ADR02CRZ [ADI]
Ultracompact, Precision 10.0 V/5.0 V/2.5 V/3.0 V Voltage References; 超小型,精密10.0 V / 5.0 V / 2.5 V / 3.0 V电压参考型号: | ADR02CRZ |
厂家: | ADI |
描述: | Ultracompact, Precision 10.0 V/5.0 V/2.5 V/3.0 V Voltage References |
文件: | 总20页 (文件大小:511K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Ultracompact, Precision
10.0 V/5.0 V/2.5 V/3.0 V Voltage References
ADR01/ADR02/ADR03/ADR06
Data Sheet
FEATURES
PIN CONFIGURATIONS
Ultracompact SC70 and TSOT packages
Low temperature coefficient
8-lead SOIC: 3 ppm/°C
ADR01/
TEMP
GND
1
2
3
5
TRIM
ADR02/
ADR03/
ADR06
V
V
TOP VIEW
(Not to Scale)
4
IN
OUT
5-lead SC70: 9 ppm/°C
5-lead TSOT: 9 ppm/°C
Initial accuracy 0.1%
Figure 1. 5-Lead, SC70/TSOT Surface-Mount Packages
No external capacitor required
Low noise 10 µV p-p (0.1 Hz to 10.0 Hz)
Wide operating range
ADR01: 12.0 V to 36.0 V
ADR02: 7.0 V to 36.0 V
1
2
3
4
8
7
6
5
NIC
NIC
V
NIC
ADR01/
ADR02/
ADR03/
ADR06
V
IN
TEMP
GND
OUT
TOP VIEW
(Not to Scale)
TRIM
ADR03: 4.5 V to 36.0 V
ADR06: 5.0 V to 36.0 V
NOTES
1. NIC = NO INTERNAL CONNECT.
High output current 10 mA
Wide temperature range: −40°C to +125°C
ADR01/ADR02/ADR03 pin compatible to industry-
standard REF01/REF02/REF03
ADR01, ADR02, ADR03 and ADR06 SOIC qualified for
automotive applications
Figure 2. 8-Lead, SOIC Surface-Mount Package
APPLICATIONS
Precision data acquisition systems
High resolution converters
Industrial process control systems
Precision instruments
Auto battery monitoring
PCMCIA cards
The ADR01, ADR02, ADR03, and ADR06 are compact, low
drift voltage references that provide an extremely stable output
voltage from a wide supply voltage range. They are available in
5-lead SC70 and TSOT packages, and 8-lead SOIC packages
with A, B, and C grade selections. All parts are specified over
the extended industrial (–40°C to +125°C) temperature range.
The ADR01, ADR02, ADR03, and ADR06 A grade in 8-lead
SOIC are qualified for automotive applications.
GENERAL DESCRIPTION
The ADR01, ADR02, ADR03, and ADR06 are precision 10.0 V,
5.0 V, 2.5 V, and 3.0 V band gap voltage references featuring high
accuracy, high stability, and low power consumption. The parts
are housed in tiny, 5-lead SC70 and TSOT packages, as well as
in 8-lead SOIC versions. The SOIC versions of the ADR01,
ADR02, and ADR03 are drop-in replacements1 to the industry-
standard REF01, REF02, and REF03. The small footprint and
wide operating range make the ADR0x references ideally suited
for general-purpose and space-constrained applications.
Table 1. Selection Guide
Part Number
Output Voltage
10.0 V
ADR01
With an external buffer and a simple resistor network, the
TEMP terminal can be used for temperature sensing and
approximation. A TRIM terminal is provided on the devices for
fine adjustment of the output voltage.
ADR02
5.0 V
ADR03
2.5 V
ADR06
3.0 V
1 ADR01, ADR02, and ADR03 are component-level compatible with REF01, REF02, and REF03, respectively. No guarantees for system-level compatibility are implied.
SOIC versions of ADR01/ADR02/ADR03 are pin-to-pin compatible with 8-lead SOIC versions of REF01/REF02/REF03, respectively, with the additional temperature
monitoring function.
Rev. R
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
Tel: 781.329.4700
www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
Fax: 781.461.3113 ©2002–2012 Analog Devices, Inc. All rights reserved.
ADR01/ADR02/ADR03/ADR06
Data Sheet
TABLE OF CONTENTS
Terminology.......................................................................................9
Typical Performance Characteristics ........................................... 10
Applications Information .............................................................. 15
Overview ..................................................................................... 15
Applying the ADR01/ADR02/ADR03/ADR06...................... 15
Low Cost Current Source.......................................................... 16
Precision Current Source with Adjustable Output................ 16
Programmable 4 mA to 20 mA Current Transmitter............ 17
Precision Boosted Output Regulator....................................... 17
Outline Dimensions....................................................................... 18
Ordering Guides......................................................................... 19
Automotive Products................................................................. 20
Features .............................................................................................. 1
Applications....................................................................................... 1
Pin Configurations ........................................................................... 1
General Description ......................................................................... 1
Revision History ............................................................................... 2
Specifications..................................................................................... 4
ADR01 Electrical Characteristics............................................... 4
ADR02 Electrical Characteristics............................................... 5
ADR03 Electrical Characteristics............................................... 6
ADR06 Electrical Characteristics............................................... 7
Absolute Maximum Ratings............................................................ 8
Thermal Resistance ...................................................................... 8
ESD Caution.................................................................................. 8
REVISION HISTORY
4/10—Rev. L to Rev. M
1/12—Rev. Q to Rev. R
Changes to Features Section and General Description Section..1
Changes to Figure 41...................................................................... 17
Changes to Ordering Guides Section .......................................... 19
Changes to Table 2............................................................................ 4
Changes to ADR01 Ordering Guide.......................................... 190
11/11—Rev. P to Rev. Q
12/08—Rev. K to Rev. L
Changes to General Description Section ...................................... 1
Changes to Table 2............................................................................ 4
Changes to Table 3............................................................................ 5
Changes to Table 4............................................................................ 6
Changes to Table 5............................................................................ 7
Changes to Maximum Input Voltage...............................Universal
Removed Die Version ........................................................Universal
Changes to Table 2.............................................................................3
Changes to Table 3.............................................................................4
Changes to Table 4.............................................................................5
Changes to Table 5.............................................................................6
Deleted Table 6 and Figure 3............................................................7
