ADR280ARTZ-REEL71 [ADI]
1.2 V Ultralow Power High PSRR Voltage Reference; 1.2 V超低功耗高PSRR基准电压源
| 型号： | ADR280ARTZ-REEL71 |
| 厂家： | 
ADI |
| 描述： | 1.2 V Ultralow Power High PSRR Voltage Reference |
| 文件： | 总12页 (文件大小：849K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
1.2 V Ultralow Power
High PSRR Voltage Reference
ADR280
FEATURES
PIN CONFIGURATIONS
1.2 V precision output
V+
1
2
Excellent line regulation: 2 ppm/V typical
High power supply ripple rejection: –80 dB at 220 Hz
Ultralow power supply current: 16 μA maximum
Temperature coefficient: 40 ppm/°C maximum
Low noise, 12.5 nV/√Hz typical
ADR280
3
V–
V
V
OUT
Figure 1. 3-Lead SOT-23
(RT Suffix)
Operating supply range, 2.4 V to 5.5 V
Compact 3-lead SOT-23 and SC70 packages
1
OUT
V+
APPLICATIONS
ADR280
3
V–
List GSM, GPRS, 3G mobile stations
Portable battery-operated electronics
Low voltage converter references
Wireless devices
2
Figure 2. 3-Lead SC70
(KS Suffix)
GENERAL DESCRIPTION
The ADR280 is a 1.2 V band gap core reference with excellent
line regulation and power supply rejection designed specifically
for applications experiencing heavy dynamic supply variations,
such as data converter references in GSM, GPRS, and 3G
mobile station applications. Devices such as the AD6535 that
have an analog baseband IC with on-board baseband, audio
codecs, voltage regulators, and battery chargers rely on the
ability of the ADR280 to reject input battery voltage variations
during RF power amplifier activity.
15
10
5
3V TO 5V
0
–5
–10
–15
In addition to mobile stations, the ADR280 is suitable for a
variety of general-purpose applications. Most band gap refer-
ences include internal gain for specific outputs, which simplifies
the user’s design, but compromises on the cost, form factor, and
flexibility. The ADR280, on the other hand, optimizes the band
gap core voltage and allows users to tailor the voltage, current,
or transient response by simply adding their preferred op amps.
–40
–20
0
20
40
60
80
100
TEMPERATURE (°C)
Figure 3. Line Regulation vs. Temperature
The ADR280 operates on a wide supply voltage range from
2.4 V to 5.5 V. It is available in compact 3-lead SOT-23 and
SC70 packages. The device is specified over the extended indus-
trial temperature range of −40°C to +85°C.
Rev. C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 www.analog.com
Fax: 781.461.3113 ©2002–2007 Analog Devices, Inc. All rights reserved.
ADR280
TABLE OF CONTENTS
Features .............................................................................................. 1
Thermal Resistance.......................................................................4
ESD Caution...................................................................................4
Typical Performance Characteristics ..............................................5
Theory of Operation .........................................................................7
Applications Information.................................................................8
Low Cost, Low Power Current Source .......................................8
Outline Dimensions....................................................................... 10
Ordering Guide .......................................................................... 11
Applications....................................................................................... 1
General Description......................................................................... 1
Pin Configurations ........................................................................... 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
Electrical Characteristics............................................................. 3
Absolute Maximum Ratings............................................................ 4
REVISION HISTORY
4/07—Rev. B to Rev. C
6/03—Rev. 0 to Rev. A
Updated Format..................................................................Universal
Changes to Figure 1, Figure 2.......................................................... 1
Deleted Pin Function Descriptions Section and Pin
Configurations Section .................................................................... 2
Changes to Figure 20 and Figure 21............................................... 9
Updated Outline Dimensions....................................................... 10
Added SC70 package..........................................................Universal
Changes to Features ..........................................................................1
Changes to General Description .....................................................1
Changes to Specifications.................................................................2
Changes to Ordering Guide.............................................................2
Changes to TPCs 4, 6, and 7 ............................................................3
Updated SOT-23 Outline Dimensions ...........................................7
10/04—Rev. A to Rev. B
11/02—Revision 0: Initial Version
Changes to Pin Configurations.........................................Universal
Changes to Ordering Guide ............................................................ 2
Changes to Outline Dimensions..................................................... 7
Rev. C | Page 2 of 12
ADR280
SPECIFICATIONS
ELECTRICAL CHARACTERISTICS
VIN = 2.55 V to 5.5 V, TA = 25°C, unless otherwise noted.
Table 1.
