AD8539_15 [ADI]
Low Power, Precision, Auto-Zero Op Amps;型号: | AD8539_15 |
厂家: | ADI |
描述: | Low Power, Precision, Auto-Zero Op Amps |
文件: | 总24页 (文件大小:797K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Low Power, Precision, Auto-Zero Op Amps
Data Sheet
AD8538/AD8539
FEATURES
PIN CONFIGURATIONS
Low offset voltage: 13 µV maximum
Input offset drift: 0.03 µV/°C
Single-supply operation: 2.7 V to 5.5 V
High gain, CMRR, and PSRR
OUT
V–
1
2
3
5
V+
AD8538
TOP VIEW
(Not to Scale)
+IN
4
–IN
Low input bias current: 25 pA
Low supply current: 180 µA
Figure 1. 5-Lead TSOT-23 (UJ-5)
Qualified for automotive applications
NC
−IN
+IN
V−
1
2
3
4
8
7
6
5
NC
V+
APPLICATIONS
AD8538
OUT
NC
Mobile communications
Portable instrumentation
Battery-powered devices
Sensor interfaces
TOP VIEW
(Not to Scale)
NC = NO CONNECT
Figure 2. 8-Lead SOIC_N (R-8)
Temperature measurement
Electronic scales
OUT A
–IN A
+IN A
V–
1
2
3
4
8
7
6
5
V+
AD8539
OUT B
–IN B
+IN B
GENERAL DESCRIPTION
TOP VIEW
(Not to Scale)
The AD8538/AD8539 are very high precision amplifiers featuring
extremely low offset voltage, low input bias current, and low power
consumption. The supply current is less than 215 μA maximum
per amplifier at 5.0 V. Operation is fully specified from 2.7 V to
5.0 V single supply ( 1.35 V to 2.5 V dual supply).
Figure 3. 8-Lead SOIC_N (R-8)
OUT A
–IN A
+IN A
V–
1
2
3
4
8
7
6
5
V+
AD8539
OUT B
–IN B
+IN B
The AD8538/AD8539 operate at very low power making these
amplifiers ideal for battery-powered devices and portable
equipment.
TOP VIEW
(Not to Scale)
Figure 4. 8-Lead MSOP (RM-8)
The AD8538/AD8539 are specified over the extended industrial
temperature range (−40°C to +125°C). The AD8538 amplifier is
available in 5-lead TSOT-23, and 8-lead, narrow body SOIC
packages, and the AD8539 amplifier is available in 8-lead, narrow
body SOIC and 8-lead MSOP. See the Ordering Guide for the
automotive part.
Rev. B
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2005–2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
AD8538/AD8539
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Absolute Maximum Ratings ............................................................7
Thermal Resistance.......................................................................7
ESD Caution...................................................................................7
Typical Performance Characteristics ..............................................8
AD8538 Characteristics................................................................8
AD8539 Characteristics............................................................. 14
Outline Dimensions....................................................................... 20
Ordering Guide .......................................................................... 21
Applications....................................................................................... 1
General Description ......................................................................... 1
Pin Configuration Diagrams........................................................... 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
AD8538 Electrical Specifications ............................................... 3
AD8539 Electrical Specifications ............................................... 5
REVISION HISTORY
2/13—Rev. A to Rev. B
Added Table 4, Renumbered Tables Sequentially .........................6
Changes to Thermal Resistance Section ........................................7
Added Figure 32 and Figure 33 .................................................... 13
Added AD8539 Characteristics Section, Renumbered Figures
Sequentially ..................................................................................... 14
Updated Outline Dimensions....................................................... 20
Changes to Ordering Guide.......................................................... 21
Changes to Features Section and General Description Section ... 1
Updated Outline Dimensions....................................................... 20
Changes to Ordering Guide .......................................................... 21
Added Automotive Products Section........................................... 21
5/07—Rev. 0 to Rev. A
Added AD8539 ...................................................................Universal
Changes to Specifications Section.................................................. 3
Added Table 3, Renumbered Tables Sequentially ........................ 5
10/05—Revision 0: Initial Version
Rev. B | Page 2 of 24
Data Sheet
AD8538/AD8539
SPECIFICATIONS
AD8538 ELECTRICAL SPECIFICATIONS
@ VS = 5.0 V, VCM = 2.5 V, VO = 2.5 V, TA = 25°C, unless otherwise specified.
Table 1.
