AK7DBQ1-200.0000 [ABRACON]
CRYSTAL OSCILLATOR, CLOCK, LVDS OUTPUT,;型号: | AK7DBQ1-200.0000 |
厂家: | ABRACON |
描述: | CRYSTAL OSCILLATOR, CLOCK, LVDS OUTPUT, 输出元件 |
文件: | 总12页 (文件大小:2034K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ClearClock™ | Ultra-Low Jitter 7.0 x 5.0mm XO
7.0 x 5.0 x 1.8 mm
RoHS/RoHS II Compliant
MSL = 1
AK7
ESD Sensitive
Pb
Features
Applications
• 3rd overtone solution
• Ultra-Low jitter: 75 fs typ RMS
• Networking & communications
• Gigabit Ethernet
(100fs MAX, F= 156.25MHz LVPECL); spurs included
• Frequency range: 100MHz to 220MHz
• Lowest in-class power consumption (16mA Typ LVDS)
• ± 20ppm & ± 25ppm stability (-40 to +85ºC) options
available (dependent on frequency)
• Fibre Channel
• SONET/SDH
• RF systems, base stations (BTS)
• Datacenter
• PCI Express
• 3.3V, 2.5V, 1.8V Vdd supply
• Test & measurement
• LVPECL, LVDS, & HCSL differential output options
• Output enable standard
[Note 1]
Options and Part Identification
AK7
(6): Packaging
(1): Output
Blank: Bulk (***)
T2: Tape & Reel 250 units
T: Tape & Reel 1,000 units
(***) MOQ: 50 units
(3): Stability over OTR
D: ±15ppm over -20°C to +70°C
Q: ±20ppm over -40°C to +85°C (**)
F: ±25 ppm over -40°C to +85°C
(**) Contact Abracon for availability
P: LVPECL
D: LVDS
H: HCSL
(2): Vdd
A: 3.3V
(5): Output Frequency
in MHz
B: 2.5V
(4): OE Function
1: OE Pin 1; Active High
3: OE Pin 2; Active High
C: 1.8V (*)
Please specify the frequency in
units of MHz out to
4 digit accuracy after the decimal.
Example: “156.2500”=156.25MHz
(*) Excluding
LVPECL
Part Number Example:
AK7PAF1-156.2500
AK7PAF1-156.2500T2
AK7PAF1-156.2500T
Note 1: Contact Abracon for non-standard part number configurations and/or requests with carrier frequency callouts up to 5 & 6 digit accuracy after the decimal.
5101 Hidden Creek Ln Spicewood TX 78669
ABRACON IS
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ISO9001-2015
CERTIFIED
REVISED: 04.15.2019
LLC
ClearClock™ | Ultra-Low Jitter 7.0 x 5.0mm XO
7.0 x 5.0 x 1.8 mm
RoHS/RoHS II Compliant
MSL = 1
AK7
ESD Sensitive
Pb
Electrical Characteristics
Parameters
Min.
Typ.
Max.
Unit
Notes
Frequency Range
100
220
MHz
100, 122.88, 125, 148.5
156.25, 200, 212.5
Contact Abracon for availability
of frequenices not listed
Standard Available Frequencies
MHz
2.97
2.37
1.71
3.3
2.5
1.8
30
3.63
Option “A”
Option “B”
Option “C”
@ 220MHz; @ Vdd = 3.3V
Supply Voltage (Vdd) [Note 2]
2.62
1.89
50
V
LVPECL
LVDS
Supply Current (Idd)
16
27
mA @ 220MHz; @ Vdd = 3.3V
HCSL
17
30
@ 220MHz; @ Vdd = 3.3V
-20
-40
-55
+70
+85
+150
Option “D”
°C
Operating Temperature Range
Storage Temperature
Frequency Accuracy (Initial Set-Tolerance) [Note 3]
Option “F” or “Q”
°C
-10
< ±5
+10
ppm Relative to carrier frequency
at time of shipment (Pre-Reflow) @ +25°C
-15
-20
-25
-15
-40
-45
-50
+15
+20
+25
+15
+40
+45
+50
Option “D” (-20°C to +70°C)
ppm Option “Q” (-40°C to +85°C)