Changes to Terminology Section ....................................................8
Added Input and Output Capacitors Section ............................. 15
10/11 Rev. O to Rev. P
Changes to Features Section, Applications Section, and General
Description Section.......................................................................... 1
Changes to ADR01 Electrical Characteristics Section
and Table 2......................................................................................... 4
Changes to ADR02 Electrical Characteristics Section
2/08—Rev. J to Rev. K
Changes to Terminology Section ....................................................9
Changes to Ordering Guide.......................................................... 19
and Table 3......................................................................................... 5
Changes to ADR03 Electrical Characteristics Section
and Table 4......................................................................................... 6
Changes to ADR06 Electrical Characteristics Section
and Table 5......................................................................................... 7
Changes to Ordering Guides......................................................... 19
Changes to Automotive Products Section................................... 20
3/07—Rev. I to Rev. J
Renamed Parameters and Definitions Section..............................9
Changes to Temperature Monitoring Section ............................ 15
Changes to Ordering Guide.......................................................... 19
7/05—Rev. H to Rev. I
10/10—Rev. N to Rev. O
Changes to Table 5.............................................................................7
Updated Outline Dimensions....................................................... 19
Changes to Ordering Guide.......................................................... 19
Deleted Negative Reference Section and Figure 38.................... 16
Changes to ADR02 Ordering Guide............................................ 19
7/10—Rev. M to Rev. N
12/04—Rev. G to Rev. H
Changes to Figure 2.......................................................................... 1
Changes to ADR01 Ordering Guide............................................ 19
Added Automotive Products Section........................................... 20
Changes to ADR06 Ordering Guide............................................ 20
Rev. R | Page 2 of 20
Data Sheet
ADR01/ADR02/ADR03/ADR06
9/04—Rev. F to Rev. G
2/03—Rev. A to Rev. B
Changes to Table 2 ............................................................................4
Changes to Table 3 ............................................................................5
Changes to Table 4 ............................................................................6
Changes to Table 5 ............................................................................7
Changes to Ordering Guide...........................................................19
Added ADR03 .................................................................... Universal
Added TSOT-5 (UJ) Package............................................ Universal
Updated Outline Dimensions........................................................18
12/02—Rev. 0 to Rev. A
Changes to Features Section............................................................1
Changes to General Description.....................................................1
Table I Deleted...................................................................................1
Changes to ADR01 Specifications ..................................................2
Changes to ADR02 Specifications ..................................................3
Changes to Absolute Maximum Ratings Section .........................4
Changes to Ordering Guide.............................................................4
Updated Outline Dimensions........................................................12
7/04—Rev. E to Rev. F
Changes to ADR02 Electrical Characteristics, Table 2 ................4
Changes to Ordering Guide...........................................................19
2/04—Rev. D to Rev. E
Added C grade....................................................................Universal
Changes to Outline Dimensions ...................................................19
Updated Ordering Guide ...............................................................20
8/03—Rev. C to Rev D
Added ADR06.....................................................................Universal
Change to Figure 27........................................................................13
6/03—Rev. B to Rev C
Changes to Features Section ............................................................1
Changes to General Description Section .......................................1
Changes to Figure 2...........................................................................1
Changes to Specifications Section...................................................2
Addition of Dice Electrical Characteristics and Layout...............6
Changes to Absolute Maximum Ratings Section..........................7
Updated SOIC (R-8) Outline Dimensions...................................19
Changes to Ordering Guide...........................................................20
Rev. R | Page 3 of 20
ADR01/ADR02/ADR03/ADR06
SPECIFICATIONS
Data Sheet
ADR01 ELECTRICAL CHARACTERISTICS
VIN = 12.0 V to 36.0 V, VIN = 12.0 V to 24.0 V for ADR01WARZ, TA = 25°C, unless otherwise noted.
Table 2.
Parameter
Symbol
VO
Conditions
Min
Typ
Max
Unit
V
OUTPUT VOLTAGE
INITIAL ACCURACY
A and C grades
A and C grades
9.990
10.000
10.010
10
VOERR
mV
0.1
10.005
5
0.05
10.014
14
%
OUTPUT VOLTAGE
INITIAL ACCURACY
VO
B grade
B grade
9.995
9.986
10.000
V
VOERR
mV
%
OUTPUT VOLTAGE
INITIAL ACCURACY
VO
ADR01WARZ
ADR01WARZ
10.000
V
VOERR
mV
0.14
10
25
25
3
9
9
40
%
A grade, 8-lead SOIC, −40°C < TA < +125°C
A grade, 5-lead TSOT, –40°C < TA < +125°C
A grade, 5-lead SC70, –40°C < TA < +125°C
B grade, 8-lead SOIC, –40°C < TA < +125°C
B grade, 5-lead TSOT, –40°C < TA < +125°C
B grade, 5-lead SC70, –40°C < TA < +125°C
C grade, 8-lead SOIC, –40°C < TA < +125°C
3
ppm/°C
ppm/°C
ppm/°C
ppm/°C
ppm/°C
ppm/°C
ppm/°C
V
1
10
DROPOUT VOLTAGE
LINE REGULATION
VDO
2
∆VO/∆VIN
VIN = 12.0 V to 36.0 V, VIN = 12.0 V to 26.0 V for
ADR01WARZ, –40°C < TA < +125°C
7
30
70
1
ppm/V
LOAD REGULATION
∆VO/∆ILOAD
ILOAD = 0 mA to 10 mA, –40°C < TA < +125°C,
40
ppm/mA
V
IN = 15.0 V
QUIESCENT CURRENT
IIN
No load, –40°C < TA < +125°C
0.1 Hz to 10.0 Hz
1 kHz
0.65
20
mA
VOLTAGE NOISE
eN p-p
eN
µV p-p
nV/√Hz
µs
VOLTAGE NOISE DENSITY
TURN-ON SETTLING TIME
LONG-TERM STABILITY1
OUTPUT VOLTAGE HYSTERESIS
RIPPLE REJECTION RATIO
SHORT CIRCUIT TO GND
TEMPERATURE SENSOR
Voltage Output at TEMP Pin
Temperature Sensitivity
510
4
tR
∆VO
∆VO_HYS
RRR
ISC
1000 hours
fIN = 10 kHz
50
ppm
ppm
dB
70
−75
30
mA
VTEMP
TCVTEMP
550
1.96
mV
mV/°C
1 The long-term stability specification is noncumulative. The drift in subsequent 1000 hour periods is significantly lower than in the first 1000 hour period.
Rev. R | Page 4 of 20
Data Sheet
ADR01/ADR02/ADR03/ADR06
ADR02 ELECTRICAL CHARACTERISTICS
VIN = 7.0 V to 36.0 V, VIN = 7.0 V to 26.0 V for ADR02WARZ, TA = 25°C, unless otherwise noted.
Table 3.
