EV-ADUCRF101QS1Z [ADI]

EVAL BOARD FOR ADUCRF101;


型号：	EV-ADUCRF101QS1Z
厂家：	ADI
描述：	EVAL BOARD FOR ADUCRF101
文件：	总12页 (文件大小：453K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Evaluation Board User Guide

EV-ADuCRF101

One Technology Way • P. O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com

ADuCRF101 Evaluation Board User Guide

FEATURES

EVALUATION BOARD OVERVIEW

4-layer PCB (33 mm × 55 mm form factor)

2 power supply options

2.2 V to 3.6 V from an external power supply

5 V from interface/emulator board

The ADuCRF101 mini board allows a user to program, debug,

and evaluate the performance of the ADuCRF101. Its small

form factor makes it the ideal hardware for evaluation of large

wireless sensor networks.

Power indicator/general-purpose LEDs

Reset and download push buttons

8-pin connector to the interface/emulator board or to

RS-232 interface cable (top row)

Access to ADuCRF101 pins on the two footprints for through-

hole connectors on the edge of the board

32.768 kHz watch crystal footprint

Matching network and SMA connector for wireless

communication

Six kits are available, from a mini board only, to a combination

of emulator and boards.

•

EV-ADuCRF101MK3Z mini board for 433 MHz operation

EV-ADuCRF101MK1Z mini board for 868 MHz/915 MHz

operation

•

EV-ADuCRF101QSP1Z QuickStart Plus for 868 MHz/915

MHz operation

EV-ADuCRF101QSP3Z QuickStart Plus for 433 MHz

operation

EV-ADuCRF101QS1Z QuickStart for 868 MHz/915 MHz

operation

EV-ADuCRF101QS3Z QuickStart for 433 MHz operation

EVALUATION KIT CONTENTS

A DVD containing evaluation software, user guides,

data sheets, and example code

Antenna

Figure 1 shows the content of a quick start kit, one mini board

with antenna and one emulator.

Emulator board (QuickStart and QuickStart Plus kits only)

GENERAL DESCRIPTION

The ADuCRF101 is a fully integrated, data acquisition solution

designed for low power wireless applications. It features a 12-bit

ADC, a low power ARM Cortex™-M3 processor, a 431 MHz

to 464 MHz and 862 MHz to 928 MHz RF transceiver, and

Flash/EE memory, in a 9 mm × 9 mm LFCSP package.

Figure 1 ADuCRF101 Mini Board and Emulator Board

PLEASE SEE THE LAST PAGE FOR AN IMPORTANT

WARNING AND LEGAL TERMS AND CONDITIONS.

Rev. 0 | Page 1 of 12

EV-ADuCRF101

Evaluation Board User Guide

TABLE OF CONTENTS

Features .............................................................................................. 1

Evaluation Kit Contents................................................................... 1

General Description ......................................................................... 1

Evaluation Board Overview ............................................................ 1

Revision History ............................................................................... 2

Development Systems Description ................................................ 3

Mini Kit.......................................................................................... 3

QuickStart Kit ............................................................................... 3

QuickStart Plus Kit....................................................................... 3

J-Link OB Emulator ..................................................................... 3

Mini Board Features......................................................................... 4

Power Supply................................................................................. 4

Power Indicator/General-Purpose LEDs...................................4

Crystal Circuits..............................................................................4

Emulator Interface ........................................................................4

Reset/Download Push Buttons....................................................4

RS-232 Interface ............................................................................4

RF Matching Network ..................................................................5

Sensitivity Measurements.............................................................5

Mini Board Connectors....................................................................6

Edge Connectors J1 and J2...........................................................6

Emulation and Serial Interface Connector J3............................6

Mini Board Schematic And Artwork..............................................7

Bill of Materials............................................................................... 11

REVISION HISTORY

5/13—Revision 0: Initial Version

Rev. 0 | Page 2 of 12

Evaluation Board User Guide

EV-ADuCRF101

DEVELOPMENT SYSTEMS DESCRIPTION

Different systems are available that are optimized for the

various types of evaluation requirements.

J-LINK OB EMULATOR

The J-Link OB emulator board provides a debug path via serial

wire, supply, and UART communication with the ADuCRF101

mini board. Figure 2 shows a top view of the emulator board.

The J2 connector plugs into the ADuCRF101 mini board. The

J2 connector pinout is shown in Figure 3.

Table 1 lists the contents available for each type of system.