Option “F” (-40°C to +85°C)
ppm
Option “D” (-20°C to +70°C)
ppm Option “Q” (-40°C to +85°C)
Option “F” (-40°C to +85°C)
Frequency Stability over [Note 4]
Operating Temperature Range
Aging over 20 Year Product Life [Note 5]
All-Inclusive Frequency Accuracy (Total Stability)
over 20 Year Product Life [Note 5, 6]
0.2
0.3
0.4
0.6
0.4
0.4
0.5
0.5
0.5
0.6
@ Vdd=3.3V, RL=50Ω
@ Vdd=2.5V, RL=50Ω
@ Vdd=3.3V, RL=100Ω
LVPECL
0.15
0.15
0.3
LVDS
HCSL
@ Vdd=2.5V, RL=100Ω
ns
Rise (Tr) / Fall (Tf) Time
20% to 80% Vpeak to peak
@ Vdd=1.8V, RL=100Ω
0.3
@ Vdd=3.3V, RL=50Ω to GND
@ Vdd=2.5V, RL=50Ω to GND
@ Vdd=1.8V, RL=50Ω to GND
0.3
0.3
Duty Cycle
45
55
%
Start-up Time [Note 3]
< 2
5.0
ms
Note 2:
Note 3:
Note 4:
Note 5:
Note 6:
Supply Voltage (Vdd) = 1.8V option not available with LVPECL output
Relative to initial measured frequency @ +25°C
Option Q only available in select frequencies. Please contact Abracon for availability
Relative to post-reflow frequency
Includes temperature stability, initial frequency accuracy, load pulling, power supply variation, and 20-year aging
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
ISO9001-2015
CERTIFIED
REVISED: 04.15.2019
LLC
ClearClock™ | Ultra-Low Jitter 7.0 x 5.0mm XO
7.0 x 5.0 x 1.8 mm
RoHS/RoHS II Compliant
MSL = 1
AK7
ESD Sensitive
Pb
Electrical Characteristics Cont.
Parameters
Min.
Vdd-1.03
Typ.
Max.
Vdd-0.88
Vdd-1.60
1.60
Unit
Notes
VOH
VOL
VOH
VOL
VOH
VOL
LVPECL
RL=50Ω to Vdd–2.0V
Vdd-1.85
Differential
1.40
1.10
0.74
0.00
0.75
0.35
0.70
Output High Voltage (VOH
Output Low Voltage (VOL)
)
LVDS
HCSL
V
RL=100Ω between both outputs
0.90
0.40
0.85
0.15
0.93
0.45
0.78
RL=50Ω to ground on each
output
-0.15
0.595
0.25
LVPECL
Output Voltage Swing
V
V
LVDS
0.620
0.7*(Vdd)
HCSL
Output Enable; or No Connect
Output Disable; High Impedance
Output Enable & Disable Control
0.3*(Vdd)
5.0
Output Enable Time
Output Disable Time
< 1
ms
0.2
μs
Output Disable Current Consumption
< 10
95
μA OE ≤ 0.3V
@ Vdd=3.3V
70
80
LVPECL
LVDS
105
150
175
145
160
100
105
115
105
135
140
@ Vdd=2.5V
125
150
120
135
75
@ Vdd=3.3V
fsec
@ 200 MHz
@ Vdd=2.5V
@ Vdd=3.3V
@ Vdd=2.5V
@ Vdd=3.3V
@ Vdd=2.5V
RMS Phase Jitter [Note 7, 8, 9]
@ +25°C
HCSL
LVPECL
LVDS
(12kHz-20MHz BW)
80
90
@ Vdd=3.3V
fsec
@ 156.25 MHz
80
@ Vdd=2.5V
110
115
@ Vdd=3.3V
@ Vdd=2.5V
HCSL
Note 7:
Note 8:
Note 9:
Guaranteed by characterization; RMS Phase Jitter specifications are inclusive of any spurs
Phase jitter measured with Keysight E5052B Signal Source Analyzer
Refer to the next section for phase noise test setup and representative phase noise plots
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
ISO9001-2015
CERTIFIED
REVISED: 04.15.2019
LLC
ClearClock™ | Ultra-Low Jitter 7.0 x 5.0mm XO
7.0 x 5.0 x 1.8 mm
RoHS/RoHS II Compliant
MSL = 1
AK7
ESD Sensitive
Pb
Electrical Characteristics Cont.
Parameters
Min.
Typ.
115
95
Max.
