance of 1.0 μF or more is recommended.
• Generally, in a voltage regulator, the values of an overshoot and an undershoot in the output voltage vary depending
on the variation factors of input voltage start-up, input voltage fluctuation and load fluctuation etc., or the capacitance
of CIN or CL and the value of the equivalent series resistance (ESR), which may cause a problem to the stable
operation. Perform thorough evaluation including the temperature characteristics with an actual application to select
CIN and CL.
• Generally, in a voltage regulator, an overshoot may occur in the output voltage momentarily if the input voltage steeply
changes when the input voltage is started up or the input voltage fluctuates etc. Perform thorough evaluation including
the temperature characteristics with an actual application to confirm no problems happen.
• Generally, in a voltage regulator, if the VOUT pin is steeply shorted with GND, a negative voltage exceeding the
absolute maximum ratings may occur in the VOUT pin due to resonance phenomenon of the inductance and the
capacitance including CL on the application. The resonance phenomenon is expected to be weakened by inserting a
series resistor into the resonance path, and the negative voltage is expected to be limited by inserting a protection
diode between the VOUT pin and the VSS pin.
• If the input voltage is started up steeply under the condition that the capacitance of CL is large, the thermal shutdown
circuit may be in the detection status by self-heating due to the charge current to CL.
• Make sure of the conditions for the input voltage, output voltage and the load current so that the internal loss does not
exceed the power dissipation.
• Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic
protection circuit.
• When considering the output current value that the IC is able to output, make sure of the output current value specified
in Table 12 in " Electrical Characteristics" and footnote *4 of the table.
• Wiring patterns on the application related to the VIN pin, the VOUT pin and the VSS pin should be designed so that the
impedance is low. When mounting CIN between the VIN pin and the VSS pin and CL between the VOUT pin and the
VSS pin, connect the capacitors as close as possible to the respective destination pins of the IC.
• In the package equipped with heat sink of backside, mount the heat sink firmly. Since the heat radiation differs
according to the condition of the application, perform thorough evaluation with an actual application to confirm no
problems happen.
• ABLIC Inc. claims no responsibility for any disputes arising out of or in connection with any infringement by products
including this IC of patents owned by a third party.
18
AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR
Rev.1.1_01
S-19251 Series
Characteristics (Typical Data)
1. Output voltage vs. Output current (When load current increases) (Ta = +25°C)
1. 1 VOUT = 1.0 V
1. 2 VOUT = 2.5 V
1.2
1.0
0.8
0.6
0.4
0.2
0
3.0
2.5
V
V
V
V
V
IN = 2.8 V
IN = 3.0 V
IN = 3.5 V
IN = 4.5 V
IN = 5.5 V
2.0
1.5
1.0
0.5
0
V
IN = 1.5 V
V
IN = 2.0 V
IN = 3.0 V
IN = 5.5 V
V
V
0
100
200
300
400
