101830-HMC214MS8 [ADI]
BOARD EVAL HMC214MS8E;
| 型号： | 101830-HMC214MS8 |
| 厂家： | 
ADI |
| 描述： | BOARD EVAL HMC214MS8E |
| 文件： | 总6页 (文件大小：873K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HMC214MS8 / 214MS8E
v01.1109
HIGH IP3 GaAs MMIC
MIXER, 2.4 - 4.0 GHz
Typical Applications
Features
The HMC214MS8 / HMC214MS8E is ideal for:
• WiMAX, 802.16
Input IP3: +34 dBm
LO to RF Isolation: 28 dB
• Fixed Wireless Access
+22 dBm Input P1dB
• Wireless Local Loop
No External Components
Ultra Small MSOP Packag14.8m
Included in the HMC-DK003 gner’s K
9
Functional Diagram
General Decriion
The HM14MS8(E) is general purpose high
dynamrange assive MMIC mixer in plastic sur-
face unt 8 lead Mini Small Outline Package
(MSOP) ering 4 to 4 GHz. Excellent input
IP3 performof +34 dBm for downcon-ver-
sion and +31 dBm for upconversion is provided
WiMaand other 3.5 GHz applications at an
LO rof +17 dBm. With a 1dB compression of
+22 dBm, the RF port will accept a wide range of
nput signal levels. Conversion loss is 10 dB typical
and LO isolations are maintained at 25 to 30 dB.
This miniature single-ended monolithic GaAs FET
mixer does not require any external components or
bias. The DC to 1 GHz IF frequency response will
satisfy many transmit and receive frequency plans
configured for low side LO. The HMC214MS8 &
HMC214MS8E input IP3 performance coupled with
its high P1dB rivals traditional active FET mixers
while offering a much smaller 14.8mm2 standard IC
footprint and no DC bias.
Electrical tions, TA = +25°C, LO = +17dBm, IF = 200 MHz*
Parameter
Min.
Typ.
2.4 - 4.0
2.4 - 4.0
DC - 1
10
Max.
Min.
Typ.
3.4 - 3.8
3.4 - 3.8
DC - 1
10
Max.
Units
GHz
GHz
GHz
dB
Frequency Range, RF
Frequency Range, LO
Frequency Range, IF
Conversion Loss
Noise Figure (SSB)
LO to RF Isolation
LO to IF Isolation
IP3 (Input)
12
12
11.5
11.5
10
10
dB
18
12
26
18
30
20
22
31
20
28
dB
25
30
dB
30
34
dBm
dBm
dBm
1 dB Gain Compression (Input)
LO Input Drive Level (Typical)
21
22
+15 to +19
+15 to +19
*Unless otherwise noted, all measurements performed as a downconverter, with low side LO & IF = 200 MHz.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
9 - 78
HMC214MS8 / 214MS8E
v01.1109
HIGH IP3 GaAs MMIC
MIXER, 2.4 - 4.0 GHz
Conversion Gain vs.
Temperature @ LO = +17 dBm
Isolation @ LO = +17 dBm
0
0
RF to IF
LO to RF
LO to IF
-5
-10
-20
-30
-40
-10
+25 C
+85 C
-40 C
9
-15
-20
2.2
2.6
3
3.4
3.8
4.2
4.2
4.2
2.2
2.6
3
3.4
3.8
3.8
0.8
4.2
4.2
1
RF FREQUENCY (GHz)
FREQU(GHz)
Return Ls @ LO = +17 dBm
Conversion Gain vs. LO Drive
0
0
RF
LO
5
-10
-15
-20
-25
-5
-10
LO = +15 dBm
LO = +16 dB
-15
LO = +17 dB
LO = +19 dB
-20
2.2
2.6
3
3.8
2.2
2.6
3
3.4
RF F
FREQUENCY (GHz)
Upconverteman
ConversioO = +17 dBm
IF Bandwidth @ LO = +17 dBm
0
0
-4
-8
Conver. Gain
Return Loss
-5
-10
-12
-16
-20
-15
-20
2.2
2.6
3
3.4
3.8
0
0.2
0.4
0.6
RF FREQUENCY (GHz)
IF FREQUENCY (GHz)
Unless otherwise noted, all measurements performed as a downconverter, with low side LO & IF = 200 MHz.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
9 - 79
HMC214MS8 / 214MS8E
v01.1109
HIGH IP3 GaAs MMIC
MIXER, 2.4 - 4.0 GHz
Input IP3 vs.
