HMC1161LP5E [ADI]
Dual output frequency range;型号: | HMC1161LP5E |
厂家: | ADI |
描述: | Dual output frequency range |
文件: | 总12页 (文件大小:327K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
8.71 GHz to 9.55 GHz MMIC VCO with Half
Frequency Output
Data Sheet
HMC1161
FEATURES
FUNCTIONAL BLOCK DIAGRAM
Dual output frequency range
fOUT = 8.71 GHz to 9.55 GHz
fOUT/2 = 4.355 GHz to 4.775 GHz
Output power (POUT): 11 dBm
Single-sideband (SSB) phase noise: −115 dBc/Hz at 100 kHz
No external resonator needed
HMC1161
NC
NC
NC
1
2
3
4
5
6
7
8
24 NC
23 NC
22
21
20
19
NC
V
NC
NC
GND
NC
NC
NC
CC
RoHS-compliant, 5 mm × 5 mm, 32-lead LFCSP: 25 mm²
RFOUT
18 NC
17 NC
APPLICATIONS
Point to point and multipoint radios
Test equipment and industrial controls
Very small aperture terminals (VSATs)
Figure 1.
GENERAL DESCRIPTION
The HMC1161 is a monolithic microwave integrated circuit
(MMIC), voltage controlled oscillator (VCO) that integrates a
resonator, a negative resistance device, and a varactor diode,
and features a half frequency output.
Because of the monolithic construction of the oscillator, the
output power and phase noise performance are excellent over
temperature.
The output power is 11 dBm typical from a 5 V supply voltage.
The VCO is housed in a RoHS-compliant LFCSP and requires
no external matching components.
Rev. B
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Technical Support
©2015 Analog Devices, Inc. All rights reserved.
www.analog.com
HMC1161* Product Page Quick Links
Last Content Update: 11/01/2016
Comparable Parts
Design Resources
View a parametric search of comparable parts
• HMC1161 Material Declaration
• PCN-PDN Information
• Quality And Reliability
• Symbols and Footprints
Evaluation Kits
• HMC1161 Evaluation Board
Documentation
Data Sheet
Discussions
View all HMC1161 EngineerZone Discussions
• HMC1161: 8.71 GHz to 9.55 GHz MMIC VCO with Half
Frequency Output Data Sheet
Sample and Buy
Visit the product page to see pricing options
Technical Support
Submit a technical question or find your regional support
number
* This page was dynamically generated by Analog Devices, Inc. and inserted into this data sheet. Note: Dynamic changes to
the content on this page does not constitute a change to the revision number of the product data sheet. This content may be
frequently modified.
HMC1161
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Interface Schematics .....................................................................6
Typical Performance Characteristics ..............................................7
Applications Information.................................................................9
Evaluation Printed Circuit Board (PCB)..................................... 10
Bill of Materials........................................................................... 10
Packaging and Ordering Information ......................................... 11
Outline Dimensions................................................................... 11
Ordering Guide .......................................................................... 11
Applications....................................................................................... 1
Functional Block Diagram .............................................................. 1
General Description......................................................................... 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
Absolute Maximum Ratings ....................................................... 4
ESD Caution.................................................................................. 4
Pin Configuration and Function Descriptions............................. 5
REVISION HISTORY
11/15—Rev. A to Rev. B
Changes to Figure 3 and Figure 4................................................... 6
Changes to Ordering Guide, Note 1............................................. 11
8/15—Revision A: Initial Version
This Hittite Microwave Products data sheet has been reformatted
to meet the styles and standards of Analog Devices, Inc.
Rev. B | Page 2 of 11
Data Sheet
HMC1161
SPECIFICATIONS
TA = −40°C to +85°C, VCC = 5 V, unless otherwise noted.
Table 1.
Parameter
FREQUENCY
Range
Min
Typ
Max
Unit
Test Conditions/Comments
Output Frequency (fOUT
Half Output Frequency
(fOUT/2)
)
8.71
4.355
9.55
4.755
GHz
GHz
Drift Rate
Pulling
Pushing
0.75
3.5
2
MHz/°C
MHz p-p
MHz/V
Pulling into a 2.0:1 voltage standing wave ratio (VSWR)
At VTUNE = 5 V
OUTPUT POWER (POUT
)
RFOUT
RFOUT/2
Supply Current (ICC)
8
0
11
4
230
250
270
16
8
dBm
dBm
mA
mA
mA
VCC = 4.75 V
VCC = 5.00 V
VCC = 5.25 V
200
300
HARMONICS, SUBHARMONICS
1/2
3/2
Second
Third
23
40
20
30
dBc
dBc
dBc
dBc
TUNING
Voltage (VTUNE)
Sensitivity
2
50
13
250
10
V
MHz/V
µA
Tune Port Leakage Current
OUTPUT RETURN LOSS
SSB PHASE NOISE
10 kHz Offset
100 kHz Offset
VTUNE = 13 V
2.5
dB
−90
−115
−83
−109
dBc/Hz
dBc/Hz
Rev. B | Page 3 of 11
HMC1161
Data Sheet
ABSOLUTE MAXIMUM RATINGS
Stresses at or above those listed under Absolute Maximum
Table 2.
Parameter
VCC
Ratings may cause permanent damage to the product. This is a
stress rating only; functional operation of the product at these
or any other conditions above those indicated in the operational
section of this specification is not implied. Operation beyond
the maximum operating conditions for extended periods may
affect product reliability.
Rating
5.5 V dc
0 V to 15 V
VTUNE
Temperature
Operating
Storage
Nominal Junction (to Maintain
1 Million Hours Mean Time to
Failure (MTTF))
−40°C to +85°C
−65°C to +150°C
135°C
ESD CAUTION
Nominal Junction (TA = 85°C)
Maximum Reflow Temperature
(MSL3 Rating)
126.7°C
260°C
Thermal Resistance (Junction to
Ground Paddle)
ESD Sensitivity (Human Body Model)
31.4°C/W
Class 1A
Rev. B | Page 4 of 11
Data Sheet
HMC1161
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
NC
NC
NC
1
2
3
4
5
6
7
8
24 NC
23 NC
22
21
20
19
NC
V
NC
HMC1161
TOP VIEW
(Not to Scale)
NC
GND
NC
NC
NC
CC
RFOUT
18 NC
17 NC
NOTES
1. NC = NO CONNECT. HOWEVER, THESE PINS CAN BE
CONNECTED TO RF/DC GROUND WITHOUT AFFECTING THE
PERFORMANCE OF THE DEVICE.
2. EXPOSED PAD. THE PACKAGE BOTTOM HAS AN EXPOSED
METAL PAD THAT MUST BE CONNECTED TO RF/DC GROUND.
Figure 2. Pin Configuration
Table 3. Pin Function Descriptions
Pin No.
Mnemonic Description
1 to 4, 6 to 10, 13 to 18, 20,
22 to 28, 30 to 32
NC
No Connect. However, these pins can be connected to RF/dc ground without affecting the
performance of the device.
5, 11
12
19
GND
Ground. These pins must be connected to RF/dc ground.
Half Frequency Output. This pin is ac-coupled.
RF Output. This pin is ac-coupled.
RFOUT/2
RFOUT
VCC
21
Supply Voltage (5 V).
29
VTUNE
Control Voltage and Modulation Input. The modulation bandwidth is dependent on the drive
source impedance.
EP
Exposed Pad. The package bottom has an exposed metal pad that must be connected to
RF/dc ground.
Rev. B | Page 5 of 11
HMC1161
Data Sheet
INTERFACE SCHEMATICS
3nH
VTUNE
4pF
43pF
RFOUT/2
Figure 3. RFOUT/2 Interface
Figure 6. VTUNE Interface
RFOUT
GND
Figure 4. RFOUT Interface
Figure 7. GND Interface
V
CC
15pF
Figure 5. VCC Interface
Rev. B | Page 6 of 11
Data Sheet
HMC1161
TYPICAL PERFORMANCE CHARACTERISTICS
10.0
300
290
280
270
260
250
240
230
220
210
200
+85°C
+25°C
–40°C
9.5
9.0
8.5
+85°C
+25°C
–40°C
8.0
7.5
7.0
0
1
2
3
4
5
6
7
8
9
10 11 12 13
0
1
2
3
4
5
6
7
8
9
10 11 12 13
TUNING VOLTAGE (V dc)
TUNING VOLTAGE (V dc)
Figure 8. Output Frequency vs. Tuning Voltage
Figure 11. Supply Current (ICC) vs. Tuning Voltage
16
14
12
10
8
5.00
4.75
4.50
4.25
4.00
3.75
3.50
+85°C
+25°C
–40°C
+85°C
+25°C
–40°C
6
4
2
0
0
1
2
3
4
5
6
7
8
9
10 11 12 13
0
1
2
3
4
5
6
7
8
9
10 11 12 13
TUNING VOLTAGE (V dc)
TUNING VOLTAGE (V dc)
Figure 12. RFOUT/2 Output Frequency vs. Tuning Voltage
Figure 9. Output Power vs. Tuning Voltage
600
500
400
300
200
100
0
10
9
8
7
6
5
4
3
2
1
0
+85°C
+25°C
–40°C
+85°C
+25°C
–40°C
0
1
2
3
4
5
6
7
8
9
10 11 12 13
0
1
2
3
4
5
6
7
8
9
10 11 12 13
TUNING VOLTAGE (V dc)
TUNING VOLTAGE (V dc)
Figure 10. Sensitivity vs. Tuning Voltage
Figure 13. RFOUT/2 Output Power vs. Tuning Voltage
Rev. B | Page 7 of 11
HMC1161
Data Sheet
–70
–50
–60
+85°C
+25°C
–40°C
–75
+85°C
+25°C
–40°C
–80
–70
10kHz
–85
–80
–90
–90
–95
–100
–110
–120
–130
–140
–100
–105
–110
–115
–120
100kHz
0
1
2
3
4
5
6
7
8
9
10 11 12 13
10k
100k
1M
10M
TUNING VOLTAGE (V dc)
OFFSET FREQUENCY (Hz)
Figure 15. SSB Phase Noise vs. Offset Frequency at VTUNE = 5 V
Figure 14. SSB Phase Noise vs. Tuning Voltage
Rev. B | Page 8 of 11
Data Sheet
HMC1161
APPLICATIONS INFORMATION
The HMC1161 serves as the local oscillator (LO) in microwave
synthesizer applications. The primary applications are point-to-
point microwave radios, military, radars, test and measurement,
as well as industrial and medical equipment. The low phase
noise allows higher orders of modulation and offers improved bit
error rates in communication systems, whereas the linear,
monotonic tuning sensitivity allows a stable loop filter design. The
higher output power minimizes the gain required to drive
subsequent stages. The half frequency output reduces the input
frequency to the prescaler without the addition of residual
phase noise to the input of the phase-locked loop synthesizer.