Parameter
Symbol
Conditions
Min
Typ
Max
Unit
INPUT CHARACTERISTICS
Offset Voltage
VOS
IB
5
13
30
25
100
1.0
50
150
5
µV
µV
pA
pA
nA
pA
pA
V
−40°C ≤ TA ≤ +125°C
Input Bias Current
15
35
0.7
20
−40°C ≤ TA ≤ +85°C
−40°C ≤ TA ≤ +125°C
Input Offset Current
IOS
−40°C ≤ TA ≤ +125°C
Input Voltage Range
0
Common-Mode Rejection Ratio
CMRR
AVO
VCM = 0 V to 5 V
115
100
115
110
150
135
141
135
0.03
dB
dB
dB
dB
µV/°C
−40°C ≤ TA ≤ +125°C, VCM = 0.2 V to 4.8 V
RL = 10 kΩ, VO = 0.1 V to 4.9 V
−40°C ≤ TA ≤ +125°C
Large Signal Voltage Gain
Offset Voltage Drift
−40°C ≤ TA ≤ +125°C
0.1
∆VOS/∆T
VOH
OUTPUT CHARACTERISTICS
Output Voltage High
RL = 100 kΩ to ground
−40°C ≤ TA ≤ +125°C, RL = 100 kΩ to ground
RL = 10 kΩ to ground
−40°C ≤ TA ≤ +125°C, RL = 10 kΩ to ground
RL = 100 kΩ to V+
−40°C ≤ TA ≤ +125°C, RL = 100 kΩ to V+
RL = 10 kΩ to V+
4.99
4.98
4.95
4.94
4.998
4.970
V
V
V
V
mV
mV
mV
mV
mA
Output Voltage Low
VOL
1.9
2.8
17
20
25
5
7
20
30
−40°C ≤ TA ≤ +125°C, RL = 10 kΩ to V+
Short-Circuit Limit
POWER SUPPLY
ISC
Power Supply Rejection Ratio
PSRR
ISY
VS = 2.7 V to 5.0 V
−40°C ≤ TA ≤ +125°C
IO = 0
105
100
125
125
150
190
dB
dB
µA
µA
Supply Current/Amplifier
180
215
−40°C ≤ TA ≤ +125°C
DYNAMIC PERFORMANCE
Slew Rate
Settling Time 0.01%
Overload Recovery Time
Gain Bandwidth Product
Phase Margin
SR
tS
RL =10 kΩ
G = 1, 2 V step, CL = 20 pF, RL = 1 kΩ
0.4
10
0.05
430
65
V/µs
μs
ms
kHz
Degrees
GBP
ØM
RL = 10 kΩ, RL = 100 kΩ, CL = 20 pF
NOISE PERFORMANCE
Voltage Noise
Voltage Noise Density
en p-p
en
f = 0.1 Hz to 10 Hz
f = 1 kHz
2.0
50
µV p-p
nV/√Hz
Rev. B | Page 3 of 24
AD8538/AD8539
Data Sheet
@ VS = 2.7 V, VCM = 1.35 V, VO = 1.35 V, TA = 25°C, unless otherwise specified.
Table 2.
Parameter
Symbol
Conditions
Min
Typ
Max
Unit
INPUT CHARACTERISTICS
Offset Voltage
VOS
IB
5
13
30
25
100
1.0
50
150
2.7
µV
µV
pA
pA
nA
pA
pA
V
−40°C ≤ TA ≤ +125°C
Input Bias Current
15
35
0.7
20
−40°C ≤ TA ≤ +85°C
−40°C ≤ TA ≤ +125°C
Input Offset Current
IOS
−40°C ≤ TA ≤ +125°C
Input Voltage Range
0
Common-Mode Rejection Ratio
CMRR
AVO
VCM = 0 V to 2.5 V
110
100
110
105
140
135
140
135
0.03
dB
dB
dB
dB
µV/°C
−40°C ≤ TA ≤ +125°C
RL = 10 kΩ, VO = 0.1 V to 1.7 V
−40°C ≤ TA ≤ +125°C
−40°C ≤ TA ≤ +125°C
Large Signal Voltage Gain
Offset Voltage Drift
0.1
∆VOS/∆T
VOH
OUTPUT CHARACTERISTICS
Output Voltage High
RL = 100 kΩ to ground
−40°C ≤ TA ≤ +125°C, RL = 100 kΩ to ground
RL = 10 kΩ to ground
−40°C ≤ TA ≤ +125°C, RL = 10 kΩ to ground
RL = 100 kΩ to V+
−40°C ≤ TA ≤ +125°C, RL = 100 kΩ to V+
RL = 10 kΩ to V+
2.68
2.68
2.67
2.66
2.698
2.68
V
V
V
V
mV
mV
mV
mV
mA
Output Voltage Low
VOL
1.7
2.4
14
20
8
5
5
20
25
−40°C ≤ TA ≤ +125°C, RL = 10 kΩ to V+
Short-Circuit Limit
POWER SUPPLY
ISC
Power Supply Rejection Ratio
PSRR
ISY
VS = 2.7 V to 5.5 V
−40°C ≤ TA ≤ +125°C
IO = 0
105
100
125
125
150
190
dB
dB
µA
µA
Supply Current/Amplifier
180
215
−40°C ≤ TA ≤ +125°C
DYNAMIC PERFORMANCE
Slew Rate
Settling Time 0.01%
Overload Recovery Time
Gain Bandwidth Product
Phase Margin
SR
tS
RL = 10 kΩ
G = 1, 1 V step, CL = 20 pF, RL = 1 kΩ
0.35
5
0.05
430
65
V/µs
μs
ms
kHz
Degrees
GBP
ØM
RL = 10 kΩ, RL = 100 kΩ, CL = 20 pF
NOISE PERFORMANCE
Voltage Noise
Voltage Noise Density
en p-p
en
f = 0.1 Hz to 10 Hz
f = 1 kHz
2.0
50
µV p-p
nV/√Hz
Rev. B | Page 4 of 24
Data Sheet
AD8538/AD8539
AD8539 ELECTRICAL SPECIFICATIONS
@ VS = 5.0 V, VCM = 2.5 V, VO = 2.5 V, TA = 25°C, unless otherwise specified.
