HMC491LP3E [ADI]

Low Noise Amplifier SMT with Bypass Mode, 3.4 - 3.8 GHz;
HMC491LP3E
型号: HMC491LP3E
厂家: ADI    ADI
描述:

Low Noise Amplifier SMT with Bypass Mode, 3.4 - 3.8 GHz

射频 微波
文件: 总6页 (文件大小:687K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
HMC491LP3 / 491LP3E  
v03.1206  
GaAs MMIC LOW NOISE AMPLIFIER  
w/ BYPASS MODE, 3.4 - 3.8 GHz  
8
Typical Applications  
Features  
The HMC491LP3 / HMC491LP3E is ideal for:  
• Wireless Local Loop (WLL)  
• Fixed Wireless Access  
Gain: 16 dB  
Noise Figure: 2 dB  
Single Supply: +3V @ 9 mA  
Integrated Bypass Mode  
50 Ohm Matched Input/Ouut  
3 x 3 x 1 mm QFN SMPac
• Microwave & VSAT Radios  
Functional Diagram  
General Descripn  
The HM491LP3 & HMC49LP3E are versatile, inte-  
grateLow Nse Amplifiers (LNA) featuring a bypass  
mode ined for 3to 3.8 GHz Fixed Wireless &  
WLL appliionsThe amplifier provides 16 dB of  
gain, 2 dB nofigure and +3 dBm input IP3 while  
equiring oy 9 mA from a +3V supply. Using a single  
ctrol e, the LNA can be switched into a low loss  
2.2 bypass mode reducing the current consump-  
ion to 20 μA. A low cost, leadless 3x3 mm QFN sur-  
face mount package (LP3) houses the amplifier. No  
external RF matching components are required.  
Electrical atioTA = +25° C, Vdd = +3V  
LNA Mode  
LNA Mode  
Bypass Mode  
Units  
Min.  
Typ.  
3.4 - 3.6  
17  
Max.  
Min.  
13  
Typ.  
3.6 - 3.8  
15.5  
0.012  
2.0  
Max.  
Min.  
Typ.  
3.4 - 3.8  
-2.3  
0.004  
--  
Max.  
Frequency Range  
GHz  
dB  
Gain  
14.5  
-2.8  
Gain Variation Over Temperature  
Noise Figure  
0.012  
2.2  
0.02  
2.7  
0.02  
2.5  
0.008 dB / °C  
--  
dB  
dB  
Input Return Loss  
12  
17  
18  
Output Return Loss  
9
7
11  
dB  
Reverse Isolation  
34  
33  
--  
dB  
Input or Output Power for 1dB Compression (P1dB)*  
3
6
4
7
25  
28  
dBm  
Input Third Order Intercept (IP3)  
(-20 dBm Input Power per tone, 1 MHz tone spacing)  
1
9
3
9
11  
dBm  
mA  
Supply Current (Idd)  
0.03  
* P1dB for LNA Mode is referenced to RFOUT while P1dB for Bypass Mode is referenced to RFIN.  
Information furnished by Analog Devices is believed to be accurate and reliable. However, no  
For price, delivery, and to place orders: Analog Devices, Inc.,  
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
rights of third parties thatmay resultfromitsuse.Specificationssubject to changewithout notice. NoPOhnoenTee:c7h8n1o-3lo2g9y-4W7a0y0, P.OOr.dBeorxon9l1in0e6,aNtworwwwoo.adn,aMloAg.0c2o0m62-9106  
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.  
8 - 126  
Application Support: Phone: 1-800-ANALOG-D  
Trademarks and registered trademarks are the property of their respective owners.  
HMC491LP3 / 491LP3E  
v03.1206  
GaAs MMIC LOW NOISE AMPLIFIER  
w/ BYPASS MODE, 3.4 - 3.8 GHz  
LNA Mode  
Broadband Gain & Return Loss  
LNA Mode  
Gain vs. Temperature  
8
20  
20  
15  
