ADM1812-5AKSZ-REEL [ADI]
Microprocessor Supervisory in SOT-23 with Active High and Low Push-Pull Output, Positive Reset Output;型号: | ADM1812-5AKSZ-REEL |
厂家: | ADI |
描述: | Microprocessor Supervisory in SOT-23 with Active High and Low Push-Pull Output, Positive Reset Output 光电二极管 |
文件: | 总12页 (文件大小:238K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Microprocessor Reset Circuits
ADM1810 to ADM1813/ADM1815 to ADM1818
Data Sheet
FEATURES
FUNCTIONAL BLOCK DIAGRAMS
Reliable low cost voltage monitor with reset output
Suitable for monitoring 2.5 V, 3 V, 3.3 V, and 5 V power
supply voltages
ADM1810/ADM1815
V
CC
RST
Reset threshold levels: 4.62 V, 4.35 V, 3.06 V, 2.88 V, 2.55 V,
2.31 V, and 2.18 V typical
Active high and low push-pull output choices: ADM1810,
ADM1812, ADM1815, and ADM1817
V
CC
TOLERANCE
BIAS
150ms
DELAY
TC
GND
REFERENCE
Open-drain with internal pull-up resistor output choices:
ADM1811, ADM1813, ADM1816, and ADM1818
Can be used with a manual push-button to generate a reset:
ADM1813, ADM1818
Initialization of microprocessor systems with added safety
Available in 3-lead SOT-23 and SC70 packages
ADM1811/ADM1816
V
CC
5.5kΩ
RST
V
CC
TOLERANCE
BIAS
APPLICATIONS
150ms
DELAY
Microprocessor systems
Computers
TC
GND
REFERENCE
Controllers
Intelligent instruments
Automotive systems
ADM1812/ADM1817
V
CC
GENERAL DESCRIPTION
RST
The ADM181x range of voltage monitoring circuits is used in
any application where an electronic system needs to be reset
when a voltage increases above or below a predetermined value.
V
CC
TOLERANCE
BIAS
150ms
DELAY
Because of the reset delay time incorporated into the ADM181x
series, these devices provide a safe startup for electronic systems.
Before a system initializes, the power supply must stabilize.
Using the ADM181x series ensures that there are typically 150 ms
for the power supply to stabilize before the system resets and
safe system initialization begins.
TC
GND
REFERENCE
ADM1813/ADM1818
V
CC
5.5kΩ
RESET
MONITOR
RST
The ADM181x series of microprocessor reset circuits are
available in low cost, space-saving SOT-23 and SC70 packages.
V
CC
TOLERANCE
BIAS
150ms
DELAY
TC
GND
REFERENCE
Figure 1.
Rev. F
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©1999–2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
ADM1810 to ADM1813/ADM1815 to ADM1818
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Typical Performance Characteristics ..............................................6
Theory of Operation .........................................................................7
Timing Diagrams for All Devices ...............................................7
ADM1813 and ADM1818.............................................................7
ADM1810, ADM1812, ADM1815, and ADM1817 ....................7
ADM1811 and ADM1816.............................................................7
Outline Dimensions..........................................................................8
Ordering Guide .............................................................................9
Applications....................................................................................... 1
General Description......................................................................... 1
Functional Block Diagrams............................................................. 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
Absolute Maximum Ratings............................................................ 4
ESD Caution.................................................................................. 4
Pin Configurations and Function Descriptions ........................... 5
REVISION HISTORY
10/13—Rev. E to Rev. F
2/03—Rev. A to Rev. B.