Parameter
Symbol
VO
Conditions
Min
Typ
Max
Unit
OUTPUT VOLTAGE
INITIAL ACCURACY
A and C grades
A and C grades
4.995 5.000 5.005
V
VOERR
5
mV
0.1
%
OUTPUT VOLTAGE
INITIAL ACCURACY
VO
B grade
B grade
4.997 5.000 5.003
V
VOERR
3
mV
0.06
%
TEMPERATURE COEFFICIENT
TCVO
A grade, 8-lead SOIC, –40°C < TA < +125°C
A grade, 5-lead TSOT, –40°C < TA < +125°C
A grade, 5-lead SC70, –40°C < TA < +125°C
A grade, 5-lead SC70, –55°C < TA < +125°C
B grade, 8-lead SOIC, –40°C < TA < +125°C
B grade, 5-lead TSOT, –40°C < TA < +125°C
B grade, 5-lead SC70, –40°C < TA < +125°C
C grade, 8-lead SOIC, –40°C < TA < +125°C
3
1
10
25
25
30
3
9
9
40
ppm/°C
ppm/°C
ppm/°C
ppm/°C
ppm/°C
ppm/°C
ppm/°C
ppm/°C
V
10
7
DROPOUT VOLTAGE
LINE REGULATION
VDO
2
∆VO/∆VIN
VIN = 7.0 V to 36.0 V, VIN = 7.0 V to 26.0 V for
ADR02WARZ, –40°C < TA < +125°C
30
ppm/V
VIN = 7.0 V to 36.0 V, –55°C < TA < +125°C
7
40
70
ppm/V
LOAD REGULATION
∆VO/∆ILOAD
ILOAD = 0 mA to 10 mA, –40°C < TA < +125°C,
40
ppm/mA
V
IN = 10.0 V
ILOAD = 0 mA to 10 mA, –55°C < TA < +125°C,
IN = 10.0 V
45
80
1
ppm/mA
V
QUIESCENT CURRENT
VOLTAGE NOISE
IIN
No load, –40°C < TA < +125°C
0.1 Hz to 10.0 Hz
1 kHz
0.65
10
mA
eN p-p
eN
µV p-p
nV/√Hz
µs
VOLTAGE NOISE DENSITY
TURN-ON SETTLING TIME
LONG-TERM STABILITY1
OUTPUT VOLTAGE HYSTERESIS
230
4
tR
∆VO
∆VO_HYS
1000 hours
50
ppm
ppm
ppm
dB
70
80
–55°C < TA < +125°C
fIN = 10 kHz
RIPPLE REJECTION RATIO
SHORT CIRCUIT TO GND
TEMPERATURE SENSOR
Voltage Output at TEMP Pin
Temperature Sensitivity
RRR
ISC
–75
30
mA
VTEMP
TCVTEMP
550
mV
1.96
mV/°C
1 The long-term stability specification is noncumulative. The drift in subsequent 1000 hour periods is significantly lower than in the first 1000 hour period.
Rev. R | Page 5 of 20
ADR01/ADR02/ADR03/ADR06
Data Sheet
ADR03 ELECTRICAL CHARACTERISTICS
VIN = 4.5 V to 36.0 V, VIN = 4.5 V to 26.0 V for ADR03WARZ, TA = 25°C, unless otherwise noted.
Table 4.
Parameter
Symbol
VO
Conditions
Min
Typ
Max
Unit
V
OUTPUT VOLTAGE
INITIAL ACCURACY
A and C grades
A and C grades
2.495
2.500
2.505
5
VOERR
mV
0.2
%
OUTPUT VOLTAGE
INITIAL ACCURACY
VO
B grades
B grades
2.4975 2.5000 2.5025
V
VOERR
2.5
0.1
mV
%
TEMPERATURE COEFFICIENT
TCVO
A grade, 8-lead SOIC, –40°C < TA < +125°C
A grade, 5-lead TSOT, –40°C < TA < +125°C
A grade, 5-lead SC70, –40°C < TA < +125°C
A grade, 5-lead SC70, –55°C < TA < +125°C
B grade, 8-lead SOIC, –40°C < TA < +125°C
B grade, 5-lead TSOT, –40°C < TA < +125°C
B grade, 5-lead SC70, –40°C < TA < +125°C
C grade, 8-lead SOIC, –40°C < TA < +125°C
3
1
10
25
25
30
3
9
9
40
ppm/°C
ppm/°C
ppm/°C
ppm/°C
ppm/°C
ppm/°C
ppm/°C
ppm/°C
10
7
DROPOUT VOLTAGE
LINE REGULATION
VDO
2
V
∆VO/∆VIN
VIN = 4.5 V to 36.0 V, VIN = 4.5 V to 26.0 V for
ADR03WARZ, –40°C < TA < +125°C
30
ppm/V
VIN = 4.5 V to 36.0 V, –55°C < TA < +125°C
7
40
70
ppm/V
LOAD REGULATION
∆ VO/∆ILOAD
ILOAD = 0 mA to 10 mA, –40°C < TA < +125°C,
VIN = 7.0 V
25
ppm/mA
ILOAD = 0 mA to 10 mA, –55°C < TA < +125°C,
VIN = 7.0 V
45
80
1
ppm/mA
QUIESCENT CURRENT
VOLTAGE NOISE
IIN
No load, –40°C < TA < +125°C
0.1 Hz to 10.0 Hz
1 kHz
0.65
6
mA
eN p-p
eN
µV p-p
nV/√Hz
µs
VOLTAGE NOISE DENSITY
TURN-ON SETTLING TIME
LONG-TERM STABILITY1
OUTPUT VOLTAGE HYSTERESIS
230
4
tR
∆VO
∆VO_HYS
1000 hours
50
70
80
–75
30
ppm
ppm
ppm
dB
–55°C < TA < +125°C
fIN = 10 kHz
RIPPLE REJECTION RATIO
RRR
ISC
SHORT CIRCUIT TO GND
TEMPERATURE SENSOR
Voltage Output at TEMP Pin
Temperature Sensitivity
mA
VTEMP
TCVTEMP
550
mV
1.96
mV/°C
1 The long-term stability specification is noncumulative. The drift in subsequent 1000 hour periods is significantly lower than in the first 1000 hour period.
Rev. R | Page 6 of 20
Data Sheet
ADR01/ADR02/ADR03/ADR06
ADR06 ELECTRICAL CHARACTERISTICS
VIN = 5.0 V to 36.0 V, VIN = 5.0 V to 26.0 V for ADR06WARZ, TA = 25°C, unless otherwise noted.
Table 5.