18  
16  
10  
S21  
S11  
5
0
S22  
-5  
14  
-10  
-15  
-20  
-25  
C  
-4
12  
10  
2.8  
3
3.2  
3.4  
3.6  
3.8  
4
3.4  
3.5  
.6  
FREQU(GHz)  
3.7  
3.8  
3.8  
3.8  
FREQUENCY (GHz)  
LNA Mode  
Input Return Loss vs. Temperature  
LNA M
Output RurLoss vs. Temperature  
0
0
+25 C  
+85 C  
-40 C  
3  
-6  
+25 C  
+85 C  
-40 C  
-5  
-10  
-15  
-20  
-9  
-12  
-15  
3.4  
3.5  
FR
3.7  
3.8  
3.4  
3.5  
3.6  
FREQUENCY (GHz)  
3.7  
LNA Mode  
Noise Figperature  
LNA Mode  
Reverse Isolation vs. Temperature  
5
0
+25 C  
+85 C  
-40 C  
4
3
2
1
0
-10  
+25 C  
-20  
+85 C  
-40 C  
-30  
-40  
3.4  
3.5  
3.6  
FREQUENCY (GHz)  
3.7  
3.8  
3.4  
3.5  
3.6  
3.7  
FREQUENCY (GHz)  
Information furnished by Analog Devices is believed to be accurate and reliable. However, no  
For price, delivery, and to place orders: Analog Devices, Inc.,  
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106  
rights of third parties that may result from its use. Specifications subject to change without notice. No  
Phone: 781-329-4700 • Order online at www.analog.com  
Application Support: Phone: 1-800-ANALOG-D  
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.  
Trademarks and registered trademarks are the property of their respective owners.  
8 - 127  
HMC491LP3 / 491LP3E  
v03.1206  
GaAs MMIC LOW NOISE AMPLIFIER  
w/ BYPASS MODE, 3.4 - 3.8 GHz  
LNA Mode  
LNA Mode  
8
Output P1dB vs. Temperature  
Psat vs. Temperature  
12  
12  
10  
8
10  
8
6
6
+25 C  
+85 C  
-40 C  
+25 C  
+85
4
2
0
4
2
0
3.4  
3.5  
3.6  
FREQUENCY (GHz)  
3.7  
3.8  
3.4  
3.5  
.6  
FREQU(GHz)  
3.7  
3.8  
LNA Mode  
Input IP3 vs. Temperature  
LNA MGain, Noise Figure & Supply  
Current vSuply Voltage @ 3.6 GHz  
6
12  
22  
18  
14  
10  
Noise Figure  
Idd  
10  
8
4
2
0
6
4
Gain  
+25 C  
+85 C  
-40 C  
-2  
-4  
2
0
3.4  
3.5  
FR
3.7  
3.8  
2.7  
2.8  
2.9  
3
3.1  
3.2  
3.3  
Vdd (Vdc)  
Bypass Mo
Bypass Mode  
BroadbanLoss & Return Loss  
Insertion Loss vs. Temperature  
0
0
-5  
-1  
-2  
-10  
-15  
-3  
S21  
+25 C  
-20  
S11  
-4  
-5  
+85 C  
-40 C  
S22  
-25  
2.8  
3
3.2  
3.4  
3.6  
3.8  
4
3.4  
3.5  
3.6  
FREQUENCY (GHz)  
3.7  
3.8  
FREQUENCY (GHz)  
Information furnished by Analog Devices is believed to be accurate and reliable. However, no  
For price, delivery, and to place orders: Analog Devices, Inc.,  
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
rights of third parties thatmay resultfromitsuse.Specificationssubject to changewithout notice. NoPOhnoenTee:c7h8n1o-3lo2g9y-4W7a0y0, P.OOr.dBeorxon9l1in0e6,aNtworwwwoo.adn,aMloAg.0c2o0m62-9106  
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.  
8 - 128  
Application Support: Phone: 1-800-ANALOG-D  
Trademarks and registered trademarks are the property of their respective owners.  
HMC491LP3 / 491LP3E  
v03.1206  
GaAs MMIC LOW NOISE AMPLIFIER  