LOOP
FILTER
SCK
SDI
SEN
CP
HOST
REF
SYNTH
RFOUT
VTUNE
RFOUT/2
XREFP
VCO INPUT
Figure 16. Typical Application Diagram
Rev. B | Page 9 of 11
HMC1161
Data Sheet
EVALUATION PRINTED CIRCUIT BOARD (PCB)
Figure 17. Evaluation PCB
The circuit board used in an application uses RF circuit design
techniques. Ensure that the signal lines have 50 Ω impedance
and that the package ground leads and backside ground paddle
are connected directly to the ground plane.
BILL OF MATERIALS
Table 4. Bill of Materials for the EV1HMC1161LP5
Item
J1 to J4
J5, J6
C1 to C3
C4
C5 to C7
C8
U1
PCB1
Description
PCB mount SMA RF connectors
2 mm dc headers
Use a sufficient number of via holes to connect the top and
bottom ground planes. The evaluation circuit board shown in
Figure 17 is available from Analog Devices, Inc., upon request.
100 pF capacitors, 0402 package
1000 pF capacitor, 0402 package
2.2 μF tantalum capacitors
0.01 μF capacitor, 0603 package
HMC1161 VCO
110225 evaluation board2
1 Circuit board material is Rogers 4350.
2 Reference this number when ordering the complete evaluation PCB.
Rev. B | Page 10 of 11
Data Sheet
HMC1161
PACKAGING AND ORDERING INFORMATION
OUTLINE DIMENSIONS
5.10
5.00 SQ
4.90
0.30
0.25
0.18
PIN 1
PIN 1
INDICATOR
INDICATOR
25
32
24
1
0.50
BSC
3.80
3.65 SQ
3.50
EXPOSED
PAD
17
8
16
9
0.45
0.40
0.35
0.20 MIN
TOP VIEW
BOTTOM VIEW
3.50 REF
1.00
0.90
0.80
FOR PROPER CONNECTION OF
THE EXPOSED PAD, REFER TO
THE PIN CONFIGURATION AND
FUNCTION DESCRIPTIONS
0.05 MAX
0.02 NOM
COPLANARITY
0.08
SECTION OF THIS DATA SHEET.
SEATING
PLANE
0.20 REF
COMPLIANT TO JEDEC STANDARDS MO-220-VHHD-4.
Figure 18. 32-Lead Lead Frame Chip Scale Package [LFCSP_VQ]
5 mm × 5 mm Body, Very Thin Quad
(HCP-32-1)
Dimensions shown in millimeters
ORDERING GUIDE
Model1
Temperature Range MSL Rating2 Package Description
Package Option Qty. Branding3
HMC1161LP5E
−40°C to +85°C
MSL3
32-Lead LFCSP_VQ
HCP-32-1
H1161
XXXX
H1161
XXXX
HMC1161LP5ETR −40°C to +85°C
EV1HMC1161LP5
MSL3
32-Lead LFCSP_VQ, 7”Tape and Reel
Evaluation Board
HCP-32-1
500
1 The HMC1161LP5E and HMC1161LP5ETR are RoHS compliant parts.
2 See the Absolute Maximum Ratings section, Table 2.
3 XXXX is a placeholder for the 4-digit lot number.
©2015 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D13382-0-11/15(B)
www.analog.com/HMC1161
Rev. B | Page 11 of 11
相关型号:
©2020 ICPDF网 联系我们和版权申明