Table 3.
Parameter
Symbol
Conditions
Min
Typ
Max
Unit
INPUT CHARACTERISTICS
Offset Voltage
VOS
IB
5
15
30
60
125
1.0
70
400
5
µV
µV
pA
pA
nA
pA
pA
V
−40°C ≤ TA ≤ +125°C
Input Bias Current
15
35
0.7
20
−40°C ≤ TA ≤ +85°C
−40°C ≤ TA ≤ +125°C
Input Offset Current
IOS
−40°C ≤ TA ≤ +125°C
Input Voltage Range
0
0.2
−40°C ≤ TA ≤ +125°C
4.8
V
Common-Mode Rejection Ratio
Large Signal Voltage Gain
Offset Voltage Drift
CMRR
AVO
VCM = 0 V to 5 V
115
100
110
110
135
130
130
125
0.03
dB
dB
dB
dB
µV/°C
−40°C ≤ TA ≤ +125°C, VCM = 0.2 V to 4.8 V
RL = 10 kΩ, VO = 0.1 V to 4.9 V
−40°C ≤ TA ≤ +125°C
−40°C ≤ TA ≤ +125°C
0.1
∆VOS/∆T
VOH
OUTPUT CHARACTERISTICS
Output Voltage High
RL = 100 kΩ to ground
−40°C ≤ TA ≤ +125°C, RL = 100 kΩ to ground
RL = 10 kΩ to ground
−40°C ≤ TA ≤ +125°C, RL = 10 kΩ to ground
RL = 100 kΩ to V+
−40°C ≤ TA ≤ +125°C, RL = 100 kΩ to V+
RL = 10 kΩ to V+
4.99
4.98
4.95
4.94
4.994
4.97
V
V
V
V
mV
mV
mV
mV
mA
Output Voltage Low
VOL
5
6
20
24
25
7
8
25
30
−40°C ≤ TA ≤ +125°C, RL = 10 kΩ to V+
Short-Circuit Limit
POWER SUPPLY
ISC
Power Supply Rejection Ratio
PSRR
ISY
VS = 2.7 V to 5.0 V
−40°C ≤ TA ≤ +125°C
IO = 0
105
100
125
125
170
dB
dB
µA
µA
Supply Current/Amplifier
210
225
−40°C ≤ TA ≤ +125°C
DYNAMIC PERFORMANCE
Slew Rate
Settling Time 0.01%
Overload Recovery Time
Gain Bandwidth Product
Phase Margin
SR
tS
RL =10 kΩ
G = 1, 2 V step, CL = 20 pF, RL = 1 kΩ
0.4
10
0.05
430
65
V/µs
μs
ms
kHz
Degrees
GBP
ØM
RL = 10 kΩ, RL = 100 kΩ, CL = 20 pF
NOISE PERFORMANCE
Voltage Noise
Voltage Noise Density
en p-p
en
f = 0.1 Hz to 10 Hz
f = 1 kHz
1.2
52
µV p-p
nV/√Hz
Rev. B | Page 5 of 24
AD8538/AD8539
Data Sheet
@ VS = 2.7 V, VCM = 1.35 V, VO = 1.35 V, TA = 25°C, unless otherwise specified.
Table 4.