140
120
150
145
155
160
140
125
125
175
135
165
160
165
160
175
180
155
140
190
160
165
150
180
170
145
180
Unit
Notes
@ Vdd=3.3V
@ Vdd=2.5V
@ Vdd=3.3V
LVPECL
LVDS
125
120
130
135
115
100
100
150
110
140
135
140
135
150
155
130
115
165
135
140
125
155
145
120
155
@ 148.5 MHz
fsec @ Vdd=2.5V
@ Vdd=3.3V
@ Vdd=2.5V
@ Vdd=1.8V
@ Vdd=3.3V
@ Vdd=2.5V
@ Vdd=3.3V
HCSL
LVPECL
LVDS
@ Vdd=2.5V
fsec
@ 125 MHz
@ Vdd=1.8V
RMS Phase Jitter [Note 7, 8, 9]
@ +25°C
@ Vdd=3.3V
@ Vdd=2.5V
@ Vdd=1.8V
@ Vdd=3.3V
@ Vdd=2.5V
@ Vdd=3.3V
HCSL
LVPECL
LVDS
(12kHz-20MHz BW)
@ Vdd=2.5V
fsec
@ 122.88 MHz
@ Vdd=1.8V
@ Vdd=3.3V
@ Vdd=2.5V
@ Vdd=1.8V
@ Vdd=2.5V
HCSL
LVDS
HCSL
@ Vdd=3.3V
fsec
@ 100 MHz
@ Vdd=2.5V
@ Vdd=1.8V
Note 7:
Note 8:
Note 9:
Guaranteed by characterization; RMS Phase Jitter specifications are inclusive of any spurs
Phase jitter measured with Keysight E5052B Signal Source Analyzer
Refer to the next section for phase noise test setup and representative phase noise plots
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
ISO9001-2015
CERTIFIED
REVISED: 04.15.2019
LLC
ClearClock™ | Ultra-Low Jitter 7.0 x 5.0mm XO
7.0 x 5.0 x 1.8 mm
RoHS/RoHS II Compliant
MSL = 1
AK7
ESD Sensitive
Pb
[Note 10]
Phase Noise Test Setup
•
•
•
•
•
•
•
Keysight E5052B Signal Source Analyzer
Integration Bandwidth = 12kHz to 20MHz
Spurious Activity (entire plot trace) = NOT Omitted (Normalized in dBc/Hz)
Specifed Spur Omission Function = NOT Enabled
IF Gain = 20dB
Correlation = 5
Average = 3
F=156.2500MHz | Vdd=3.3V | LVPECL
RMS Phase Jitter = 69 fsec
F=156.2500MHz | Vdd=2.5V | LVPECL
RMS Phase Jitter = 77 fsec
F=156.2500MHz | Vdd=3.3V | LVDS
RMS Phase Jitter = 88 fsec
F=156.2500MHz | Vdd=2.5V | LVDS
RMS Phase Jitter = 79 fsec
Note 10: Contact Abracon for phase noise plots at alternative supply voltage (Vdd) & differential output formats.
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
ABRACON IS
ISO9001-2015
CERTIFIED
REVISED: 04.15.2019
LLC
www.abracon.com
ClearClock™ | Ultra-Low Jitter 7.0 x 5.0mm XO
7.0 x 5.0 x 1.8 mm
RoHS/RoHS II Compliant
MSL = 1
AK7
ESD Sensitive
Pb
[Note 10]
Representative Phase Noise Plots @ +25°C
F= 156.2500MHz | Vdd=3.3V | HCSL
RMS Phase Jitter = 103 fsec
F=156.2500MHz | Vdd=2.5V | HCSL
RMS Phase Jitter = 109 fsec
F=125.0000MHz | Vdd=3.3V | LVPECL
RMS Phase Jitter = 88 fsec
F= 125.0000MHz | Vdd=1.8V | LVDS
RMS Phase Jitter = 136 fsec
Note 10: Contact Abracon for phase noise plots at alternative supply voltage (Vdd) & differential output formats.
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
ABRACON IS
ISO9001-2015
CERTIFIED
REVISED: 04.15.2019
LLC
www.abracon.com
ClearClock™ | Ultra-Low Jitter 7.0 x 5.0mm XO
7.0 x 5.0 x 1.8 mm
RoHS/RoHS II Compliant
MSL = 1
AK7
ESD Sensitive
Pb
[Note 10]
Representative Phase Noise Plots @ +25°C Cont.
F= 100.0000MHz | Vdd=3.3V | HCSL
RMS Phase Jitter = 131 fsec
F=100.0000MHz | Vdd=2.5V | HCSL
RMS Phase Jitter = 114 fsec
F=148.5000MHz | Vdd=3.3V | LVPECL
RMS Phase Jitter = 114 fsec
Note 10: Contact Abracon for phase noise plots at alternative supply voltage (Vdd) & differential output formats.
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
ABRACON IS
ISO9001-2015
CERTIFIED
REVISED: 04.15.2019
LLC
www.abracon.com
ClearClock™ | Ultra-Low Jitter 7.0 x 5.0mm XO
7.0 x 5.0 x 1.8 mm
RoHS/RoHS II Compliant
MSL = 1
AK7
ESD Sensitive
Pb
Typical Frequency vs. Temperature Characteristics
Differential Output Waveform
5101 Hidden Creek Ln Spicewood TX 78669
ABRACON IS
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ISO9001-2015
CERTIFIED
REVISED: 04.15.2019
LLC
ClearClock™ | Ultra-Low Jitter 7.0 x 5.0mm XO
7.0 x 5.0 x 1.8 mm
RoHS/RoHS II Compliant
MSL = 1
AK7
ESD Sensitive
Pb
Recommended Test Circuit [Note 11]
LVPECL
LVDS
vdd
vdd
Vdd=3.3V: R1=R3=127Ω; R2=R4=82.5 Ω
Vdd=2.5V: R1=R3=250Ω; R2=R4=62.5 Ω
HCSL
Note 11: Recommended test circuit images are representative of when the OE Function is located on Pin 1;
when the OE Function is located on Pin 2, then Pin 1=No Connect & Pin 2=OE or No Connect.
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
ABRACON IS
ISO9001-2015
CERTIFIED
REVISED: 04.15.2019
LLC
www.abracon.com
ClearClock™ | Ultra-Low Jitter 7.0 x 5.0mm XO
7.0 x 5.0 x 1.8 mm
RoHS/RoHS II Compliant
MSL = 1
AK7
ESD Sensitive
Pb
Mechanical Dimensions
Case 1
Case 2
Pin #1=Output
Pin #2=Output
Enable/Disable Function
where OE is Active HIGH
Enable/Disable Function
where OE is Active HIGH
Pin
Description
Pin
Description
Output Enable =
Logic High, “1”, Vdd
# 1
No Connect
# 1
Output Disable =
Output Enable =
Logic Low, “0”, GND
Logic High, “1”, Vdd
# 2
Output Enable =
Logic Low, “0”, GND
# 2
No Connect
# 3
# 4
# 5
# 6
GND
# 3
# 4
# 5
# 6
GND
Output
Output
Complementary output
Supply Voltage (Vdd)
Complementary output
Supply Voltage (Vdd)
Dimensions: inches [mm]
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
ISO9001-2015
CERTIFIED
REVISED: 04.15.2019
LLC
ClearClock™ | Ultra-Low Jitter 7.0 x 5.0mm XO
7.0 x 5.0 x 1.8 mm
RoHS/RoHS II Compliant
MSL = 1
AK7
ESD Sensitive
Pb
Recommended Reflow Profile [Note 12]
3
Tp
Critical Zone
Tp
TL to Tp
[Note 14]
Ramp Up
[Note 13]
TL
TSMAX
TL
TSMIN
Ramp Down
Preheat
1
2
25
t 25˚C to Peak
[Note 15]
Time
Zone
1
Description
Temperature
Time
TSMIN ~ TSMAX
150°C ~ 200°C
Preheat / Soak
60 ~ 180 sec.
TL
217°C
Reflow
60 ~ 150 sec.
20 ~ 40 sec.
2
3
TP
Peak heat
260°C±5°C
Note 12: Can withstand: 2 reflows
Note 13: Ramp Up Rate (TL → TP) = 3°C / sec. MAX
Note 14: Ramp Down Rate (TP → TL) = 6°C / sec. MAX
Note 15: Time 25°C to Peak Temperature (25°C → TP) = 8 minutes MAX
All temperatures refer to topside of the package, measured on the package body surface.
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
ISO9001-2015
CERTIFIED
REVISED: 04.15.2019
LLC
ClearClock™ | Ultra-Low Jitter 7.0 x 5.0mm XO
7.0 x 5.0 x 1.8 mm
RoHS/RoHS II Compliant
MSL = 1
AK7
ESD Sensitive
Pb
Packaging
Bulk (MOQ = 50 units)
T2 = Tape & Reel 250 units/reel
T= Tape & Reel 1,000 units/reel
Feeding (PULL) Direction →
Tape Dimensions
A
B
C
D
E
16.0
7.2
5.4
8.0
1.8
Reel Dimensions
F
G
H
180.0
16.5
19.6
Dimensions: mm
ATTENTION: Abracon LLC’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability
where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment,
written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information.
5101 Hidden Creek Ln Spicewood TX 78669
ABRACON IS
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ISO9001-2015
CERTIFIED
REVISED: 04.15.2019
LLC
相关型号:
©2020 ICPDF网 联系我们和版权申明