Table 1. Development Systems Content

Mini Kit

(MK)

QuickStart QuickStart Plus

Content

(QS)

(QSP)

Mini Board

Antenna

Emulator Board

Battery Holder

DVD

The mini board is optimized for 433 MHz or 868MHz/915MHz

operation.

Table 2 lists the models and their optimized communication

frequency.

Table 2. Development Systems Models

Model

Description

Frequency

EV-ADuCRF101MK1Z

EV-ADuCRF101MK3Z

EV-ADuCRF101QS1Z

EV-ADuCRF101QS3Z

EV-ADuCRF101QSP1Z

EV-ADuCRF101QSP3Z

Mini kit

QuickStart

QuickStart Plus

868 MHz/915 MHz

433 MHz

868 MHz/915 MHz

433 MHz

868 MHz/915 MHz

433 MHz

Figure 2. Emulator, Top View

MINI KIT

The mini kit evaluation kits contain one mini board, one

antenna, and a DVD containing software and documentation.

This system can be ordered, in addition to the other develop-

ment systems, to increase the number of nodes in a wireless

sensor network.

The mini kit does not contain an emulator.

QUICKSTART KIT

The QuickStart kit evaluation kits contain one mini board,

one antenna, one emulator board, and a DVD containing

software and documentation.. This kit is ideal to evaluate the

ADuCRF101 as part of an existing wireless system.

QUICKSTART PLUS KIT

Figure 3. J2 Connector

The QuickStart Plus evaluation kit contain two mini boards,

two antennas, one emulator board, a battery holder, and a DVD

containing software and documentation. The QuickStart Plus

kit has all the components needed to quickly set up a two-node

wireless communication system.

For downloading and debugging, LK1, LK2, LK4, and LK6

must be inserted. LK3 and LK5 are required to communicate

via UART.

When measuring current consumption using an external supply

on the ADuCRF101 mini board IOVDD pins, it is recommended

that the emulator be disconnected.

Rev. 0 | Page 3 of 12

EV-ADuCRF101

Evaluation Board User Guide

MINI BOARD FEATURES

Other emulators supporting serial wire debug (for example, JLINK

Version 6 and higher) can be used. The connections between

the mini board and the 20-pin JTAG connector are listed in

Table 3.

POWER SUPPLY

Two options are available for powering the board.

•

Use the emulator board.

The 5 V USB supply on J3.7 is regulated via the linear

voltage regulator, U2. The 3.3 V regulator output powers

the red power LED, D2. When LK1 is in place, the regulator

output is connected back to the emulator board on J3.8.

The regulator powers the ADuCRF101 only when LK1 and

LK2 are in place on the mini board.

Apply an external power supply to IOVDD on J1.3.

To measure the ADuCRF101 current consumption only,

apply the supply directly to IOVDD. Remove LK1 and LK2,

and disconnect the emulator board.

Table 3. Mini Board/Emulator Connections

J3 Connector

Signal (Mini Board)

20-Pin JTAG Connector (Emulator)

GND

J3.2

Pin 4, Pin 6, Pin 8, Pin 10, Pin 12,

Pin 14, Pin 16, Pin 18, Pin 20

VDD

SWDIO J3.3

SWCLK J3.5

J3.8

Pin 1 and Pin 2

Pin 7

Pin 9

•

RESET

J3.1

Pin 15

Note that the internal pull-ups on SWDIO and SWCLK are

sufficient, and no external resistors are required.

It is also possible to power the device from an external

supply at 3.3 V while debugging with the emulator board.

Remove LK1 and insert LK2.

RESET/DOWNLOAD PUSH BUTTONS

A reset push button is available to allow the user to reset the part

manually. When pressed, the reset pin of the ADuCRF101 is pulled

RESET

Each device supply pin of the ADuCRF101 is decoupled with

0.1 µF and 100 pF capacitors. A 68 µF capacitor is used on the

supply line for the transceiver.

to ground. Because the

pin on the ADuCRF101 is Schmidt-

triggered internally, there is no need to use an external Schmidt

trigger on this pin. A second push button, BOOT, is connected to

P0.6/IRQ2 and facilitates serial download mode entry.

POWER INDICATOR/GENERAL-PURPOSE LEDS

A power LED (D2) is used to indicate that the interface board

is providing the supply to the board. Note that LK1 and LK2

must be inserted for the ADuCRF101 to be powered from the

emulator board. A general-purpose LED (D1) is connected to

P4.2 of the ADuCRF101. When P4.2 is cleared, the LED is

turned on. When P4.2 is set, the LED is turned off.