Changed Open-Drain to Open-Drain with Internal Pull-Up
Resistor............................................................................ Throughout
Updated Outline Dimensions......................................................... 8
Changes to Ordering Guide ............................................................ 9
Edits to Features.................................................................................1
Deleted Table I ...................................................................................1
Edits to Specifications.......................................................................2
Edits to Absolute Maximum Ratings..............................................3
Edits to Ordering Guide ...................................................................3
Added Typical Performance Characteristics .................................4
Edits to ADM1813 AND ADM1818 section.................................5
Edits to ADM1810, ADM1812, ADM1815, and
8/08—Rev. D to Rev. E
Changes to Table 3............................................................................ 5
Updated Outline Dimensions......................................................... 8
Changes to Ordering Guide ............................................................ 9
ADM1817 Section.............................................................................5
Edits to ADM1811 and ADM1816 Section ...................................5
Updated Outline Dimensions..........................................................6
10/05—Rev. C to Rev. D
Updated Format..................................................................Universal
Added Figure 3.................................................................................. 5
Changes to Table 3............................................................................ 5
Updated Outline Dimensions......................................................... 8
Edits to Ordering Guide .................................................................. 9
3/02—Rev. 0 to Rev. A.
Addition of Table ..............................................................................1
Edits to Ordering Guide ...................................................................3
Addition of New Text to ADM1813 and ADM1818 Section ......4
9/03—Rev. B to Rev. C.
4/99—Revision 0: Initial Version
Added SC70.........................................................................Universal
Edits to Specifications ...................................................................... 2
Edits to Ordering Guide .................................................................. 4
Updated Outline Dimensions......................................................... 7
Rev. F | Page 2 of 12
Data Sheet
ADM1810 to ADM1813/ADM1815 to ADM1818
SPECIFICATIONS
VCC = full operating range, TA = −40°C to +105°C, unless otherwise noted.
Table 1.
Parameter
Min
Typ
Max Unit
Comments
SUPPLY
Voltage
1
1.2
5.5
5.5
16
V
V
µA
µA
TA = 0°C to 105°C
TA = −40°C to +105°C
VCC = 5.5 V, VCC > VTH, no load
VCC = 3.6 V, VCC > VTH, no load
Current
9
4
10
OUTPUT CURRENT
RST
350
350
µA
µA
mA
VCC ≥ VTH (max), reset not asserted (ADM1810/ADM1815)
VCC ≤ VTH (min), reset asserted (ADM1812/ADM1817)
VCC ≥ 2.7 V, reset asserted, VOUT = 0.4 V (ADM1810/ADM1811/
ADM1813/ADM1815/ADM1816/ADM1818)
VCC ≥ 2.7 V, reset not asserted, VOUT = 0.4 V (ADM1812/ADM1817)
ADM1810/ADM1812/ADM1815/ADM1817 at 0 µA to 500 µA
Output Source Current
RST Output Source Current
RST
8
8
Output Sink Current
RST Output Sink Current
OUTPUT VOLTAGE
mA
V
VCC − 0.5 VCC − 0.1
VCC TRIP POINT
ADM1810-5, ADM1811-5,
ADM1812-5, ADM1813-5
ADM1810-10, ADM1811-10,
ADM1812-10, ADM1813-10
ADM1815-5, ADM1816-5,
ADM1817-5, ADM1818-5
ADM1815-10, ADM1816-10,
ADM1817-10, ADM1818-10
ADM1815-20, ADM1816-20,
ADM1817-20, ADM1818-20
ADM1815-R23, ADM1816-R23,
ADM1817-R23, ADM1818-R23
ADM1815-R22, ADM1816-R22,
ADM1817-R22, ADM1818-R22
4.50
4.25
2.98
2.80
2.47
2.25
2.12
4.62
4.35
3.06
2.88
2.55
2.31
2.18
4.75
4.49
3.15
2.97
2.64
2.37
2.25
V
V
V
V
V
V
V
INTERNAL PULL-UP RESISTOR
ADM1811/ADM1816
ADM1813/ADM1818
OUTPUT CAPACITANCE
RESET ACTIVE TIME
VCC DETECT TO RESET
Falling
3.5
3.1
5.5
5.5
7.5
7.5
10
kΩ
kΩ
pF
ms
100
150
250
10
150
µs
ms
µs
Rising
100
1
250
250
tR = 5 µs
RST
ADM1813/ADM1818
ADM1813/ADM1818
PUSH-BUTTON DETECT TO
PUSH-BUTTON RESET
100
150
ms
Rev. F | Page 3 of 12
ADM1810 to ADM1813/ADM1815 to ADM1818
Data Sheet
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Table 2.