Parameter
Symbol
Conditions
Min
Typ
Max
Unit
INPUT CHARACTERISTICS
Offset Voltage
VOS
IB
5
16
30
25
125
1.0
50
300
2.7
2.5
µV
µV
pA
pA
nA
pA
pA
V
−40°C ≤ TA ≤ +125°C
Input Bias Current
15
35
0.7
20
−40°C ≤ TA ≤ +85°C
−40°C ≤ TA ≤ +125°C
Input Offset Current
IOS
−40°C ≤ TA ≤ +125°C
Input Voltage Range
0
−40°C ≤ TA ≤ +125°C
VCM = 0 V to 2.7 V
−40°C ≤ TA ≤ +125°C, VCM = 0.2 V to 2.5 V
RL = 10 kΩ, VO = 0.1 V to 2.6 V
−40°C ≤ TA ≤ +125°C
0.2
110
100
110
105
Common-Mode Rejection Ratio
Large Signal Voltage Gain
Offset Voltage Drift
CMRR
AVO
130
125
130
125
0.03
dB
dB
dB
dB
−40°C ≤ TA ≤ +125°C
0.1
µV/°C
∆VOS/∆T
VOH
OUTPUT CHARACTERISTICS
Output Voltage High
RL = 100 kΩ to ground
−40°C ≤ TA ≤ +125°C, RL = 100 kΩ to ground
RL = 10 kΩ to ground
−40°C ≤ TA ≤ +125°C, RL = 10 kΩ to ground
RL = 100 kΩ to V+
−40°C ≤ TA ≤ +125°C, RL = 100 kΩ to V+
RL = 10 kΩ to V+
2.68
2.68
2.67
2.66
2.693
2.68
V
V
V
V
mV
mV
mV
mV
mA
Output Voltage Low
VOL
5
6
14
20
8
7
8
20
25
−40°C ≤ TA ≤ +125°C, RL = 10 kΩ to V+
Short-Circuit Limit
POWER SUPPLY
ISC
Power Supply Rejection Ratio
PSRR
ISY
VS = 2.7 V to 5.5 V
−40°C ≤ TA ≤ +125°C
IO = 0
105
100
125
125
dB
dB
µA
µA
Supply Current/Amplifier
210
225
−40°C ≤ TA ≤ +125°C
DYNAMIC PERFORMANCE
Slew Rate
Settling Time 0.01%
Overload Recovery Time
Gain Bandwidth Product
Phase Margin
SR
tS
RL = 10 kΩ
G = 1, 1 V step, CL = 20 pF, RL = ∞
0.35
8
0.05
430
65
V/µs
μs
ms
kHz
Degrees
GBP
ØM
RL = 10 kΩ, RL = 100 kΩ, CL = 20 pF
NOISE PERFORMANCE
Voltage Noise
Voltage Noise Density
en p-p
en
f = 0.1 Hz to 10 Hz
f = 1 kHz
2.0
55
µV p-p
nV/√Hz
Rev. B | Page 6 of 24
Data Sheet
AD8538/AD8539
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
THERMAL RESISTANCE
Table 5.
Parameter
θJA is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Rating
Supply Voltage
Input Voltage
Differential Input Voltage
Output Short-Circuit Duration to GND Observe derating curve
Storage Temperature Range
Lead Temperature (Soldering, 60 sec)
Operating Temperature Range
Junction Temperature Range
+6 V
Table 6. Thermal Characteristics
Package Type
VSS − 0.3 V to VDD + 0.3 V
6 V
θJA
θJC
61
43
45
Unit
°C/W
°C/W
°C/W
5-Lead TSOT-23 (UJ-5)
8-Lead SOIC_N (R-8)
8-Lead MSOP (RM-8)
207
125
145
–65°C to +150°C
300°C
–40°C to +125°C
−65°C to +150°C
ESD CAUTION
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Absolute maximum ratings apply at 25°C, unless otherwise noted.
Rev. B | Page 7 of 24
AD8538/AD8539
Data Sheet
TYPICAL PERFORMANCE CHARACTERISTICS
AD8538 CHARACTERISTICS
AD8538 only, VSY = 5 V or 2.5 V, unless otherwise noted.
450
700
600
500
400
300
200
100
0
V
= 5V AND 2.7V
V
= 5V
SY
SY
0V < V
< 5V
CM
= 25°C
400
350
300
250
200
150
100
50
T
A
0
–10.0–8.4 –6.8 –5.2 –3.6 –2.0 –0.4 1.2 2.8 4.4 6.0 7.6 9.2
25
45
65
85
105
125
INPUT OFFSET VOLTAGE (µV)
TEMPERATURE (°C)
Figure 5. AD8538 Input Offset Voltage Distribution
