PM1012GP [ADI]
Low Power Precision Operational Amplifier; 低功耗精密运算放大器型号: | PM1012GP |
厂家: | ADI |
描述: | Low Power Precision Operational Amplifier |
文件: | 总4页 (文件大小:78K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Low Power Precision
Operational Amplifier
a
PM1012
FEATURES
P IN CO NNECTIO NS
Low Supply Current: 600 A Max
Very Low Offset: 35 V Max
Low Drift: 1.5 V/ ؇C Max
Very Low Bias Current
P lastic Mini-D IP (P Suffix)
8-Lead SO (S Suffix)
25؇C: 100 pA Max
Low Noise: 0.5 V p-p Typ
High Com m on-Mode Rejection: 114 dB Min
1
2
3
4
8
7
6
5
NULL
V+
NULL
–IN
+IN
OUT
OVER
COMP
V–
PM1012
noise contributions when high source impedances are used. T he
PM1012 may be overcompensated, using Pin 5 to limit the
amplifier’s bandwidth, further reducing system noise and in-
creasing stability with large capacitive loads.
GENERAL D ESCRIP TIO N
T he PM1012 is a general purpose, precision operational ampli-
fier. Offering several performance enhancements over industry-
standard precision op amps such as the OP07, the PM1012
requires less than 1/6 the supply current. T hese enhancements
include exceptionally low bias currents of only ±80 pA, typical,
over the full military temperature range, and 132 dB of com-
mon-mode rejection and power-supply rejection. T he PM1012’s
low offset voltage of 35 µV maximum frees the user from exter-
nal nulling in most circuits.
The PM1012 conforms to the OP07 pinout with nulling through
Pins 1 and 8 to the positive supply. It offers an upgrade to the
OP07 in sockets where reduced power dissipation or low bias
currents are attractive. It may also be used as an upgrade from
the OP12, OP05 and 725 type op amps. T he PM1012 may
replace 741 type op amps by removing the nulling potentiom-
eter, if used.
An open-loop gain of two million into a 10 kΩ load ensures that
excellent linearity is maintained even in high gain configura-
tions, and 5 mA of output current allows 2 kΩ loads to be
driven with an open-loop gain of one million. T he PM1012
offers low noise, especially for a low power amplifier—only
17 nV/√Hz at 10 Hz. Exceptionally low current noise minimizes
REV. C
Inform ation furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assum ed by Analog Devices for its
use, nor for any infringem ents of patents or other rights of third parties
which m ay result from its use. No license is granted by im plication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norw ood, MA 02062-9106, U.S.A.
Tel: 781/ 329-4700
Fax: 781/ 326-8703
World Wide Web Site: http:/ / w w w .analog.com
© Analog Devices, Inc., 1998
PM1012–SPECIFICATIONS
(@ V = ؎15 V, V = 0 V, T = +25؇C, unless otherwise noted)
ELECTRICAL CHARACTERISTICS
S
CM
A
P M1012G
Typ
P aram eter
Sym bol
Conditions
Min
Max
Units
Input Offset Voltage
VOS
(Note 1)
10
25
50
120
µV
µV
Long-T erm
VOS Stability
Input Offset Current
∆VOS/T ime
IOS
0.3
20
30
±30
±40
0.5
17
14
µV/Month
pA
pA
pA
pA
µV p-p
nV/√Hz
nV/√Hz
fA/√Hz
V/mV
V/mV
dB
dB
V
V
V/µs
kHz
MHz
µA
(Note 1)
(Note 1)
150
200
±150
±200
Input Bias Current
IB
Input Noise Voltage
Input Noise Voltage Density
en p-p
en
0.1 Hz to 10 Hz
fO = 10 Hz2
30
22
fO = 1000 Hz3
fO = 10 Hz
Input Noise Current Density
Large-Signal Voltage Gain
In
AVO
20
VO = ±12 V; RL = 10 kΩ
VO = ±10 V; RL = 2 kΩ
VCM = ±13.5 V
VS = ±2 V to ±20 V
(Note 4)
200
120
110
110
±13.5
±13
0.1
2000
1000
132
132
±14.0
±14
0.2
3
0.5
380
Common-Mode Rejection
Power-Supply Rejection
Input Voltage Range
Output Voltage Swing
Slew Rate
Full-Power Bandwidth
Gain Bandwidth Product
Supply Current
CMR
PSR
IVR
VO
RL = 10 kΩ
SR
BWP
GBW
ISY
AV = +100
(Note 1)
600
Supply Voltage
VS
Operating Range
±2
±15
±20
V
NOT ES
1T hese specifications apply for ±2 V ≤ VS ≤ ± 20 V and –13.5 V ≤ VCM ≤ +13.5 V (for VS = ± 15 V).
210 Hz noise voltage density is sample tested. Devices 100% tested for noise are available on request.
3Sample tested.
4Guaranteed by CMR test.
Specifications subject to change without notice.
