RHD5980-901-1S [AEROFLEX]

RadHard-by-Design RHD5980 Octal Bus Transceiver Bidirectional Voltage Level Shifter;
RHD5980-901-1S
型号: RHD5980-901-1S
厂家: AEROFLEX CIRCUIT TECHNOLOGY    AEROFLEX CIRCUIT TECHNOLOGY
描述:

RadHard-by-Design RHD5980 Octal Bus Transceiver Bidirectional Voltage Level Shifter

文件: 总5页 (文件大小:403K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Datasheet  
Standard Products  
RadHard-by-Design  
RHD5980 Octal Bus Transceiver  
Bidirectional Voltage Level Shifter  
www.aeroflex.com/RHDseries  
April 29, 2014  
FEATURES  
Bidirectional Voltage translator with two separate supply rails.  
Radiation performance  
- Total dose:  
>1Mrad(Si); Dose rate = 50 - 300 rads(Si)/s  
- ELDRS Immune  
- SEL Immune  
>100 MeV-cm2/mg  
- Neutron Displacement Damage >1014 neutrons/cm2  
Full military temperature range  
Designed for aerospace and high reliability space applications  
Packaging – Hermetic ceramic SOIC  
- 24-pin, .614"L x .299"W x .120"Ht  
- Weight - 2.0 grams max  
Aeroflex Plainview’s Radiation Hardness Assurance Plan is DLA Certified to MIL-PRF-38534, Appendix G.  
GENERAL DESCRIPTION  
Aeroflex’s RHD5980 is a radiation hardened, Octal Level Shifter in a 24-pin SOIC package. The RHD5980  
design uses specific circuit topology and layout methods to mitigate total ionizing dose effects and single  
event latchup. These characteristics make the RHD5980 especially suited for the harsh environment  
encountered in Deep Space missions. It is guaranteed operational from -55°C to +125°C. Available  
screened in accordance with MIL-PRF-38534 Class K, the RHD5980 is ideal for demanding military and  
space applications.  
ORGANIZATION AND APPLICATION  
The RHD5980 Octal Level Shifter is a radiation hard replacement for the industry standard Bidirectional  
Voltage Translators. It is capable of level shifting from the A-to-B or B-to-A input ports for nominal logic  
voltages on either port of 5.0 or 3.3 volts.  
The RHD5980 can level shift from 5.0V to 3.3V or 3.3V to 5.0V, and also buffer from 5.0V to 5.0V or 3.3V  
to 3.3V. Ports A and B can be inputs or outputs depending on the value of DIR_AB_H.  
Control inputs are the standard tri-state enable (OE_L active low) and direction control DIR_AB_H where  
a HIGH logic steers data from A-to-B and active LOW steers the data from B-to-A.  
The control inputs are powered from VCCA and accept inputs at the A bus logic levels (either 3.3V or 5.0V).  
All delay parameters are less than 30nS over full -55°C to +125°C military temperature range and logic  
levels. All bus and control inputs have Schmitt trigger buffers to implement low-to-high transition at  
approximately 60% of the corresponding logic supply and high-to-low transition at approximately 40%  
providing considerable noise immunity for slow input signals  
The devices will not latch with SEU events to above 100 MeV-cm2/mg. Total dose degradation is minimal  
to above 1Mrad(Si). Displacement damage environments to neutron fluence equivalents in the mid 1014  
neutrons per cm2 range are readily tolerated. There is no sensitivity to low-dose rate (ELDRS) effects. SEU  
effects are application dependent.  
SCD5980 Rev A  
ABSOLUTE MAXIMUM RATINGS  
Parameter  
Range  
Units  
Case Operating Temperature Range  
Storage Temperature Range  
Junction Temperature  
-55 to +125  
-65 to +150  
+150  
°C  
°C  
°C  
Supply Voltage  
+VCCA, +VCCB  
+6.0  
V
VCC +0.4  
GND -0.4  
V
V
Input Voltage  
Lead Temperature (soldering, 10 seconds)  
300  
°C  
V
ESD Rating (MIL-STD-883, Method 3015, Class 2)  
Power @ 25°C  
2,000 - 3,999  
250  
5
mW  
°C/W  
Thermal Resistance, Junction-to-Case, JC  
NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress rating only;  
functional operation beyond the “Operation Conditions” is not recommended and extended exposure beyond the “Operation Conditions” may affect  
device reliability.  
RECOMMENDED OPERATING CONDITIONS  
Symbol  
Parameter  
Typical  
Units  
+VCCA, +VCCB  
Power Supply Voltage  
3.3 to 5.0  
V
ELECTRICAL PERFORMANCE CHARACTERISTICS  
(TC = -55°C TO +125°C, VCCA = 5.5 V, VCCB = 3.6 V -- UNLESS OTHERWISE SPECIFIED)  
Parameter  
Symbol  
Conditions  
PORT A  
Min  
Max  
Units  
Quiescent Supply Current  
ICCA  
VIN = 5.5 V or GND, No Load  
20  
uA  
Quiescent Supply Current  
Delta  
One input at 3.4 V,  
Other inputs at 5.5 V or GND  
ICCA  
1.5  
mA  
