HMC483MS8GE [ADI]
High IP3 Mixer SMT w/LO Amplifier, 700 - 1500 MHz;型号: | HMC483MS8GE |
厂家: | ADI |
描述: | High IP3 Mixer SMT w/LO Amplifier, 700 - 1500 MHz 局域网 射频 微波 |
文件: | 总6页 (文件大小:781K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HMC483MS8G / 483MS8GE
v01.0710
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.5 GHz
Typical Applications
Features
The HMC483MS8G / HMC483MS8GE is ideal for:
+33 dBm Input IP3
• Cellular/3G
Conversion Loss: 9 dB
• GSM, GPRS & EDGE
Low LO Drive: -4 to +4 dBm
10
• CDMA & WCDMA
Single Positive Supply: 5V @ 5mA
Ultra Small MSOP Packag14.8m
Included in the HMC-DK00egner’s K
• Cable Modem Termination Systems
Functional Diagram
General Descripon
The HM483MS8G & HMC83MS8GE are high dy-
namiange assive MMIC mixers with integrated
LO ams in plac surface mount 8 lead Mini
Small OutlPaages (MSOP) covering 0.7 to 1.5
GHz. Excelleinput IP3 performance of +33 dBm
or down cnversion and +30 dBm for up conversion
irovid for 2.5G & 3G GSM/CDMA applications
atanOdriveof0dBm. Withaninput1dBcompression
of +24 dBm, the RF port will accept a wide range of
input signal levels. Conversion loss is 9 dB typical.
The DC to 350 MHz IF frequency response will satisfy
GSM/CDMA transmit or receive frequency plans
configured for low side LO. The HMC483MS8G(E)
are pin for pin compatible with the HMC485MS8G(E)
which are 1.7 - 2.2 GHz mixers with LO amplifiers.
Electrical tion, TA = +25°C, LO = 0 dBm, IF = 70 MHz*, Vdd= 5V
Frequency Rang
Frequency Range, IF
Conversion Loss
Min.
Typ.
0.8 - 1.1
DC - 350
8.5
Max.
Min.
Typ.
Max.
Units
GHz
MHz
dB
0.7 - 1.5
DC - 350
10.5
10.5
9
9
12
12
Noise Figure (SSB)
8.5
dB
LO to RF Isolation
10
6
20
6
6
14
dB
LO to IF Isolation
10
13
dB
IP3 (Input)
33
33
dBm
dBm
dBm
mA
1 dB Gain Compression (Input)
LO Input Drive Level (Typical)
Supply Current
24
23
-4 to +4
50
-4 to +4
50
*Unless otherwise noted, all measurements performed as a downconverter.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
10 - 230
Application Support: Phone: 1-800-ANALOG-D
HMC483MS8G / 483MS8GE
v01.0710
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.5 GHz
Conversion Gain vs. Temperature
Isolation
0
0
-5
-10
10
-10
-15
-20
-20
+ 25C
+ 85C
- 40C
IF
-30
RF
LF
-40
0.6
0.
0.8
0.9
1.1
1.2
1.3
1.4
1.5
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
FREQUY (GHz)
RF FREQUENCY (GHz)
Return Ls
Conversion Gain vs. LO Drive
0
0
-5
-10
-15
-20
-10
LO = -6 dBm
LO = -4 dB
LO = -2 dB
LO = 0 dB
LO = +2 dB
LO = +4 dBm
-15
-20
LO
RF
0.6
0.7
0.8
0.9
.2
1.3
1.5
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
FREQUENCY (GHz)
RF F
Upconverteman
Conversio
IF Bandwidth
0
0
CONVERSION GAIN
RETURN LOSS
-5
-10
-15
-20
-5
-10
LO = -6 dBm
LO = -4 dBm
LO = -2 dBm
LO = 0 dBm
LO = +2 dBm
LO = +4 dBm
-15
-20
0
80
160
240
320
400
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
IF FREQUENCY (MHz)
RF FREQUENCY (GHz)
*Unless otherwise noted, all measurements performed as a downconverter, with low side LO & IF = 70 MHz.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
10 - 231
Application Support: Phone: 1-800-ANALOG-D
HMC483MS8G / 483MS8GE
v01.0710
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.5 GHz
Input IP3 vs. LO Drive
Input IP3 vs. Temperature
40
40
35
30
35
30
10
=-6
m
LBm
LO m
LO =
LO =+4
+ 25C
+ 85C
- 40C
25
25
20
20
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.3
1.3
1.4
1.5
1.5
1.5
0.6
0.