w/ BYPASS MODE, 3.4 - 3.8 GHz  
Bypass Mode  
Input Return Loss vs. Temperature  
Bypass Mode  
Output Return Loss vs.Temperature  
8
0
0
+25 C  
+85 C  
-40 C  
+25 C  
-5  
-10  
-15  
-20  
-25  
-3  
+85 C  
-40 C  
-6  
-9  
-12  
-15  
3.4  
3.5  
3.6  
FREQUENCY (GHz)  
3.7  
3.8  
3.4  
3.5  
.6  
3.7  
3.8  
FREQUE(GHz)  
Bypass Mode  
Bypasode  
Input IP3 vs. Temperature  
Input P1vsTemperature  
20  
30  
16  
12  
8
8  
26  
+25 C  
+85 C  
-40 C  
24  
22  
20  
+25 C  
+85 C  
-40 C  
4
0
3.4  
3.5  
FR
3.7  
3.8  
3.4  
3.5  
3.6  
FREQUENCY (GHz)  
3.7  
3.8  
Absolute Ratings  
Typical Supply Current vs. Vdd  
Drain Bias Vol
+7.0 Vdc  
Vdd (Vdc)  
Idd (mA)  
RF Input Power (
(Vdd = +3.0 Vdc)  
LNA Mode 0 dBm  
Bypass Mode +30 dBm  
+2.7  
7.6  
9.0  
+3.0  
Channel Temperature  
150 °C  
+3.3  
10.2  
Continuous Pdiss (T = 85 °C)  
(derate 1.8 mW/°C above 85 °C)  
0.117 W  
Truth Table  
Thermal Resistance  
(channel to ground paddle)  
556 °C/W  
LNA Mode  
Vctl= Vdd @ 1.6 mA  
Bypass Mode  
Vctl= 0Vdc @ -13 µA  
Vdd= +3V 10%  
Storage Temperature  
Operating Temperature  
-65 to +150 °C  
-40 to +85 °C  
ELECTROSTATIC SENSITIVE DEVICE  
OBSERVE HANDLING PRECAUTIONS  
Information furnished by Analog Devices is believed to be accurate and reliable. However, no  
For price, delivery, and to place orders: Analog Devices, Inc.,  
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106  
rights of third parties that may result from its use. Specifications subject to change without notice. No  
Phone: 781-329-4700 • Order online at www.analog.com  
Application Support: Phone: 1-800-ANALOG-D  
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.  
Trademarks and registered trademarks are the property of their respective owners.  
8 - 129  
HMC491LP3 / 491LP3E  
v03.1206  
GaAs MMIC LOW NOISE AMPLIFIER  
w/ BYPASS MODE, 3.4 - 3.8 GHz  
8
Outline Drawing  
NOTES:  
1. LEADFRAME MATERIAL: COPALLOY  
2. DIMENSIONS ARE IN INCHES [MRS]  
3. LEAD SPG TOLERANCE IS NOUMULATIVE  
4. PAD BURR LTH SHALL BE 15mm MAXIMUM.  
PAD BURR HEISHALL B05mm MAXIMUM.  
5WARP SL EXCEED 0.05mm.  
LEADS GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.  
TE APPLICATION NOTE FOR SUGGESTED LAND PATTERN.  
Package Information  
Part Number  
Packagody Material  
Lead Finish  
MSL Rating  
MSL1 [1]  
Package Marking [3]  
491  
XXXX  
HMC491LP3  
Low Stress Ilded stic  
Sn/Pb Solder  
491  
XXXX  
MSL1 [2]  
HMC491LP3E  
RoHS-cow Stress ectMolded Plastic  
100% matte Sn  
[1] Max peak reflow temper
[2] Max peak reflow temperat
[3] 4-Digit lot number XXXX  
Pin Desc
Pin Number  
Description  
Interface Schematic  
No connection necessary.  
These pins may be connected to RF/DC ground.  
1, 5 - 8, 12, 13  
N/C  
2, 4, 9, 11, 15  
GND  
These pins must be connected to RF/DC ground.  
3
RF IN  