500
0
100
200
300
400
500
IOUT [mA]
I
OUT [mA]
1. 3 VOUT = 3.5 V
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
Remark In determining the output current, attention should
be paid to the following.
VIN = 3.8 V
VIN = 4.0 V
VIN = 4.5 V
VIN = 5.5 V
1. The minimum output current value and
footnote *4 in Table 12 in " Electrical
Characteristics"
2. Power dissipation
0
100
200
300
400
500
IOUT [mA]
2. Output voltage vs. Input voltage (Ta = +25°C)
2. 1 VOUT = 1.0 V
2. 2 VOUT = 2.5 V
1.2
1.1
1.0
2.7
2.6
2.5
2.4
I
I
I
OUT = 1 mA
OUT = 30 mA
OUT = 50 mA
IOUT = 1 mA
IOUT = 30 mA
IOUT = 50 mA
0.9
0.8
0.7
0.6
2.3
2.2
2.1
2.0
I
OUT = 100 mA
IOUT = 100 mA
0.6
1.0
1.4
1.8
2.2
2.6
2.0
2.5
3.0 3.5
4.0
4.5
VIN [V]
VIN [V]
2. 3 VOUT = 3.5 V
3.7
3.6
3.5
3.4
3.3
3.2
3.1
3.0
I
I
I
OUT = 1 mA
OUT = 30 mA
OUT = 50 mA
I
OUT = 100 mA
3.0
3.5
4.0
4.5
5.0
5.5
VIN [V]
19
AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR
Rev.1.1_01
S-19251 Series
3. Dropout voltage vs. Output current
3. 1 VOUT = 1.0 V
3. 2 VOUT = 2.5 V
0.8
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0
Ta =
25°C
Ta = −40°C
+105°C
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
Ta =
+
Ta = +105°C
Ta = 25°C
Ta = −40°C
+
0
25
50
75
100 125 150
0
25
50
75
100 125 150
IOUT [mA]
IOUT [mA]
3. 3 VOUT = 3.5 V
0.30
0.25
0.20
0.15
Ta = +105°C
+25°C
Ta = −40°C
Ta =
0.10
0.05
0
0
25
50
75
100 125 150
IOUT [mA]
4. Dropout voltage vs. Set output voltage
0.6
I
OUT = 150 mA
0.5
0.4
0.3
0.2
0.1
0
I
OUT = 100 mA
I
OUT
=
I
OUT = 50 mA
OUT = 30 mA
10 mA
I
I
OUT
=
1 mA
1.0
1.5
2.0
2.5
3.0
3.5
VOUT(S) [V]
20
AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR
Rev.1.1_01
S-19251 Series
5. Output voltage vs. Ambient temperature
5. 1 VOUT = 1.0 V
5. 2 VOUT = 2.5 V
1.10
2.7
1.05
1.00
0.95
0.90
2.6
2.5
2.4
2.3
−40
−25
0
25
50
75
105
−
40
−
25
0
25
50
75
105
Ta [°C]
Ta [°C]
5. 3 VOUT = 3.5 V
3.8
3.7
3.6
3.5
3.4
3.3
3.2
−
40
−
25
0
25
Ta [°C]
50
75
105
6. Current consumption vs. Input voltage
6. 1 OUT = 1.0 V
V
6. 2 VOUT = 2.5 V
35
30
25
20
15
10
5
35
30
25
20
15
10
5
Ta =
+
105
°
C
Ta = +105°C
Ta =
+
25°C
Ta =
+
25
°C
Ta =
4
−40°C
Ta =
−
40
°
C
0
0
0
1
2
3
5
6
0
1
2
3
4
5
6
VIN [V]
VIN [V]
6. 3 VOUT = 3.5 V
35
30
25
20
15
10
5
Ta =
+105
°C
Ta =
+
25°C
Ta =
−
40
°C
0
0
1
2
3
4
5
6
VIN [V]
21
AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR
Rev.1.1_01
S-19251 Series
7. Ripple rejection (Ta = +25°C)
7. 1 VOUT = 1.0 V
7. 2 VOUT = 2.5 V
VIN = 2.0 V, CL = 1.0 μF
VIN = 3.5 V, CL = 1.0 μF
100
80
60
40
20
0
100
80
IOUT = 1 mA
I
OUT = 1 mA
60
I
I
I
OUT = 30 mA
OUT = 100 mA
OUT = 150 mA
40
I
I
I
OUT = 30 mA
OUT = 100 mA
OUT = 150 mA
20
0
10
100
1k
10k
100k
1M
10
100
1k
10k
100k
1M
Frequency [Hz]
Frequency [Hz]
7. 3 VOUT = 3.5 V
VIN = 4.5 V, CL = 1.0 μF
100
80
IOUT = 1 mA
60
40
I
I
I
OUT = 30 mA
OUT = 100 mA
OUT = 150 mA
20
0
10
100
1k
10k
100k
1M
Frequency [Hz]
22
AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR
Rev.1.1_01
S-19251 Series
Reference Data
1. Transient response characteristics when input (Ta = +25°C)
1. 1 VOUT = 1.0 V
1. 2 VOUT = 2.5 V
IOUT = 30 mA, CL = 1.0
μ
F, VIN = 3.5 V
↔
4.5 V, tr = tf = 5.0
μ
s
IOUT = 30 mA, CL = 1.0
μ
F, VIN = 2.0 V
↔