(@ V = ؎15 V, V = 0 V, –40؇C ≤ T ≤ +85؇C for PM1012GP, GS, unless otherwise noted)
ELECTRICAL CHARACTERISTICS
S
CM
A
P M1012G
Typ
P aram eter
Sym bol
Conditions
Min
Max
Units
Input Offset Voltage
VOS
20
30
120
200
µV
µV
Average T emperature
Coefficient of VOS
Input Offset Current
T CVOS
IOS
(Note 1)
(Note 1)
0.2
20
40
1.5
230
300
µV/°C
pA
pA
Average T emperature
Coefficient of IOS
Input Bias Current
T CIOS
IB
0.3
±35
±50
2.5
±230
±300
pA/°C
pA
pA
(Note 1)
Average T emperature
Coefficient of IB
Large Signal Voltage Gain
T CIB
AVO
0.3
1500
800
130
128
±14.0
±14
0.15
400
2.5
pA/°C
V/mV
V/mV
dB
dB
V
V
V/µs
µA
VO = ±12 V; RL = 10 kΩ
VO = ±10 V; RL = 2 kΩ
VCM = ±13.5 V
VS = ±2.5 V to ±20 V
(Note 2)
150
100
108
108
±13.5
±13
0.05
Common-Mode Rejection
Power Supply Rejection
Input Voltage Range
Output Voltage Swing
Slew Rate
CMR
PSR
IVR
VO
SR
ISY
RL = 10 kΩ
Supply Current
(Note 1)
800
Supply Voltage
VS
Operating Range
±2.5
±15
±20
V
NOT ES
1T hese specifications apply for ±2.5 V ≤ VS ≤ ± 20 V and –13.5 V ≤ VCM ≤ +13.5 V (for VS = ±15 V).
2Guaranteed by CMR test.
Specifications subject to change without notice.
–2–
REV. C
PM1012
ABSO LUTE MAXIMUM RATINGS1
NOT ES
1Absolute maximum ratings apply to both DICE and packaged parts, unless
otherwise noted.
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 V
Input Voltage2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 V
Differential Input Voltage3 . . . . . . . . . . . . . . . . . . . . . . ±1 V
Differential Input Current3 . . . . . . . . . . . . . . . . . . . . ±10 mA
Output Short-Circuit Duration . . . . . . . . . . . . . . . . Indefinite
Operating T emperature Range
PM1012G (P, S) . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
Storage T emperature Range . . . . . . . . . . . . –65°C to +150°C
Junction T emperature Range . . . . . . . . . . . . –65°C to +150°C
Lead T emperature (Soldering, 60 sec) . . . . . . . . . . . +300°C
2For supply voltages less than ±20 V, the absolute maximum input voltage is equal
to the supply voltage.
3T he PM1012’s inputs are protected by back-to-back diodes. Current-limiting
resistors are not used in order to achieve low noise. Differential input voltages
greater than 1 V will cause excessive current to flow through the input protection
diodes unless limiting resistance is used.
4θJA is specified for worst case mounting conditions, i.e., θJA is specified for device
in socket for cerdip, and P-DIP packages; θJA is specified for device soldered to
printed circuit board for SO package.
O RD ERING GUID E
4
P ackage Type
Units
JA
JC
Tem perature
Range
P ackage
D escription
P ackage
O ptions
8-Lead Plastic DIP (P)
8-Lead SO (S)
103
158
43
43
°C/W
°C/W
Model
PM1012GP
PM1012GS
–40°C to +85°C
–40°C to +85°C
Plastic DIP
SOIC
N-8
SO-8
CAUTIO N
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the PM1012 features proprietary ESD protection circuitry, permanent damage may
occur on devices subjected to high energy electrostatic discharges. T herefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
REV. C
–3–
PM1012
O UTLINE D IMENSIO NS
D imensions shown in inches and (mm).
8-Lead P lastic D IP
(N-8)
0.430 (10.92)
0.348 (8.84)
8
5
0.280 (7.11)
0.240 (6.10)
1
4
0.325 (8.25)
0.300 (7.62)
0.060 (1.52)
0.015 (0.38)
PIN 1
0.195 (4.95)
0.115 (2.93)
0.210 (5.33)
MAX
0.130
(3.30)
MIN
0.160 (4.06)
0.115 (2.93)
0.015 (0.381)
0.008 (0.204)
SEATING
PLANE
0.022 (0.558) 0.100
0.070 (1.77)
0.045 (1.15)
(2.54)
BSC
0.014 (0.356)
8-Lead SO IC
(SO -8)
0.1968 (5.00)
0.1890 (4.80)
8
1
5
4
0.1574 (4.00)
0.1497 (3.80)
0.2440 (6.20)
0.2284 (5.80)
PIN 1
0.0688 (1.75)
0.0532 (1.35)
0.0196 (0.50)
x 45؇
0.0098 (0.25)
0.0040 (0.10)
0.0099 (0.25)
8؇
0؇
0.0500
(1.27)
BSC
0.0192 (0.49)
0.0138 (0.35)
SEATING
PLANE
0.0500 (1.27)
0.0160 (0.41)
0.0098 (0.25)
0.0075 (0.19)
–4–
REV. C
相关型号:
©2020 ICPDF网 联系我们和版权申明