RS-232 INTERFACE

To interface the ADuCRF101 UART pins to a PC, the USB UART

interface on the emulator board is the first option to consider.

The ADuCRF101 P1.0 and P1.1 lines are available on the top

row of the J3 connector and can be directly connected to EVAL-

ADUC-CABLE1Z, as shown in Figure 4, or similar adaptor that

includes an RS-232 interface device providing the required level

shifting or a USB UART interface. Supply should be provided

on J1.3 (IOVDD) and LK2 inserted when using an RS-232

interface.

CRYSTAL CIRCUITS

Footprints for a through-hole 32.768 kHz watch crystal (Y2)

and its two capacitors are included on the board. This crystal can

be selected by software as the clock source of the wake-up timer.

EMULATOR INTERFACE

Nonintrusive emulation and download are possible on the

ADuCRF101 via serial wire by connecting the emulator board

to the J3 connector. Only two signals are required for debug

purposes: SWDIO and SWCLK. The reset signal is also connected

and can be used to provide a reset from the PC, if required.

To communicate via UART using a UART cable, EVAL-ADUC-

CABLE1Z, the supply should be between 3 V and 3.6 V because

the cable is operational only in this supply range. The EVAL-

ADUC-CABLE1Z is available for purchase on the Analog

Devices, Inc. web site.

Figure 4. Mini Board Connected to EVAL-ADUC-CABLE1Z

Rev. 0 | Page 4 of 12

Evaluation Board User Guide

EV-ADuCRF101

The list of components for the different models available is

available in Table 8 to Table 12.

RF MATCHING NETWORK

An RF matching network is available to match the LNA input

impedance and PA output with the 50 Ω SMA connector (J4)

for ADuCRF101 at different frequencies depending on the

board used.

The 868 MHz/915 MHz models come with a matching network

for differential PA only. The matching network components can

be modified to evaluate the single-ended PA. The list of compo-

nents for single-ended PA operating at 868 MHz/915 MHz is

available in Table 13.

Different boards are available based on the RF transceiver

frequency required. See Table 4 for the relevant model numbers.

The 433 MHz models come preloaded with a combined matching

network for both differential and single ended PA operation.

Table 4. ADuCRF101 Development Systems Optimized

Communication Frequency

SENSITIVITY MEASUREMENTS

Frequency

Topology

Models

To perform the BER test on the RF transceiver, the internal

clock and data signals of the transceiver can be brought to the

ADuCRF101 GPIO pins

868 MHz/915 MHz Differential PA

EV-ADuCRF101MK1Z

EV-ADuCRF101QS1Z

EV-ADuCRF101QSP1Z

EV-ADuCRF101MK3Z

EV-ADuCRF101QS3Z

EV-ADuCRF101QSP3Z

433 MHz

Differential and

single-ended PA

•

The CLOCK signal can be brought out to P0.6.

The DATA signal can be brought out to P2.6.

Rev. 0 | Page 5 of 12

EV-ADuCRF101

Evaluation Board User Guide

MINI BOARD CONNECTORS

EDGE CONNECTORS J1 AND J2

Table 6. Pin Functions for Edge Connector J2

Pin No.

Pin Function

ADC0

ADC1

ADC2

ADC3

ADC4

ADC5

VREF

LVDD1

GND

P0.7

P0.6

P0.5

P0.4

P0.3

P0.2

P0.1

P0.0

ADuCRF101 signals, such as GPIOs and analog inputs are

available on the edge of the board, on two unpopulated

through-hole connectors. These two connectors can be used

to plug the mini board into a prototype board.

J2-1

J2-2

J2-3

J2-4

J2-5

J2-6

J2-7

J2-8

The pinout of the two edge connectors is shown in Table 5 and

in Table 6.

Table 5. Pin Functions for Edge Connector J1

Pin Number

Pin Function

5VOUT

VDDOUT

IOVDD

GND

RESET

J2-9

J1-1

J1-2

J1-3

J1-4

J1-5

J1-6

J2-10

J2-11

J2-12

J2-13

J2-14

J2-15

J2-16

J2-17

J2-18

J2-19

J1-7

P1.5

J1-8

P1.4

J1-9

P1.3

P2.6

P2.4

J1-10

J1-11

J1-12

J1-13

J1-14

J1-15

J1-16

J1-17

J1-18

J1-19

J1-20

J1-21

J1-22

J1-23

J1-24

P1.2

P1.1

P1.0

P4.0

P4.1

P4.2

P4.3

P4.4

P4.5

P4.6

P4.7

P3.2

P3.3

P3.4

P3.5

EMULATION AND SERIAL INTERFACE CONNECTOR J3

Connector J3 provides a connection with the emulation board.

