24LC64-I [ADI]
Evaluation Board for 16-Bit, Serial Input, Loop-Powered 4 mA to 20 mA DAC; 评估板用于16位，串行输入，环路供电4毫安至20 mA DAC
| 型号： | 24LC64-I |
| 厂家： | 
ADI |
| 描述： | Evaluation Board for 16-Bit, Serial Input, Loop-Powered 4 mA to 20 mA DAC |
| 文件： | 总12页 (文件大小：562K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Evaluation Board User Guide
UG-250
One Technology Way • P. O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
Evaluation Board for 16-Bit, Serial Input, Loop-Powered 4 mA to 20 mA DAC
FEATURES
EVALUATION BOARD DESCRIPTION
Full-featured evaluation board for the AD5421
Link options
PC control in conjunction with Analog Devices, Inc.,
system demonstration platform (SDP)
PC software for control
The EVAL-AD5421 is a full-featured evaluation board, designed
to allow the user to easily evaluate all features of the AD5421
loop-powered 4 mA to 20 mA DAC. The AD5421 pins are
accessible at on-board connectors for external connection. The
AD5421 evaluation board is controlled via the PC’s USB port in
conjunction with Analog Device’s system demonstration
platform board. The SDP board allows the evaluation board to
be controlled through the USB port of a Windows® XP (SP2 or
later) or Vista-based (32-bit) PC using the AD5421 evaluation
software. The AD5421 serial interface is also accessible at the
testpoint connections on the board.
EQUIPMENT NEEDED
DC power supply unit
SDP for PC control (EVAL-SDP-CB1Z)
Voltmeter or ammeter
DOCUMENTS NEEDED
DEVICE DESCRIPTION
AD5421 data sheet
The AD5421 is an integrated device designed for use in loop-
powered 4 mA to 20 mA smart transmitter applications. The
AD5421, in a single chip, provides a 16-bit DAC and current
amplifier for digital control of the loop current, a voltage
regulator to power the entire transmitter, a voltage reference,
fault alert functions, flexible SPI-compatible serial interface,
gain and offset adjust registers as well as other features and
functions.
SOFTWARE NEEDED
AD5421 evaluation software
Complete specifications for the AD5421 are available in the
AD5421 data sheet available from Analog Devices and should
be consulted in conjunction with this document when using the
evaluation board.
FUNCTIONAL BLOCK DIAGRAM
PC
USB
PORT
EVAL-AD5421SDZ
DIGITAL
ISOLATION
LOOP+
LOOP–
SYSTEM DEMONSTRATION
PLATFORM BOARD
AD5421
Figure 1.
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. A | Page 1 of 12
UG-250
Evaluation Board User Guide
TABLE OF CONTENTS
Features .............................................................................................. 1
Power Supplies...............................................................................3
Link Options..................................................................................3
Evaluation Board Software Quick Start Procedures.....................5
Software Installation .....................................................................5
Software Operation.......................................................................5
Main Window................................................................................6
Evaluation Board Schematics and Artwork...................................7
Ordering Information.................................................................... 11
Bill of Materials........................................................................... 11
Equipment Needed........................................................................... 1
Documents Needed.......................................................................... 1
Software Needed............................................................................... 1
Evaluation Board Description......................................................... 1
Device Description........................................................................... 1
Functional Block Diagram .............................................................. 1
Revision History ............................................................................... 2
Evaluation Board Hardware............................................................ 3
REVISION HISTORY
10/11—Rev. 0 to Rev. A
Change to Figure 4 ........................................................................... 7
3/11—Revision 0: Initial Version
Rev. A | Page 2 of 12
Evaluation Board User Guide
UG-250
EVALUATION BOARD HARDWARE
Default Link Option Setup
POWER SUPPLIES
The default link options are listed in Table 1.