High Level Output Voltage  
VCCA = 4.5 V  
VCCA = 5.5 V  
VCCA = 4.5 V  
VCCA = 5.5 V  
VCCA = 4.5 V  
VCCA = 5.5 V  
VCCA = 4.5 V  
VCCA = 5.5 V  
4.3  
5.3  
3.7  
4.7  
IOH = -100 uA  
IOH = -12 mA  
IOL = 100 uA  
IOL = 12 mA  
VOH  
VOL  
V
V
Low Level Output Voltage  
0.2  
0.2  
0.55  
0.55  
Three-state I/O Leakage  
Current High 3/  
IIOH  
IIOL  
VIN = 5.5 V  
VIN = GND  
500  
500  
nA  
nA  
-500  
-500  
Three-state I/O Input  
Leakage Current Low 3/  
Input Capacitance 2/  
CIN  
CIO  
Control inputs, VIN = VCCA = open or GND  
VO = 5.0 V or GND  
5 TYP  
pF  
pF  
Input/Output Capacitance 2/  
11 TYP  
SCD5980 Rev A 4/29/14  
Aeroflex Plainview  
2
ELECTRICAL PERFORMANCE CHARACTERISTICS (Cont.)  
(TC = -55°C TO +125°C, VCCA = 5.5 V, VCCB = 3.6 V -- UNLESS OTHERWISE SPECIFIED)  
Parameter  
Symbol  
Conditions  
PORT B  
Min  
Max  
Units  
Quiescent Supply Current  
ICCB  
VIN = 3.6 V or GND, No Load  
15  
50  
uA  
uA  
Quiescent Supply Current  
Delta  
One input at 2.7 V to 3.6 V - 0.6 V,  
Other inputs at 2.7 V to 3.6 V or GND  
ICCB  
High Level Output Voltage  
VCCB  
-0.2  
IOH = -100 uA  
VCCB = 2.7 V to 3.6 V  
VOH  
V
VCCB = 2.7 V  
2.2  
2.4  
IOH = -12 mA  
IOH = 100 uA  
IOH = 12 mA  
VCCB = 3.0 V  
Low Level Output Voltage  
0.2  
VCCB = 2.7 V to 3.6 V  
VCCB = 2.7 V  
VOL  
IIOH  
0.55  
0.55  
V
VCCB = 3.0 V  
Three-state I/O Leakage  
Current High 3/  
VIN = 3.6 V  
500  
500  
nA  
-500  
-500  
Three-state I/O Input  
Leakage Current Low 3/  
IIOL  
CIO  
VIN = GND  
nA  
pF  
Input/Output Capacitance 2/  
VO = 5.0 V or GND  
11 TYP  
Switching  
Pro[agation Delay Time  
A to B  
tPHL  
tPLH  
tPHL  
tPLH  
tPZL  
tPZH  
tPZL  
tPZH  
tPLZ  
tPHZ  
tPLZ  
tPHZ  
20  
20  
20  
20  
30  
30  
30  
30  
30  
30  
30  
30  
ns  
ns  
ns  
ns  
ns  
ns  
ns  
ns  
ns  
ns  
ns  
ns  
1
1
1
1
1
1
1
1
1
1
1
1
VCCA = 4.5 V to 5.5 V, VCCB = 2.7 V to 3.6 V,  
CL = 50pF  
Propagation Delay Time  
B to A  
Propagation Delay Time,  
Output Enabled  
OE_L to A  
Propagation Delay Time,  
Output Enabled  
OE_L to B  
Propagation Delay Time,  
Output Disabled  
OE_L to A  
Propagation Delay Time,  
Output Disabled  
OE_L to B  
Notes:  
1/ Specification derated to reflect Total Dose exposure to 1 Mrad(Si) @ 25°C.  
2/ Not tested. Shall be guaranteed by design, characterization or correlation to other test parameters.  
3/ These parameters for Tc = -55°C are guaranteed by design, characterization, or correlation to other test parameters.  
SCD5980 Rev A 4/29/14  
Aeroflex Plainview  
3
FIGURE 1: PACKAGE PIN-OUT  
Note: Package and lid  
are electrically isolated  
from signal pads.  
FIGURE 2: PACKAGE OUTLINE  
SCD5980 Rev A 4/29/14  
Aeroflex Plainview  
4
ORDERING INFORMATION  
Model  
DLA SMD #  
-
Screening  
Package  
RHD5980-7  
Commercial Flow, +25°C testing only  
RHD5980-201-1S  
RHD5980-201-2S  
RHD5980-901-1S  
RHD5980-901-2S  
5962-1222601KXC  
5962-1222601KXA  
5962H1222601KXC  
5962H1222601KXA  
In accordance with DLA SMD  
24-pin  
SOIC Package  
In accordance with DLA Certified RHA Program Plan to  
RHA Level "H", 1Mrad(Si)  
EXPORT CONTROL:  
This product is controlled for export under the International Traffic in Arms Regulations (ITAR). A license from the U.S. Government is required  
prior to the export of this product from the United States.  
w w w . a e r o f l e x . c o m / H i R e l  
i n f o - a m s @ a e r o f l e x . c o m  
Datasheet Definitions:  
Advanced  
Preliminary Shipping Non-Flight Prototypes  
Datasheet Shipping QML and Reduced HiRe  
Product in Development  
l
Aeroflex Plainview, Inc. reserves the right to make changes to any products and  
services described herein at any time without notice. Consult Aeroflex or an authorized  
sales representative to verify that the information in this data sheet is current before  
using this product. Aeroflex does not assume any responsibility or liability arising out  
ofthe application or use of any product orservice described herein, except as expressly  
agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or  
service from Aeroflex convey a license under any patent rights, copyrights, trademark  
rights, or any other of the intellectual rights of Aeroflex or of third parties.  
Our passion for performance is defined by three attributes.  
Solution-Minded  
Performance-Driven  
Customer-Focused  
SCD5980 Rev A 4/29/14  
5

