D370-02N [AGERE]

D370-Type Digital Uncooled Laser Module; D370型数字式非制冷激光器模块
D370-02N
型号: D370-02N
厂家: AGERE SYSTEMS    AGERE SYSTEMS
描述:

D370-Type Digital Uncooled Laser Module
D370型数字式非制冷激光器模块

文件: 总8页 (文件大小:57K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Data Sheet  
October 2000  
D370-Type Digital Uncooled  
Laser Module  
Applications  
Long-reach SONET OC-3/OC-12 systems  
SDH STM-1/STM-4 systems  
Telecommunications  
Secure digital data systems  
Benefits  
Easily board mounted  
Requires no lead bending  
No additional heat sinks required  
The low-profile D370-Type Laser Module is ideally suited for  
short- and long-reach SONET and other high-speed digital  
applications.  
Pin compatible with industry-standard, 14-pin laser  
module  
Features  
Eight-pin package suitable for SONET/SDH appli-  
cations  
Description  
The D370-type uncooled laser module consists of a  
laser diode coupled to a single-mode fiber pigtail.  
The device is available in a standard, 8-pin configu-  
ration (see Figure 1 and/or Table 1) and is ideal for  
long-haul (SONET) and other digital applications.  
MQW F-P 1.3 µm laser with single-mode fiber pig-  
tail  
Wide operating temperature range:  
–40 °C to +85 °C  
No TEC required  
The module includes a multiquantum-well Fabry-  
Perot (MQW F-P) laser and an InGaAs PIN photo-  
diode back-facet monitor in an epoxy-free, hermeti-  
cally sealed package.  
High output power: typically 1.0 mW peak power  
coupled into single-mode fiber; 0.2 mW and  
2.0 mW versions available  
Hermetically sealed active components  
Internal back-facet monitor  
Qualification program: Telcordia Technologies*  
TA-983  
* Telcordia Technologies is a registered trademark of Telcordia  
Technologies, Inc.  
Data Sheet  
October 2000  
D370-Type Digital Uncooled Laser Module  
central office and uncontrolled environments, and can  
be used for applications requiring high performance  
and low cost.  
Description (continued)  
The device characteristics listed in this document are  
met at 1.0 mW output power. Higher- or lower-power  
operation is possible. Under conditions of a fixed pho-  
todiode current, the change in optical output is typically  
±0.5 dB over an operating temperature range of –40 °C  
to +85 °C.  
Table 1. Pin Descriptions  
Pin Number  
Connection  
1
2
3
4
5
6
7
8
NC/reserved  
Case ground  
This device incorporates the new laser 2000 manufac-  
turing process from the Optoelectronic Products unit of  
Agere Systems Inc. Laser 2000 is a low-cost platform  
that targets high-volume manufacturing and tight prod-  
uct distributions on all optical subassemblies. This plat-  
form incorporates an advanced optical design that is  
produced on Agere Systems’ highly automated produc-  
tion lines. The laser 2000 platform is qualified for the  
NC/reserved  
Photodiode cathode  
Photodiode anode  
Laser diode cathode  
Laser diode anode  
NC/reserved  
4
3
2
1
5
6
7
8
1-900  
Figure 1. D370-Type Digital Uncooled Laser Module Schematic,Top View  
Absolute Maximum Ratings  
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are abso-  
lute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess  
of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended  
periods can adversely affect device reliability.  
Parameter  
Symbol  
Min  
Max  
Unit  
Maximum Peak Laser Drive Current or  
Maximum Fiber Power*  
IOP  
PMAX  
150  
10  
mA  
mW  
Peak Reverse Laser Voltage:  
Laser  
Monitor  
VRL  
VRD  
2
20  
V
V
Monitor Forward Current  
IFD  
TC  
–40  
–40  
2
85  
mA  
°C  
Operating Case Temperature Range  
Storage Case Temperature Range  
Lead Soldering Temperature/Time  
Relative Humidity (noncondensing)  
* Rating varies with temperature.  
Tstg  
85  
°C  
260/10  
85  
°C/s  
%
RH  
2
Agere Sysems Inc.  
Data Sheet  
October 2000  
D370-Type Digital Uncooled Laser Module  
Handling Precautions  
Caution: This device is susceptible to damage as a result of electrostatic discharge (ESD).Take proper pre-  
cautions during both handling and testing. Follow guidelines such as JEDEC Publication No. 108-  
A (Dec. 1988).  
Although protection circuitry is designed into the device, take proper precautions to avoid exposure to ESD.  
Electrical/Optical Characteristics  
Table 2. Electrical/Optical Characteristics (over operating temperature range unless otherwise noted)  
Parameter  
Symbol  
Test Conditions  
Min  
Typ  
Max  
Unit  
Operating Temperature  
Range  
T
–40  
85  
°C  
Optical Output Power*  
Threshold Current  
PF  
CW, nominal  
1
mW  
ITH  
T = 25 °C  
T = full range  
4.5  
1
9
15  
45  
mA  
mA  
Modulation Current  
IMOD  
CW, PF = 1.0 mW, T = 25 °C  
CW, IMON = constant  
T = full range  
10  
8
15  
20  
35  
mA  
mA  
Slope Efficiency†  
Center Wavelength  
RMS Spectral Width  
Tracking Error  
SE  
λC  
CW, PF = 1.0 mW, T = 25 °C  
PF = 1.0 mW, CW  
PF = 1.0 mW, 155 Mbits/s  
IMON = constant, CW  
I = ITH x 0.9  
50  
1270  
75  
100  
1350  
3
µW/mA  
nm  
nm  
dB  
∆λ  
2
TE  
PTH  
tR, tF  
VF  
0.5  
±1  
Spontaneous Emission  
Rise/Fall Times  
50  
µW  
ns  
10%—90% pulse, T = 25 °C  
CW  
0.25  
1.1  
0.5  
1.6  
8
Forward Voltage  
V
Input Impedance  
Monitor Current  
R
3
IMON  
ID  
VR = 5 V  
150  
750  
200  
0.5  
µA  
Monitor Dark Current  
VR = 5 V  
10  
0.4  
nA  
WavelengthTemperature  
Coefficient  
nm/°C  
* Higher and lower powers available. See Table 4 for more information.  
† The slope efficiency is used to calculate the modulation current for a desired output power.This modulation current plus the threshold current  
comprise the total operating current for the device.  
‡ VR = reverse voltage.  
3
Agere Sysems Inc.  
Data Sheet  
October 2000  
D370-Type Digital Uncooled Laser Module  
Characteristic Curve  
3.0  
2500  
2000  
1500  
1000  
L/I CURVE  
2.0  
1.0  
0
FORWARD LASER  
VOLTAGE  
MONITOR DIODE  
500  
0
CURRENT  
0
25  
50  
75  
100  
125  
150  
TEMP = 25 o  
C
LASER CURRENT (mA)  
1-884  
Figure 2.Typical D370-Type Laser Module L/I Curve  
4
Agere Sysems Inc.  
Data Sheet  
October 2000  
D370-Type Digital Uncooled Laser Module  
Outline Diagram  
Dimensions are in inches and (millimeters).  
TRADEMARK, CODE, LASER SERIAL NUMBER,  
AND/OR DATE CODE IN APPROXIMATE AREA SHOWN  
3
6
4
5
2
1
8
7
1.06 (27.0)  
MIN  
39.37 (1000) MIN  
PIGTAIL LENGTH  
0.52 (13.2)  
0.29  
(7.37)  
0.045 (1.143)  
0.20 (5.00)  
0.010  
(0.254)  
0.165 (4.20)  
0.085  
(2.16)  
0.016 (0.410)  
0.110 (2.79)  
0.100 (2.54)  
0.17  
(4.32)  
0.300  
(7.62)  
0.30  
(7.62)  
1-899.f  
5
Agere Sysems Inc.  
Data Sheet  
October 2000  
D370-Type Digital Uncooled Laser Module  
Qualification Information  
The D370-type laser module has passed the following qualification tests and meets the intent of Telcordia Technol-  
ogies TR-NWT-000468 for interoffice environments and TA-TSY-000983 for outside plant environments.  
Table 3. D370-Type Laser Module Qualification Test Plan  
Qualification Test  
Mechanical Shock  
Conditions  
Sample Size  
Reference  
500 G  
11  
MIL-STD-883  
Method 2002  
20 g, 20 Hz—2,000 Hz  
Vibration  
11  
11  
11  
11  
25  
11  
11  
11  
11  
11  
6
MIL-STD-883  
Method 2007  
Solderability  
MIL-STD-883  
Method 2007  
Delta T = 100 °C  
1 kg; 3 times  
85 °C, 5,000 hrs.  
85 °C, 2,000 hrs.  
500 cycles  
Thermal Shock  
MIL-STD-883  
Method 2003  
Fiber Pull  
Telcordia Technologies  
983  
Accelerated (Biased) Aging  
High-temperature Storage  
Temperature Cycling  
Cyclic Moisture Resistance  
Damp Heat  
Telcordia Technologies  
983, Section 5.18  
Telcordia Technologies  
983  
Telcordia Technologies  
983, Section 5.20  
10 cycles  
Telcordia Technologies  
983, Section 5.23  
40 °C, 95% RH, 1344 hrs.  
<5,000 ppm water vapor  
MIL-STD-202  
Method 103  
Internal Moisture  
Flammability  
MIL-STD-883  
Method 1018  
TR357  
Section 4.4.2.5  
ESD Threshold  
Telcordia Technologies  
983, Section 5.22  
6
Agere Sysems Inc.  
Data Sheet  
October 2000  
D370-Type Digital Uncooled Laser Module  
Laser Safety Information  
Class IIIb Laser Product  
FDA/CDRH Class IIIb laser product. All versions are Class IIIb laser products per CDRH, 21 CFR 1040 Laser  
Safety requirements. All versions are Class 3B laser products per IEC* 60825-1:1993. The device has been classi-  
fied with the FDA under accession number 8720010.  
This product complies with 21 CFR 1040.10 and 1040.11.  
8.3 µm single-mode pigtail with optional connector.  
Wavelength = 1.3 µm  
Maximum power = 10 mW  
Because of size constraints, labeling is not affixed to the module but attached to the outside of the shipping carton.  
Product is not shipped with power supply.  
Caution: Use of controls, adjustments, and procedures other than those specified herein may result in  
hazardous laser radiation exposure.  
DANGER  
INVISIBLE LASER RADIATION  
IS EMITTED FROM THE END  
OF FIBER OR CONNECTOR  
Avoid direct exposure to beam  
Do not view beam directly with  
optical instruments  
INVISIBLE LASER RADIATION EMITTED FROM END OF FIBER OR CONNECTOR  
Avoid exposure to beam  
Class 3B Laser Product IEC-60825M 1993 Max. Output: 10 mW  
Wavelength: 1.3 µm  
* IEC is a registered trademark of The International Electrotechnical Commission.  
7
Agere Sysems Inc.  
Data Sheet  
October 2000  
D370-Type Digital Uncooled Laser Module  
Ordering Information  
Table 4. Ordering Information  
Device Code  
Comcode  
Pfiber  
Connector  
D370-02A  
D370-10A  
D370-20A  
D370-10B  
D370-02F  
D370-10F  
D370-20F  
D370-02N  
D370-10N  
D370-20N  
107950859  
107950867  
107950875  
108096322  
107950883  
107950891  
107950909  
107950917  
107950925  
107950933  
0.2 mW  
1.0 mW  
2.0 mW  
1.0 mW  
0.2 mW  
1.0 mW  
2.0 mW  
0.2 mW  
1.0 mW  
2.0 mW  
SC-PC  
SC-PC  
SC-PC  
SC-APC  
FC-PC  
FC-PC  
FC-PC  
none  
none  
none  
For additional information, contact your Agere Systems Account Manager or the following:  
INTERNET:  
E-MAIL:  
http://www.agere.com  
docmaster@micro.lucent.com  
N. AMERICA: Agere Systems Inc., 555 Union Boulevard, Room 30L-15P-BA, Allentown, PA 18109-3286  
1-800-372-2447, FAX 610-712-4106 (In CANADA: 1-800-553-2448, FAX 610-712-4106)  
ASIA PACIFIC: Agere Systems Singapore Pte. Ltd., 77 Science Park Drive, #03-18 Cintech III, Singapore 118256  
Tel. (65) 778 8833, FAX (65) 777 7495  
CHINA:  
Agere Systems (Shanghai) Co., Ltd., 33/F Jin Mao Tower, 88 Century Boulevard Pudong, Shanghai 200121 PRC  
Tel. (86) 21 50471212, FAX (86) 21 50472266  
JAPAN:  
Agere Systems Japan Ltd., 7-18, Higashi-Gotanda 2-chome, Shinagawa-ku, Tokyo 141, Japan  
Tel. (81) 3 5421 1600, FAX (81) 3 5421 1700  
EUROPE:  
Data Requests: DATALINE:Tel. (44) 7000 582 368, FAX (44) 1189 328 148  
Technical Inquiries: OPTOELECTRONICS MARKETING: (44) 1344 865 900 (Ascot UK)  
Agere Systems Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or application.  
Copyright © 2001 Agere Systems Inc.  
All Rights Reserved  
October 2000  
DS99-033LWP-1 (Replaces DS99-033LWP)  

相关型号:

D370-10A

D370-Type Digital Uncooled Laser Module
AGERE

D370-10B

D370-Type Digital Uncooled Laser Module
AGERE

D370-10F

D370-Type Digital Uncooled Laser Module
AGERE

D370-10N

D370-Type Digital Uncooled Laser Module
AGERE

D370-20A

D370-Type Digital Uncooled Laser Module
AGERE

D370-20F

D370-Type Digital Uncooled Laser Module
AGERE

D370-20N

D370-Type Digital Uncooled Laser Module
AGERE

D3702DP

Buffer/Inverter Based Peripheral Driver, PDIP14
DYNEX

D371

D371-Type Digital Uncooled DFB Laser Module
AGERE

D371-10A

D371-Type Digital Uncooled DFB Laser Module
AGERE

D371-10F

D371-Type Digital Uncooled DFB Laser Module
AGERE

D371-10N

D371-Type Digital Uncooled DFB Laser Module
AGERE