Temperature, LO = +17 dBm
Input IP3 vs. LO Drive
45
45
LO = +15 dBm
LO = +16 dBm
40
40
35
LO = +17 dBm
LO = +19 dBm
35
30
25
20
30
9
+25 C
+85 C
-40 C
25
20
2.2
2.6
3
3.4
3.8
4.2
2.2
2.6
3
3.4
3.8
4.2
RF FREQUENCY (GHz)
RF FREQCY (GHz)
Upconverter IP3 vs.
LO Drive, IF = 200 MHz
40
Input B vs.
Temperare LO = +17 dBm
25
36
32
28
3
21
+25 C
+85 C
-40 C
19
17
15
LO = +15 dB
LO = +16 dB
LO = +17 dB
LO = +19 dBm
24
20
2.2
2.6
3
3.8
4.2
2.2
2.6
3
3.4
3.8
4.2
RF F
RF FREQUENCY (GHz)
Harmoni
MxN Spurious Outputs
nLO Spur @ RF Port
nLO
LO Freq (GHz)
2
3
4
mRF
0
1
-4
2
-2
3
9
4
xx
2.6
35
30
29
28
25
24
26
26
26
29
28
31
42
47
46
42
40
39
39
40
42
xx
xx
xx
0
1
2
3
4
xx
9
2.8
0
37
49
104
99
39
65
85
104
35
77
91
106
3.0
73
97
xx
66
98
100
3.2
3.4
3.6
RF Freq = 3.5 GHz @ -10 dBm
LO Freq = 3.3 GHz @ +17 dBm
All values in dBc relative to the IF output power.
LO = +17 dBm
All values are in dBc below input LO level @ RF port.
Unless otherwise noted, all measurements performed as a downconverter, with low side LO & IF = 200 MHz.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
9 - 80
HMC214MS8 / 214MS8E
v01.1109
HIGH IP3 GaAs MMIC
MIXER, 2.4 - 4.0 GHz
Absolute Maximum Ratings
RF/IF Input
+27 dBm
+27 dBm
40 mA
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
LO Drive
IF DC Current
Channel Temperature
150 °C
Continuous Pdiss (T=85 °C)
(derate 3.69 mW/°C above 85 °C)
240 mW
Thermal Resistance (RTH
(junction to lead)
)
270 °C/W
9
Storage Temperature
Operating Temperature
ESD Sensitivity (HBM)
-65 to +150 °C
-40 to +85 °C
Class 1A
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking [3]
H214
XXXX
HMC214MS8
Low Stress Injection Molded Plastic
Sn/Pb Solder
H214
XXXX
MSL1 [2]
HMC214MS8E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
Unless otherwise noted, all measurements performed as a downconverter, with low side LO & IF = 200 MHz.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
9 - 81
HMC214MS8 / 214MS8E
v01.1109
HIGH IP3 GaAs MMIC
MIXER, 2.4 - 4.0 GHz
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
This pin is DC coupled & matched to 50 Ohms. Blocking
capacitors are required if line potential is not equal to 0V.
1
LO
The pins are not connected internally; however, all data shown
herein was measured with these pins connected to RF/DC
ground externally.
2, 4
N/C
9
3, 6, 7
GND
This pin must be connected to RF ground.
This pin is DC coupled. For applications not requiroperation
to DC this port should be DC blocked externalling a series
capacitor. Choose value of capacitor to paIF frequy
desired. For operation to DC, this pin must sinkurce
more than 40 mA of current or failure malt.
5
8
IF
This pin is Dupled
and matched to 5hms.
RF
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
9 - 82
HMC214MS8 / 214MS8E
v01.1109
HIGH IP3 GaAs MMIC
MIXER, 2.4 - 4.0 GHz
Evaluation PCB
9
List of MEvaluation PCB 101830 [1]
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 ohm impedance while the
package ground leads and exposed paddle should
be connected directly to the ground plane similar
to that shown. A sufficient number of via holes
should be used to connect the top and bottom
ground planes. The evaluation circuit board shown
is available from Hittite upon request.
Item
J1 - J3
U1
ption
Mount SMA RF Connector
HMC214MS8 / HMC214MS8E Mixer
101828 Eval Board
[2]
PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
9 - 83
相关型号：
101833U010BB2B
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 10V, 83000uF, CHASSIS MOUNT
CDE
101853U030CC2B
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 30V, 85000uF, CHASSIS MOUNT
CDE
101872U030AA2B
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 30V, 75% +Tol, 10% -Tol, 8700uF, Chassis Mount
CDE
101873U016BC2B
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 16V, 87000uF, CHASSIS MOUNT
CDE
©2020 ICPDF网 联系我们和版权申明