Parameter
Rating
VCC
−0.3 V to +6.0 V
20 mA
Input Current
Operating Temperature Range
Storage Temperature Range
θJA Thermal Impedance, SOT-23
θJA Thermal Impedance, SC70
Lead Temperature (Soldering, 10 sec)
Vapor Phase (60 sec)
Infrared (15 sec)
−40°C to +105°C
−65°C to +150°C
270°C/W
146°C/W
300°C
ESD CAUTION
215°C
220°C
Rev. F | Page 4 of 12
Data Sheet
ADM1810 to ADM1813/ADM1815 to ADM1818
PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS
V
RST/RST
1
1
CC
ADM181x
ADM181x
3
GND
3 GND
TOP VIEW
TOP VIEW
(Not to Scale)
(Not to Scale)
V
2
2
RST/RST
CC
Figure 2. 3-Lead SOT-23 Pin Configuration
Figure 3. 3-Lead SC70 Pin Configuration
Table 3. Pin Function Descriptions
Pin No.
SOT-23 SC70 Mnemonic
Description
1
2
RST
Active High Reset Output. RST remains high while VCC is below the reset threshold and remains high for
150 ms typical after VCC rises above the reset threshold. Applies to the ADM1812 and ADM1817 only.
RST
Active Low Reset Output. RST remains low while VCC is below the reset threshold and remains low for
150 ms typical after VCC rises above the reset threshold. Applies to the ADM1810, ADM1811, ADM1813,
ADM1815, ADM1816, and ADM1818 only.
2
3
1
3
VCC
GND
Supply Voltage. The supply voltage being monitored.
Ground. 0 V ground reference for all signals.
Rev. F | Page 5 of 12
ADM1810 to ADM1813/ADM1815 to ADM1818
Data Sheet
TYPICAL PERFORMANCE CHARACTERISTICS
10
1.011
1.009
1.007
1.005
1.003
1.001
0.999
0.997
0.995
I
@V = 5.5V
CC
CC
8
6
4
2
0
DEVIATION (RISE)
I
@V = 3V
CC
CC
DEVIATION (FALL)
–40 –20
0
20
30
50
70
85
100 120
–40 –20
0
20
30
50
70
85
100 120
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure 4. Supply Current vs. Temperature
Figure 7. Normalized Reset Threshold vs. Temperature
900
800
700
600
500
400
300
200
100
0
60
50
40
30
20
10
0
VOD = 20mV
VOD = 125mV
VOD = 200mV
–40 –20
0
20
30
50
70
85
100 120
10
30
40
60
80 100 200 400 600 800 1000
– V (mV)
TEMPERATURE (°C)
V
TH
CC
Figure 5. Power-Down Reset Delay vs. Temperature
Figure 8. Maximum Transient Duration Without Causing a Reset Pulse vs.
Reset Comparator Overdrive
380
370
360
350
340
330
320
310
300
290
–40 –20
0
20
30
50
70
85
100 120
TEMPERATURE (°C)
Figure 6. Power-Up Reset Timeout vs. Temperature
Rev. F | Page 6 of 12
Data Sheet
ADM1810 to ADM1813/ADM1815 to ADM1818
THEORY OF OPERATION
PUSH-BUTTON TIME
RESET TIMEOUT
TIMING DIAGRAMS FOR ALL DEVICES
The following two timing diagrams are valid for ADM1810,
ADM1811, ADM1812, ADM1813, ADM1815, ADM1816,
ADM1817, and ADM1818.
VOLTAGE
INPUT HIGH
VOLTAGE
INPUT LOW
V
CC
Figure 12. Push-Button Reset Timing Diagram
V
TRIP POINT (MAX)
CC
V
TRIP POINT
CC
V
TRIP POINT (MIN)
The ADM1818 range has 2.88 V and 2.55 V (typical) trip point
options that allow the user to monitor 3.3 V and 3 V supplies.
For 5 V monitoring requirements, the ADM1813 range has 4.62 V
and 4.35 V (typical) trip point options.
CC
V
TO RESET
DELAY
CC
RST
V
OL
ADM1810, ADM1812, ADM1815, AND ADM1817
The ADM1812 is a 5 V supply monitor with an active high
push-pull output and trip point options of 4.62 V and 4.35 V
typical. The ADM1810 is similar to the ADM1812, except that
the ADM1810 has an active low push-pull output stage. The
ADM1817 is suitable for monitoring 3.3 V, 3 V, and 2.5 V
supplies, with an active high push-pull output and trip point
options of 3.06 V, 2.88 V, 2.55 V, 2.31 V, and 2.18 V typical.
The ADM1815 is similar to the ADM1817, except that the
ADM1815 has an active low push-pull output stage.
Figure 9. Power-Down Timing Diagram
V
TRIP POINT (MAX)
CC
TRIP POINT
V
CC
V
TRIP POINT (MIN)
CC
V
CC
RESET ACTIVE TIMEOUT
The ADM1810/ADM1812/ADM1815/ADM1817 can connect
directly to most microprocessor reset inputs without the need
for external components.
RST
V
CC
Figure 10. Power-Up Timing Diagram
MICRO-
ADM1810/
ADM1812/
ADM1815/
ADM1817
ADM1813 AND ADM1818
PROCESSOR
The ADM1813 and ADM1818 are low cost voltage monitoring
devices featuring an open-drain with internal pull-up resistor
output and optional push-button reset function.
V
CC
RST/RST
GND
RESET
V
CC
MICRO-
PROCESSOR
ADM1813/
ADM1818
Figure 13. ADM1810/ADM1812/ADM1815/ADM1817 Typical Application
V
CC
RST
RESET
ADM1811 AND ADM1816
GND
The ADM1811 is a 5 V supply monitor with an active low open-
drain with internal pull-up resistor output and trip point options of
4.62 V and 4.35 V typical. The ADM1816 also has an active low
open-drain with internal pull-up resistor output but is suitable
for monitoring lower voltage supplies of 3.3 V, 3 V, a n d 2 . 5 V.
Figure 11. ADM1813/ADM1818 Typical Application
V
CC
An optional push-button reset switch can be connected
RST
between
output low. If the push-button reset button pulls the
low for a period greater than 1 µs when the reset button releases
RST RST
and ground. Pressing this switch pulls the reset
MICRO-
ADM1811/
ADM1816
PROCESSOR
RST
output
V
CC
the
line to float high, then the
150 ms typical.
line stays low for another
RST
RESET
GND
Figure 14. ADM1811/ADM1816 Typical Application
Rev. F | Page 7 of 12
ADM1810 to ADM1813/ADM1815 to ADM1818
OUTLINE DIMENSIONS
Data Sheet
3.04
2.90
2.80
1.40
1.30
3
1.20
2.64
2.10
1
2
0.60
0.45
1.03
0.89
2.05
1.78
1.02
0.54
REF
0.95
0.88
GAUGE
PLANE
1.12
0.89
0.100
0.013
0.180
0.085
0.51
0.37
SEATING
PLANE
0.25
0.60 MAX
0.30 MIN
COMPLIANT TO JEDEC STANDARDS TO-236-AB
Figure 15. 3-Lead Small Outline Transistor Package [SOT-23]
(RT-3)
Dimensions shown in millimeters
2.20
2.00
1.80
1.35
1.25
1.15
2.40
3
2.10
1.80
1
2
0.65 BSC
0.40
0.10
1.00
0.80
1.10
0.80
0.30
0.20
0.10
0.26
0.10
0.40
0.25
SEATING
PLANE
0.10 MAX
COPLANARITY
0.10
ALL DIMENSIONS COMPLIANT WITH EIAJ SC70
Figure 16. 3-Lead Thin Shrink Small Outline Transistor Package [SC70]
(KS-3)
Dimensions shown in millimeters
Rev. F | Page 8 of 12
Data Sheet
ADM1810 to ADM1813/ADM1815 to ADM1818
ORDERING GUIDE
Model1, 2
Temperature Range
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
Trip Point
4.62 V
4.62 V
4.62 V
4.62 V
4.62 V
4.35 V
4.35 V
4.35 V
4.35 V
4.35 V
4.62 V
4.62 V
4.62 V
4.62 V
4.62 V
4.62 V
4.62 V
4.35 V
4.35 V
4.35 V
4.35 V
4.35 V
4.35 V
4.62 V
4.62 V
4.62 V
4.62 V
4.62 V
4.62 V
4.35 V
4.35 V
4.35 V
4.35 V
4.35 V
4.35 V
4.62 V
4.62 V
4.62 V
4.62 V
4.62 V
4.62 V
4.62 V
4.35 V
4.35 V
4.35 V
4.35 V
4.35 V
4.35 V
4.35 V
4.35 V
Package Option
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
Branding
M4Y
M4Y
MZV
M4Y
M4Y
MZT
M4Z
M4Z
M4Z
M4Z
M1V
M6Z
M6Z
M1V
M1V
M6Z
M6Z
M1T
M70
M70
M1T
M70
M70
MTV
M72
M72
MTV
M72
M72
MTT
M71
M71
MTT
M71
M71
M3V
M3V
M6X
M6X
M3V
M6X
M6X
M3T
M3T
M6Y
M6Y
M3T
M3T
M6Y
M6Y
ADM1810-5AKSZ-REEL
ADM1810-5AKSZ-RL7
ADM1810-5ART-REEL7
ADM1810-5ARTZ-REEL
ADM1810-5ARTZ-RL7
ADM1810-10AKS-RL7
ADM1810-10AKSZ-RL
ADM1810-10AKSZ-RL7
ADM1810-10ARTZ-RL
ADM1810-10ARTZ-RL7
ADM1811-5AKS-RL7
ADM1811-5AKSZ-REEL
ADM1811-5AKSZ-RL7
ADM1811-5ART-REEL
ADM1811-5ART-REEL7
ADM1811-5ARTZ-REEL
ADM1811-5ARTZ-RL7
ADM1811-10AKS-RL7
ADM1811-10AKSZ-RL
ADM1811-10AKSZ-RL7
ADM1811-10ART-REEL
ADM1811-10ARTZ-RL
ADM1811-10ARTZ-RL7
ADM1812-5AKS-RL7
ADM1812-5AKSZ-REEL
ADM1812-5AKSZ-RL7
ADM1812-5ART-REEL7
ADM1812-5ARTZ-REEL
ADM1812-5ARTZ-RL7
ADM1812-10AKS-RL7
ADM1812-10AKSZ-RL
ADM1812-10AKSZ-RL7
ADM1812-10ART-RL7
ADM1812-10ARTZ-RL
ADM1812-10ARTZ-RL7
ADM1813-5AKS-REEL
ADM1813-5AKS-RL7
ADM1813-5AKSZ-REEL
ADM1813-5AKSZ-RL7
ADM1813-5ART-RL7
ADM1813-5ARTZ-RL
ADM1813-5ARTZ-RL7
ADM1813-10AKS-REEL
ADM1813-10AKS-RL7
ADM1813-10AKSZ-RL
ADM1813-10AKSZ-RL7
ADM1813-10ART-REEL
ADM1813-10ART-RL7
ADM1813-10ARTZ-RL
ADM1813-10ARTZ-RL7
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
Rev. F | Page 9 of 12
ADM1810 to ADM1813/ADM1815 to ADM1818
Data Sheet
Model1, 2
Temperature Range
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
Trip Point
3.06 V
3.06 V
3.06 V
3.06 V
3.06 V
3.06 V
2.88 V
2.88 V
2.88 V
2.88 V
2.88 V
2.88 V
2.88 V
2.55 V
2.55 V
2.55 V
2.55 V
2.18 V
2.18 V
2.18 V
2.18 V
2.18 V
2.31 V
2.31 V
2.31 V
2.31 V
2.31 V
3.06 V
3.06 V
3.06 V
3.06 V
3.06 V
3.06 V
2.88 V
2.88 V
2.88 V
2.88 V
2.88 V
2.88 V
2.55 V
2.55 V
2.55 V
2.55 V
2.55 V
2.55 V
Package Option
KS-3 (SC70)
KS-3 (SC70)
Branding
M5K
M73
M73
M5K
M73
M73
M5E
M4F
M4F
M5E
M5E
M4F
M4F
M76
M76
M5A
M76
M74
M74
M5B
M74
M74
M75
M75
M5C
M75
M75
M6K
M77
M77
M6K
M77
M77
M54
M54
M6E
M6E
M54
M54
M6A
M6H
M6H
M6A
M6H
M6H
ADM1815-5AKS-RL7
ADM1815-5AKSZ-REEL
ADM1815-5AKSZ-RL7
ADM1815-5ART-REEL7
ADM1815-5ARTZ-REEL
ADM1815-5ARTZ-RL7
ADM1815-10AKS-RL7
ADM1815-10AKSZ-RL
ADM1815-10AKSZ-RL7
ADM1815-10ART-REEL
ADM1815-10ART-RL7
ADM1815-10ARTZ-RL
ADM1815-10ARTZ-RL7
ADM1815-20AKSZ-RL
ADM1815-20AKSZ-RL7
ADM1815-20ART-RL7
ADM1815-20ARTZ-RL7
ADM1815-R22AKSZ-RL
ADM1815-R22AKSZ-R7
ADM1815-R22ART-RL7
ADM1815-R22ARTZ-RL
ADM1815-R22ARTZ-R7
ADM1815-R23AKSZ-RL
ADM1815-R23AKSZ-R7
ADM1815-R23ART-RL7
ADM1815-R23ARTZ-RL
ADM1815-R23ARTZ-R7
ADM1816-5AKS-REEL7
ADM1816-5AKSZ-REEL
ADM1816-5AKSZ-RL7
ADM1816-5ART-REEL7
ADM1816-5ARTZ-REEL
ADM1816-5ARTZ-RL7
ADM1816-10AKSZ-RL
ADM1816-10AKSZ-RL7
ADM1816-10ART-REEL
ADM1816-10ART-RL7
ADM1816-10ARTZ-RL
ADM1816-10ARTZ-RL7
ADM1816-20AKS-RL7
ADM1816-20AKSZ-RL
ADM1816-20AKSZ-RL7
ADM1816-20ART-RL7
ADM1816-20ARTZ-RL
ADM1816-20ARTZ-RL7
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
Rev. F | Page 10 of 12
Data Sheet
ADM1810 to ADM1813/ADM1815 to ADM1818
Model1, 2
Temperature Range
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
Trip Point
2.18 V
2.18 V
2.18 V
2.18 V
2.18 V
2.18 V
2.31 V
2.31 V
2.31 V
2.31 V
2.31 V
3.06 V
3.06 V
3.06 V
3.06 V
3.06 V
2.88 V
2.88 V
2.88 V
2.88 V
2.88 V
2.88 V
2.88 V
2.55 V
2.55 V
2.55 V
2.55 V
2.55 V
2.18 V
2.18 V
2.18 V
2.18 V
2.18 V
2.31 V
2.31 V
2.31 V
2.31 V
2.31 V
3.06 V
3.06 V
3.06 V
3.06 V
3.06 V
2.88 V
2.88 V
2.88 V
2.88 V
2.88 V
2.88 V
Package Option
KS-3 (SC70)
KS-3 (SC70)
Branding
M6B
M78
M78
M6B
M78
M78
M79
M79
M6C
M79
M79
M7F
M7F
M7K
M7F
M7F
M7E
M7G
M7G
M7E
M7E
M7G
M7G
M7H
M7H
M7A
M7H
M7H
M7J
ADM1816-R22AKS-RL7
ADM1816-R22AKSZ-RL
ADM1816-R22AKSZ-R7
ADM1816-R22ART-RL7
ADM1816-R22ARTZ-RL