The pinout for the J3 connector is described in Table 7.

Table 7. Pin Functions for Edge Connector J3

Pin No.

J3-1

J3-2

J3-3

J3-4

J3-5

J3-6

J3-7

J3-8

Pin Function

RESET

GND

SWDIO

SWCLK

5VUSB

VDDOUT

Rev. 0 | Page 6 of 12

Evaluation Board User Guide

EV-ADuCRF101

MINI BOARD SCHEMATIC AND ARTWORK

0 0 5

Figure 5. ADuCRF101

Rev. 0 | Page 7 of 12

EV-ADuCRF101

Evaluation Board User Guide

0 0 6

Figure 6. Connectors

Rev. 0 | Page 8 of 12

Evaluation Board User Guide

EV-ADuCRF101

0 0 7

Figure 7. Matching Network Section

Rev. 0 | Page 9 of 12

EV-ADuCRF101

Evaluation Board User Guide

Figure 8. Top Side Silkscreen

Figure 9. Bottom Side Silkscreen

Rev. 0 | Page 10 of 12

Evaluation Board User Guide

EV-ADuCRF101

BILL OF MATERIALS

Table 8.

Qty Component

Description

Order No.

Supplier

EV-ADuCRF101MKxZ, Rev. E PCB Two-sided surface mount PSB-1

Analog Devices

Farnell

Precision analog microcontroller with RF transceiver ADuCRF101BCPZ128

Low quiescent current, 3.3 V linear regulator

SMD push button switch

ADP121-AUJZ33R7

B3U-1000P

LGQ971

Boot, Reset

LED, SMD, green

Digi-Key

LED, 0603, red

LSQ976-Z

Farnell

C1, C2, C39

0.47 µF capacitor, 16 V, Y5V, ceramic 0402

150 nF capacitor, 10%, 10 V, 0402

GRM155F51C474ZA01D

GRM155R61A154KE19D

LMK105BJ224KV-F

GRM1555C1H101JD01D

GRM1555C1H150JZ01D

GRM155R71C104KA88D

C0402C105K9PACTU

GRM188R60J106ME47D

Not inserted

Digi-Key

Farnell

C8, C11, C12, C14, C16, C17, C27 220 nF ceramic capacitor, 10 V, X5R

C18, C30, C31, C35, C36

100 pF capacitor, 5%, 50 V, 0402

15 pF capacitor, 50 V, 5%, C0G, 0402

0.1 µF ceramic capacitor, 16 V, X7R, 0402

1 µF capacitor, 10%, 6.3 V, X5R, 0402

10 µF ceramic capacitor, 6.3 V, 20%, X5R, 0603

Not inserted

C19, C29

Digi-Key

Not inserted

Digi-Key

Farnell

C21, C22, C24, C26, C34

C15,C23, C25

C28

C32, C33

C38

68 µF tantalum capacitor, 6.3 V, 20%, 1210

10 nF ceramic capacitor, 6.3 V, 10%, X7R, 0402

Not inserted

TCJB686M006R0070

1758885

C43, C44, C45, C46, C47, C48

J1, J2

Not inserted

Farnell

8-pin R/A header

9-103324-0

Conn jack end launch PC gold SMA

Ferrite bead, 600 Ω at 100 MHz

2-pin (0.1" pitch) header and shorting shunt

36k Ω resistor, 1/16W, 1%, 0402 SMD

470 Ω resistor, 1/16W, 1% 0402 SMD

1.6 Ω resistor, 1/10W, 5% 0603 SMD

33 Ω resistor, 1/16W, 1% 0402 SMD

Crystal 26 MHz, 10 pF, 3.2 X 2.5 SMD

142-0701-851

Digi-Key

Farnell

BLM18BD102SN1D

M20-9990246

LK1, LK2

RC0402FR-0736KL

MCR01MZPF4700

RC0603JR-071R6L

RHM33CECT-ND

Digi-Key

R3, R4

R6, R7, R8, R9, R10, R11

NX3225SA-

26.000000MHZ-G2

32 kHz crystal

Not inserted

VW Badland

Digi-Key

Antenna

433 MHz range antenna

868 MHz/915 MHz range antenna

SMAMFDRA433

ANT-916-CW-HWR-SMA

Table 9. Matching Network Bill of Material for MK1 Model (868 MHz/915 MHz Operation, Differential PA)

Qty Component

Description

Order No.