The AD5421 evaluation board requires one power supply
connection from LOOP− to LOOP+ (J7), a voltage in the
range from 5.5 V to 52 V can be applied if the on-board
MOSFET device (U2) is not enabled. With U2 enabled, the
voltage limit is the breakdown voltage of U2, which in this
case is 240 V. A load resistor can also be connected at J7.
Table 1. Link Options
Link No.
Option
LK1
Inserted
LK2
B
LK4
Inserted
LINK OPTIONS
LK6
LK7
Inserted
Inserted
Set the link options on the evaluation board for the required
operating setup before powering on the board. The functions
of the link options are described in Table 2.
Alarm_Dir
Rint_Rext
Range0
Range1
Reg_Sel0
Reg_Sel1
Reg_Sel2
B
B
B
B
A
B
A
Rev. A | Page 3 of 12
UG-250
Evaluation Board User Guide
Table 2. Link Options
Link No.
Description
LK1
This link connects the VLOOP input pin to the LOOP+ voltage via a 20:1 resistor divider.
When this link is inserted, the VLOOP pin is connected to the resistor divider.
When this link is removed, the VLOOP pin is unconnected and can be connected to another voltage (maximum 2.5 V) via TP26.
LK2
LK4
This link enables/disables the MOSFET device.
Position A disables the MOSFET device.
Position B enables the MOSFET device and the loop supply is connected directly to the REGIN pin.
This link enables/disables the iCoupler® digital isolators.
When this link is inserted, the isolators are enabled.
When this link is removed, the isolators are disabled.
LK6
LK7
This link should be inserted when the MOSFET device is enabled (LK2 in Position B).
This link should be removed when the MOSFET device is disabled (LK2 in Position A).
This link completes the loop connection if a load resistor is not connected at Connector J7.
This link should be inserted if a load resistor is not connected at Connector J7.
This link should be removed if a load resistor is connected at Connector J7.
Alarm_Dir
Rint_Rext
This link selects the alarm current direction.
Position A selects an upscale alarm current (22.8 mA or 24 mA).
Position B selects a downscale alarm current (3.2 mA).
This link selects to use either the internal or external current setting resistor.
Position A selects the internal resistor.
Position B selects the external resistor.
Range0,
Range1
These links select the loop current range.
Range1 Range0 Loop Range
B
B
A
A
B
A
B
A
4 mA to 20 mA
3.8 mA to 21 mA
3.2 mA to 24 mA
3.8 mA to 21 mA
Reg_Sel2,
Reg_Sel1,
Reg_Sel0
These links select the voltage regulator output voltage.
Reg_Sel2 Reg_Sel1 Reg_Sel0 Regulator Output Voltage
B
B
B
B
A
A
A
B
B
A
A
B
B
A
B
A
B
A
B
A
B
1.8 V
2.5 V
3 V
3.3 V
5 V
9 V
12 V
Rev. A | Page 4 of 12
Evaluation Board User Guide
UG-250
EVALUATION BOARD SOFTWARE QUICK START PROCEDURES
SOFTWARE OPERATION
SOFTWARE INSTALLATION
To launch the software, complete the following steps:
The AD5421 evaluation kit includes self-installing software on
a CD. The software is compatible with Windows XP (SP2) and
Vista (32-bit). If the setup file does not run automatically, you
can run setup.exe from the CD.
1. From the Start menu, select Analog Devices – AD5421;
then select AD5421 Evaluation Software. The main
window of the software displays (see Figure 3).
2. If the evaluation system is not connected to the USB port
when the software is launched, or if the AD5421 board is
not connected to the SDP board, a connectivity error
displays (see Figure 2). Simply connect the evaluation
board to the USB port of the PC, wait a number of seconds,
click Rescan, and follow the instructions.
Install the evaluation software before connecting the evaluation
board and SDP board to the USB port of the PC to ensure that
the evaluation system is correctly recognized when connected
to the PC.
1. After installation from the CD is complete, power up the
AD5421 evaluation board as described in the Power
Supplies section.