This pin is AC coupled and matched to 50 Ohms.  
This pin is AC coupled and matched to 50 Ohms.  
10  
RF OUT  
14  
Vdd  
Power supply voltage.  
Control voltage. Vctl= Vdd for LNA mode.  
Vctl= 0V for bypass mode.  
16  
Vctl  
Information furnished by Analog Devices is believed to be accurate and reliable. However, no  
For price, delivery, and to place orders: Analog Devices, Inc.,  
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
rights of third parties thatmay resultfromitsuse.Specificationssubject to changewithout notice. NoPOhnoenTee:c7h8n1o-3lo2g9y-4W7a0y0, P.OOr.dBeorxon9l1in0e6,aNtworwwwoo.adn,aMloAg.0c2o0m62-9106  
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.  
8 - 130  
Application Support: Phone: 1-800-ANALOG-D  
Trademarks and registered trademarks are the property of their respective owners.  
HMC491LP3 / 491LP3E  
v03.1206  
GaAs MMIC LOW NOISE AMPLIFIER  
w/ BYPASS MODE, 3.4 - 3.8 GHz  
8
Evaluation PCB  
List of MEvaluation PCB 107174 [1]  
The circuit board used in the final application should  
use RF circuit design techniques. Signal lines  
should have 50 ohm impedance while the package  
ground leads and exposed paddle should be con-  
nected directly to the ground plane similar to that  
shown. A sufficient number of via holes should be  
used to connect the top and bottom ground planes.  
The evaluation circuit board shown is available from  
Hittite upon request.  
Item  
J1 - J2  
J3 - J6  
U1  
nt SMA RF Connector  
DC Pin  
HMC491LP3 / HMC491LP3E Amplifier  
107431 Evaluation PCB  
[2]  
PCB  
[1] Reference this number when ordering complete evaluation PCB  
[2] Circuit Board Material: Rogers 4350  
Information furnished by Analog Devices is believed to be accurate and reliable. However, no  
For price, delivery, and to place orders: Analog Devices, Inc.,  
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106  
rights of third parties that may result from its use. Specifications subject to change without notice. No  
Phone: 781-329-4700 • Order online at www.analog.com  
Application Support: Phone: 1-800-ANALOG-D  
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.  
Trademarks and registered trademarks are the property of their respective owners.  
8 - 131  

相关型号:

HMC491LP3ETR

暂无描述
HITTITE

HMC491LP3TR

暂无描述
HITTITE

HMC491LP3_09

GaAs MMIC LOW NOISE AMPLIFIER w/ BYPASS MODE, 3.4 - 3.8 GHz
HITTITE

HMC492LP3

SMT GaAs HBT MMIC DIVIDE-BY-2, DC - 18 GHz
HITTITE

HMC492LP3E

SMT GaAs HBT MMIC DIVIDE-BY-2, DC - 18 GHz
HITTITE

HMC492LP3ETR

暂无描述
HITTITE

HMC492LP3TR

暂无描述
HITTITE

HMC492LP3_08

SMT GaAs HBT MMIC DIVIDE-BY-2, DC - 18 GHz
HITTITE

HMC493LP3

SMT GaAs HBT MMIC DIVIDE-BY-4, DC - 18 GHz
HITTITE

HMC493LP3

InGaP HBT Divide-by-4 SMT, DC - 18 GHz
ADI

HMC493LP3E

SMT GaAs HBT MMIC DIVIDE-BY-4, DC - 18 GHz
HITTITE

HMC493LP3ETR

InGaP HBT Divide-by-4 SMT, DC - 18 GHz
ADI