Parameter
Symbol
VOUT
TCVO
Conditions
Min
Typ1
Max
Unit
V
Output Voltage
Temperature Coefficient
2.4 V < VIN < 5.5 V, 0 μA < IOUT < 10 μA, −40°C < TA < +85°C
0°C < TA < 50°C
1.195 1.200 1.205
5
20
ppm/°C
ppm/°C
ppm/V
μA
μA
V
°C
μF
μV rms
nV/√Hz
dB
–40°C < TA < +85°C
ΔVOUT/ΔVIN 2.55 V < VIN < 5.5 V, no load
10
2
10
12
40
12
16
20
5.5
+85
Line Regulation
Supply Current
Ground Current
Input Voltage Range
Operating Temperature Range
Nominal Load Capacitance
Output Noise Voltage
Voltage Noise Density
Power Supply Ripple Rejection2 PSRR
Start-Up Time tON
IIN
IGND
VIN
2.4 V < VIN < 5.5 V, no load
V– grounded, ILOAD = 10 μA
2.4
−40
1
TA
COUT
VN rms
eN
f = 10 Hz to 10 kHz
f = 400 kHz
ILOAD = 10 μA
12.5
12.5
−80
2
ms
1 Typical values represent average readings taken at room temperature.
2 Power supply ripple rejection measurement applies to a changing input voltage (VIN) waveform with a nominal 3.6 V baseline that drops to a 3 V value for 380 μs at a
4.6 ms repetition rate.
Rev. C | Page 3 of 12
ADR280
ABSOLUTE MAXIMUM RATINGS
THERMAL RESISTANCE
TA = 25°C, unless otherwise noted.
θJA is specified for the worst-case conditions, that is, θJA is
specified for a device soldered in circuit board for surface-
mount packages.
Table 2.
Parameter
Rating
Supply Voltage
6 V
Table 3.
Package Type
Storage Temperature Range
Operating Temperature Range
Junction Temperature Range
Lead Temperature Range (Soldering, 60 Sec)
−65°C to +150°C
−40°C to +85°C
−65°C to +150°C
300°C
θJA
θJC
Unit
°C/W
°C/W
SOT-23
SC70
230
376
146
102
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
Rev. C | Page 4 of 12
ADR280
TYPICAL PERFORMANCE CHARACTERISTICS
15
10
5
1.20225
1.20200
NO LOAD
1.20175
1.20150
1.20125
1.20100
1.20075
1.20050
1.20025
1.20000
3V TO 5V
0
–5
–10
–15
–40
–20
0
20
40
60
80
100
–40
–20
0
20
40
60
80
100
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure 4. VOUT vs. Temperature
Figure 6. Line Regulation vs. Temperature
15
14
13
12
11
10
9
V
= 5V
IN
1
V
= 3V
IN
–40
–20
0
20
40
60
80
100
CH1 50.0µV
M 1.00s
TEMPERATURE (°C)
Figure 7. Noise Voltage Peak-to-Peak, 10 Hz to 10 kHz
Figure 5. Supply Current vs. Temperature
Rev. C | Page 5 of 12
ADR280
T
1.2
1.0
0.8
0.6
0.4
0.2
0
–40
–60
tS
–80
–100
0
2
4
6
8
10
12
14
16
18
20
0
2.5
5.0
7.5
10.0
TIME (ms)
FREQUENCY (kHz)
Figure 8. Output Noise Density Plot (V+ = 3.6 V, COUT = 1 μF, CIN = 1 μF)
Figure 10. Settling Time
–40dB
10dB/DIV
0Hz
100kHz
Figure 9. Voltage Noise Density, 0 Hz to 100 kHz
Rev. C | Page 6 of 12
ADR280
THEORY OF OPERATION
V+
The ADR280 provides the basic core 1.2 V band gap reference.
It contains two NPN transistors, Q9 and Q17, with their emitter
areas scaled in a fixed ratio. The difference in the VBE produces
a proportional to absolute temperature (PTAT) voltage that
cancels the complementary to absolute temperature (CTAT) Q9
R2
R1
R3
R12
I1
Q2
Q7
Q1
Q10
C1
R4
VBE voltage. As a result, a core band gap voltage that is almost a
R13
constant 1.2 V over temperature is generated (see Figure 11).
Precision laser trimming of the internal resistors and other
proprietary circuit techniques are used to enhance the initial
accuracy, temperature curvature, and temperature drift
performance.
PNP3
R10
Q3
Q17
Q18
Q9
Q6
V
OUT
Q5
R7
R5
R6
R8
R11
R9
V–
Figure 11. Simplified Architecture
Rev. C | Page 7 of 12
ADR280
APPLICATIONS INFORMATION
U1
V+
The ADR280 should be decoupled with a 0.1 μF ceramic
capacitor at the output for optimum stability. It is also good
practice to include 0.1 μF ceramic capacitors at the IC supply
pin. These capacitors should be mounted close to their
respective pins (see Figure 12).