3.0 V, tr = tf = 5.0 μs
5.0
2.74
2.70
2.66
2.62
2.58
2.54
2.50
2.46
2.42
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
1.12
1.10
1.08
1.06
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
V
IN
VIN
1.04
1.02
1.00
0.98
0.96
VOUT
V
OUT
−40 −20
0
20 40 60 80 100 120 140
−40 −20
0
20 40 60 80 100 120 140
t [μs]
t [μs]
1. 3 VOUT = 3.5 V
IOUT = 30 mA, CL = 1.0
μ
F, VIN = 4.5 V
↔
5.5 V, tr = tf = 5.0 μs
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
2.0
3.74
3.70
3.66
3.62
3.58
3.54
3.50
3.46
3.42
V
IN
VOUT
−40 −20
0
20 40 60 80 100 120 140
t [μs]
2. Transient response characteristics of load (Ta = +25°C)
2. 1 VOUT = 1.0 V
2. 2 VOUT = 2.5 V
VIN = 2.0 V, CIN = CL = 1.0 μF, IOUT = 50 mA ↔ 100 mA
VIN = 3.5 V, CIN = CL = 1.0 μF, IOUT = 50 mA ↔ 100 mA
150
100
50
150
100
50
1.20
1.15
1.10
1.05
1.00
0.95
0.90
2.70
2.65
2.60
2.55
2.50
2.45
2.40
I
OUT
I
OUT
0
0
−50
−100
−150
−50
−100
−150
V
OUT
V
OUT
−20 −10
0
10 20 30 40 50 60
−20 −10
0
10 20 30 40 50 60
t [μs]
t [μs]
2. 3 VOUT = 3.5 V
VIN = 4.5 V, CIN = CL = 1.0 μF, IOUT = 50 mA ↔ 100 mA
150
100
50
3.70
3.65
3.60
3.55
3.50
3.45
3.40
I
OUT
0
V
OUT
−50
−100
−150
−20 −10
0
10 20 30 40 50 60
t [μs]
23
AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR
Rev.1.1_01
S-19251 Series
3. Transient response characteristics of ON / OFF pin (Ta = +25°C)
3. 1 VOUT = 1.0 V
3. 2 VOUT = 2.5 V
V
IN = 2.0 V, CIN = CL = 1.0 μF, IOUT = 100 mA,
VIN = 3.5 V, CIN = CL = 1.0 μF, IOUT = 100 mA,
VON / OFF = 0 V → 2.0 V, tr = 1.0 μs
VON / OFF = 0 V → 3.5 V, tr = 1.0 μs
2.4
2.0
1.6
1.2
0.8
0.4
0
3
6
5
4
3
2
1
0
6
V
ON / OFF
2
4
V
ON / OFF
OUT
1
2
0
0
V
OUT
−1
−2
−3
V
−2
−4
−6
−50
0
50
100
t [μs]
150
200
−50
0
50
100
t [μs]
150
200
3. 3 VOUT = 3.5 V
VIN = 4.5 V, CIN = CL = 1.0 μF, IOUT = 100 mA,
VON / OFF = 0 V → 4.5 V, tr = 1.0 μs
6
5
4
3
2
1
0
6
4
V
ON / OFF
OUT
2
0
V
−2
−4
−6
−50
0
50
100
t [μs]
150
200
24
AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR
Rev.1.1_01
S-19251 Series
4. Output capacitance vs. Characteristics of discharge time (Ta = +25°C)
1.0 μs
VIN = VOUT + 1.0 V, IOUT = no load,
VON / OFF = VOUT + 1.0 V → VSS, tf = 1.0 μs
VON / OFF
2.5
2.0
1.5
1.0
0.5
0
V
V
V
OUT(S) = 1.0 V
OUT(S) = 2.5 V
OUT(S) = 3.5 V
VSS
tDSC
VOUT
0
2
4
6
8
10
12
VOUT × 10%
CL [μF]
VIN = VOUT + 1.0 V
VON / OFF = VOUT + 1.0 V → VSS
Figure 18 S-19251 Series A / B Type
(with discharge shunt function)
Figure 19 Measurement Condition of Discharge Time
5. Example of equivalent series resistance vs. Output current characteristics (Ta = +25°C)
CIN = CL = 1.0 μF
100
VIN
VOUT
CIN
Stable
S-19251
Series
*1
CL
ON / OFF
VSS
0
RESR
0.1
180
I
OUT [mA]
*1. CL: TDK Corporation CGA5L3X8R1H105K (1.0 μF)
Figure 20
Figure 21
25
AUTOMOTIVE, 105°C OPERATION, 5.5 V INPUT, 150 mA VOLTAGE REGULATOR
Rev.1.1_01
S-19251 Series
Power Dissipation
SOT-23-5
HSNT-4(1010)B
T
j
= +125°C max.
Tj = +125°C max.
1.0
0.8
1.0
0.8
0.6
B
0.6
A
0.4
0.4
0.2
0.0
B
A
0.2
0.0
0
25
50
75
100 125 150 175
0
25
50
75
100 125 150 175
Ambient temperature (Ta) [°C]
Ambient temperature (Ta) [°C]
Board
Power Dissipation (PD)
Board
Power Dissipation (PD)
A
B
C
D
E
0.52 W
A
B
C
D
E
0.26 W
0.63 W
0.32 W
−
−
−
−
−
−
HSNT-4(0808)B
Tj = +125°C max.
