ADP8870 [ADI]
Charge-Pump, Parallel Backlight Driver with Image Content PWM Input; 电荷泵，具有图像内容PWM输入并联背光驱动器
| 型号： | ADP8870 |
| 厂家： | 
ADI |
| 描述： | Charge-Pump, Parallel Backlight Driver with Image Content PWM Input |
| 文件： | 总2页 (文件大小：68K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Charge-Pump, Parallel Backlight Driver
with Image Content PWM Input
ADP8870
FEATURES
APPLICATIONS
Charge pump with automatic gain selection of 1×, 1.5×, and
2× for maximum efficiency
Two high accuracy ( 5ꢀ% phototransistor inputs for
automated ambient light sensing (ALS%
Mobile display backlighting
Mobile phone keypad backlighting
RGB LED lighting
LED indication
5 programmable ambient light-sensing zones for optimal
backlight power savings
Independent ALS control of D7, for automated response of
keypad lighting to ambient light levels
PWM input can be used for content adaptive brightness
control (CABC% of any, or all, of the LEDs
General backlighting of small format displays
TYPICAL OPERATING CIRCUIT
V
DD_ALS
OPTIONAL
PHOTOSENSOR
V
OUT
PHOTO-
SENSOR
PWM input scales the LED output current
7 independent, programmable LED drivers
6 drivers capable of 30 mA (maximum%
0.1µF
0.1µF
D1
D2
D3
D4
D5
D6
D7 CMP_IN
1 driver capable of 60 mA (maximum%
Programmable maximum current limit (128 levels%
Standby mode for <1 μA current consumption
16 programmable fade-in and fade-out times (0.1 sec to 5.5 sec%
with choice of square or cubic rates
V
IN
1µF
V
OUT
1µF
VDDIO
Fading override
C1+
I2C-compatible interface for all programming
Dedicated reset pin and built-in power-on reset (POR%
Short-circuit, overvoltage, and overtemperature protection
Internal soft start to limit inrush currents
Input-to-output isolation during faults or shutdown
Operates down to VIN = 2.5 V, with undervoltage lockout
(UVLO% at 2.0 V.
C1
nRST
SDA
ADP8870
1µF
C1–
C2+
C2–
GND
SCL
C2
1µF
nINT
PWM
Available in a small, 2.15 mm × 2.36 mm × 0.6 mm wafer level
chip scale package (WLCSP% or a 4 mm × 4 mm × 0.75 mm
lead frame chip scale package (LFCSP%
Figure 1.
GENERAL DESCRIPTION
The ADP8870 combines a programmable backlight LED
charge-pump driver with automatic phototransistor control of
the brightness (LED current) and a PWM input to control the
scale of the output current. This combination allows significant
power savings because it automatically changes the current
intensity based on the sensed ambient lighting levels and the
display image content. It performs this function automatically,
eliminating the need for a processor to monitor the photo-
transistor. The light intensity thresholds are fully programmable
via the I2C interface.
60 mA (maximum). All LEDs are individually programmable for
minimum/maximum current and fade-in/fade-out times through
an I2C interface. These LEDs can also be combined into groups
to reduce the processor instructions during fade-in and fade-out.
Driving these components is a two-capacitor charge pump
with gains of 1×, 1.5×, and 2×. This setup is capable of driving a
maximum IOUT of 240 mA from a supply of 2.5 V to 5.5 V. A full
suite of safety features, including short-circuit, overvoltage, and
overtemperature protection, allows easy implementation of a
safe and robust design. Additionally, input inrush currents are
limited via an integrated soft start combined with controlled
input-to-output isolation.
The ADP8870 allows up to six LEDs to be independently driven up
to 30 mA (maximum). An additional seventh LED can be driven to
For more information about the ADP8870, including the complete data sheet, contact your local Analog Devices, Inc., sales office at
www.analog.com/sales.
Rev. Sp0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
rights of third parties that may result from its use. Specifications subject to change without notice. No
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2010 Analog Devices, Inc. All rights reserved.
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
ADP8870
OUTLINE DIMENSIONS
2.190
2.150
2.110
4
3
2
1
A
B
C
D
E
BALL 1
IDENTIFIER
2.395
2.355
2.315
1.60 REF
0.40
REF
BOTTOM VIEW
(BALL SIDE UP)
TOP VIEW
(BALL SIDE DOWN)
0.415
0.400
0.385
1.20 REF
0.645
0.600
0.555
SIDE VIEW
COPLANARITY
0.05
SEATING
PLANE
0.287
0.267
0.247
0.230
0.200
0.170
Figure 2. 20-Ball Wafer Level Chip Scale Package [WLCSP]
(CB-20-7)
Dimensions shown in millimeters
4.10
4.00 SQ
3.90
0.30
0.25
0.20
PIN 1
INDICATOR
PIN 1
INDICATOR
16
15
20
0.50
BSC
1
EXPOSED
PAD
2.65
2.50 SQ
2.35
5
11
6
10
0.50
0.40
0.30
0.25 MIN
TOP VIEW
BOTTOM VIEW
FOR PROPER CONNECTION OF
THE EXPOSED PAD, REFER TO
THE PIN CONFIGURATION AND
FUNCTION DESCRIPTIONS
0.80
0.75
0.70
0.05 MAX
0.02 NOM
COPLANARITY
0.08
SECTION OF THIS DATA SHEET.
SEATING
PLANE
0.20 REF
COMPLIANT TO JEDEC STANDARDS MO-220-WGGD.
Figure 3. 20-Lead Lead Frame Chip Scale Package [LFCSP_WQ]
4 mm × 4 mm Body, Very Very Thin Quad
(CP-20-10)
Dimensions shown in millimeters
Figure 4. Tape and Reel Orientation for WLCSP Units
Figure 5. Tape and Reel Orientation for LFCSP Units
©2010 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D08829F-0-6/10(Sp0%
Rev. Sp0 | Page 2 of 2
相关型号：
©2020 ICPDF网 联系我们和版权申明