5V
ADR280
5V
V+
V–
1.2V
U2
+
V
V
O
OUT
V+
C1
0.1µF
1.8V
AD8541
V–
0.1µF
–
C2
2.2pF
ADR280
R2
60kΩ ± 0.1%
V–
R1
V
120kΩ ± 0.1%
OUT
0.1µF
Figure 15. 1.8 V Reference
Figure 12. Basic Configuration
LOW COST, LOW POWER CURRENT SOURCE
The low supply voltage input pin V− can be elevated above
ground; a 1.2 V differential voltage can therefore be established
above V− (see Figure 13).
Because of its low power characteristics, the ADR280 can be
converted to a current source with just a setting resistor. In
addition to the ADR280 current capability, the supply voltage
and the load limit the maximum current. The circuit in Figure 16
produces 100 μA with 2 V compliance at a 5 V supply. The load
current is the sum of ISET and IGND. IGND increases slightly with
load; a RSET of 13.6 kΩ yields 100 μA of load current.
U1
5V
0.1µF
V+
ADR280
V–
2.5V
1.2V + V–
0.1µF
V
OUT
5V
V+
ADR280
V–
Figure 13. Floating References
I
SET
The ADR280 provides the core 1.2 V band gap voltage and is
able to drive a maximum load of only 100 μA. Users can simply
buffer the output for high current or sink/source current applica-
V
OUT
C1
0.1µF
+
–
R
SET
1.2V
13.6kΩ
tions, such as ADC or LCD driver references (see Figure 14).
RL
1kΩ
I
L
100µA
I
GND
+ I
U1
I
= I
L
SET
GND
V+
Figure 16. Low Cost Current Source
0.1µF
ADR280
Precision Low Power Current Source
V–
By adding a buffer to redirect the IGND in Figure 17, a current
can be precisely set by RSET with the equation IL = 1.2 V/RSET
.
V
U2
OUT
V
OUT
U1
0.1µF
U2 = AD8541, SC70
AD8601, SOT-23-5
5V
V+
ADR280
Figure 14. Buffered Output
V–
Users can also tailor any specific need for voltage and dynamics
with an external op amp and discrete components (see Figure 14
and Figure 15). Depending on the specific op amp and PCB
layout, it may be necessary to add a compensation capacitor, C2,
to prevent gain peaking and oscillation. The exact value of C2
needed requires some trial and error but usually falls in the
range of a few picofarads.
V
OUT
C2
0.1µF
5V
U2
R
12kΩ
SET
–
V+
AD8541
V–
+
RL
I
L
1kΩ
100µA
I
= 1.2V/R
SET
L
Figure 17. Precision Low Power Current Source
Rev. C | Page 8 of 12
ADR280
Boosted Current Source
100 mA load is achievable at a 5 V supply. The higher the
supply voltage, the lower the current handling is because of the
heat generated on the MOSFET. For heavy capacitive loads,
additional buffering is needed at the output to enhance the
transient response.
Adding one more buffer to the previous circuit boosts the
current to the level that is limited only by the buffer U2 current
handling capability (see Figure 18).
U1
U1
5V
5V
V+
2.5V/100mA
V
V+
O
ADR280
RL
ADR280
25Ω
V–
M1*
U2
V–
5V
+
–
U2
V
REF
1.2V
V
OUT
V+
V–
+
V
R2
OUT
V+
C2
1pF
C1
10.8kΩ ± 0.1%
AD8541
0.1µF
C1
0.1µF
V–
–
5V
U3
+
1.2V
–
R
230Ω
SET
–
V+
R1
*M1 = FDB301N, 2N7000, 2N7002, OR EQUIVALENT.
V–
+
10kΩ ± 0.1%
RL
500Ω
I
L
5mA
Figure 20. 2.5 V Boosted Reference
I
= 1.2V/R
SET
L
U2 = U3 = AD8542, AD822
GSM and 3G Mobile Station Applications
Figure 18. Precision Current Source
The ADR280 voltage reference is ideal for use with analog
baseband ICs in GSM and 3G mobile station applications.
Figure 21 illustrates the use of the ADR280 with the AD6535
GSM analog baseband. The AD6535 provides all of the data
converters and power management functions needed to
implement a GSM mobile station, including baseband codecs,
audio codecs, voltage regulators, and a battery charger. Besides
low current consumption and a small footprint, the ADR280 is
optimized for excellent PSRR, which is necessary for optimum
AD6535 device performance when the main battery voltage
fluctuates during RF power amplifier activity.
