HMC697LP4RTR [ADI]
HMC697LP4RTR;HMC697LP4 / 697LP4E
v01.0309
SiGe WIDEBAND DIRECT QUADRATURE
MODULATOR, 200 - 4000 MHz
Typical Applications
Features
The HMC697LP4(E) is Ideal for:
• UMTS, GSM or CDMA Basestations
• Fixed Wireless or WLL
Very Low Noise Floor, -165 dBm/Hz
Excellent Carrier & Sideband Suppression
Very High Linearity, +22 dBm OIP3
High Output Power, +9 dBm Output P1dB
High Modulation Accuracy
• ISM Transceivers, 900 & 2400 MHz
• GMSK, QPSK, QAM, SSB Modulators
• Cellular/3G and WiMAX/4G
24 Lead 4x4 mm QFN Package: 16 mm2
10
Functional Diagram
General Description
The HMC697LP4(E) is a low noise, high linearity Direct
Quadrature Modulator RFIC which is ideal for digital
modulation applications from 0.2 to 4.0 GHz including;
Cellular/3G, WiMAX/4G, Broadband Wireless Access
& ISM circuits. Housed in a compact 4x4 mm (LP4)
SMT QFN package, the RFIC requires minimal external
components & provides a low cost alternative to more
complicated double upconversion architectures. The
RF output port is single-ended and matched to 50
Ohms with no external components. The LO requires
-6 to +6 dBm and can be driven in either differential or
single-ended mode. This device is optimized for a +5V
supply, and offers improved carrier feedthrough and
sideband suppression characteristics.
Electrical Specifications, See Test Conditions on following page herein.
Parameter
Frequency Range, RF
Output P1dB
Min.
Typ.
450 - 960
+8
Max.
Min.
Typ.
1700 - 2200
+8
Max.
Min.
Typ.
Max. Min.
Typ. Max.
Units
MHz
2200 - 2700
3400 - 4000
+8
-165
+22
3
+7
-165
+20
2
dBm
Output Noise Floor
Output IP3
-167
+23
-165
dBm/Hz
dBm
+22
Output Power
2
4
1.5
3.5
1
0
dBm
Carrier Feedthrough (uncalibrated)
-38
-38
-40
-33
dBm
Sideband Suppression
(uncalibrated)
43
42
43
45
dBc
LO Port Return Loss
RF Port Return Loss
12
25
15
17
14
15
8
dB
dB
16
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
10 - 76
HMC697LP4 / 697LP4E
v01.0309
SiGe WIDEBAND DIRECT QUADRATURE
MODULATOR, 200 - 4000 MHz
Electrical Specifications, (continued)
Parameter
Conditions
Min.
200
Typ.
15
Max.
4000
Units
RF Output
RF Frequency Range
RF Return Loss
MHz
dB
LO Input
LO Frequency Range
LO Input Power
200
-6
4000
+6
MHz
dBm
dB
0
LO Port Return Loss
Baseband Input Port
Baseband Input DC Voltage (Vbbdc)
Baseband Input DC Bias Current (Ibbdc)
12
+1.4
+4.5
+1.5
90
+1.6
+5.5
V
10
Single-ended.
μA
pF
Single-ended Baseband Input Capacitance
DC Power Requirements
De-embed to the lead of the device.
See Test Conditions Below
4.5
Supply Voltage (Vcc1, Vcc2)
+5.0
168
V
Supply Current (Icc1 + Icc2)
mA
Test Conditions: Unless Otherwise Specified, the Following Test Conditions Were Used
Parameter
Condition
+25 °C
200 kHz
+1.5V
Temperature
Baseband Input Frequency
Baseband Input DC Voltage (Vbbdc)
Baseband Input AC Voltage
(Peak to Peak Differential, I and Q)
1.6V
Baseband Input AC Voltage for OIP3 Measurement (Peak to Peak Differential, I and Q)
800 mV per tone @ 150 & 250 kHz
Frequency Offset for Output Noise Measurements
Supply (Vcc1, Vcc2)
20 MHz
+5.0V
LO Input Power
0 dBm
LO Input Mode
Single-Ended through LOP
Mounting Configuration
Refer to HMC697LP4E Application Schematic Herein
Uncalibrated
Sideband & Carrier Feedthrough
Calibrated vs. Uncalibrated Test Results
During the Uncalibrated Sideband and Carrier Suppression tests, care is taken to ensure that the I/Q signal paths from
the Vector Signal Generator (VSG) to the Device Under Test (DUT) are equal. The “Uncalibrated, +25 °C” Sideband
and Carrier Suppression plots were measured at room temperature, while the “Uncalibrated, over Temperature”
Sideband and Carrier Suppression plots represent the worst case uncalibrated suppression levels measured at T=
-40 °C, +25 °C, and +85 °C.
The “Calibrated, + 25 °C” Sideband Suppression data was plotted after a manual adjustment of the I/Q amplitude
balance and I/Q phase offset (skew) at +25 °C, and at each LO input power level. The +25 °C adjustment settings
were held constant during tests over temperature. The “Calibrated, over Temperature” plots represent the worst case
calibrated Sideband Suppression levels at T= -40 °C, +25 °C, and +85 °C.
The “Calibrated, +25 °C” Carrier Suppression data was plotted after a manual adjustment of the Ip/In & Qp/Qn DC
offsets at +25 °C, and at each LO input power level. The +25 °C adjustment settings were held constant during tests
over temperature. The “Calibrated, over Temperature” plots represent the worst case Carrier Suppression levels
measured at T= -40 °C, +25 °C, and +85 °C.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
10 - 77
HMC697LP4 / 697LP4E
v01.0309
SiGe WIDEBAND DIRECT QUADRATURE
MODULATOR, 200 - 4000 MHz
Output IP3, P1dB & Noise Floor
@ 20 MHz Offset vs. Frequency
Wideband Performance vs. Frequency
10
30
20
10
0
-120
-130
-140
-150
-160
-170
-180
OUTPUT IP3
5
OUTPUT P1dB
0
+25C
+85C
-40C
-10
-20
-30
+25C
+85C
-40C
NOISE FLOOR
-5
SET-UP NOISE FLOOR
-10
10
0
500 1000 1500 2000 2500 3000 3500 4000
0
500 1000 1500 2000 2500 3000 3500 4000
FREQUENCY (MHz)
FREQUENCY (MHz)
[1]
[1]
Uncalibrated Carrier Feedthrough
Calibrated Carrier Feedthrough
vs. Frequency Over Temperature
vs. Frequency Over Temperature
0
0
-10
-10
+25C
+85C
-40C
+25C
+85C
-40C
-20
-20
-30
-40
-50
-60
-70
-30
-40
-50
-60
-70
0
500 1000 1500 2000 2500 3000 3500 4000
FREQUENCY (MHz)
0
500 1000 1500 2000 2500 3000 3500 4000
FREQUENCY (MHz)
Sideband Suppression vs. Frequency
Return Loss vs. Frequency
0
0
-10
-5
-10
-15
-20
-25
-30
-35
+25C
+85C
-40C
-20
-30
-40
-50
-60
-70
LO
RF
0
500 1000 1500 2000 2500 3000 3500 4000
FREQUENCY (MHz)
0
500 1000 1500 2000 2500 3000 3500 4000
FREQUENCY (MHz)
[1] See note titled “Calibrated vs. Uncalibrated test results” herein.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
10 - 78
HMC697LP4 / 697LP4E
v01.0309
SiGe WIDEBAND DIRECT QUADRATURE
MODULATOR, 200 - 4000 MHz
Output IP3, P1dB & Noise Floor @ 20 MHz
Offset vs. Frequency Over LO Power
Wideband Performance
vs. Frequency Over LO Power
10
0
30
20
10
0
-120
-130
-140
-150
-160
-170
-180
OUTPUT IP3
OUTPUT POWER
5
-15
-30
-45
-60
OUTPUT P1dB
-6 dBm
0
-5
-6 dBm
0 dBm
+6 dBm
0 dBm
+6 dBm
-10
-20
-30
NOISE FLOOR
SIDEBAND SUPPRESSION
SET-UP NOISE FLOOR
-10
10
0
500 1000 1500 2000 2500 3000 3500 4000
0
500 1000 1500 2000 2500 3000 3500 4000
FREQUENCY (MHz)
FREQUENCY (MHz)
[1]
[1]
Calibrated Carrier Feedthrough
Uncalibrated Carrier Feedthrough
vs. Frequency Over LO Power
vs. Frequency Over LO Power
0
0
-10
-10
-6 dBm
0 dBm
+6 dBm
-20
-20
-6 dBm
0 dBm
+6 dBm
-30
-40
-50
-60
-70
-30
-40
-50
-60
-70
0
500 1000 1500 2000 2500 3000 3500 4000
FREQUENCY (MHz)
0
500 1000 1500 2000 2500 3000 3500 4000
FREQUENCY (MHz)
Output IP3, P1dB & Noise Floor
@ 20 MHz vs. Offset Frequency
Over Supply Voltage
Wideband Performance
vs. Frequency Over Supply Voltage
10
30
-120
-130
-140
-150
-160
-170
-180
0
IP3
20
OUTPUT POWER
5
-15
-30
-45
-60
P1dB
10
4.5V
5.0V
5.5V
0
0
4.5V
5.0V
5.5V
-10
-20
-30
NOISE FLOOR
-5
