HMC432E [ADI]
HMC432E;HMC432 / 432E
v04.0410
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 8 GHz
Typical Applications
Features
Prescaler for DC to C Band PLL Applications:
• UNII, Point-to-Point & VSAT Radios
• 802.11a & HiperLAN WLAN
• Fiber Optic
Ultra Low SSB Phase Noise: -148 dBc/Hz
Single-Ended I/O’s
4
Output Power: -3 to -9 dBm
Single DC Supply: +3V @ 42 mA
9 mm2 Ultra Small Package: SOT26
• Cellular / 3G Infrastructure
General Description
Functional Diagram
The HMC432(E) is a low noise Divide-by-2 Static
Divider utilizing InGaP GaAs HBT technology in
ultra small surface mount SOT26 plastic packages.
This device operates from DC (with a square
wave input) to 8 GHz input frequency with a single
+3V DC supply. Single-ended inputs and outputs
reduce component count and cost. The low additive
SSB phase noise of -148 dBc/Hz at 100 kHz offset
helps the user maintain good system noise
performance.
Electrical Specifications, TA = +25° C, 50 Ohm System, Vcc= +3V
Parameter
Maximum Input Frequency
Minimum Input Frequency
Conditions
Min.
8
Typ.
8.5
Max.
Units
GHz
GHz
Sine Wave Input. [1]
0.2
Fin= 1 to 7 GHz
Fin= 7 to 8 GHz
-12
-4
+12
+10
Input Power Range
Output Power
dBm
Fin= 4 GHz
Fin= 8 GHz
-6
-12
-3
-9
dBm
dBm
Reverse Leakage
RF Output Terminated, Fin= 4 GHz, Pin= 0 dBm
Pin= 0 dBm, Fin= 4 GHz
-30
-148
145
42
dBm
dBc/Hz
ps
SSB Phase Noise (100 kHz offset)
Output Transition Time
Supply Current (Icc)
Pin= 0 dBm, Fout= 882 MHz
Vcc= 3.0 V
56
mA
1. Divider will operate down to DC for square-wave input signal.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
4 - 66
Application Support: Phone: 1-800-ANALOG-D
HMC432* PRODUCT PAGE QUICK LINKS
Last Content Update: 02/23/2017
COMPARABLE PARTS
View a parametric search of comparable parts.
DESIGN RESOURCES
• HMC432 Material Declaration
• PCN-PDN Information
EVALUATION KITS
• HMC432 Evaluation Board
• Quality And Reliability
• Symbols and Footprints
DOCUMENTATION
Data Sheet
DISCUSSIONS
View all HMC432 EngineerZone Discussions.
• HMC432 Data Sheet
SAMPLE AND BUY
TOOLS AND SIMULATIONS
Visit the product page to see pricing options.
• HMC432 S-Parameter
TECHNICAL SUPPORT
REFERENCE MATERIALS
Quality Documentation
Submit a technical question or find your regional support
number.
• HMC Legacy PCN: SOT26 and SOT26E packages -
Relocation of pre-existing production equipment to new
building
DOCUMENT FEEDBACK
Submit feedback for this data sheet.
• Package/Assembly Qualification Test Report: Plastic
Encapsulated SOT26 (QTR: 02017 REV: 01)
• PCN: MS, QS, SOT, SOIC packages - Sn/Pb plating vendor
change
• Semiconductor Qualification Test Report: GaAs HBT-A
(QTR: 2013-00228)
This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not
trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.
HMC432 / 432E
v04.0410
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 8 GHz
Input Sensitivity Window, T= 25 °C
Input Sensitivity Window vs. Temperature
20
15
10
5
20
15
10
4
5
Min Pin +25 C
Max Pin +25 C
Min Pin -40 C
0
0
Recommended
Operating Window
Max Pin -40 C
Min Pin +85 C
Max Pin +85 C
-5
-10
-15
-20
-5
-10
-15
-20
0
1
2
3
4
5
6
7
8
9
10
0
1
2
3
4
5
6
7
8
8
8
9
9
9
10
10
10
INPUT FREQUENCY (GHz)
INPUT FREQUENCY (GHz)
SSB Phase Noise
Performance, Pin= 0 dBm, T= 25 °C
Output Power vs. Temperature
0
0
-20
-2
-4
-6
-40
-60
-80
-100
-120
-140
-160
-8
+25 C
-40 C
+85 C
-10
-12
102
103
104
OFFSET FREQUENCY (Hz)
105
106
107
0
1
2
3
4
5
6
7
INPUT FREQUENCY (GHz)
Output Harmonic
Content, Pin= 0 dBm, T= 25 °C
Reverse Leakage, Pin= 0 dBm, T= 25 °C
0
-10
-20
-30
0
-10
-20
-30
-40
-50
-60
Pfeedthru
-40
3rd Harmonic
-50
0
1
2
3
4
5
6
7
0
1
2
3
4
5
6
7
8
9
10
INPUT FREQUENCY (GHz)
INPUT FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
4 - 67
Application Support: Phone: 1-800-ANALOG-D
HMC432 / 432E
v04.0410
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 8 GHz
Output Voltage Waveform,
Pin= 0 dBm, Fout= 882 MHz,T= 25 °C
200
4
100
0
-100
-200
-300
22.4
22.8
23.2
23.6
24
24.4
24.8
TIME (nS)
Absolute Maximum Ratings
Reliability Information
RF Input Power (Vcc = +3V)
Nominal +3V Supply to GND
Max Peak Flow Temperature
Storage Temperature
15 dBm
Junction Temperature to Maintain
1 Million Hour MTTF
135 °C
99 °C
-0.3V to 3.5V
260 °C
Nominal Junction Temperature
(T = 85 °C)
-65 to +125 °C
150 V
Thermal Resistance
(Junction to GND Paddle, 3V Supply)
108 °C/W
ESD Sensitivity (HBM)
Operating Temperature
-40 to +85 °C
Typical Supply Current vs. Vcc
DC blocking capacitors are required at RF input and RF output ports.
Choose value for lowest frequency of operation.
Vcc (V)
2.70
Icc (mA)
34
42
50
3.00
3.30
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Note: Divider will operate over full voltage range shown above
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
4 - 68
Application Support: Phone: 1-800-ANALOG-D
HMC432 / 432E
v04.0410
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 8 GHz
Outline Drawing
4
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking [3]
H432
XXXX
HMC432
Low Stress Injection Molded Plastic
Sn/Pb Solder
432E
XXXX
MSL1 [2]
HMC432E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
Pin Description
Pin Number
Function
Description
Interface Schematic
The pins are not connected internally; however, all
data shown herein was measured with these pins
connected to RF/DC ground externally.
1, 4
N/C
2
3
GND
Pin must connect to RF/DC ground.
IN
RF input must be DC blocked.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
4 - 69
Application Support: Phone: 1-800-ANALOG-D
HMC432 / 432E
v04.0410
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 8 GHz
Pin Description (Continued)
Pin Number
Function
Description
Interface Schematic
4
5
Vcc
Supply voltage 3V 0.3V.
6
OUT
Divided output must be DC blocked.
Application Circuit
Note: Line lengths on pins 1 & 4
(N/C) are not necessary.
Note:
DC blocking capacitor values (C1, C2) and DC decoupling capacitor
values (C3, C4) are chosen for lowest frequency of operation.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
4 - 70
Application Support: Phone: 1-800-ANALOG-D
HMC432 / 432E
v04.0410
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 8 GHz
Evaluation PCB
4
List of Materials for Evaluation PCB 105675 [1]
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads should be connected directly to the ground
plane similar to that shown. A sufficient number of
via holes should be used to connect the top and
bottom ground planes. The evaluation circuit board
shown is available from Hittite upon request.
Item
Description
J1 - J2
J3 - J4
C1 - C2
C3
PCB Mount SMA RF Connector
DC Pin
100 pF Capacitor, 0402 Pkg.
1000 pF Capacitor, 0402 Pkg.
10 μF Tantalum Capacitor, 1206 Pkg.
HMC432 / HMC432E Divide-by-2
105199 Eval Board
C4
U1
[2]
PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
4 - 71
Application Support: Phone: 1-800-ANALOG-D
相关型号:
![](http://pdffile.icpdf.com/pdf2/p00289/img/page/HMC433ETR_1756859_files/HMC433ETR_1756859_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00289/img/page/HMC433ETR_1756859_files/HMC433ETR_1756859_2.jpg)
HMC433ETR
Prescaler, 433 Series, 1-Func, GAAS, PDSO6, 3 X 3 MM, ROHS COMPLIANT, PLASTIC, SOT-26, 6 PIN
HITTITE
©2020 ICPDF网 联系我们和版权申明