HMC443LP4TR [ADI]
RF/MICROWAVE FREQUENCY QUADRUPLER;
| 型号： | HMC443LP4TR |
| 厂家： | 
ADI |
| 描述： | RF/MICROWAVE FREQUENCY QUADRUPLER 射频 微波 |
| 文件： | 总6页 (文件大小：245K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HMC443LP4 / 443LP4E
v04.0210
SMT GaAs HBT MMIC x4 ACTIVE
FREQUENCY MULTIPLIER, 9.8 - 11.2 GHz OUTPUT
Typical Applications
Features
Active Multiplier for X Band Applications:
• Fiber Optic
Output Power: +4 dBm
Sub-Harmonic Suppression: >25 dBc
SSB Phase Noise: -142 dBc/Hz
Single Supply: 5V@ 52 mA
• Point-to-Point Radios
• Military Radar
24 Lead 4x4 mm SMT Package: 16 mm2
5
Functional Diagram
General Description
The HMC443LP4
&
HMC443LP4E are active
miniature x4 frequency multipliers utilizing InGaP
GaAs HBT technology in 4x4 mm leadless surface
mount packages. Power output is +4 dBm typical
from a 5V supply voltage and varies little vs. input
power, temperature and supply voltage. Suppression
of undesired fundamental and sub-harmonics is >25
dBc typical with respect to output signal level. The
low additive SSB phase noise of -142 dBc/Hz at 100
kHz offset helps the user maintain good system noise
performance. The HMC443LP4 & HMC443LP4E are
ideal for use in LO multiplier chains allowing reduced
parts count vs. traditional approaches.
Electrical Specifications, TA = +25° C, Vcc= 5V
Parameter
Frequency Range, Input
Frequency Range, Output
Input Power Range
Min.
Typ.
Max.
+5
Units
GHz
GHz
dBm
dBm
dBc
2.45 - 2.80
9.8 - 11.2
-15
1
Output Power
4
25
15
8
Sub-Harmonic Suppression
Input Return Loss
dB
Output Return Loss
dB
SSB Phase Noise (100 kHz Offset)
Supply Current (Icc)
Pin= 0 dBm
-142
52
dBc/Hz
mA
69
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
5 - 42
HMC443LP4 / 443LP4E
v04.0210
SMT GaAs HBT MMIC x4 ACTIVE
FREQUENCY MULTIPLIER, 9.8 - 11.2 GHz OUTPUT
Output Power vs.
Temperature @ -10 dBm Drive Level
Output Power vs. Drive Level
8
7
6
5
4
3
2
8
7
6
5
4
3
2
-20 dBm
-15 dBm
1
1
5
+25 C
-10 dBm
+85 C
-5 dBm
0
-1
-2
0
-40 C
0 dBm
+5 dBm
-1
-2
9.6
9.8
10
10.2 10.4 10.6 10.8
11
11.2 11.4
9.6
9.8
10
10.2 10.4 10.6 10.8
11
11.2 11.4
OUTPUT FREQUENCY (GHz)
OUTPUT FREQUENCY (GHz)
Output Power vs.
Supply Voltage @ -10 dBm Drive Level
Input Return Loss vs. Temperature
8
7
6
5
4
3
2
0
-5
+25 C
+85 C
-40 C
-10
-15
-20
-25
-30
1
0
Vcc=4.5V
Vcc=5.0V
Vcc=5.5V
-1
-2
1
1.5
2
2.5
3
3.5
4
9.6
9.8
10
10.2 10.4 10.6 10.8
OUTPUT FREQUENCY (GHz)
11
11.2 11.4
FREQUENCY (GHz)
Output Return Loss vs. Temperature
0
-2
+25 C
+85 C
-40 C
-4
-6
-8
-10
-12
-14
-16
8
9
10
11
12
13
14
15
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
5 - 43
HMC443LP4 / 443LP4E
v04.0210
SMT GaAs HBT MMIC x4 ACTIVE
FREQUENCY MULTIPLIER, 9.8 - 11.2 GHz OUTPUT
SSB Phase Noise
Performance, Fout= 10.5 GHz
Output Spectrum
0
10
-20
-40
0
-10
-20
-30
-40
-50
-60
Pin= 0dBm
Pin= -10dBm
-60
-80
-100
-120
-140
-160
5
102
103
104
105
106
107
0
2
4
6
8
10 12 14 16 18 20 22 24 26
OFFSET FREQUENCY (Hz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
5 - 44
HMC443LP4 / 443LP4E
v04.0210
SMT GaAs HBT MMIC x4 ACTIVE
FREQUENCY MULTIPLIER, 9.8 - 11.2 GHz OUTPUT
Absolute Maximum Ratings
Typical Supply Current vs. Vcc
RF Input (Vcc = +5V)
+20 dBm
Vcc (V)
Icc (mA)
Vcc
+5.5V
4.5
51
52
54
Channel Temperature
135 °C
5.0
Continuous Pdiss (T=85 °C)
(derate 7.6 mW/°C above 85 °C)
5.5
500 mW
Note: Multiplier will operate over full voltage range shown
above.
Thermal Resistance (Rth)
(junction to ground paddle)
130.8 °C/W
5
Storage Temperature
Operating Temperature
-65 to +150 °C
-40 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking [3]
H443
XXXX
HMC443LP4
Low Stress Injection Molded Plastic
Sn/Pb Solder
H443
XXXX
MSL1 [2]
HMC443LP4E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
5 - 45
HMC443LP4 / 443LP4E
v04.0210
SMT GaAs HBT MMIC x4 ACTIVE
FREQUENCY MULTIPLIER, 9.8 - 11.2 GHz OUTPUT
Pin Description
Pin Number
Function
Description
Interface Schematic
The pins are not connected internally; however, all
data shown herein was measured with these pins
connected to RF/DC ground externally.
1, 2, 5 - 14,
17, 18, 20 - 24
N/C
RF input needs to be DC blocked only if there is an
external DC voltage applied to RF IN.
3
RFIN
5
All ground leads and ground paddle must be soldered
to PCB RF/DC ground.
4, 15
16
GND
RFOUT
Vcc
Multiplied Output. AC coupled.
No external DC blocks necessary.
19
Supply voltage 5V 0.5V.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
5 - 46
HMC443LP4 / 443LP4E
v04.0210
SMT GaAs HBT MMIC x4 ACTIVE
FREQUENCY MULTIPLIER, 9.8 - 11.2 GHz OUTPUT
Evaluation PCB
5
List of Materials for Evaluation PCB 106137 [1]
The circuit board used in the final application
should be generated with proper RF circuit design
techniques. Signal lines should have 50 ohm
impedance while the package ground leads and
exposed paddle should be connected directly to the
ground plane similar to that shown. The evaluation
circuit board shown is available from Hittite upon
request.
Item
J1 - J3
C1
Description
PCB Mount SMA Connector
1,000 pF Capacitor, 0603 Pkg.
HMC443LP4 / HMC443LP4E
x4 Active Multiplier
U1
[2]
PCB
104610 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
5 - 47
相关型号：
©2020 ICPDF网 联系我们和版权申明