Figure 8. AD8538 Input Bias Current vs. Temperature
14
12
10
8
160
140
120
100
80
V
= 5V
SY
–40°C < T < +125°
T
= 25°C
A
C
A
6
60
4
40
2
20
0
0
0
0.012 0.024 0.036 0.048 0.060 0.072 0.084 0.096
0
5
1
2
3
4
TCV (µV/°C)
OS
SUPPLY VOLTAGE (V)
Figure 9. AD8538 Supply Current vs. Supply Voltage
Figure 6. AD8538 Input Offset Voltage Drift Distribution
10
8
200
150
100
50
V
T
= 5V
SY
= 25°C
A
6
V
= 5V
SY
4
V
= 2.7V
SY
2
0
–2
–4
–6
–8
–10
0
–40
0
1
2
3
4
5
10
60
TEMPERATURE (°C)
110
INPUT COMMON-MODE VOLTAGE (V)
Figure 7. AD8538 Input Offset Voltage vs. Input Common-Mode Voltage
Figure 10. AD8538 Supply Current vs. Temperature
Rev. B | Page 8 of 24
Data Sheet
AD8538/AD8539
10000
70
60
50
40
30
20
10
0
V
= 5V
SY
= 25°C
T
135
A
1000
100
10
V
– V
V
SY
OH
90
OL
SOURCE
45
ФM
1
0
SINK
0.1
V
R
C
= ±2.5V AND ±1.35V
= 100kΩ
= 20pF
SY
–10
–20
L
L
–45
1M
0.01
0.001
0.01
0.1
LOAD CURRENT (mA)
1
10
1k
10k
100k
FREQUENCY (Hz)
Figure 11. AD8538 Output Saturation Voltage vs. Load Current
Figure 14. AD8538 Open-Loop Gain and Phase vs. Frequency
120
35
V
R
= 5V
= 10kΩ
V
T
= 5V AND 2.7V
SY
SY
= 25°C
L
A
30
25
20
15
10
5
100
80
60
40
20
0
V
– V
OH
SY
V
OL
0
100
1k
10k
100k
1M
–40 –25 –10
5
20
35
50
65
80
95 110 125
FREQUENCY (Hz)
TEMPERATURE (°C)
Figure 12. AD8538 Output Saturation Voltage vs. Temperature
Figure 15. AD8538 CMRR vs. Frequency
100
80
60
40
20
0
60
V
T
= ±2.5V AND ±1.35V
V
C
R
= 5V AND 2.7V
= 20pF
= 2kΩ
SY
= 25°C
SY
A
L
L
A
A
= 100
= 10
V
V
40
20
+PSRR
–PSRR
A
= 1
V
0
–20
1k
100
1k
10k
FREQUENCY (Hz)
100k
1M
10k
100k
1M
FREQUENCY (Hz)
Figure 16. AD8538 PSRR vs. Frequency
Figure 13. AD8538 Closed-Loop Gain vs. Frequency
Rev. B | Page 9 of 24
AD8538/AD8539
Data Sheet
1000
V
= 5V
= 1
= 300pF
= 10kΩ
V
= 5V AND 2.7V
SY
SY
A
C
R
V
L
L
A
= 100
V
100
10
A
= 10
V
A
= 1
V
1
0.1
0.01
100
1k
10k
100k
1M
TIME (4µs/DIV)
FREQUENCY (Hz)
Figure 20. AD8538 Large Signal Transient Response
Figure 17. AD8538 Closed-Loop Output Impedance vs. Frequency
60
V
A
= 5V
= –50
SY
V
= 5V
= 25°C
= 2kΩ
SY
V
T
A
100
0
R
L
50
40
30
20
10
0
OS+
0
OS–
–2.5
1
10
100
1000
TIME (10µs/DIV)
LOAD CAPACITANCE (pF)
Figure 21. AD8538 Positive Overload Recovery
Figure 18. AD8538 Small Signal Overshoot vs. Load Capacitance
V
A
= 5V
= –50
SY
V
= 5V AND 2.7V
= 1
= 300pF
= 2kΩ
SY
V
A
C
R
V
L
L
0
–100
2.5
0
TIME (10µs/DIV)
TIME (4µs/DIV)
Figure 22. AD8538 Negative Overload Recovery
Figure 19. AD8538 Small Signal Transient Response
Rev. B | Page 10 of 24
Data Sheet
AD8538/AD8539
1000
V
= 5V
SY
= 25°C
V
IN
T
A
V
OUT
100
V
= 5V
SY
A
= 1
V
V
= 6V p-p
IN
R
= 10kΩ
L
10
10
100
1k
10k
TIME (200µs/DIV)
FREQUENCY (Hz)
Figure 25. AD8538 No Phase Reversal
Figure 23. AD8538 Voltage Noise Density
V
= 5V AND 2.7V
SY
TIME (1s/DIV)
Figure 24. AD8538 0.1 Hz to 10 Hz Input Voltage Noise
Rev. B | Page 11 of 24
AD8538/AD8539
Data Sheet
VSY = 2.7 V or 1.35 V, AD8538 only, unless otherwise noted.