2. Connect the SDP board to the AD5421 evaluation board
and then to the USB port of your PC using the supplied
cable. Either connector of the SDP board may be used.
3. When the evaluation system is detected, proceed through
any dialog boxes that appear. This finishes the installation.
Figure 2. Connectivity Error Alert
Rev. A | Page 5 of 12
UG-250
Evaluation Board User Guide
Figure 3. Main Window
DAC Register
MAIN WINDOW
The DAC Register tab allows the user to program the DAC
register, offset adjust register, and gain adjust register.
As can be seen in Figure 3, the main window is made up of
5 tabs; Control Register, DAC Register, Fault Register,
Program Loop Current, and Command Write. Outside
of the tab structure at the top right of the window are two
control items; LDAC PIN to set the state of the LDAC pin
and USE PEC to select whether packet error checking is used
in the communications with the AD5421. There is also an
indicator item; PEC Error, this alerts to a packet error in the
data received from the AD5421. At the bottom of the window
is a display of the contents of the fault register, this is updated
on every communication with the AD5421 if Auto Fault
Readback is enabled.
Fault Register
The Fault Register tab allows the user to read the contents
of the fault register. The fault register can also be polled
continuously.
Program Loop Current
The Program Loop Current tab allows the user to program a
loop current value directly by entering the value in milliamps
after having first selected the loop current range that is set by
the Range0 and Range1 link options.
Control Register
Command Write
The Control Register tab is displayed by default. This tab
allows the user to program the control register.
The Command Write tab allows the user to read/write all of the
AD5421s registers as well as issue commands.
Rev. A | Page 6 of 12
Evaluation Board User Guide
UG-250
EVALUATION BOARD SCHEMATICS AND ARTWORK
0 0 4
0
Figure 4. Schematic of the AD5421 Circuitry
Rev. A | Page 7 of 12
UG-250
Evaluation Board User Guide
Figure 5. Schematic of the SDP Board Connector
Rev. A | Page 8 of 12
Evaluation Board User Guide
UG-250
Figure 6. Component Placement Drawing
Figure 7. Component Side PCB Drawing
Rev. A | Page 9 of 12
UG-250
Evaluation Board User Guide
Figure 8. Solder Side PCB Drawing
Rev. A | Page 10 of 12
Evaluation Board User Guide
UG-250
ORDERING INFORMATION
BILL OF MATERIALS
Table 3.
Reference
Designator
Part Description
Part Number
Supplier/Number
FEC 1301894
FEC 1301894
FEC 1301894
FEC 1301894
FEC 1301894
FEC 1301894
FEC 1190114
FEC 1301894
FEC 1301894
FEC 1190115
Digi-Key 475-2557-1-ND
FEC 8734402
FEC 8734402
C5
C6
C7
C8
Capacitor, F/TERM, 100 nF, 50 V, X7R
Capacitor, F/TERM, 100 nF, 50 V, X7R
Capacitor, F/TERM, 100 nF, 50 V, X7R
Capacitor, F/TERM, 100 nF, 50 V, X7R
Capacitor, F/TERM, 100 nF, 50 V, X7R
Capacitor, F/TERM, 100 nF, 50 V, X7R
Capacitor, 1 µF, 16 V, Case A tantalum
Capacitor, F/TERM, 100 nF, 50 V, X7R
Capacitor, F/TERM, 100 nF, 50 V, X7R
Capacitor, 2.2 µF, 16 V, Case A tantalum
LED, yellow, 0603
BAS516, high speed switching diodes
BAS516, high speed switching diodes
Diode ZENER, 4.7 V, 500 MW, SOD-80
Header, TIN, SIL, 32-way
Header, TIN, SIL, 32-way
Header, TIN, SIL, 32-way
2-pin terminal block (5 mm pitch)
120-way connector, 0.6 mm pitch
3-pin terminal block (5 mm pitch)
Ferrite bead chip, series FB FB
Ferrite bead chip, series FB FB
2-pin (0.1" pitch) header and shorting shunt
3-pin SIL header and shorting link
2-pin (0.1" pitch) header and shorting shunt
2-pin (0.1" pitch) header and shorting shunt
2-pin (0.1" pitch) header and shorting shunt
Resistor, 24 kΩ, 0805, 5 ppm
Resistor, 220 kΩ, 5%, 50 V, 0.063W, 0603
Resistor, 1 kΩ, 5%, 50 V, 0.063W, 0603
Resistor, HRC11 0805 18M
MULTICOMP, resistor, 0603 953 kΩ
RESISTOR, 0603, 100 kΩ, 1%
06035C104KAZ2A
06035C104KAZ2A
06035C104KAZ2A
06035C104KAZ2A
06035C104KAZ2A
06035C104KAZ2A
MCCTA105M016
06035C104KAZ2A
06035C104KAZ2A
MCCTA225M016
LY Q971-H1K1-36-0-20-R18
BAS516
BAS516
FLZ4V7A
3-826936-2
3-826936-2
3-826936-2
CTB5000/2
FX8-120S-SV(21)
CTB5000/3
FBMH3225HM102NT
FBMH3225HM102NT
M20-9990246
M20-9990345 and M7567-05
M20-9990246
M20-9990246
C9
C10
C11
C12
C13
C15
D1
D2
D3
D4
J2
J3
J4
J5
J6
J7
L1
L2
Digi-Key FLZ4V7ACT-ND
FEC 5217805 and FEC 1212164 (x7)
FEC 5217805 and FEC 1212164 (x7)
FEC 5217805 and FEC 1212164 (x7)
FEC 151789
FEC 1324660
FEC 151790
FEC 1651731
FEC 1651731
LK1
LK2
LK4
LK6
LK7
R1
FEC 1022247 and FEC 150-411
FEC 1022248 and FEC 150410
FEC 1022247 and FEC 150-411
FEC 1022247 and FEC 150-411
FEC 1022247 and FEC 150-411
FEC 1108901
FEC 9331930
FEC 9331697
Yageo (Phycomp) FEC 9236422
FEC 1171085
FEC 9330402
FEC 9330402
AD5421CREZ
FEC 1214279
ADuM1401ARWZ
ADuM1201ARZ
FEC 9758070
M20-9990246
PCF0805-13-24K-B-T1
MC 0.063W 0603 5% 220K
MC 0.063W 0603 5% 1K
RC0805JR-0718ML
MC 0.063W 0603 1% 953K
MC 0.063W 0603 1% 100K
MC 0.063W 0603 1% 100K
AD5421CREZ
R3
R4
R15
R16
R18
R19
U1
U2
U3
U5
U6
RESISTOR, 0603, 100 kΩ, 1%
Loop powered, 4 mA to 20 mA DAC
Depletion mode, N-channel MOSFET
Digital isolator
Digital isolator
64K I2C serial EEPROM
BSP129
ADUM1401ARWZ
ADuM1201ARZ
24LC64-I/SN
Rev. A | Page 11 of 12
UG-250
NOTES
Evaluation Board User Guide
ESD Caution
ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection
circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.
Legal Terms and Conditions
By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions
set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you
have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc.
(“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal,
temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided
for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional
limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term
“Third Party” includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including
ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may
not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to
promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any
occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board.
Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice
to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO
WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED
TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL
PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF
THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE
AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable
United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of
Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby
submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed.
©2011 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
UG09701-0-10/11(A)
Rev. A | Page 12 of 12
相关型号：
24LC64-I/MCG
8K X 8 I2C/2-WIRE SERIAL EEPROM, PDSO8, 2 X 3 MM, 0.90 MM HEIGHT, LEAD FREE, PLASTIC, MO-229, DFN-8
MICROCHIP
©2020 ICPDF网 联系我们和版权申明