Parameter
Symbol
VO
Conditions
Min
Typ
Max
3.006
6
Unit
V
OUTPUT VOLTAGE
INITIAL ACCURACY
A and C grades
A and C grades
2.994
3.000
VOERR
mV
0.2
3.003
3
%
OUTPUT VOLTAGE
INITIAL ACCURACY
VO
B grade
B grade
2.997
3.000
V
VOERR
mV
0.1
10
25
25
3
9
9
40
%
TEMPERATURE COEFFICIENT
TCVO
A grade, 8-lead SOIC, –40°C < TA < +125°C
A grade, 5-lead TSOT, –40°C < TA < +125°C
A grade, 5-lead SC70, –40°C < TA < +125°C
B grade, 8-lead SOIC, –40°C < TA < +125°C
B grade, 5-lead TSOT, –40°C < TA < +125°C
B grade, 5-lead SC70, –40°C < TA < +125°C
C grade, 8-lead SOIC, –40°C < TA < +125°C
3
ppm/°C
ppm/°C
ppm/°C
ppm/°C
ppm/°C
ppm/°C
ppm/°C
V
1
10
DROPOUT VOLTAGE
LINE REGULATION
VDO
2
∆VO/∆VIN
VIN = 5.0 V to 36.0 V, VIN = 5.0 V to 26.0 V for
ADR06WARZ, –40°C < TA < +125°C
7
30
70
1
ppm/V
LOAD REGULATION
∆VO/∆ILOAD ILOAD = 0 mA to 10 mA, –40°C < TA < +125°C,
IN = 7.0 V
40
ppm/mA
V
QUIESCENT CURRENT
IIN
No load, –40°C < TA < +125°C
0.1 Hz to 10.0 Hz
1 kHz
0.65
10
mA
VOLTAGE NOISE
eN p-p
eN
µV p-p
nV/√Hz
µs
VOLTAGE NOISE DENSITY
TURN-ON SETTLING TIME
LONG-TERM STABILITY1
OUTPUT VOLTAGE HYSTERESIS
RIPPLE REJECTION RATIO
SHORT CIRCUIT TO GND
TEMPERATURE SENSOR
Voltage Output at TEMP Pin
Temperature Sensitivity
510
4
tR
∆VO
∆VO_HYS
RRR
ISC
1000 hours
fIN = 10 kHz
50
ppm
ppm
dB
70
–75
30
mA
VTEMP
TCVTEMP
550
1.96
mV
mV/°C
1 The long-term stability specification is noncumulative. The drift in subsequent 1000 hour periods is significantly lower than in the first 1000 hour period.
Rev. R | Page 7 of 20
ADR01/ADR02/ADR03/ADR06
Data Sheet
ABSOLUTE MAXIMUM RATINGS
Ratings are at 25°C, unless otherwise noted.
THERMAL RESISTANCE
θJA is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Table 6.
Parameter
Rating
Supply Voltage
36.0 V
Indefinite
–65°C to +150°C
–40°C to +125°C
–65°C to +150°C
300°C
Table 7. Thermal Resistance
Package Type
Output Short-Circuit Duration to GND
Storage Temperature Range
Operating Temperature Range
Junction Temperature Range
Lead Temperature Range (Soldering, 60 sec)
θJA
θJC
Unit
°C/W
°C/W
°C/W
5-Lead SC70 (KS-5)
5-Lead TSOT (UJ-5)
8-Lead SOIC (R-8)
376
230
130
189
146
43
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
Rev. R | Page 8 of 20
Data Sheet
ADR01/ADR02/ADR03/ADR06
TERMINOLOGY
Dropout Voltage (VDO
)
Long-Term Stability (ΔVOUT_LTD
)
Dropout voltage, sometimes referred to as supply voltage head-
room or supply output voltage differential, is defined as the
minimum voltage differential between the input and output
necessary for the device to operate, such as
Long-term stability refers to the shift in output voltage at 25°C
after 1000 hours of operation in a 25°C environment. This may
also be expressed as either a shift in voltage or a difference in
parts per million from the nominal output as follows:
V
DO = (VIN – VOUT)min|IL = Constant
ΔVOUT_LTD = |VOUT(t1) – VOUT(t0)| [V]
VOUT (t1 )−VOUT (t0 )
Because the dropout voltage depends upon the current passing
through the device, it is always specified for a given load current.
ΔVOUT _ LTD
=
×106 [ppm]
VOUT (t0 )
Temperature Coefficient (TCVO)
where,
The temperature coefficient relates the change in output voltage
to the change in ambient temperature of the device, as normalized
by the output voltage at 25°C. This parameter is expressed in
ppm/°C and can be determined by the following equation:
V
V
OUT(t0) is the VOUT at 25°C at Time 0.
OUT(t1) is the VOUT at 25°C after 1000 hours of operation at 25°C.
Line Regulation
Line regulation refers to the change in output voltage in
response to a given change in input voltage, and is expressed in
either percent per volt, parts per million per volt, or microvolt
per volt change in input voltage. This parameter accounts for
the effects of self-heating.
VOUT (T2 ) −V (T )
×106
[
ppm/C
]
1
OUT
TCVO =
V
OUT (25C)×
(
T2 −T
)
1
where:
V
V
V
OUT(25°C) is the output voltage at 25°C.
OUT(T1) is the output voltage at Temperature 1.
OUT(T2) is the output voltage at Temperature 2.
Load Regulation
Load regulation refers to the change in output voltage in
response to a given change in load current, and is expressed
in either microvolts per milliampere, parts per million per
milliampere, or ohms of dc output resistance. This parameter
accounts for the effects of self-heating.
Output Voltage Hysteresis (ΔVOUT_HYS
)
Output voltage hysteresis represents the change in output
voltage after the device is exposed to a specified temperature
cycle. This may be expressed as either a shift in voltage or a
difference in parts per million from the nominal output as follows:
VOUT_HYS = VOUT(25°C) – VOUT_TC [V]
V
OUT (25C) −VOUT _TC
VOUT _HYS
=
×106 [ppm]
V
OUT (25C)
where:
VOUT(25°C) is the output voltage at 25°C.
VOUT_TC is the output voltage after temperature cycling.
Thermal hysteresis occurs as a result of forces exhibited upon
the internal die by its packaging. The effect is more pronounced
in parts with smaller packages.
Rev. R | Page 9 of 20
ADR01/ADR02/ADR03/ADR06
Data Sheet
TYPICAL PERFORMANCE CHARACTERISTICS
3.002
3.001
3.000
10.010
10.005
10.000
9.995
9.990
9.985
2.999
2.998
–40 –25 –10
5
20
35
50
65
80
95 110 125
–40 –25 –10
5
20
35
50
65
80
95 110 125
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure 3. ADR01 Typical Output Voltage vs. Temperature
Figure 6. ADR06 Typical Output Voltage vs. Temperature
5.008
0.8
0.7
0.6
5.004
5.000
+125°C
+25°C
–40°C
0.5
0.4
4.996
4.992
–40 –25 –10
5
20
35
50
65
80
95 110 125
12
16
20
24
28
32
36
INPUT VOLTAGE (V)
TEMPERATURE (°C)
Figure 4. ADR02 Typical Output Voltage vs. Temperature
Figure 7. ADR01 Supply Current vs. Input Voltage
2.502
0.8
0.7
0.6
+125°C
2.501
2.500
+25°C
–40°C
0.5
0.4
2.499
2.498
8
12
16
20
24
28
32
36
–40 –25 –10
5
20
35
50
65
80
95 110 125
TEMPERATURE (°C)
INPUT VOLTAGE (V)
Figure 5. ADR03 Typical Output Voltage vs. Temperature
Figure 8. ADR02 Supply Current vs. Input Voltage
Rev. R | Page 10 of 20
Data Sheet
ADR01/ADR02/ADR03/ADR06
0.85
50
40
30
20
10
0
I
= 0mA TO 5mA
L
0.80
0.75
0.70
0.65
V
= 36V
IN
+125°C
+25°C
0.60
0.55
0.50
–40°C
V
= 8V
IN
–10
–20
0.45
0.40
5
10
15
20
25
30
35 36
–40
0
25
TEMPERATURE (°C)
85
125
INPUT VOLTAGE (V)
Figure 9. ADR03 Supply Current vs. Input Voltage
Figure 12. ADR02 Load Regulation vs. Temperature
0.80
0.75
0.70
0.65
0.60
0.55
0.50
0.45
0.40
60
50
I
= 0mA TO 10mA
L
V
= 7V
IN
+125°C
40
30
20
V
= 36V
IN
+25°C
–40°C
10
0
–40 –25 –10
5
20
35
50
65
80
95 110 125
5
10
15
20
25
30
35 36
TEMPERATURE (°C)
INPUT VOLTAGE (V)
Figure 10. ADR06 Supply Current vs. Input Voltage
Figure 13. ADR03 Load Regulation vs. Temperature
40
30
40
30
I
= 0mA TO 10mA
L
I
= 0mA TO 10mA
L
V
= 36V
IN
V
= 36V
IN
20
10
20
10
0
V
= 14V
IN
0
–10
–20
V
= 7V
IN
–10
–20
–30
–30
–40
–40
0
50
TEMPERATURE (°C)
25
85
125
–40 –25 –10
5
20
35
50
65
80
95 110 125
TEMPERATURE (°C)
Figure 11. ADR01 Load Regulation vs. Temperature
Figure 14. ADR06 Load Regulation vs. Temperature
Rev. R | Page 11 of 20
ADR01/ADR02/ADR03/ADR06
Data Sheet
10
8
2
V
= 14V TO 36V
IN
V
= 6V TO 36V
IN
0
–2
–4
–6
6
4
2
0
–8
–2
–4
–10
–40 –25 –10
5
20
35 50
65
80
95 110 125
–40 –25 –10
5
20
35
50
65
80
95 110 125
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure 18. ADR06 Line Regulation vs. Temperature
Figure 15. ADR01 Line Regulation vs. Temperature
5
8
4
V
= 8V TO 36V
IN
4
3
2
+125°C
0
–40°C
–4
–8
1
0
+25°C
0
2
4
6
8
10
–40 –25 –10
5
20
35
50
65
80
95 110 125
LOAD CURRENT (mA)
TEMPERATURE (°C)
Figure 19. ADR01 Minimum Input-Output
Voltage Differential vs. Load Current
Figure 16. ADR02 Line Regulation vs. Temperature
8
4
2
0
4
2
V
= 5V TO 36V
IN
+125°C
0
–40°C
–2
+25°C
–4
0
2
4
6
8
10
–40 –25 –10
5
20
35 50
65
80
95 110 125
LOAD CURRENT (mA)
TEMPERATURE (°C)
Figure 17. ADR03 Line Regulation vs. Temperature
Figure 20. ADR02 Dropout Voltage vs. Load Current
Rev. R | Page 12 of 20
Data Sheet
ADR01/ADR02/ADR03/ADR06
6
5
4
3
+125°C
+25°C
2
–40°C
1
0
0
TIME (1s/DIV)
2
4
6
8
10
LOAD CURRENT (mA)
Figure 21. ADR03 Dropout Voltage vs. Load Current
Figure 24. ADR02 Typical Noise Voltage 0.1 Hz to 10.0 Hz
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
+125°C
+25°C
–40°C
TIME (1ms/DIV)
0
2
4
6
8
10
LOAD CURRENT (mA)
Figure 22. ADR06 Dropout Voltage vs. Load Current
Figure 25. ADR02 Typical Noise Voltage 10 Hz to 10 kHz
0.70
0.65
0.60
10V
8V
T
= 25°C
A
V
5V/DIV
OUT
0.55
0.50
NO LOAD CAPACITOR
NO INPUT CAPACITOR
TIME (2ms/DIV)
0
2
4
6
8
10
LOAD CURRENT (mA)
Figure 26. ADR02 Line Transient Response
Figure 23. ADR01 Quiescent Current vs. Load Current
Rev. R | Page 13 of 20
ADR01/ADR02/ADR03/ADR06
Data Sheet
C
= 0.01µF
NO LOAD CAPACITOR
IN
NO LOAD CAPACITOR
V
10V/DIV
IN
V
5V/DIV
IN
LOAD OFF
LOAD ON
V
100mV/DIV
V
5V/DIV
OUT
OUT
LOAD = 5mA
TIME (1ms/DIV)
TIME (4µs/DIV)
Figure 27. ADR02 Load Transient Response
Figure 30. ADR02 Turn-On Response
C
= 100nF
LOAD
V
10V/DIV
IN
V
5V/DIV
IN
C
= 0.01µF
L
NO INPUT CAPACITOR
LOAD OFF
LOAD ON
V
100mV/DIV
V
5V/DIV
OUT
OUT
LOAD = 5mA
TIME (1ms/DIV)
TIME (4µs/DIV)
Figure 28. ADR02 Load Transient Response
Figure 31. ADR02 Turn-Off with No Input Capacitor
C
= 0.01µF
L
NO INPUT CAPACITOR
V
10V/DIV
V
10V/DIV
IN
IN
C
= 0.01µF
IN
NO LOAD CAPACITOR
V
5V/DIV
V
5V/DIV
OUT
OUT
TIME (4µs/DIV)
TIME (4µs/DIV)
Figure 29. ADR02 Turn-Off Response
Figure 32. ADR02 Turn-Off with No Input Capacitor
Rev. R | Page 14 of 20
Data Sheet
ADR01/ADR02/ADR03/ADR06
APPLICATIONS INFORMATION
ADR03 can be adjusted from 2.3 V to 2.8 V. Adjustment of the
output does not significantly affect the temperature performance
of the device, provided the temperature coefficients of the resis-
tors are relatively low.
OVERVIEW
The ADR01/ADR02/ADR03/ADR06 are high precision, low
drift 10.0 V, 5.0 V, 2.5 V, and 3.0 V voltage references available
in an ultracompact footprint. The 8-lead SOIC versions of the
devices are drop-in replacements of the REF01/REF02/REF03
sockets with improved cost and performance.
U1
ADR01/
ADR02/
ADR03/
ADR06
These devices are standard band gap references (see Figure 34).
The band gap cell contains two NPN transistors (Q18 and Q19)
that differ in emitter area by 2×. The difference in their VBE
produces a proportional-to-absolute temperature current (PTAT)
in R14, and, when combined with the VBE of Q19, produces a
band gap voltage, VBG, that is almost constant in temperature.
With an internal op amp and the feedback network of R5 and
R6, VO is set precisely at 10.0 V, 5.0 V, 2.5 V, and 3.0 V for the
ADR01, ADR02, ADR06, and ADR03, respectively. Precision
laser trimming of the resistors and other proprietary circuit
techniques are used to further enhance the initial accuracy,
temperature curvature, and drift performance of the ADR01/
ADR02/ADR03/ADR06.
V
V
V
O
V
IN
OUT
IN
C1
0.1µF
C2
0.1µF
TEMP TRIM
GND
Figure 33. Basic Configuration
V
IN
R4
R1
Q1
R2
R3
Q23
Q2
Q3
Q7
Q8
Q9
D1
D2
Q10
V
Q4
O
The PTAT voltage is made available at the TEMP pin of the
ADR01/ADR02/ADR03/ADR06. It has a stable 1.96 mV/°C
temperature coefficient, such that users can estimate the
temperature change of the device by knowing the voltage
change at the TEMP pin.
D3
C1
Q13
R5
Q12
R12
R13
I1
R20
TRIM
Q14 Q15
2×
V
BG
APPLYING THE ADR01/ADR02/ADR03/ADR06
Input and Output Capacitors
1×
Q19
Q18
R27
R14
TEMP
Q16
Q17
Although the ADR01/ADR02/ADR03/ADR06 are designed to
function stably without any external components, connecting a
0.1 μF ceramic capacitor to the output is highly recommended
to improve stability and filter out low level voltage noise. An
additional 1 μF to 10 μF electrolytic, tantalum, or ceramic
capacitor can be added in parallel to improve transient per-
formance in response to sudden changes in load current;
however, the designer should keep in mind that doing so
increases the turn-on time of the device.
Q20
R6
R32
R24
R41
R42
R17 R11
GND
Figure 34. Simplified Schematic Diagram
U1
ADR01/
ADR02/
ADR03/
ADR06
V
V
IN
V
OUT
V
O
IN
A 1 μF to 10 μF electrolytic, tantalum or ceramic capacitor can
also be connected to the input to improve transient response in
applications where the supply voltage may fluctuate. An addi-
tional 0.1 μF ceramic capacitor should be connected in parallel
to reduce supply noise. Mount both input and output capacitors
as close to the device pins as possible.
POT
10kΩ
TEMP TRIM
GND
R1
470kΩ
R2
1kΩ
Figure 35. Optional Trim Adjustment
Output Adjustment
Temperature Monitoring
The ADR01/ADR02/ADR03/ADR06 trim terminal can be used
to adjust the output voltage over a nominal voltage. This feature
allows a system designer to trim system errors by setting the
reference to a voltage other than 10.0 V/5.0 V/2.5 V/3.0 V. For
finer adjustment, add a series resistor of 470 kΩ. With the con-
figuration shown in Figure 35, the ADR01 can be adjusted from
9.70 V to 10.05 V, the ADR02 can be adjusted from 4.95 V to
5.02 V, the ADR06 can be adjusted from 2.8 V to 3.3 V, and the
As described at the end of the Overview section, the ADR01/
ADR02/ADR03/ADR06 provide a TEMP output (Pin 1 in Figure 1
and Pin 3 in Figure 2) that varies linearly with temperature.
This output can be used to monitor the temperature change in the
system. The voltage at VTEMP is approximately 550 mV at 25°C,
and the temperature coefficient is approximately 1.96 mV/°C
(see Figure 36). A voltage change of 39.2 mV at the TEMP pin
corresponds to a 20°C change in temperature.
Rev. R | Page 15 of 20
ADR01/ADR02/ADR03/ADR06
Data Sheet
V
0.80
IN
V
= 15V
IN
SAMPLE SIZE = 5
I
IN
0.75
0.70
ADR01/
ADR02/
ADR03/
ADR06
V
OUT
0.65
0.60
R
I
I
= (V
– V )/R
SET
OUT
L
SET
SET
GND
ΔV
/ΔT ≈ 1.96mV/°C
TEMP
V
L
0.55
0.50
0.45
I
≈ 0.6mA
Q
= I
SET
+ I
Q
R
L
L
0.40
Figure 38. Low Cost Current Source
–50
–25
0
25
50
75
100
125
TEMPERATURE (°C)
PRECISION CURRENT SOURCE WITH
ADJUSTABLE OUTPUT
Figure 36. Voltage at TEMP Pin vs. Temperature
The TEMP function is provided as a convenience rather than a
precise feature. Because the voltage at the TEMP node is
acquired from the band gap core, current pulling from this pin
has a significant effect on VOUT. Care must be taken to buffer the
TEMP output with a suitable low bias current op amp, such as
the AD8601, AD820, or OP1177, all of which result in less than
a 100 µV change in ∆VOUT (see Figure 37). Without buffering,
even tens of microamps drawn from the TEMP pin can cause
Alternatively, a precision current source can be implemented
with the circuit shown in Figure 39. By adding a mechanical or
digital potentiometer, this circuit becomes an adjustable current
source. If a digital potentiometer is used, the load current is
simply the voltage across Terminal B to Terminal W of the
digital potentiometer divided by RSET
.
V
REF ×D
RSET
(1)
IL =
V
OUT to fall out of specification.
U1
where D is the decimal equivalent of the digital potentiometer
input code.
ADR01/
ADR02/
ADR03/
ADR06
15V
U1
ADR01/
ADR02/
V
V
V
V
O
IN
IN
OUT
ADR03/
TEMP TRIM
GND
V+
OP1177
0V TO (5V + V )
V
ADR06
L
TEMP
V
V
OUT
1.9mV/°C
+12V
IN
B
V–
U2
AD5201
W
TEMP TRIM
GND
100kΩ
A
+12V
R
1kΩ
SET
Figure 37. Temperature Monitoring
U2
V+
OP1177
V–
LOW COST CURRENT SOURCE
–5V TO V
V
L
L
Unlike most references, the ADR01/ADR02/ADR03/ADR06
employ an NPN Darlington in which the quiescent current
remains constant with respect to the load current, as shown in
Figure 23. As a result, a current source can be configured as
shown in Figure 38 where ISET = (VOUT − VL)/RSET. IL is simply
the sum of ISET and IQ. Although simple, IQ varies typically from
0.55 mA to 0.65 mA, limiting this circuit to general-purpose
applications.
R
L
1kΩ
I
L
–12V
Figure 39. Programmable 0 mA to 5 mA Current Source
To optimize the resolution of this circuit, dual-supply op amps
should be used because the ground potential of ADR02 can
swing from −5.0 V at zero scale to VL at full scale of the
potentiometer setting.