SIDEBAND SUPPRESSION
SET-UP NOISE FLOOR
-10
0
500 1000 1500 2000 2500 3000 3500 4000
FREQUENCY (MHz)
0
500 1000 1500 2000 2500 3000 3500 4000
FREQUENCY (MHz)
[1] See note titled “Calibrated vs. Uncalibrated test results” herein.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
10 - 79
HMC697LP4 / 697LP4E
v01.0309
SiGe WIDEBAND DIRECT QUADRATURE
MODULATOR, 200 - 4000 MHz
ACPR for W-CDMA @ 2140 MHz, 1 Carrier
-60
Absolute Maximum Ratings
Vcc1, Vcc2
0V to +6V
LO Input Power
+18 dBm
Baseband Input Voltage (AC + DC)
(Reference to GND)
-65
-70
-75
-80
0V to + 2.8V
150 °C
Junction Temperature
Continuous Pdiss (T = 85°C)
(Derate 30 mW/°C above 85°C)
1.8 Watts
Thermal Resistance (Rth)
(junction to ground paddle)
34 °C/W
Storage Temperature
Operating Temperature
ESD Sensitivity (HBM)
-65 to +150 °C
-40 to +85 °C
Class 1A
10
-30
-25
-20
-15
-10
-5
0
CARRIER OUTPUT POWER (dBm)
Note 1: W-CDMA (Modulation Set-up for ACPR Mode); The
Baseband I and Q input signals were generated using “Test Model 1
with 64 channels” settings in the Agilent E3844C.
Note 2: The I/Q baseband amplitude and phase inputs were offset
to achieve Sideband Rejection (SBR) levels. LO = +6 dBm, SSB
Power = 0 dBm
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking [3]
H697
XXXX
HMC697LP4
Low Stress Injection Molded Plastic
Sn/Pb Solder
H697
XXXX
MSL1 [2]
HMC697LP4E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
10 - 80
HMC697LP4 / 697LP4E
v01.0309
SiGe WIDEBAND DIRECT QUADRATURE
MODULATOR, 200 - 4000 MHz
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
1, 6, 7, 13, 15
N/C
Not connected.
2, 5, 8, 11,
12, 14, 17, 19,
20, 23
These pins and the ground paddle should be
connected to a high quality RF/DC ground.
GND
LO inputs. Need DC decoupling capacitors.
The ports could be driven single ended or differentially.
3, 4
LOP, LON
10
Q channel differential baseband input. These high
impedance ports should be biased around 1.5V DC.
Nominal recommended baseband input is around
1.6V pp differential.
9, 10
QN, QP
DC coupled and matched to 50 Ohms,
output requires blocking capacitor.
16
RFOUT
Supply voltage for the mixer and
output stages 79mA @ +5.0V.
18
21, 22
24
Vcc1
IP, IN
Vcc2
I channel differential baseband input.
These high impedance ports should be at the
same bias voltage (VbbDC) as Qn & Qp.
Supply voltage for the LO stage 88mA @ +5.0V.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
10 - 81
HMC697LP4 / 697LP4E
v01.0309
SiGe WIDEBAND DIRECT QUADRATURE
MODULATOR, 200 - 4000 MHz
Evaluation PCB
10
List of Materials for Evaluation PCB 121965[1]
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
Item
Description
J1 - J7
J8, J9
C1 - C3
C4, C5
C6, C7
R1
PC Mount SMA Connector
DC Molex Connector
100 pF Chip Capacitor, 0402 Pkg.
1000 pF Chip Capacitor, 0402 Pkg.
4.7 uF, Case A, Tantalum
0 Ohm Resistor, 0402 Pkg.
49.9 Ohm Resistor, 0402 Pkg.
HMC697LP4 Modulator
121961 Eval Board
R2
U1
[2]
PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
10 - 82
HMC697LP4 / 697LP4E
v01.0309
SiGe WIDEBAND DIRECT QUADRATURE
MODULATOR, 200 - 4000 MHz
Application & Evaluation PCB Schematic
10
Characterization Set-up
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
10 - 83
相关型号:
©2020 ICPDF网 联系我们和版权申明