0.8
0.9
1.1
1.2
1.3
1.4
1.5
FREQUENCY (GHz)
FREQUY (GHz)
Input IP2 vs. Temperature
Input IP2 s. LDrive
40
40
35
30
25
20
30
25
20
LO =-6dBm
LO =-4dBm
LO =-2dBm
LO = 0dBm
LO =+2dBm
LO =+4dBm
+ 2
+ 8
- 40
0.6
0.7
0.8
0.9
.2
1.4
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
FR
FREQUENCY (GHz)
Input P1derature
Upconverter IP3 vs. LO Drive
30
40
25
30
20
20
LO =-6dBm
LO =-4dBm
LO =-2dBm
LO = 0dBm
LO =+2dBm
LO =+4dBm
+ 25C
15
10
0
+ 85C
- 40C
10
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
0.7
0.8
0.9
1
1.1
1.2
1.4
FREQUENCY (GHz)
RF FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
10 - 232
Application Support: Phone: 1-800-ANALOG-D
HMC483MS8G / 483MS8GE
v01.0710
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.5 GHz
MxN Spurious Outputs
Harmonics of LO
nLO
nLO Spur at RF Port
LO Freq GHz
1
21
15
12
9
2
3
4
mRF
0
xx
4
1
-9
2
3
3
4
16
0.7
23
23
26
22
24
18
23
33
42
25
25
43
39
32
27
26
0
1
2
3
4
24
0.8
0
30
15
61
89
108
28
61
95
108
10
0.9
66
83
106
71
95
105
50
1
103
103
1.1
1.2
6
3
RF Freq = 0.87 GHz @ -10 dBm
LO Freq = 0.8 GHz @ 0 dBm
All values in dBc Relative to the IF power level.
LO power = 0 dBm
All values in dBc beut LO level med at RF port.
Absolute Maximum Ratings
RF/IF Input
+27 dBm
+10 dBm
+7 Vdc
ELCTROSTATIC SENSITIVE DEVICE
BSERVHANDLING PRECAUTIONS
LO Drive
Bias Supply (Vdd)
Channel Temperature
150 °C
Continuous Pdiss (T = 85°C)
(Derate 8.95 mW/°C above 85°C)
0.58 W
Thermal Resistance (RTH
)
111.7 °C/W
(Channel to ground paddle)
Storage Temperature
Operating Temperature
IF DC Current
-65 to +150 °C
-40 to +85 °C
40 mA
ESD Sensitivity (HBM)
Class 1B
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
10 - 233
Application Support: Phone: 1-800-ANALOG-D
HMC483MS8G / 483MS8GE
v01.0710
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.5 GHz
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking [3]
H483
XXXX
HMC483MS8G
HMC483MS8GE
Low Stress Injection Molded Plastic
Sn/Pb Solder
H483
XXXX
MSL1 [2]
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
10
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
Pin Descriptions
Pin Number
Function
Descriptin
Interface Schematic
Thioupled
anhms.
1
LO
Nonncted. This e connected to RF/DC
ground ithout affecting performance.
2
N/C
This pin anhe ground paddle must be
cected to RF ground.
3, 6, 7
GND
Power supply for LO amplifier.
An external RF bypass capacitor is required.
4
This pin is DC coupled. For applications not requiring
operation to DC this port should be DC blocked externally
using a series capacitor. Choose value of capacitor to pass
IF frequency desired. For operation to DC, this pin must
not sink/source more than 40 mA of current or failure may
result.
5
8
IF
This pin is DC coupled
and matched to 50 Ohms.
RF
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
10 - 234
Application Support: Phone: 1-800-ANALOG-D
HMC483MS8G / 483MS8GE
v01.0710
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.5 GHz
Evaluation PCB
10
List of MEvaluation PCB 105188 [1]
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from Hit-
tite upon request.
Item
J1 - J3
J4 - J5
C1
nt SMA RF Connector
DC Pin
10,000 pF Chip Capacitor, 0603 Pkg.
HMC483MS8G / HMC483MS8GE Mixer
104813 Evaluation Board
U1
[2]
PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
10 - 235
Application Support: Phone: 1-800-ANALOG-D
相关型号:
HMC484MS8GETR
Diversity Switch, 0MHz Min, 3000MHz Max, 1.3dB Insertion Loss-Max, ROHS COMPLIANT, ULTRA SMALL, PLASTIC, SMT, MSOP-8
HITTITE
©2020 ICPDF网 联系我们和版权申明