SW201-813Q [ADI]
IC SGL POLE SGL THROW SWITCH, Multiplexer or Switch;型号: | SW201-813Q |
厂家: | ADI |
描述: | IC SGL POLE SGL THROW SWITCH, Multiplexer or Switch |
文件: | 总5页 (文件大小:379K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
This specification documents the detail requirements for space qualified product manufactured on Analog
Devices, Inc.'s QML certified line per MIL-PRF-38535 Level V except as modified herein. The manufacturing
flow described in the STANDARD SPACE LEVEL PRODUCTS PROGRAM brochure is to be considered a
part of this specification. http://www.analog.com/aerospace. This data sheet specifically details the space
grade version of this product. A more detailed operational description and a complete data sheet for
commercial product grades can be found at www.analog.com/SW201.
The complete part number(s) of this specification follow:
Part Number
SW201-803Q
Description
Quad SPST JFET Analog Switch
Letter
Q
Descriptive designator
GDIP1-T16
Case Outline (Lead Finish per MIL-PRF-38535)
16-Lead ceramic dual-in-line package (CERDIP)
Figure 1 - Terminal connections.
(TA = 25°C, unless otherwise noted)
Operating Temperature Range....................................................................-55°C to +125°C
Storage Temperature Range.......................................................................-65°C to +150°C
Power Dissipation .....................................................................................................900mW
Lead Temperature (Soldering, 60 sec.).....................................................................+300°C
Maximum Junction Temperature (TJ) ........................................................................+150°C
V+ Supply to V- Supply ...................................................................................................36V
V+ Supply to Ground.......................................................................................................36V
Logic Input Voltage Range..............................................................(-4V or V-) to V+ Supply
Analog Input Voltage
Continuous ................................................................... V- Supply to V+ Supply +20V
1% Duty Cycle and Driving all 4 inputs
................................................V- Supply –15V to V+ Supply +20V
Maximum Current Through Any Pin.............................................................................30mA
Thermal Resistance, Q (cerdip) Package
Junction-to-Case (JC) = 29°C/W Max
Junction-to-Ambient (JA) = 91°C/W Max
TABLE I NOTES:
1
2
3
Current Tested at VIN = 2V (worst case condition)
VA, VIH, VIL is verified by leakage and RON tests.
RON Match specified as a percentage of Raverage where Raverage = RON1 + RON2 + RON3 + RON4
4
TABLE II NOTES
1/
2/
PDA applies to Subgroup 1. Exclude delta's from PDA.
See Table III for delta parameters. See Table I for test conditions.
5.1
5.2
5.3
HTRB is not applicable for this drawing.
Burn-in is per MIL-STD-883 Method 1015 test condition C.
Steady state life test is per MIL-STD-883 Method 1005.
相关型号:
©2020 ICPDF网 联系我们和版权申明