180
10000
1000
100
10
V
= 2.7V
V
T
= 2.7V
SY
SY
= 25°C
0V < V
< 2.7V
A
160
140
120
100
80
CM
= 25°C
T
A
60
SOURCE
SINK
40
1
20
0
0.1
0.001
–10.0–8.4 –6.8 –5.2 –3.6 –2.0 –0.4 1.2 2.8 4.4 6.0 7.6 9.2
0.01
0.1
1
INPUT OFFSET VOLTAGE (µV)
LOAD CURRENT (mA)
Figure 26. AD8538 Input Offset Voltage Distribution
Figure 29. AD8538 Output Saturation Voltage vs. Load Current
35
30
25
20
15
10
5
30
V
R
= 2.7V
= 10kΩ
SY
V
= 2.7V
SY
L
–40°C < T < +125°C
A
25
20
15
10
5
V
= VOH
SY
VOL
0
0
0
0.012 0.024 0.036 0.048 0.060 0.072 0.084 0.096
–40 –25 –10
5
20
35
50
65
80
95 110 125
TCV (µV/°C)
OS
TEMPERATURE (°C)
Figure 30. AD8538 Output Saturation Voltage vs. Temperature
Figure 27. AD8538 Input Offset Voltage Drift Distribution
80
10
8
V
T
R
= 2.7V
= 25°C
= 2kΩ
V
T
= 2.7V
SY
SY
= 25°C
A
A
70
60
50
40
30
20
10
0
L
6
4
2
0
–2
–4
–6
–8
–10
OS+
OS–
1
1000
0
0.5
1.0
1.5
2.0
2.5
10
100
LOAD CAPACITANCE (pF)
INPUT COMMON-MODE VOLTAGE (V)
Figure 31. AD8538 Small Signal Overshoot vs. Load Capacitance
Figure 28. AD8538 Input Offset Voltage vs. Input Common-Mode Voltage
Rev. B | Page 12 of 24
Data Sheet
AD8538/AD8539
1000
100
10
V
= 2.7V
= 1
= 100pF
= 10kΩ
SY
V
= 2.7V
SY
= 25°C
A
C
R
V
L
L
T
A
10
100
1k
10k
100k
TIME (4µs/DIV)
FREQUENCY (Hz)
Figure 32. AD8538 Large Signal Transient Response
Figure 33. AD8538 Voltage Noise Density
Rev. B | Page 13 of 24
AD8538/AD8539
Data Sheet
AD8539 CHARACTERISTICS
AD8539 only, VS = 5 V or ±±25 V, unless otherwise noted2
800
1000.0
100.0
10.0
1.0
AD8539
AD8539
= 5V
V
= 5V
V
SY
SY
700
600
500
400
300
200
100
0
0 < V
< 5V
CM
= 25°C
T
A
0.1
0.01
–10 –9 –8 –7 –6 –5 –4 –3 –2 –1
0
1
2
3
4
5
6
7
8
9
10
5
25
45
65
85
105
125
V
(µV)
TEMPERATURE (°C)
OS
Figure 34. AD8539 Input Offset Voltage Distribution
Figure 37. AD8539 Input Bias Current vs. Temperature
60
50
40
30
20
10
0
400
350
AD8539
AD8539
V
= ±2.5V
SY
–40°C < V
V
= 0V TO 5V
SY
–40°C < T < +125°C
+125°C
< 125°C
CM
A
300
250
200
150
100
50
+85°C
+25°C
–40°C
0
0
0.5
1.0 1.5
2.0
V
2.5
(V)
3.0
3.5
4.0
4.5
5.0
0
0.016
0.032
0.048
0.064
0.080
0.096
TCV (µV)
OS
SY
Figure 35. AD8539 Input Offset Voltage Drift Distribution
Figure 38. AD8539 Supply Current vs. Supply Voltage
20
400
375
AD8539
= 5V
AD8539
V
SY
0V < V
< 5V
CM
= 25°C
T
A
10
0
350
325
300
275
250
225
200
V
= ±2.5V
SY
V
= ±1.35V
SY
–10
–20
0
1
2
3
4
5
–40 –25 –10
5
20
35
50
65
80
95 110 125
V
(V)
TEMPERATURE (°C)
CM
Figure 39. AD8539 Supply Current vs. Temperature
Figure 36. AD8539 Input Offset Voltage vs. Input Common-Mode Voltage
Rev. B | Page 14 of 24
Data Sheet
AD8538/AD8539
10000
120
100
80
120
100
80
AD8539
SOURCE, V = ± 2.5V
S
1000
100
SINK, V = ± 1.35V
S
60
60
40
40
SOURCE, V = ± 1.35V
20
20
S
SINK, V = ± 2.5V
S
0
0
–20
–40
–60
–80
–100
–120
–20
–40
–60
–80
–100
–120
10
1
AD8539
= ±2.5V
V
SY
R
C
= 2kΩ
= 20pF
L
L
0.1
0.001
0.01
0.1
I
1
10
100
1k
10k
100k
FREQUENCY (Hz)
1M
10M
(mA)
LOAD
Figure 40. AD8539 Output Saturation Voltage vs. Load Current
Figure 43. AD8539 Open-Loop Gain and Phase vs. Frequency
140
35
AD8539
= ±2.5V
AD8539
V
SY
CHANNEL B
V
= 5V
S
120
100
30
25
20
15
10
5
V
- V , I = 250µA, R = 10kΩ
OH
DD
L
L
CHANNEL A
80
60
40
20
0
V
, I = 250µA, R = 10kΩ
OL
L
L
V
- V , I = 25µA, R = 100kΩ
DD
OH
L
L
V
, I = 25µA, R = 100kΩ
OL
L
L
0
–40 –25 –10