Supplier

Not inserted

Digi-Key

C3, C7, C13, C42

C9, C10

Not inserted

2.7 pF ceramic capacitor, 50 V, C0G, 0402

100 pF capacitor, 5%, 50 V, 0402

Not inserted

GRM1555C1H2R7CZ01D

GRM1555C1H101JD01D

Not inserted

C20

Farnell

L2, L6, L8

L3, L4

Not inserted

Coilcraft

10.4 nH RF inductor, ceramic core, 5% 0603

0604HQ-10NXJL

Table 10. Harmonic Filter Bill of Material for MK1 Model (868 MHz/915 MHz Operation, Differential PA)

Qty Component

Description

Order No.

Supplier

Digi-Key

Not inserted

Coilcraft

270 pF ceramic capacitor, 50 V 5% C0G, 0402

3.6 pF ceramic capacitor, 50 V C0G, 0402

Not inserted

GRM1555C1H271JA01D

GJM1555C1H3R6CB01D

Not inserted

C6, C37

C40, C41

15 nH RF inductor, ceramic core, 5% 0603

7.5 nH RF inductor, ceramic core, 5% 0603

0603HP-15NXJL

0603HP-7N5XJL

L7, L9

Rev. 0 | Page 11 of 12

EV-ADuCRF101

Evaluation Board User Guide

Table 11. Matching Network Bill of Material for MK3 Model (433 MHz Operation)

Qty

Component

C9, C10

C13, C20

C7, C42

Description

Order No.

Supplier

Digi-Key

Not inserted

Coilcraft

270 pF capacitor, 5%, 50 V 0402

5.6 pF ceramic capacitor, 50 V, C0G, 0402

100 pF capacitor, 5%, 50 V, 0402

Not inserted

100 nH 0603 inductor

Not inserted

GRM1555C1H271JA01D

GRM1555C1H5R6DZ01D

GRM1555C1H101JD01D

Not inserted

0603HP-R10XJL

Not inserted

Coilcraft

15 nH 0603 inductor

0603HP-15NXJL

L3, L4

27 nH 0603 inductor

0603HP-27NXJL

Coilcraft

Table 12. Harmonic Filter Bill of Material for MK3 Model (433 MHz Operation)

Qty

Component

Description

Order No.

Supplier

Digi-Key

Not inserted

Coilcraft

270 pF ceramic capacitor, 50 V, 5%, C0G 0402

8.2 pF cerami capacitor, 50 V, C0G 0402

Not inserted

GRM1555C1H271JA01D

GJM1555C1H8R2DB01D

Not inserted

C6, C37

C40, C41

30 nH 0603 inductor

0603HP-30NXJL

0603HP-18NXJL

L7, L9

18 nH 0603 inductor

Table 13. Matching Network Bill of Material for Single-Ended PA Topology at 868 MHz/915 MHz Operation

Qty

Component

Description

Order No.

Supplier

Digi-Key

Not inserted

Digi-Key

Coilcraft

150 pF ceramic capacitor, 50V 5% NP0 0402

1.5 pF ceramic capacitor, 50 V, C0G 0402

100 pF capacitor, 5%, 50 V 0402

Not inserted

GCM1555C1H151JA16D

GJM1555C1H1R5CB01

GRM1555C1H101JD01D

Not inserted

C9, C10

C13

C7, C42

C20

100 pF capacitor, 5%, 50 V 0402

47 nH 0603 inductor

GRM1555C1H101JD01D

0603HP-47NXJL

Not inserted

Coilcraft

1.8 nH 0603 inductor

0603HP-1N8XJL

L3, L4

10 nH 0603 inductor

0604HQ-10NXJL

Coilcraft

ESD Caution

ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection

circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.

Legal Terms and Conditions

By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions

set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you

have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc.

(“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal,

temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided

for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional

limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term

“Third Party” includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including

ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may

not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to

promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any

occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board.

Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written

notice to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO

WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED,

RELATED TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF

INTELLECTUAL PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S

POSSESSION OR USE OF THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES

SHALL BE LIMITED TO THE AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will

comply with all applicable United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the

Commonwealth of Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and

Customer hereby submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is

expressly disclaimed.

registered trademarks are the property of their respective owners.

UG11040-0-5/13(0)

Rev. 0 | Page 12 of 12

EV-ADUCRF101QS1Z [ADI]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB