HMC427LP3ETR [ADI]
Transfer Switch SMT, DC - 8 GHz;
| 型号： | HMC427LP3ETR |
| 厂家： | 
ADI |
| 描述： | Transfer Switch SMT, DC - 8 GHz |
| 文件： | 总6页 (文件大小：655K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HMC427LP3 / 427LP3E
v07.0805
GaAs MMIC POSITIVE CONTROL
TRANSFER SWITCH, DC* - 8 GHz
Typical Applications
Features
High Isolation: 40 ~ 45 dB thru 6 GHz
Low Insertion Loss: 1.2 dB@ 6 GHz
Non-Reflective Design
The HMC427LP3 / HMC427LP3E is ideal for:
• Test Instrumentation
• Fiber Optics & Broadband Telecom
• Basestation Infrastructure
3 x 3 mm SMT Package
• Microwave Radio & VSAT
• Military Radios, Radar, & ECM
Functional Diagram
General Descripn
The HM427LP3 & HMC47LP3E are low loss
broadnd poive control transfer switches in
leadless ce mounpackages. Covering DC to 8
GHz, this sh offs high isolation and low insertion
loss. The swioperates using a positive control
voltage of 0/+5V and requires a fixed bias of +5V @
0 μA.
10
Blocking capacitors are required at ports RF1, 2, 3, &
. Their value will determine the lowest transmission fre-
quency.
ElectricacatiTA = +25° C, With 0/+5V Control, 50 Ohm System
Parameter
Frequency
Min.
Typ.
Max.
Units
DC - 6.0 GHz
DC - 8.0 GHz
1.2
1.6
1.6
2.1
dB
dB
Insertion Lo
Isolation
DC - 1.0 GHz
DC - 2.0 GHz
DC - 6.0 GHz
DC - 8.0 GHz
42
37
33
27
48
42
38
32
dB
dB
dB
dB
DC - 6.0 GHz
DC - 8.0 GHz
17
15
dB
dB
Return Loss
Input Power for 1 dB Compression
1.0 - 8.0 GHz
1.0 - 8.0 GHz
DC - 8.0 GHz
23
37
26
43
dBm
dBm
Input Third Order Intercept
(Two-Tone Input Power= +7 dBm Each Tone, 1 MHz Tone Separation)
Switching Characteristics
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
2
4
ns
ns
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that mayresult fromits use. Specificationssubjecttochangewithout notice. No
10 - 256
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patentrights ofAnalog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC427LP3 / 427LP3E
v07.0805
GaAs MMIC POSITIVE CONTROL
TRANSFER SWITCH, DC* - 8 GHz
Insertion Loss vs. Temperature
Isolation
0
-1
-2
-3
-4
-5
0
-10
RF4 to RF1
RF2 to RF3
RF4 to R
RF1 to
-20
-30
-40
-50
-60
+25 C
+85 C
-40 C
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
6
7
8
9
FREQUENCY (GHz)
FREQUENCGHz)
10
Return Loss
0.1 and 1 Iut Compression Point
0
30
28
2
22
20
18
-5
-10
-15
-20
-25
-30
RF1
RF2
RF3
RF4
16
1 dB Compression Point
0.1 dB Compression Point
14
12
10
0
1
2
3
6
7
9
1
2
3
4
5
6
7
8
9
F
FREQUENCY (GHz)
Input Third Order Intercept Point
50
45
40
35
30
25
20
+25 C
+85 C
-40 C
1
2
3
4
5
6
7
8
9
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that mayresult fromits use. Specificationssubjecttochangewithout notice. No
10 - 257
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patentrights ofAnalog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC427LP3 / 427LP3E
v07.0805
GaAs MMIC POSITIVE CONTROL
TRANSFER SWITCH, DC* - 8 GHz
Absolute Maximum Ratings
Bias Voltage & Current
Bias Voltage Range (Vdd)
Control Voltage Range (A & B)
Channel Temperature
Thermal Resistance
+7.0 Vdc
Vdd Range = +5.0 Vdc 10 %
-0.5V to Vdd +1.0 Vdc
150 °C
Vdd
(Vdc)
Idd (Typ.)
(μA)
Idd (Max.)
(μA)
+5.0
5
10
130 °C/W
Storage Temperature
-65 to +150 °C
-40 to +85 °C
+27 dBm
Control Voltages
Operating Temperature
Maximum Input Power
ESD Sensitivity (HBM)
State
Bias ndition
Class 1A
Low
0.2 Vdc @ 5 μpi
Vdd Vdc @ 5 μA Tpical
High
Truth Tble
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Col Input
Signal Path State
10
RFo
F2
RF1 to
RF3
RF4 to
RF1
RF2 to
RF3
A
Note:
DC blocking capacitors are required at ports RF1, 2, 3, &
4. Their value will determine the lowest transmission fre-
quency.
Low
Hi
Low
On
Off
On
Off
Off
On
Off
On
High
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that mayresult fromits use. Specificationssubjecttochangewithout notice. No
10 - 258
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patentrights ofAnalog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC427LP3 / 427LP3E
v07.0805
GaAs MMIC POSITIVE CONTROL
TRANSFER SWITCH, DC* - 8 GHz
Outline Drawing
10
N
1. LEAME MATERCOPPER ALLOY
2. DIMENS ARINCHES [MILLIMETERS]
AD SPLERANCE IS NON-CUMULATIVE.
BURR LGTH SHALL BE 0.15mm MAXIMUM.
URR HEIGHT SHALL BE 0.05mm MAXIMUM.
AGE WARP SHALL NOT EXCEED 0.05mm.
GROUND LEADS AND GROUND PADDLE MUST BE
LDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Informati
Part Number
ody Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking [3]
427
XXXX
HMC427LP3
ion Molded Plastic
Sn/Pb Solder
427
XXXX
MSL1 [2]
HMC427
compliw Stress Injection Molded Plastic
100% matte Sn
[1] Max peof 235 °C
[2] Max peof 260 °C
[3] 4-Digit lo
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that mayresult fromits use. Specificationssubjecttochangewithout notice. No
10 - 259
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patentrights ofAnalog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC427LP3 / 427LP3E
v07.0805
GaAs MMIC POSITIVE CONTROL
TRANSFER SWITCH, DC* - 8 GHz
Pin Descriptions
Pin Number
Function
Description
This pin is DC coupled and matched to 50 Ohm.
Interface Schematic
RF4, RF1, RF3,
RF2
1, 4, 9, 12
Blocking capacitors are required.
2, 3, 5, 8,
10, 11, 13,
14, 16
This pin should be connected to PCB RF
ground to maximize isolation.
N/C
Package bottom has exposed metal paddle that
must be connected to PCB RF ground.
GND
6
7
CTRLA
CTRLB
See truth table and control voltage table.
See truth table and control volttable.
10
15
VDD
Supply Voltage +5V 10%.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that mayresult fromits use. Specificationssubjecttochangewithout notice. No
10 - 260
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patentrights ofAnalog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC427LP3 / 427LP3E
v07.0805
GaAs MMIC POSITIVE CONTROL
TRANSFER SWITCH, DC* - 8 GHz
Evaluation PCB
10
List of Mor Euation PCB 105672 [1]
The circuit board used in the final application should
be generated with proper RF circuit design tech-
niques. Signal lines at the RF port should have 50
ohm impedance and the package ground leads and
package bottom should be connected directly to the
ground plane similar to that shown above. The eval-
uation circuit board shown above is available from
Hittite Microwave Corporation upon request.
Item
cription
J1 - J4
J5 - J8
C1
B Mount SMA RF Connector
DC Pin
1000 pF Capacitor, 0603 Pkg.
100 pF Capacitor, 0402 Pkg.
100 Ohm Resistor, 0603 Pkg.
C2 - C5
R1 - R2
HMC427LP3 / HMC427LP3E
Transfer Switch
U1
[2]
PCB
105674 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that mayresult fromits use. Specificationssubjecttochangewithout notice. No
10 - 261
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patentrights ofAnalog Devices.
Trademarks and registered trademarks are the property of their respective owners.
相关型号：
HMC430LP4ETR
Voltage Controlled Oscillator, 5000MHz Min, 5500MHz Max, ROHS COMPLIANT, PLASTIC, SMT, 24 PIN
HITTITE
HMC430LP4ETR
Voltage Controlled Oscillator, 5000MHz Min, 5500MHz Max, ROHS COMPLIANT, PLASTIC, SMT, 24 PIN
ADI
©2020 ICPDF网 联系我们和版权申明