5
20
35
50
65
80
95 110 125
100
1k
10k
100k
1M
10M
TEMPERATURE (°C)
FREQUENCY (Hz)
Figure 44. AD8539 CMRR vs. Frequency
Figure 41. AD8539 Output Saturation Voltage vs. Temperature
60
120
100
80
AD8539
= ±2.5V
AD8539
V
SY
V
R
C
= ±2.5V
= 2kΩ
SY
A
= 100
= 10
V
L
L
40
20
= 20pF
PSRR–
A
V
PSRR+
60
40
A
= 1
V
0
20
–20
0
–40
100
–20
100
1k
10k
100k
1M
10M
1k
10k
100k
1M
10M
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 45. AD8539 PSRR vs. Frequency
Figure 42. AD8539 Closed-Loop Gain vs. Frequency
Rev. B | Page 15 of 24
AD8538/AD8539
Data Sheet
1000
AD8539
= 5V
AD8539
V
900
800
700
600
500
400
300
SY
V
= ±2.5V
SY
A
C
R
= 1
= 300pF
= 10kΩ
V
L
L
A
= 100
A
= 10
V
A
= 1
V
V
200
100
0.01
100
TIME (4µs/DIV)
1k
10k
100k
1M
10M
FREQUENCY (Hz)
Figure 46. AD8539 Closed-Loop Output Impedance vs. Frequency
Figure 49. AD8539 Large Signal Transient Response
60
0.15
0.10
5
AD8539
AD8539
V
= ±2.5V
SY
V
= ±2.5V
A = –50
V
SY
4
R
= 2kΩ
50
40
30
20
10
0
L
0.05
3
INPUT VOLTAGE
0
2
–0.05
–0.10
–0.15
–0.20
–0.25
1
OS+
0
–1
–2
–3
OS–
OUTPUT VOLTAGE
1
10
100
1k
TIME (20µs/DIV)
CAPACITANCE (pF)
Figure 50. AD8539 Positive Overload Recovery
Figure 47. AD8539 Small Signal Overshoot vs. Load Capacitance
0.05
0
7.5
6.5
5.5
4.5
3.5
2.5
1.5
0.5
–0.5
AD8539
V
= 5V
SY
A
C
R
= 1
= 300pF
= 2kΩ
V
L
L
INPUT VOLTAGE
AD8539
–0.05
–0.10
–0.15
–0.20
–0.25
–0.30
–0.35
V
= ±2.5V
SY
A
= –50
V
OUTPUT VOLTAGE
TIME (2µs/DIV)
TIME (20µs/DIV)
Figure 48. AD8539 Small Signal Transient Response
Figure 51. AD8539 Negative Overload Recovery
Rev. B | Page 16 of 24
Data Sheet
AD8538/AD8539
1k
AD8539
AD8539
V
= ±2.5V
V
= ±2.5V
SY
SY
A
R
= 1
= 10kΩ
V
L
INPUT VOLTAGE
OUTPUT
VOLTAGE
100
10
100
TIME (200µs/DIV)
1k
10k
FREQUENCY (Hz)
100k
Figure 52. AD8539 Voltage Noise Density
Figure 54. AD8539 No Phase Reversal
0.8
0.6
0.4
0
–20
AD8539
AD8539
= ±2.5V
V
= 5V
SY
V
SY
A
= 1M
V
–40
–60
0.2
0
–80
–100
–120
–0.2
–0.4
–0.6
–0.8
–140
–160
100
1k
10k
FREQUENCY (Hz)
100k
–5
–4
–3
–2
–1
0
1
2
3
4
5
TIME (1s/DIV)
Figure 55. AD8539 Channel Separation vs. Frequency
Figure 53. AD8539 0.1 Hz to 10 Hz Input Voltage Noise
Rev. B | Page 17 of 24
AD8538/AD8539
Data Sheet
VS = 2.7 V or 1.35 V, TA = 25°C, AD8539 only, unless otherwise noted.
350
35
AD8539
AD8539
V
= 2.7V
V
= 2.7V
SY
0V < V
SY
300
250
< 2.7V
30
25
CM
= 25°C
T
A
V
– V , R = 10kΩ
OH
DD
L
200
150
100
50
20
15
10
5
V
, R = 10kΩ
L
OL
V
– V , R = 100kΩ
DD
OH
L
V
, R = 100kΩ
OL
L
0
0
–40 –25 –10
5
20
35
50
65
80
95 110 125
–10 –9 –8 –7 –6 –5 –4 –3 –2 –1
0 1 2 3 4 5 6 7 8 9 10
TEMPERATURE (°C)
V
OS
Figure 56. AD8539 Input Offset Voltage Distribution
Figure 59. AD8539 Output Saturation Voltage vs. Temperature
45
40
80
AD8539
AD8539
V
= ±1.35V
V
= ±1.35V
SY
–40°C < T < +125°C
SY
70
60
50
40
30
20
10
0
R
= 2kΩ
A
L
35
30
25
20
15
OS+
10
5
OS–
0
1
10
100
1k
0
0.016
0.032
0.048
0.064
0.080
0.096
CAPACITANCE (pF)
TCV (µV)
OS
Figure 57. AD8539 Input Offset Voltage Drift Distribution
Figure 60. AD8539 Small Signal Overshoot vs. Load Capacitance
20
AD8539
AD8539
= 2.7V
V
= ±1.35V
SY
V
15
10
5
SY
0V < V
A
C
R
= 1
= 300pF
= 10kΩ
V
L
L
< 2.7V
CM
= 25°C
T
A
0
–5
–10
–15
–20
TIME (4µs/DIV)
0
0.3
0.6
0.9
1.2
1.5
(V)
1.8
2.1
2.4
2.7
V
CM
Figure 61. AD8539 Large Signal Transient Response
