AD8511ARU [ADI]

9- and 11-Channel, Muxed Input LCD Reference Drivers; 9-和11通道,多路复用输入LCD驱动器参考
AD8511ARU
型号: AD8511ARU
厂家: ADI    ADI
描述:

9- and 11-Channel, Muxed Input LCD Reference Drivers
9-和11通道,多路复用输入LCD驱动器参考

外围驱动器 驱动程序和接口 接口集成电路 光电二极管 CD
文件: 总8页 (文件大小:231K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
9- and 11-Channel, Muxed Input  
LCD Reference Buffers  
AD8509/AD8511  
FEATURES  
FUNCTIONAL BLOCK DIAGRAM  
Single-supply operation: 3.3 V to 6.5 V  
High output current: 300 mA  
Low supply current: 6 mA  
INA1  
VO1  
INB1  
Stable with 1000 pF loads  
Pin-compatible with LMC6009  
Pin-compatible with CL-FP6131  
48-lead, Pb-free, TSSOP package  
INA2  
VO2  
INB2  
INA11  
VO11  
INB11  
APPLICATION  
A/B  
LCD line inversion gamma references  
Figure 1.  
GENERAL DESCRIPTION  
PIN CONFIGURATIONS  
The AD8509 and AD8511 are 9-channel and 11-channel LCD  
reference buffers, respectively, designed to drive 64 gray scale  
column drivers. Each buffer has an A/B input to select between  
two voltages for LCD displays. These buffers drive the resistor  
ladders of LCD column drivers for gamma correction. These  
LCD drivers have higher slew rates and higher output drive  
currents than similar competitive parts. This increases the  
stability of the reference ladder, resulting in better gray scale  
and visual performance.  
NC  
NC  
48 NC  
NC  
INA1  
INB1  
INA2  
INB2  
INA3  
INB3  
INA4  
INB4  
INA5  
INB5  
INA6  
INB6  
INA7  
INB7  
INA8  
INB8  
INA9  
INB9  
INA10  
INB10  
NC  
48 NC  
1
2
3
4
5
6
7
8
9
1
2
NC  
NC  
NC  
V
VO1  
47  
46  
45  
44  
43  
42  
41  
40  
39  
38  
37  
36  
35  
34  
33  
32  
47  
46  
45  
44  
43  
42  
41  
NC  
NC  
V
NC  
3
INA1  
INB1  
INA2  
INB2  
INA3  
INB3  
4
5
CC  
CC  
6
GND  
VO1  
VO2  
VO3  
VO4  
GND  
VO2  
VO3  
7
8
9
40 VO4  
INA4 10  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
39  
38  
37  
36  
35  
34  
33  
VO5  
V
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
V
INB4  
INA5  
INB5  
INA6  
INB6  
INA7  
INB7  
INA8  
INB8  
INA9  
INB9  
NC  
CC  
CC  
AD8509  
AD8511  
The AD8509 and AD8511 are specified over the −40°C to +85°C  
temperature range. They are available in 48-lead, thin shrink  
small outline (TSSOP), surface-mount, Pb-free packages in tape  
and reel.  
TOP VIEW  
TOP VIEW  
GND  
VO5  
VO6  
VO7  
VO8  
VO9  
GND  
VO6  
VO7  
VO8  
VO9  
(Not to Scale)  
(Not to Scale)  
32 VO10  
GND  
31 GND  
31  
30  
29  
28  
27  
26  
V
V
30  
29  
28  
27  
26  
25  
CC  
CC  
A/B  
NC  
A/B  
NC  
NC  
NC  
NC  
NC  
NC  
INA11  
INB11  
VO11  
25 NC  
NC = NO CONNECT  
NC  
NC = NO CONNECT  
Figure 2. AD8509 and AD8511 48-Lead TSSOP (RU Suffix)  
Rev. B  
Information furnished by Analog Devices is believed to be accurate and reliable.  
However, no responsibility is assumed by Analog Devices for its use, nor for any  
infringements of patents or other rights of third parties that may result from its use.  
Specifications subject to change without notice. No license is granted by implication  
or otherwise under any patent or patent rights of Analog Devices. Trademarks and  
registered trademarks are the property of their respective owners.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781.329.4700  
Fax: 781.326.8703  
www.analog.com  
© 2005 Analog Devices, Inc. All rights reserved.  
AD8509/AD8511  
TABLE OF CONTENTS  
Specifications..................................................................................... 3  
Electrical Characteristics............................................................. 3  
Absolute Maximum Ratings............................................................ 4  
ESD Caution.................................................................................. 4  
Typical Performance Characteristics ............................................. 5  
Applications....................................................................................... 7  
Outline Dimensions ......................................................................... 8  
Ordering Guide............................................................................. 8  
REVISION HISTORY  
1/05—Rev. A to Rev. B  
Changed Maximum Operating Voltage...........................Universal  
Change to Features List.................................................................... 1  
Changes to Specifications Table...................................................... 3  
Changes to Ordering Guide ............................................................ 8  
9/04—Rev. 0 to Rev. A  
Format Updated..................................................................Universal  
Added Pb-Free Part............................................................Universal  
Changed Temperature Range............................................Universal  
Changed Applications Section........................................................ 1  
Changes to Ordering Guide ............................................................ 8  
10/97—Revision 0: Initial Version  
Rev. B | Page 2 of 8  
AD8509/AD8511  
SPECIFICATIONS  
ELECTRICAL CHARACTERISTICS  
VS = 5 V, TA = 25°C, unless otherwise noted.  
Table 1.  
Parameter  
Symbol  
Conditions  
Min  
Typ  
Max  
Unit  
INPUT CHARACTERISTICS  
Offset Voltage  
Input Bias Current  
Voltage Gain  
VOS  
IB  
AVO  
20  
50  
mV  
nA  
V/V  
0.985  
4.8  
OUTPUT CHARACTERISTICS  
Output Voltage High  
Output Voltage Low  
Output Short-Circuit Current  
POWER SUPPLY  
VOH  
VOL  
ISC  
ILOAD = +20 mA  
ILOAD = −20 mA  
V
mV  
mA  
200  
120  
350  
Load Regulation  
VIN = 0.5 V − 4.5 V, ISOURCE = 20 mA  
VIN = 0.5 V − 4.5 V, ISINK = 20 mA  
AD8509, VIN = 2.5 V  
7
7
mV  
mV  
mA  
mA  
V
Supply Current  
ISY  
ISY  
VS  
8.5  
10  
6.5  
AD8511, VIN = 2.5 V  
Supply Voltage Range  
DYNAMIC PERFORMANCE  
Slew Rate  
3.3  
CL = 15 pF  
RL = 250 Ω  
IDC = 13 mA (sink/source)  
7
6.2  
3
V/µs  
V/µs  
µs  
Settling Time  
tS  
6
LOGIC INPUT CHARACTERISTICS  
Input Current Low  
Input Current High  
Input Voltage Low  
IIL  
IIH  
VIL  
VIH  
1.0  
1.5  
0.8  
µA  
µA  
V
Input Voltage High  
2.0  
V
Rev. B | Page 3 of 8  
 