1.0
0.8
0.6
0.4
B
A
0.2
0.0
0
25
50
75
100 125 150 175
Ambient temperature (Ta) [°C]
Board
Power Dissipation (PD)
A
B
C
D
E
0.25 W
0.30 W
−
−
−
26
SOT-23-3/3S/5/6 Test Board
No. SOT23x-A-Board-SD-2.0
ABLIC Inc.
HSNT-4(1010)B Test Board
No. HSNT4-D-Board-SD-1.0
ABLIC Inc.
HSNT-4(0808)B Test Board
No. HSNT4-C-Board-SD-1.0
ABLIC Inc.
2.9±0.2
1.9±0.2
4
5
+0.1
-0.06
1
2
3
0.16
0.95±0.1
0.4±0.1
No. MP005-A-P-SD-1.3
TITLE
SOT235-A-PKG Dimensions
MP005-A-P-SD-1.3
No.
ANGLE
UNIT
mm
ABLIC Inc.
4.0±0.1(10 pitches:40.0±0.2)
+0.1
-0
2.0±0.05
0.25±0.1
ø1.5
+0.2
-0
4.0±0.1
ø1.0
1.4±0.2
3.2±0.2
3
4
2 1
5
Feed direction
No. MP005-A-C-SD-2.1
TITLE
SOT235-A-Carrier Tape
MP005-A-C-SD-2.1
No.
ANGLE
UNIT
mm
ABLIC Inc.
12.5max.
9.0±0.3
Enlarged drawing in the central part
ø13±0.2
(60°)
(60°)
No. MP005-A-R-SD-1.1
TITLE
SOT235-A-Reel
MP005-A-R-SD-1.1
No.
ANGLE
UNIT
QTY.
3,000
mm
ABLIC Inc.
0.39±0.02
0.65
3
4
+0.05
-0.02
1
2
0.08
1.00±0.04
he heat sink of back side has different electric
potential depending on the product.
Confirm specifications of each product.
Do not use it as the function of electrode.
0.22±0.05
No. PL004-B-P-SD-1.0
TITLE
HSNT-4-D-PKG Dimensions
PL004-B-P-SD-1.0
No.
ANGLE
UNIT
mm
ABLIC Inc.
4.0±0.05
2.0±0.05
+0.1
-0
ø1.5
0.25±0.05
ø0.5
2.0±0.05
0.5
1.12
2
3
1
4
Feed direction
No. PL004-B-C-SD-1.0
HSNT-4-D-Carrier Tape
PL004-B-C-SD-1.0
TITLE
No.
ANGLE
UNIT
mm
ABLIC Inc.
+1.0
- 0.0
9.0
11.4±1.0
Enlarged drawing in the central part
ø13±0.2
(60°)
(60°)
No. PL004-B-R-SD-1.0
HSNT-4-D-Reel
PL004-B-R-SD-1.0
TITLE
No.
QTY.
ANGLE
UNIT
10,000
mm
ABLIC Inc.
Land Pattern
0.37~0.39
0.52
0.52
0.07
0.65±0.02
(1.02)
Caution It is recommended to solder the heat sink to a board
in order to ensure the heat radiation.
PKG
0.38
Metal Mask Pattern
0.07
Aperture ratio
Aperture ratio
0.22
0.70
0.65
Caution
Mask aperture ratio of the lead mounting part is 100%.
Mask aperture ratio of the heat sink mounting part is approximately 40%.
Mask thickness: t0.12 mm
100%
40%
: t 0.12 mm
HSNT-4-D
TITLE
-Land Recommendation
No.
PL004-B-L-SD-1.0
ANGLE
UNIT
No. PL004-B-L-SD-1.0
mm
ABLIC Inc.
0.39±0.02
0.40
3
4
+0.05
-0.02
1
2
0.08
0.80±0.04
The heat sink of back side has different electric
potential depending on the product.
Confirm specifications of each product.
Do not use it as the function of electrode.
0.22±0.05
No. PK004-B-P-SD-1.0
TITLE
HSNT-4-C-PKG Dimensions
PK004-B-P-SD-1.0
No.
ANGLE
mm
UNIT
ABLIC Inc.
4.0±0.05
2.0±0.05
+0.1
-0
ø1.5
0.25±0.05
2.0±0.05
ø0.5
0.5
0.93
2
3
1
4
Feed direction
No. PK004-B-C-SD-1.0
HSNT-4-C-Carrier Tape
PK004-B-C-SD-1.0
TITLE
No.