Figure 58. AD8539 Input Offset Voltage vs. Input Common-Mode Voltage
Rev. B | Page 18 of 24
Data Sheet
AD8538/AD8539
1k
0
–20
AD8539
AD8539
= ±1.35V
V
= ±1.35V
SY
V
SY
–40
–60
100
–80
–100
–120
–140
–160
10
100
1k
10k
FREQUENCY (Hz)
100k
100
1k
10k
FREQUENCY (Hz)
100k
Figure 62. AD8539 Voltage Noise Density
Figure 63. AD8539 Channel Separation vs. Frequency
Rev. B | Page 19 of 24
AD8538/AD8539
Data Sheet
OUTLINE DIMENSIONS
2.90 BSC
5
1
4
3
2.80 BSC
1.60 BSC
2
0.95 BSC
1.90
BSC
*
0.90 MAX
0.70 MIN
*
1.00 MAX
0.20
0.08
8°
4°
0°
0.10 MAX
0.50
0.30
0.60
0.45
0.30
SEATING
PLANE
*
COMPLIANT TO JEDEC STANDARDS MO-193-AB WITH
THE EXCEPTION OF PACKAGE HEIGHT AND THICKNESS.
Figure 64. 5-Lead Thin Small Outline Transistor Package [TSOT-23]
(UJ-5)
Dimensions shown in millimeters
5.00 (0.1968)
4.80 (0.1890)
8
1
5
4
6.20 (0.2441)
5.80 (0.2284)
4.00 (0.1574)
3.80 (0.1497)
0.50 (0.0196)
0.25 (0.0099)
1.27 (0.0500)
BSC
45°
1.75 (0.0688)
1.35 (0.0532)
0.25 (0.0098)
0.10 (0.0040)
8°
0°
0.51 (0.0201)
0.31 (0.0122)
COPLANARITY
0.10
1.27 (0.0500)
0.40 (0.0157)
0.25 (0.0098)
0.17 (0.0067)
SEATING
PLANE
COMPLIANT TO JEDEC STANDARDS MS-012-AA
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 65. 8-Lead Standard Small Outline Package [SOIC_N]
Narrow Body
(R-8)
Dimensions shown in millimeters and (inches)
Rev. B | Page 20 of 24
Data Sheet
AD8538/AD8539
3.20
3.00
2.80
8
1
5
4
5.15
4.90
4.65
3.20
3.00
2.80
PIN 1
IDENTIFIER
0.65 BSC
0.95
0.85
0.75
15° MAX
1.10 MAX
0.80
0.55
0.40
0.15
0.05
0.23
0.09
6°
0°
0.40
0.25
COPLANARITY
0.10
COMPLIANT TO JEDEC STANDARDS MO-187-AA
Figure 66. 8-Lead Mini Small Outline Package [MSOP]
(RM-8)
Dimensions shown in millimeters
ORDERING GUIDE
Model1, 2
Temperature Range
Package Description
5-Lead TSOT-23
5-Lead TSOT-23
5-Lead TSOT-23
5-Lead TSOT-23
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead MSOP
Package Option
Branding
A0C
A0C
A0C
AOC
AD8538AUJZ-R2
AD8538AUJZ-REEL
AD8538AUJZ-REEL7
AD8538WAUJZ-R7
AD8538ARZ
AD8538ARZ-REEL
AD8538ARZ-REEL7
AD8539ARMZ
AD8539ARMZ-REEL
AD8539ARZ
AD8539ARZ-REEL
AD8539ARZ-REEL7
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
UJ-5
UJ-5
UJ-5
UJ-5
R-8
R-8
R-8
RM-8
RM-8
R-8
R-8
R-8
A1S
A1S
8-Lead MSOP
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
1 Z = RoHS Compliant Part.
2 W = Qualified for Automotive Applications.
AUTOMOTIVE PRODUCTS
The AD8538W model is available with controlled manufacturing to support the quality and reliability requirements of automotive
applications. Note that this automotive model may have specifications that differ from the commercial models; therefore, designers
should review the Specifications section of this data sheet carefully. Only the automotive grade products shown are available for use in
automotive applications. Contact your local Analog Devices account representative for specific product ordering information and to
obtain the specific Automotive Reliability reports for these models.
Rev. B | Page 21 of 24
AD8538/AD8539
NOTES
Data Sheet
Rev. B | Page 22 of 24
Data Sheet
NOTES
AD8538/AD8539
Rev. B | Page 23 of 24
AD8538/AD8539
NOTES
Data Sheet
©2005–2013 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D06741-0-2/13(B)
Rev. B | Page 24 of 24
相关型号:
©2020 ICPDF网 联系我们和版权申明