AD8509/AD8511  
ABSOLUTE MAXIMUM RATINGS  
Table 2.  
Parameter  
Supply Voltage  
Input Voltage  
Storage Temperature Range  
RU Package  
Stresses above those listed under Absolute Maximum Ratings  
may cause permanent damage to the device. This is a stress  
rating only; the functional operation of the device at these or  
any other conditions above those indicated in the operational  
sections of this specification is not implied. Exposure to  
absolute maximum rating conditions for extended periods may  
affect device reliability.  
Rating  
7 V  
GND to VS  
65°C to +150°C  
40°C to +85°C  
Operating Temperature Range  
Junction Temperature Range  
RU Package  
Table 3.  
Package Type  
65°C to +150°C  
300°C  
1
Unit  
θJA  
θJC  
Lead Temperature Range  
(Soldering, 60 sec)  
48-lead Pb-free TSSOP (RU)  
115  
42  
°C/W  
1 θJA is specified for the worst-case conditions, that is, θJA is specified for  
devices soldered in circuit boards for surface-mount packages.  
Table 4. MUX Function  
A/B Select (Pin 29)  
Logic High  
Input  
INAx  
INBx  
Logic Low  
ESD CAUTION  
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on  
the human body and test equipment and can discharge without detection. Although this product features  
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy  
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance  
degradation or loss of functionality.  
Rev. B | Page 4 of 8  
 
AD8509/AD8511  
TYPICAL PERFORMANCE CHARACTERISTICS  
10  
V
T
R
= 5V  
= 25°C  
= NO LOAD  
= 15pF  
V
= 5V  
S
S
R
= NO LOAD  
A
L
9
8
7
6
5
4
3
L
L
C
620mV  
2.5V  
–35  
–15  
5
25  
45  
65  
85  
105  
TEMPERATURE (°C)  
Figure 6. Large Signal Transient Response—Rising  
Figure 3. Supply Current vs. Temperature  
10  
9
8
7
6
5
4
3
2
1
0
V
T
R
C
= 5V  
= 25°C  
= NO LOAD  
= 15pF  
S
A
V
T
R
= 5V  
= 25°C  
= NO LOAD  
S
A
L
L
L
AD8511  
AD8509  
620mV  
2.5V  
0
1
2
3
4
5
COMMON-MODE VOLTAGE (V)  
Figure 7. Large Signal Transient Response—Falling  
Figure 4. Supply Current vs. Common-Mode Voltage  
1k  
100  
10  
V
T
R
C
= 5V  
V
T
= 5V  
= 25°C  
S
A
S
= 25°C  
= 250Ω  
= 15pF  
A
L
L
SOURCE  
SINK  
620mV  
2.5V  
1
0.1  
1
10  
100  
LOAD CURRENT (mA)  
Figure 5. Output Voltage to Supply Rail vs. Load Current  
Figure 8. Large Signal Transient Response—Rising  
Rev. B | Page 5 of 8  
 