ANGLE
mm
UNIT
ABLIC Inc.
+1.0
- 0.0
9.0
11.4±1.0
Enlarged drawing in the central part
ø13±0.2
(60°)
(60°)
No. PK004-B-R-SD-1.0
HSNT-4-C-Reel
TITLE
No.
PK004-B-R-SD-1.0
ANGLE
QTY.
10,000
mm
UNIT
ABLIC Inc.
Land Pattern
0.28~0.30
0.32
0.32
0.05
0.40±0.02
(0.82)
Caution It is recommended to solder the heat sink to a board
in order to ensure the heat radiation.
PKG
Metal Mask Pattern
0.28
0.05
Aperture ratio
Aperture ratio
0.16
0.46
0.40
Caution
Mask aperture ratio of the lead mounting part is 120%.
Mask aperture ratio of the heat sink mounting part is approximately 40%.
Mask thickness: t0.12 mm
120%
40%
: t0.12 mm
HSNT-4-C
TITLE
-Land Recommendation
No.
PK004-B-L-SD-1.1
ANGLE
No. PK004-B-L-SD-1.1
mm
UNIT
ABLIC Inc.
Disclaimers (Handling Precautions)
1. All the information described herein (product data, specifications, figures, tables, programs, algorithms and
application circuit examples, etc.) is current as of publishing date of this document and is subject to change without
notice.
2. The circuit examples and the usages described herein are for reference only, and do not guarantee the success of
any specific mass-production design.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by the reasons other than the products
described herein (hereinafter "the products") or infringement of third-party intellectual property right and any other
right due to the use of the information described herein.
3. ABLIC Inc. is not liable for any losses, damages, claims or demands caused by the incorrect information described
herein.
4. Be careful to use the products within their ranges described herein. Pay special attention for use to the absolute
maximum ratings, operation voltage range and electrical characteristics, etc.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by failures and / or accidents, etc. due to
the use of the products outside their specified ranges.
5. Before using the products, confirm their applications, and the laws and regulations of the region or country where they
are used and verify suitability, safety and other factors for the intended use.
6. When exporting the products, comply with the Foreign Exchange and Foreign Trade Act and all other export-related
laws, and follow the required procedures.
7. The products are strictly prohibited from using, providing or exporting for the purposes of the development of
weapons of mass destruction or military use. ABLIC Inc. is not liable for any losses, damages, claims or demands
caused by any provision or export to the person or entity who intends to develop, manufacture, use or store nuclear,
biological or chemical weapons or missiles, or use any other military purposes.
8. The products are not designed to be used as part of any device or equipment that may affect the human body, human
life, or assets (such as medical equipment, disaster prevention systems, security systems, combustion control
systems, infrastructure control systems, vehicle equipment, traffic systems, in-vehicle equipment, aviation equipment,
aerospace equipment, and nuclear-related equipment), excluding when specified for in-vehicle use or other uses by
ABLIC, Inc. Do not apply the products to the above listed devices and equipments.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by unauthorized or unspecified use of
the products.
9. In general, semiconductor products may fail or malfunction with some probability. The user of the products should
therefore take responsibility to give thorough consideration to safety design including redundancy, fire spread
prevention measures, and malfunction prevention to prevent accidents causing injury or death, fires and social
damage, etc. that may ensue from the products' failure or malfunction.
The entire system in which the products are used must be sufficiently evaluated and judged whether the products are
allowed to apply for the system on customer's own responsibility.
10. The products are not designed to be radiation-proof. The necessary radiation measures should be taken in the
product design by the customer depending on the intended use.
11. The products do not affect human health under normal use. However, they contain chemical substances and heavy
metals and should therefore not be put in the mouth. The fracture surfaces of wafers and chips may be sharp. Be
careful when handling these with the bare hands to prevent injuries, etc.
12. When disposing of the products, comply with the laws and ordinances of the country or region where they are used.
13. The information described herein contains copyright information and know-how of ABLIC Inc. The information
described herein does not convey any license under any intellectual property rights or any other rights belonging to
ABLIC Inc. or a third party. Reproduction or copying of the information from this document or any part of this
document described herein for the purpose of disclosing it to a third-party is strictly prohibited without the express
permission of ABLIC Inc.
14. For more details on the information described herein or any other questions, please contact ABLIC Inc.'s sales
representative.
15. This Disclaimers have been delivered in a text using the Japanese language, which text, despite any translations into
the English language and the Chinese language, shall be controlling.
2.4-2019.07
www.ablic.com
相关型号:
©2020 ICPDF网 联系我们和版权申明