Rev. R | Page 16 of 20
Data Sheet
ADR01/ADR02/ADR03/ADR06
Vt
It
R1′
R1′R2
R1R2′
PROGRAMMABLE 4 mA TO 20 mA CURRENT
TRANSMITTER
(3)
ZO
=
=
−1
Because of their precision, adequate current handling, and small
footprint, the devices are suitable as the reference sources for
many high performance converter circuits. One of these
applications is the multichannel 16-bit, 4 mA to 20 mA current
transmitter in the industrial control market (see Figure 40).
This circuit employs a Howland current pump at the output to
yield better efficiency, a lower component count, and a higher
voltage compliance than the conventional design with op amps
and MOSFETs. In this circuit, if the resistors are matched such
that R1 = R1′, R2 = R2′, R3 = R3′, the load current is
In this circuit, an ADR01 provides the stable 10.000 V reference
for the AD5544 quad 16-bit DAC. The resolution of the adjust-
able current is 0.3 µA/step; the total worst-case INL error is
merely 4 LSBs. Such error is equivalent to 1.2 µA or a 0.006%
system error, which is well below most systems’ requirements.
The result is shown in Figure 41 with measurement taken at 25°C
and 70°C; total system error of 4 LSBs at both 25°C and 70°C.
5
R
= 500Ω
L
I
= 0mA TO 20mA
L
4
3
(R2 + R3) R1
R3′
V
REF ×D
IL =
×
(2)
2N
where D is similarly the decimal equivalent of the DAC input
code and N is the number of bits of the DAC.
2
According to Equation 2, R3′ can be used to set the sensitivity.
R3′ can be made as small as necessary to achieve the current
needed within U4 output current driving capability. Alter-
natively, other resistors can be kept high to conserve power.
25°C
70°C
1
0
In this circuit, the AD8512 is capable of delivering 20 mA of
current, and the voltage compliance approaches 15.0 V.
–1
0
8192 16384 24576 32768 40960 49152 57344 65536
CODE (Decimal)
0V TO –10V
Figure 41. Result of Programmable 4 mA to 20 mA Current Transmitter
5V
U2
+15V
R1
150kΩ
R2
15kΩ
U1
V
RF
V
V
DD
IO
15V
PRECISION BOOSTED OUTPUT REGULATOR
10V
AD5544
IO
V
U3
–15V
REF
IN
OUT
V
VP
X
GND
A precision voltage output with boosted current capability can
be realized with the circuit shown in Figure 42. In this circuit,
U2 forces VO to be equal to VREF by regulating the turn-on of
N1, thereby making the load current furnished by VIN. In this
configuration, a 50 mA load is achievable at VIN of 15.0 V.
Moderate heat is generated on the MOSFET, and higher current
can be achieved with a replacement of a larger device. In
addition, for a heavy capacitive load with a fast edging input
signal, a buffer should be added at the output to enhance the
transient response.
TEMP TRIM
GND
C1
R3
50Ω
10pF
U4
DIGITAL INPUT
CODE 20%–100% FULL SCALE
AD8512
V
O
R3'
50Ω
R2'
15kΩ
V
U1 = ADR01/ADR02/ADR03/ADR06, REF01
U2 = AD5543/AD5544/AD5554
U3, U4 = AD8512
L
VN
R1'
150kΩ
LOAD
500Ω
4mA TO 20mA
N1
Figure 40. Programmable 4 mA to 20 mA Transmitter
V
V
O
IN
R
200Ω
C
L
1µF
U1
L
The Howland current pump yields a potentially infinite output
impedance, that is highly desirable, but resistance matching is
critical in this application. The output impedance can be deter-
mined using Equation 3. As shown by this equation, if the
resistors are perfectly matched, ZO is infinite. Alternatively, if
they are not matched, ZO is either positive or negative. If the
latter is true, oscillation can occur. For this reason, connect
Capacitor C1 in the range of 1 pF to 10 pF between VP and the
output terminal of U4 to filter any oscillation.
2N7002
ADR01/
ADR02/
ADR03/
ADR06
V
15V
V+
R
R
2
1
100Ω
100Ω
V
OUT
IN
OP1177
V–
TEMP TRIM
GND
U2
C
1
1000pF
Figure 42. Precision Boosted Output Regulator
Rev. R | Page 17 of 20
ADR01/ADR02/ADR03/ADR06
OUTLINE DIMENSIONS
Data Sheet
2.20
2.00
1.80
2.40
2.10
1.80
5
1
4
3
1.35
1.25
1.15
2
0.65 BSC
1.10
1.00
0.90
0.70
0.40
0.10
0.80
0.46
0.36
0.26
0.22
0.08
SEATING
PLANE
0.10 MAX
0.30
0.15
COPLANARITY
0.10
COMPLIANT TO JEDEC STANDARDS MO-203-AA
Figure 43. 5-Lead Thin Shrink Small Outline Transistor Package [SC70]
(KS-5)
Dimensions shown in millimeters
2.90 BSC
5
1
4
3
2.80 BSC
1.60 BSC
2
0.95 BSC
1.90
BSC
*
0.90 MAX
0.70 MIN
*
1.00 MAX
0.20
0.08
8°
4°
0°
0.10 MAX
0.50
0.30
0.60
0.45
0.30
SEATING
PLANE
*
COMPLIANT TO JEDEC STANDARDS MO-193-AB WITH
THE EXCEPTION OF PACKAGE HEIGHT AND THICKNESS.
Figure 44. 5-Lead Thin Small Outline Transistor Package [TSOT]
(UJ-5)
Dimensions shown in millimeters
5.00 (0.1968)
4.80 (0.1890)
8
1
5
4
6.20 (0.2441)
5.80 (0.2284)
4.00 (0.1574)
3.80 (0.1497)
0.50 (0.0196)
0.25 (0.0099)
1.27 (0.0500)
BSC
45°
1.75 (0.0688)
1.35 (0.0532)
0.25 (0.0098)
0.10 (0.0040)
8°
0°
0.51 (0.0201)
0.31 (0.0122)
COPLANARITY
0.10
1.27 (0.0500)
0.40 (0.0157)
0.25 (0.0098)
0.17 (0.0067)
SEATING
PLANE
COMPLIANT TO JEDEC STANDARDS MS-012-AA
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 45. 8-Lead Standard Small Outline Package [SOIC_N]
Narrow Body (R-8)
Dimensions shown in millimeters and (inches)
Rev. R | Page 18 of 20
Data Sheet
ADR01/ADR02/ADR03/ADR06
ORDERING GUIDES
ADR01 Ordering Guide
Output
Voltage
VO (V)
Initial Accuracy
Temperature
Coefficient
(ppm/°C)
Temperature
Range
Package
Package Ordering
Model1, 2
(mV)
10
10
5
(%)