AD8509/AD8511  
V
T
R
C
= 5V  
S
A
= 25°C  
= 250Ω  
= 15pF  
L
L
620mV  
2.5V  
Figure 9. Large Signal Transient Response—Falling  
Rev. B | Page 6 of 8  
AD8509/AD8511  
APPLICATIONS  
The AD8509 and AD8511 are CMOS buffers with A/B inputs,  
which are used to select between two different reference voltages  
set up by an external resistor ladder. Input bias currents are  
orders of magnitude less than competitive parts. This allows  
very large resistor ladders to be used to save supply current. A  
guaranteed value of 50 nA is much higher than actual values  
and is limited by leakage in the test system.  
The AD8509 is a 9-channel buffer and is similar to the LMC6009  
in functionality. The AD8511 is an 11-channel buffer similar to  
the CL-FP6131. However, the control to select either 9- or  
11-channel operation, the EN_11 pin of the CL-FP6131, is not  
available on the AD8511. If 9-channel operation is desired, use  
the AD8509.  
Power supply pins on the AD8509 and AD8511 have multiple  
ground and VCC connections. Because of the high peak currents  
that these buffers can deliver, it is strongly recommended that  
all of the ground and VCC pins be connected, and that the VCC  
pins be suitably bypassed.  
Buffer outputs are designed to drive resistive loads. They are  
also stable with capacitive loads, so no resistors should be used  
in series with these outputs to attain the best display perform-  
ance. Outputs have high slew rates and 6 µs settling times. Each  
output can deliver a minimum of 120 mA, assuring fast response  
to varying loads.  
Rev. B | Page 7 of 8  
 
AD8509/AD8511  
OUTLINE DIMENSIONS  
12.60  
12.50  
12.40  
48  
25  
6.20  
6.10  
6.00  
8.10 BSC  
1
24  
PIN 1  
1.20 MAX  
0.15  
0.05  
0.75  
0.60  
0.45  
8°  
0°  
0.50  
BSC  
0.27  
0.17  
SEATING  
PLANE  
0.20  
0.09  
COMPLIANT TO JEDEC STANDARDS MO-153ED  
Figure 10. 48-Lead Thin Shrink Small Outline Package [TSSOP]  
(RU-48)  
Dimensions shown in millimeters  
ORDERING GUIDE  
Model1  
Temperature Range  
−40°C to +85°C  
−40°C to +85°C  
−40°C to +85°C  
−40°C to +85°C  
Package Description  
Package Option  
RU-48  
RU-48  
RU-48  
RU-48  
AD8509ARU-REEL  
AD8509ARUZ-REEL2  
AD8511ARU-REEL  
AD8511ARUZ-REEL2  
48-Lead Thin Shrink Small Outline Package  
48-Lead Thin Shrink Small Outline Package  
48-Lead Thin Shrink Small Outline Package  
48-Lead Thin Shrink Small Outline Package  
1 All models only available in 2,500-piece reels.  
2 Z = Pb-free part.  
©
2005 Analog Devices, Inc. All rights reserved. Trademarks and  
registered trademarks are the property of their respective owners.  
C03237–0–1/05(B)  
Rev. B | Page 8 of 8  
 
 
 
 

相关型号:

AD8511ARU-REEL

9- and 11-Channel, Muxed Input LCD Reference Drivers
ADI

AD8511ARU-REEL

0.35A 11 CHANNEL, BUF OR INV BASED PRPHL DRVR, PDSO48, MO-153ED, TSSOP-48
ROCHESTER

AD8511ARUZ-REEL

9- and 11-Channel, Muxed Input LCD Reference Drivers
ADI

AD8511ARUZ-REEL

0.35A 11 CHANNEL, BUF OR INV BASED PRPHL DRVR, PDSO48, LEAD FREE, MO-153ED, TSSOP-48
ROCHESTER

AD8512

Precision, Very Low Noise, Low Input Bias Current, Wide Bandwidth JFET Operational Amplifiers
ADI

AD8512A

Operational Amplifiers Selection Guide
ADI

AD8512AR

Precision, Very Low Noise, Low Input Bias Current, Wide Bandwidth JFET Operational Amplifiers
ADI

AD8512AR

DUAL OP-AMP, 1800 uV OFFSET-MAX, 8 MHz BAND WIDTH, PDSO8, MS-012AA, SOIC-8
ROCHESTER

AD8512AR-REEL

Precision, Very Low Noise, Low Input Bias Current, Wide Bandwidth JFET Operational Amplifiers
ADI

AD8512AR-REEL7

Precision, Very Low Noise, Low Input Bias Current, Wide Bandwidth JFET Operational Amplifiers
ADI

AD8512AR-REEL7

DUAL OP-AMP, 1800 uV OFFSET-MAX, 8 MHz BAND WIDTH, PDSO8, MS-012AA, SOIC-8
ROCHESTER

AD8512ARM-R2

Precision, Very Low Noise, Low Input Bias Current, Wide Bandwidth JFET Operational Amplifiers
ADI