Negative Reference
A negative reference can be precisely configured without using
any expensive tight tolerance resistors, as shown in Figure 19.
The voltage difference between VOUT and V− is 1.2 V. Since VOUT
is at virtual ground, U2 closes the loop by forcing the V− pin to
be the negative reference output.
U1
+5V
V+
ADR280
V–
–V
–1.2V
REF
DIGITAL
BASEBAND
RADIO
AD6535
ANALOG BASEBAND
V
OUT
BASEBAND CODEC
AUDIO CODEC
C1
0.1µF
U2
–
V+
AD8541
V–
+
POWER
MANAGEMENT
–2.7V
Figure 19. Negative Reference
Boosted Reference with Scalable Output
ADR280
A precision user defined output with boosted current capability
can be implemented with the circuit shown in Figure 20. In this
circuit, U2 forces VO to be equal to VREF × (1 + R2/R1) by regu-
lating the turn-on of M1; the load current is therefore furnished
by the 5 V supply. For higher output voltage, U2 must be changed
and the supply voltage of M1 and U2 must also be elevated and
separated from the U1 input voltage. In this configuration, a
VOLTAGE REFERENCE
Figure 21. GSM Mobile Station Application
Rev. C | Page 9 of 12
ADR280
OUTLINE DIMENSIONS
3.04
2.90
2.80
1.40
1.30
1.20
3
2.64
2.10
1
2
PIN 1
0.95 BSC
1.90 BSC
1.12
0.89
0.20
0.08
0.10
0.01
0.60
0.50
0.40
0.50
0.30
SEATING
PLANE
COMPLIANT TO JEDEC STANDARDS TO-236-AB
Figure 22. 3-Lead Small Outline Transistor Package [SOT-23-3]
(RT-3)
Dimensions shown in millimeters
7” REEL 100.00
4.10
4.00
3.90
1.10
1.00
0.90
OR
14.40 MIN
13” REEL 330.00
1.55
1.50
1.45
1.10
1.00
0.90
2.05
2.00
1.95
0.35
0.30
0.25
1.50 MIN
7” REEL 50.00 MIN
2.80
2.70
2.60
13.20
13.00
12.80
OR
20.20
MIN
8.30
8.00
7.70
13” REEL 100.00 MIN
3.55
3.50
3.45
0.75 MIN
3.20
3.10
2.90
1.00 MIN
9.90
8.40
6.90
DIRECTION OF UNREELING
Figure 23. Tape and Reel Dimensions
(RT-3)
Dimensions shown in millimeters
2.20
2.00
1.80
1.35
1.25
1.15
2.40
2.10
3
1.80
1
2
PIN 1
0.65 BSC
0.40
0.10
1.00
0.80
1.10
0.80
0.30
0.20
0.10
0.26
0.10
0.40
0.25
0.10 MAX
SEATING
PLANE
0.10 COPLANARITY
ALL DIMENSIONS COMPLIANT WITH EIAJ SC70
Figure 24. 3-Lead Thin Shrink Small Outline Transistor Package [SC70]
(KS-3)
Dimensions shown in millimeters
Rev. C | Page 10 of 12
ADR280
ORDERING GUIDE
Temperature
Range
Package
Description
Package
Option
Model
Branding Output Voltage (V) Ordering Quantity
ADR280AKS-R2
ADR280AKS-REEL
ADR280AKS-REEL7
ADR280AKSZ-R21
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
3-Lead SC70
3-Lead SC70
3-Lead SC70
3-Lead SC70
3-Lead SC70
3-Lead SOT-23
3-Lead SOT-23
3-Lead SOT-23
3-Lead SOT-23
3-Lead SOT-23
KS-3
KS-3
KS-3
KS-3
KS-3
RT-3
RT-3
RT-3
RT-3
RT-3
RBA
RBA
RBA
L25
L25
RBA
RBA
RBA
L25
L25
1.200
1.200
1.200
1.200
1.200
1.200
1.200
1.200
1.200
1.200
250
10,000
3,000
250
3,000
250
10,000
3,000
250
ADR280AKSZ-REEL71 −40°C to +85°C
ADR280ART-R2
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
ADR280ART-REEL
ADR280ART-REEL7
ADR280ARTZ-R21
ADR280ARTZ-REEL71 −40°C to +85°C
3,000
1
Z = RoHS Compliant Part.
Rev. C | Page 11 of 12
ADR280
NOTES
©2002–2007 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
C03065-0-4/07(C)
Rev. C | Page 12 of 12
相关型号：
©2020 ICPDF网 联系我们和版权申明