ADM1816-R22ARTZ-R7
ADM1816-R23AKSZ-RL
ADM1816-R23AKSZ-R7
ADM1816-R23ART-RL7
ADM1816-R23ARTZ-RL
ADM1816-R23ARTZ-R7
ADM1817-5AKSZ-REEL
ADM1817-5AKSZ-RL7
ADM1817-5ART-REEL7
ADM1817-5ARTZ-REEL
ADM1817-5ARTZ-RL7
ADM1817-10AKS-RL7
ADM1817-10AKSZ-RL
ADM1817-10AKSZ-RL7
ADM1817-10ART-REEL
ADM1817-10ART-RL7
ADM1817-10ARTZ-RL
ADM1817-10ARTZ-RL7
ADM1817-20AKSZ-RL
ADM1817-20AKSZ-RL7
ADM1817-20ART-RL7
ADM1817-20ARTZ-RL
ADM1817-20ARTZ-RL7
ADM1817-R22AKSZ-RL
ADM1817-R22AKSZ-R7
ADM1817-R22ART-RL7
ADM1817-R22ARTZ-RL
ADM1817-R22ARTZ-R7
ADM1817-R23AKSZ-RL
ADM1817-R23AKSZ-R7
ADM1817-R23ART-RL7
ADM1817-R23ARTZ-RL
ADM1817-R23ARTZ-R7
ADM1818-5AKS-REEL
ADM1818-5AKSZ-RL7
ADM1818-5ART-REEL7
ADM1818-5ARTZ-REEL
ADM1818-5ARTZ-RL7
ADM1818-10AKS-RL7
ADM1818-10AKSZ-RL
ADM1818-10AKSZ-RL7
ADM1818-10ART-REEL
ADM1818-10ART-RL7
ADM1818-10ARTZ-RL7
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
M7J
M7B
M7J
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
M7J
M7L
M7L
M7C
M7L
M7L
M8K
M4T
M8K
M4T
M4T
M8E
M7P
M7P
M8E
M8E
M7P
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
Rev. F | Page 11 of 12
ADM1810 to ADM1813/ADM1815 to ADM1818
Data Sheet
Model1, 2
Temperature Range
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
Trip Point
2.55 V
2.55 V
2.55 V
2.55 V
2.55 V
2.18 V
2.18 V
2.18 V
2.18 V
2.18 V
2.18 V
2.31 V
2.31 V
2.31 V
2.31 V
2.31 V
Package Option
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
Branding
M59
M59
M8A
M8A
M59
M8B
M8B
M7M
M7M
M8B
ADM1818-20AKSZ-RL
ADM1818-20AKSZ-RL7
ADM1818-20ART-REEL
ADM1818-20ART-RL7
ADM1818-20ARTZ-RL7
ADM1818-R22AKS-RL
ADM1818-R22AKS-RL7
ADM1818-R22AKSZ-RL
ADM1818-R22AKSZ-R7
ADM1818-R22ART-RL
ADM1818-R22ART-RL7
ADM1818-R23AKS-RL7
ADM1818-R23AKSZ-RL
ADM1818-R23AKSZ-R7
ADM1818-R23ART-RL
ADM1818-R23ART-RL7
M8B
M8C
M7N
M7N
M8C
M8C
RT-3 (SOT-23)
RT-3 (SOT-23)
1 Available only in reels.
2 Z = RoHS Compliant Part.
©1999–2013 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D00064-0-10/13(F)
Rev. F | Page 12 of 12
相关型号:
ADM1812-5AKSZ-RL7
Microprocessor Supervisory in SOT-23 with Active High and Low Push-Pull Output, Positive Reset Output
ADI
ADM1812-5ARTZ-REEL
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3, ROHS COMPLIANT, TO-236AB, SOT-23, 3 PIN
ADI
ADM1812-5ARTZ-REEL7
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3, ROHS COMPLIANT, TO-236AB, SOT-23, 3 PIN
ADI
©2020 ICPDF网 联系我们和版权申明