相关型号:

RHD5980-901-2S

RadHard-by-Design RHD5980 Octal Bus Transceiver Bidirectional Voltage Level Shifter
AEROFLEX

RHD8540

RadHard-by-Design RHD8540 64-Channel Analog Multiplexer 32-Channel Kelvin Measurement Configured
AEROFLEX

RHD8540-201-1S

RadHard-by-Design RHD8540 64-Channel Analog Multiplexer 32-Channel Kelvin Measurement Configured
AEROFLEX

RHD8540-7

RadHard-by-Design RHD8540 64-Channel Analog Multiplexer 32-Channel Kelvin Measurement Configured
AEROFLEX

RHD8540-901-1S

RadHard-by-Design RHD8540 64-Channel Analog Multiplexer 32-Channel Kelvin Measurement Configured
AEROFLEX

RHD8540-S

RadHard-by-Design RHD8540 64-Channel Analog Multiplexer 32-Channel Kelvin Measurement Configured
AEROFLEX

RHDL81H105K2DBC03B

CAPACITOR, CERAMIC
MURATA

RHDL81H154K2DBC03B

CAPACITOR, CERAMIC
MURATA

RHDL81H155K2DBC03B

CAPACITOR, CERAMIC
MURATA

RHDL81H224K2DBC03B

CAPACITOR, CERAMIC
MURATA

RHDL81H225K3DBC03B

CAPACITOR, CERAMIC
MURATA

RHDL81H334K2DBC03B

CAPACITOR, CERAMIC
MURATA