MIC-5301 [ADVANTECH]
AdvancedTCA? Dual-Core Low Voltage Intel? Xeon? Processor Board with Two AMC Slots; AdvancedTCA的?双核低电压英特尔?至强?双AMC插槽处理器板型号: | MIC-5301 |
厂家: | Advantech Co., Ltd. |
描述: | AdvancedTCA? Dual-Core Low Voltage Intel? Xeon? Processor Board with Two AMC Slots |
文件: | 总2页 (文件大小:269K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AdvancedTCA® Dual-Core Low Voltage
Intel® Xeon® Processor Board with Two
AMC Slots
MIC-5301
Features
. Two Dual-Core Intel® Xeon® processors LV 2.0 GHz
. Intel E7520® chipset supports 667 MHz FSB
. Dual channel DDR2 400 MHz ECC Registered SDRAM, configurable up to 16
GB
. Four 1000Base-BX ports on Fabric interface
. Two 1000Base-Tx ports on Base interface
. Two PCI Express x4 (PCIe) AMC slots with style B/B+ connector
. Supports optional Serial Attached SCSI (SAS) module
. SAS ports module to Rear-Transition Module (RTM)
. One serial port for IPMI on front panel
. Two USB 2.0 ports in front and in RTM; One 2.5" SATA/SAS HDD on RTM
RoHS
COMPLIANT
2002/95/EC
Introduction
Advantech’s MIC-5301 single-slot AdvancedTCA® processor blade combines computing performance with I/O flexibility in a power efficient quad core, dual AMC design. Featuring
two high performance Dual-Core Intel® Xeon® LV processors, the MIC-5301 facilitates the consolidation of multiple single core designs and frees up valuable system slots for
increased processing power or I/O connectivity.
The MIC-5301’s overall design flexibility positions it for use as a common processing blade for multiple applications. As architecture re-use means gains in economies of scale,
the MIC-5301 is ideally suited for a wide range of application processing needs. Two single full-size AMC sites support the use of a variety of AMC modules such as coprocessors,
TCP/IP offload engines, physical disks, LAN or WAN adapters. Packet throughput is increased by enhanced fabric connectivity with four Gigabit Ethernet ports to the fabric interface
in addition to the two Gigabit Ethernet ports to the base interface.
An Intel E7520 Memory Controller Hub MCH and Intel 6300ESB I/O Controller Hub provide high-end server class support for the two dual-core processors. The E7520 addresses
up to 16 GB of dual channel DDR2 ECC Registered SDRAM in 4 DIMM sockets. Further connectivity is supported via an optional Serial Attached SCSI (SAS) module with SAS ports
connected to a Rear Transition Module mounted SAS drive. IPMI 1.5 support is assured by a PigeonPoint System® (PPS) Solution on a Renesas H8S/2167.
Advantech offers a range of innovative ATCA customization services specifically targeted at Telecommunications Equipment Manufacturers (TEMs). Advantech’s Design To Order
Services (DTOS) team partners with TEMs to evaluate project requirements and develop TEM-specific solutions in order to improve overall operating costs. The MIC-5301 is an
example where proven core engineering IP can be re-used as a base for a TEM specific design.
Connector to Fabric
& Base Interface
Four DDR2
memory sockets
-48 V power and
IPMI connector
Connector to RTM
RJ-45 COM2 port for
IPMI program & terminal
Two USB
2.0 ports
Two AdvancedMC
slots
20 Status
indicators
RJ-45
COM1 port
MIC-5301
Specifications
CPU
Two Dual-Core Intel Xeon LV processors
Max. Speed
Chipset
2.0 GHz
Intel E7520 MCH
Processor System
BIOS
Dual 4Mbit FWHs with AMI embedded BIOS
Bus
Front Size Bus
Technology
Max. Capacity
Socket
667 MHz
Dual channel DDR2 400 MHz SDRAM (72-bit ECC Registered)
Configurable up to 16 GB
4
Memory
Two 10/100/1000Base-TX ports for base interface; Four 1000Base-BX ports for fabric interface (compliant
with PICMG 3.1 option 2)
Interface
Ethernet
Controller
BCM5715S (PCIe x4) and BCM5715C (PCIe x4)
Serial (COM)
Serial (BMC)
USB 2.0
Compatibility
BMC Controller
IPMI
1 (RS-232, RJ-45 connector)
1 (RS-232, RJ-45 connector)
2
Front I/O Interface
Operating System
IPMC
Windows 2000; Windows 2003; Linux
Renesas H8S/2167
Compliant with IPMI 1.5 using Pigeon Point System® (PPS) Solution
Hardware Monitor
Output
Interval
Site
Interface
LM93
System reset; system power down
Set in BIOS menu for 10 sec, 30 sec, 1 min and 5 min
2
Watchdog Timer
AMC
PCI Express x4
Power limit
Solid State Disk
LED Indicator
Storage module
Real Time Clock
30 watts
One CompactFlash socket
20
SAS daughter module with four ports up to 3 Gb/s for each
Built-in
Miscellaneous
Two external SAS ports
Two USB 2.0 port
One 2.5" SATA/SAS HDD (HDD not included)
Real I/O interface
Storage Site
RTM
Node blade: 294.56 x 322.25 mm (11.60" x 12.69")
RTM: 94 x 322.25 mm (3.7" x 12.69")
Node blade: 2 kg (4.41 lb)
RTM: 0.275 kg (0.61 lb)
Dimensions (W x D)
Physical Characteristics
Weight
Operating
Non-operating
Temperature
Humidity
Shock
0 ~ 65° C (32 ~ 149° F)
NA
20 G
1.5 Grms
- 40 ~ 70° C (-40 ~ 158° F)
95% @ 60° C (non-condensing)
50 G
2 G
Environment
Compliance
Vibration (5 ~ 500 Hz)
PICMG 3.0 R2.0 AdvancedTCA Base Specification
PICMG 3.1 R1.0 Ethernet/Fibre Channel for ATCA Systems
PICMG AMC.0 R1.0 Advanced Mezzanine Card Base Specification
PICMG AMC.1 R1.0 PCI Express and Advanced Switching
Two external SAS ports
2.5" SATA or SAS HDD
Two USB 2.0 ports
MIC-5301 Rear Transition Module (RTM)
Online Download
www.advantech.com/products
相关型号:
MIC-5322-P1
AdvancedTCA? 10GbE Dual Socket CPU Blade with Intel? Xeon? 5500 Series Processor
ADVANTECH
MIC-5322-P2
AdvancedTCA? 10GbE Dual Socket CPU Blade with Intel? Xeon? 5500 Series Processor
ADVANTECH
MIC-5332SA1-P1E
AdvancedTCA® 10GbE Dual Socket CPU Blade with Intel® Xeon® E5-2600 Processors
ADVANTECH
MIC-5332SA1-P2E
AdvancedTCA® 10GbE Dual Socket CPU Blade with Intel® Xeon® E5-2600 Processors
ADVANTECH
MIC-5333
AdvancedTCA, Dual Socket CPU Blade with Intel® Xeon® E5 Series Processors, Dual-Dual 40G Fabric Interface and Acceleration Support
ADVANTECH
MIC-5333M-P01
AdvancedTCA, Dual Socket CPU Blade with Intel® Xeon® E5 Series Processors, Dual-Dual 40G Fabric Interface and Acceleration Support
ADVANTECH
©2020 ICPDF网 联系我们和版权申明