0.1
0.1
0.05
0.05
0.14
0.14
0.1
0.05
0.1
0.05
0.1
Description
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
5-Lead TSOT
5-Lead TSOT
5-Lead SC70
5-Lead SC70
8-Lead SOIC_N
8-Lead SOIC_N
Option
Quantity
Branding
ADR01ARZ
ADR01ARZ-REEL7
ADR01BRZ
10
10
10
10
10
10
10
10
10
10
10
10
10
10
3
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
R-8
98
R-8
R-8
1,000
98
ADR01BRZ-REEL7
ADR01WARZ-R7
ADR01WARZ-RL
ADR01AUJZ-REEL7
ADR01BUJZ-REEL7
ADR01AKSZ-REEL7
ADR01BKSZ-REEL7
ADR01CRZ
5
3
R-8
R-8
R-8
UJ-5
UJ-5
KS-5
KS-5
R-8
1000
1,000
2,500
3,000
3,000
3,000
3,000
98
14
14
10
5
10
5
10
10
25
9
25
9
R1E
R1F
R1E
R1F
10
10
40
40
ADR01CRZ-REEL
0.1
R-8
2,500
1 Z = RoHS Compliant Part.
2 W = Qualified for automotive applications.
ADR02 Ordering Guide
Output
Voltage
VO (V)
Initial Accuracy
Temperature
Coefficient
(ppm/°C)
Temperature
Range
Package
Description
Package
Option
Ordering
Quantity
Model1, 2
(mV)
5
5
(%)
0.1
0.1
Branding
ADR02AR
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
10
10
10
10
10
10
10
10
3
3
25
9
9
25
9
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
5-Lead TSOT
5-Lead TSOT
5-Lead TSOT
5-Lead SC70
5-Lead SC70
8-Lead SOIC_N
8-Lead SOIC_N
R-8
R-8
R-8
R-8
R-8
R-8
R-8
R-8
R-8
98
ADR02AR-REEL
ADR02AR-REEL7
ADR02ARZ
ADR02ARZ-REEL
ADR02ARZ-REEL7
ADR02WARZ-REEL
ADR02WARZ-REEL7
ADR02BRZ
ADR02BRZ-REEL7
ADR02AUJZ-REEL7
ADR02BUJZ-R2
ADR02BUJZ-REEL7
ADR02AKSZ-REEL7
ADR02BKSZ-REEL7
ADR02CRZ
2,500
1,000
98
2,500
1,000
2,500
1,000
98
1,000
3,000
250
3,000
3,000
3,000
98
5
0.1
5
0.1
5
0.1
5
0.1
5
0.1
5
0.1
3
3
5
0.06
0.06
0.1
R-8
UJ-5
UJ-5
UJ-5
KS-5
KS-5
R-8
R1G
R1H
R1H
R1G
R1H
3
3
5
0.06
0.06
0.1
3
5
0.06
0.1
40
40
ADR02CRZ-REEL
5
0.1
R-8
2,500
1 Z = RoHS Compliant Part.
2 W = Qualified for automotive applications.
Rev. R | Page 19 of 20
ADR01/ADR02/ADR03/ADR06
Data Sheet
ADR03 Ordering Guide
Output
Voltage
VO (V)
Initial Accuracy
Temperature
Coefficient
(ppm/°C)
Temperature
Range
Package
Description
Package Ordering
Model1, 2
(mV)
5
(%)
0.2
0.2
0.2
0.2
0.2
0.1
0.1
0.1
0.2
0.1
0.2
0.1
0.1
0.1
Option
Quantity
1,000
98
Branding
ADR03AR-REEL7
ADR03ARZ
ADR03ARZ-REEL7
ADR03WARZ-R7
ADR03WARZ-RL
ADR03BR
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
10
10
10
10
10
3
3
3
25
9
25
9
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
5-Lead TSOT
5-Lead TSOT
5-Lead SC70
5-Lead SC70
8-Lead SOIC_N
8-Lead SOIC_N
R-8
R-8
5
5
5
5
R-8
R-8
R-8
R-8
1,000
1,000
2500
98
2.5
2.5
2.5
5
ADR03BRZ
R-8
98
ADR03BRZ-REEL7
ADR03AUJZ-REEL7
ADR03BUJZ-REEL7
ADR03AKSZ-REEL7
ADR03BKSZ-REEL7
ADR03CRZ
R-8
1,000
3,000
3,000
3,000
3,000
98
UJ-5
UJ-5
KS-5
KS-5
R-8
R1J
R1K
R1J
R1K
2.5
5
2.5
5
5
40
40
ADR03CRZ-REEL
R-8
2,500
1 Z = RoHS Compliant Part.
2 W = Qualified for automotive applications.
ADR06 Ordering Guide
Output
Voltage
VO (V)
Initial Accuracy Temperature
Coefficient
Temperature
Range
Package
Description
Package Ordering
Model1, 2
(mV)
(%)
0.2
0.2
0.2
0.2
0.1
0.1
0.2
0.1
0.2
0.1
0.2
(ppm/°C)
Option
Quantity
Branding
ADR06ARZ
3
3
3
3
3
3
3
3
3
3
3
6
6
6
6
3
3
6
3
6
3
6
10
10
10
10
3
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
R-8
98
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
5-Lead TSOT
ADR06ARZ-REEL7
ADR06WARZ-R7
ADR06WARZ-RL
ADR06BRZ
R-8
1,000
1,000
2500
98
R-8
R-8
R-8
ADR06BRZ-REEL7
ADR06AUJZ-REEL7
ADR06BUJZ-REEL7
ADR06AKSZ-REEL7
ADR06BKSZ-REEL7
ADR06CRZ-REEL
3
R-8
1,000
3,000
3,000
3,000
3,000
2,500
25
9
25
9
UJ-5
UJ-5
KS-5
KS-5
R-8
R1L
R1M
R1L
5-Lead TSOT
5-Lead SC70
5-Lead SC70
R1M
40
8-Lead SOIC_N
1 Z = RoHS Compliant Part.
2 W = Qualified for automotive applications.
AUTOMOTIVE PRODUCTS
The ADR01W, ADR02W, ADR03W and ADR06W models are available with controlled manufacturing to support the quality and
reliability requirements of automotive applications. Note that these automotive models may have specifications that differ from the
commercial models; therefore, designers should review the Specifications section of this data sheet carefully. Only the automotive grade
products shown are available for use in automotive applications. Contact your local Analog Devices account representative for specific
product ordering information and to obtain the specific Automotive Reliability reports for these models.
©2002–2012 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D02747-0-1/12(R)
Rev. R | Page 20 of 20
相关型号:
ADR03AKS-R
IC 1-OUTPUT THREE TERM VOLTAGE REFERENCE, 2.5 V, PDSO5, MO-203AA, SC-70, 5 PIN, Voltage Reference
ADI
ADR03AKS-REEL7
1-OUTPUT THREE TERM VOLTAGE REFERENCE, 2.5 V, PDSO5, MO-203-AA, SC-70, 5 PIN
ROCHESTER
©2020 ICPDF网 联系我们和版权申明